Hi,
I've been trying to install CM 11 based on Kitkat 4.4.2 on my Xperia P. The following are the details / steps followed:
- The bootloader is unlocked
- The phone is rooted
- CWM 6.0.1.2 is installed ( I think this is the latest available for Xperia P)
1) Downloaded CM11-RC1 from the links in this thread http://forum.xda-developers.com/showthread.php?t=2626639
2) Modified 'updater-script' to get rid of Error 7
3) Extracted 'boot.img' and flashed it using FlashTool in fastboot mode.
After reboot, the phone stops at Sony logo and vibrates once.
4) Pressed the Power button to load CWM Recovery
5) Wiped Data, Cache/Partition, Dalvik Cache
6) Tried to install CM11-RC1 zip file using CWM
Now I get the message "Installation aborted", as soon as the installation begins, without any error code being displayed
I can't seem to get past this step, and don't know where I'm going wrong.
Can anyone please help me out?
Are you sure that your phone is unlocked bootloader ? Did you unlocked yourself ? And you should not change anything in update script because i had flash this rom without problem ...
Sent from my Xperia P using Tapatalk 2
-ss- said:
Are you sure that your phone is unlocked bootloader ? Did you unlocked yourself ? And you should not change anything in update script because i had flash this rom without problem ...
Sent from my Xperia P using Tapatalk 2
Click to expand...
Click to collapse
Yes. The bootloader is unlocked. I did it myself following the instructions on the Sony website.
The installation shows an error 7 if I don't modify the updater script.
Delete sorry
Sent from my Xperia P using Tapatalk
yomayne said:
Yes. The bootloader is unlocked. I did it myself following the instructions on the Sony website.
The installation shows an error 7 if I don't modify the updater script.
Click to expand...
Click to collapse
What i have done with flashing this rom was just followed the OP : format system, format data and format catch then flash ROM and gapps without problem ...
Sent from my Xperia P using Tapatalk 2
-ss- said:
What i have done with flashing this rom was just followed the OP : format system, format data and format catch then flash ROM and gapps without problem ...
Sent from my Xperia P using Tapatalk 2
Click to expand...
Click to collapse
Could it be a version issue? Which one did you flash? I did RC1
Hey I had exactly the same problem. What I did was this:
I used Sony Mobile EMMA to re-install latest stock firmware.
After that I rooted it and Installed CWM 1.0 Nypon, I believe this is CWM somewhere in V6.xxxx (other versions wouldn't work for me..)
I also edited the updater script because it wouldn't pass the assert section, so I deleted this.
After that Recompiled it, (Zip format ofcourse) and copied it to SD card.
Next, I flashed boot.img and rebooted the phone after that. Then access CWM.
Now what I did was userdata/factory reset after that I deleted cache, and last but not least dalvik cache.
After that I flashed the recompiled ROM file and then It passed the status 7 error.
When that was finished I flashed gapps
This was what I did, becuz' I had exactly the same problem. I don't know if this works for you but you might give it a try.
(Sorry for bad Englisch)
(Make sure that your bootloader is unlocked! (To verify, I did try to unlock it again. Then I got a message saying that it was allready unlocked)
ReplayMitta said:
Hey I had exactly the same problem. What I did was this:
I used Sony Mobile EMMA to re-install latest stock firmware.
After that I rooted it and Installed CWM 1.0 Nypon, I believe this is CWM somewhere in V6.xxxx (other versions wouldn't work for me..)
I also edited the updater script because it wouldn't pass the assert section, so I deleted this.
After that Recompiled it, (Zip format ofcourse) and copied it to SD card.
Next, I flashed boot.img and rebooted the phone after that. Then access CWM.
Now what I did was userdata/factory reset after that I deleted cache, and last but not least dalvik cache.
After that I flashed the recompiled ROM file and then It passed the status 7 error.
When that was finished I flashed gapps
This was what I did, becuz' I had exactly the same problem. I don't know if this works for you but you might give it a try.
(Sorry for bad Englisch)
(Make sure that your bootloader is unlocked! (To verify, I did try to unlock it again. Then I got a message saying that it was allready unlocked)
Click to expand...
Click to collapse
Thanks. I'll try doing that. Let's see if it works. Which CM11 build did you flash?
yomayne said:
Thanks. I'll try doing that. Let's see if it works. Which CM11 build did you flash?
Click to expand...
Click to collapse
I flashed RC1 also, I tried almost all nightly's and the RC1 lol but they all wouldn't work before I used this sort of 'method'
Yesterday RC1 workied succesfully for me, today I updated to nightly 25 and everything works fine. Note that once you get passed the installation of RC1, that you can only access the CWM recovery with holding the power button, when your phone vibrates when you see the sony logo.. The CW11 comes with CMW touchable. Goodluck
And did it work?
I've solved my status 7 problem with this video ;
http://www.youtube.com/watch?v=QW1znjDLe-k
gilgin said:
I've solved my status 7 problem with this video ;
http://www.youtube.com/watch?v=QW1znjDLe-k
Click to expand...
Click to collapse
Auful way way to "fix" things.
You can "fix" galaxy ROM to be installed on your phone and brick it permanently, it's already been done.
If you have flashed galaxy kernel you probably won't be able to boot but still able to recover.
Tha asserts are there for a reason.
ChikeD said:
Auful way way to "fix" things.
You can "fix" galaxy ROM to be installed on your phone and brick it permanently, it's already been done.
If you have flashed galaxy kernel you probably won't be able to boot but still able to recover.
Tha asserts are there for a reason.
Click to expand...
Click to collapse
I didn't flash a wrong kernel or rom. İf friend is sure of the right pack to flash, than he can use this method.
I wanted to flash cm nightly 25 (percy's rom) to my xperia p, and the cwm gave status 7 error. Then i have searched a solution for my problem, and i found this video and did what he shows in the video, and i have a cm11 flashed xperia p now. And i also flashed over cm11-weekly.
(sorry if i have a bad english)
gilgin said:
I didn't flash a wrong kernel or rom. İf friend is sure of the right pack to flash, than he can use this method.
I wanted to flash cm nightly 25 (percy's rom) to my xperia p, and the cwm gave status 7 error. Then i have searched a solution for my problem, and i found this video and did what he shows in the video, and i have a cm11 flashed xperia p now. And i also flashed over cm11-weekly.
(sorry if i have a bad english)
Click to expand...
Click to collapse
Sp they released a ROM that cannot be flushed, is that what you say? And no one else reporting it?
Somehow I find it difficult to believe.
If you have followed the instructions I'm sure there would be no problem, or the instructions are incomplete, or there is some issue, either way it's up to the developer to fix it.
Avoid "fixing" errors in this manner or one day you may regret it dearly.
ChikeD said:
Sp they released a ROM that cannot be flushed, is that what you say? And no one else reporting it?
Somehow I find it difficult to believe.
If you have followed the instructions I'm sure there would be no problem, or the instructions are incomplete, or there is some issue, either way it's up to the developer to fix it.
Avoid "fixing" errors in this manner or one day you may regret it dearly.
Click to expand...
Click to collapse
I have followed the instructions in a good way and this was the problem i have lived. Some of my friends lived this problem in a Turkish Forum and i recommended this way, they did it and flash the rom. I will give the link here; http://forum.donanimhaber.com/m_58138440/mpage_242/f_//tm.htm#87204228
My nick is ENG_civ on that forum. Everything is right about the rom but something goes in a wrong way, so this way makes the compiler not asking "is this right rom?", that's all. İn my opinion, if you are sure of the rom, there is no risk.
And i am new in this forum, and i couldn't write at development part, and this is the first time i am writing to a foreign language forum. So i couldn't reported them, and these rom's are not the final, so there could be faults on them i think.
gilgin said:
I've solved my status 7 problem with this video ;
(video)
Click to expand...
Click to collapse
I solved the problem with the CM11 this way too. But when I tried to install gapps after install cm11 appear the "status 7". What can I do?
Edit: I can flash the normal cm11 (without edit the .txt) but the problem with the gapps continues. I turned on my phone and then the cyanogenmod logo start running and don't leave this screen. Anyone can help me?
Error:
set_metadata_recursive: some changes failed
E:Error in /storage/sdcard0/gapps-kk-20140105.signed.zip (status 7)
Installation aborted.
nortonz said:
I solved the problem with the CM11 this way too. But when I tried to install gapps after install cm11 appear the "status 7". What can I do?
Edit: I can flash the normal cm11 (without edit the .txt) but the problem with the gapps continues. I turned on my phone and then the cyanogenmod logo start running and don't leave this screen. Anyone can help me?
Error:
set_metadata_recursive: some changes failed
E:Error in /storage/sdcard0/gapps-kk-20140105.signed.zip (status 7)
Installation aborted.
Click to expand...
Click to collapse
For gapps its normal. Its actually flashed
Sent from my Xperia P using Tapatalk
AndroidNoob69 said:
For gapps its normal. Its actually flashed
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
How "normal" ?
PS: now my celphone has cyanogenmod 11 ! I'm so glad and grateful for this post!
nortonz said:
How "normal" ?
Click to expand...
Click to collapse
'normal' as in everyone has it. The zip is actually flashed.
Sent from my Xperia P using Tapatalk
It worked!
Thanks so much ! I'm finally running 4.4.2
Related
Hi,
i have a xperia Live wt19i. I followed this istruction http://forum.xda-developers.com/showthread.php?t=1695514 to root the phone.
Then I installed CWM with the application X-part in the market.
Everything went ok so far.
So in the CWM i flashed the Real ICS Lite zip but when the phone rebooted i got a bootloop on the Sony logo.
I can't get to the recovery and FlashTool reports error when i try to flash stock roms.
Can someone help me?
i laughed a little.im soo jelaous at the LWW users.anyways,try again with flashtool.you got the error maybe cuz you dont have the drivers.
shadik555 said:
i laughed a little.im soo jelaous at the LWW users.anyways,try again with flashtool.you got the error maybe cuz you dont have the drivers.
Click to expand...
Click to collapse
I already flashed with Flashtool, there are no problem with the drivers
q123ita said:
I already flashed with Flashtool, there are no problem with the drivers
Click to expand...
Click to collapse
ok i installed flashtool on linux machine and it did correctly flash stock ics.
Anyway i want to install a custom rom and avoid bootloops.
q123ita said:
ok i installed flashtool on linux machine and it did correctly flash stock ics.
Anyway i want to install a custom rom and avoid bootloops.
Click to expand...
Click to collapse
Did you install it with the given instruction on the post to the letter, and did you install Facebook in aroma installer when doing it? i know that causes the bootloop, anyway reroot your current ics firmware, then try again.
q123ita said:
Hi,
i have a xperia Live wt19i. I followed this istruction http://forum.xda-developers.com/showthread.php?t=1695514 to root the phone.
Then I installed CWM with the application X-part in the market.
Everything went ok so far.
So in the CWM i flashed the Real ICS Lite zip but when the phone rebooted i got a bootloop on the Sony logo.
I can't get to the recovery and FlashTool reports error when i try to flash stock roms.
Can someone help me?
Click to expand...
Click to collapse
are you using correct kernel for ur new rom, this may be the cause of bootloop
what error flashtool is showing?
alu7616 said:
Did you install it with the given instruction on the post to the letter, and did you install Facebook in aroma installer when doing it? i know that causes the bootloop, anyway reroot your current ics firmware, then try again.
Click to expand...
Click to collapse
thank you, i will try to reinstall it with Facebook checked.
one more question, should i wipe caches in CWM before lauch aroma installer?
yy.yogesh007 said:
are you using correct kernel for ur new rom, this may be the cause of bootloop
what error flashtool is showing?
Click to expand...
Click to collapse
I didn't flash any kernel because it wasn't asked in the installation instructions. I thought it was included in the zip file.
i tried ir again and i got another bootload
You must see instructions, if there is a kernel/boot.img to flash, you have to flash it. But that only works if your bootloader is unlocked. Maybe try another rom than realics
It happened the same to me ... The problem Is with kernel.. You should flash recommended kernel for the given Rom ... Bootloop will be the thing of past ...
Sent from my WT19i using xda app-developers app
Real ICS does supports locked bootloader, just make sure that in aroma installer u selec the the lock bl option and the right phone model and it should work. u can also try unlocking your bl and flash to custom kernel
You have to flash correct kernel attach to the ROM
I am trying to flash the new FXP rom on my Xperia P but i keep getting this error :
Code:
format() expects 4 args, got 5
E:Error in 'location of the zip file comes here'
(Status 7)
Any idea on how to fix this ??
I have CWM-based recovery v6.0.1.2 by [email protected]
Open the updater script and delete the first 3 lines that say LT22i. Then flash again
Sent from my ST25i using Tapatalk 2
You have wiped system.
Do never wipe system. It is used to verify that you are trying to install it on the correct device.
Rapier07 said:
Open the updater script and delete the first 3 lines that say LT22i. Then flash again
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
that doesnt work
DavidMKD said:
that doesnt work
Click to expand...
Click to collapse
Go to "CWM"->"install zip from sdcard"->"toggle signature verification".
Then try to install the edited ROM.
hnl_dk said:
Go to "CWM"->"install zip from sdcard"->"toggle signature verification".
Then try to install the edited ROM.
Click to expand...
Click to collapse
still the same error. I tried that even when I had the first error.
DavidMKD said:
still the same error. I tried that even when I had the first error.
Click to expand...
Click to collapse
The first error is because system has been wiped, so it will only help, if the assert has been removed.
What you could do, is to try to temporarily install a ROM, that does not check for what device it is installed on.
When that is done, are you able to install the FXP ROM, as the other one will setup a new system partition.
What did he exactly wrong ?
It should be?
Wipe cache
Wipe dalvik cache
Format system
Install fxp
Enjoy
Thx
thebrainkafka said:
What did he exactly wrong ?
It should be?
Wipe cache
Wipe dalvik cache
Format system
Install fxp
Enjoy
Thx
Click to expand...
Click to collapse
You may not wipe/format system.
The installation does need system, so make sure that it is installed on the correct phone.
So never wipe/format system yourself.
If it is needed, will the install script do it by itself, when it is needed.
Ok, and there are no issue with older files Which maybe not cleared during Installation when going from gb to ics?
Thx
Hello, I have the same issue, if it can help I solve it by replace the "update-binary" with one I take in a Rom which install well
Excuse for my english.
This may hep you
sau94 said:
I am trying to flash the new FXP rom on my Xperia P but i keep getting this error :
Code:
format() expects 4 args, got 5
E:Error in 'location of the zip file comes here'
(Status 7)
Any idea on how to fix this ??
I have CWM-based recovery v6.0.1.2 by [email protected]
Click to expand...
Click to collapse
I had the same problem when I was flashing MIUI rom weekly update to my Galaxy S3.
When I had this error, I was using CWM Recovery then I flashed Philz Recovery.
I tried to flash ROM again, and It was OK.
I hope, it works for you, too.
oOWeaponXOo said:
Hello, I have the same issue, if it can help I solve it by replace the "update-binary" with one I take in a Rom which install well
Excuse for my english.
Click to expand...
Click to collapse
i got some problem too.. can u explain more details? replace "update-binary" from stock ICS rom or from other rom? my device st25i (xperia u) with xnovathor 4.4.2 Custom rom, i would down grading to Xmiui v4 ICS.
hi =) i know maybe its late but ot end this problem and to let know how to solve to anyway will got this issue the solution is to check ,before flashing the zip, the box to allow the installation of old binaries, it works with an i8260
Hi All!
I have an HTC One X+, International. I have decided to try and "play" with it and so I have Unlocked and Rooted and then tried Installing a Custom Rom, based on those instructions:
http://forum.xda-developers.com/showthread.php?t=2213910
Unlock and Root went well, and so installing TWRP (its present).
Then I got here: http://forum.xda-developers.com/showthread.php?t=2067325
After trying to install the ROM (first image then zip - followed the instructions), the device is booting with the CM logo spinning, but then it gives out an "Unfortunately, NFC Service has stopped " error...
Please help!
I tried to go back to the original restore via TWRP - no luck. The HTC screen appears and then stuck in it.
moxah1981 said:
Hi All!
I have an HTC One X+, International. I have decided to try and "play" with it and so I have Unlocked and Rooted and then tried Installing a Custom Rom, based on those instructions:
http://forum.xda-developers.com/showthread.php?t=2213910
Unlock and Root went well, and so installing TWRP (its present).
Then I got here: http://forum.xda-developers.com/showthread.php?t=2067325
After trying to install the ROM (first image then zip - followed the instructions), the device is booting with the CM logo spinning, but then it gives out an "Unfortunately, NFC Service has stopped " error...
Please help!
I tried to go back to the original restore via TWRP - no luck. The HTC screen appears and then stuck in it.
Click to expand...
Click to collapse
Try and flash another ROM & Image. It appears the ROM might not have been downloaded properly.
BTW what happened after it gave the NFC error? Did you complete the rest of the process and simply restarted the device?
flash the CORRECT kernel! read the op!!!!!!! why do you people not read?! seriously!
full wipe the rom before flashing CM on top of whatever you had before!
the rom works correct! the problem is you
Cant flash another rom
Addicted2xda said:
Try and flash another ROM & Image. It appears the ROM might not have been downloaded properly.
BTW what happened after it gave the NFC error? Did you complete the rest of the process and simply restarted the device?
Click to expand...
Click to collapse
I cant get a new rom to the device - the computer stopped recognizing it and I have no idea how to get a file on it (maybe somehow via the terminal/SDK.bat?).
After it gives the NFC error, there is an "OK' button. I hit it a few times and nothing happens. Then the screen goes off and I cant turn it back on, unless I use the power button/volume down...
I did though tried a different image... same result.
moxah1981 said:
I cant get a new rom to the device - the computer stopped recognizing it and I have no idea how to get a file on it (maybe somehow via the terminal/SDK.bat?).
After it gives the NFC error, there is an "OK' button. I hit it a few times and nothing happens. Then the screen goes off and I cant turn it back on, unless I use the power button/volume down...
I did though tried a different image... same result.
Click to expand...
Click to collapse
I am assuming you have latest ADB tools installed in your system.
You can use ADB sideload to copy ROM in the phone
When you are pressing the powerbutton + vol down - I hope you are getting to boot loader?
Lloir said:
flash the CORRECT kernel! read the op!!!!!!! why do you people not read?! seriously!
full wipe the rom before flashing CM on top of whatever you had before!
the rom works correct! the problem is you
Click to expand...
Click to collapse
Hi Lloir!
I much appreciate the personnel response and the time you took to reply to me.
Before I had the original HOX+ rom+sense and I believe I DID a full wipe
I flashed the kernel from your post. I believe that my lack of knowledge lead me to download the wrong one (?) boot-BLADE-42-201305062233
Would you be so kind and please guide me to the correct steps? I have spent several hours allready trying to fix this issue.
Once again, your (and everyone else`s) help is MUCH appreciated!
moxah1981 said:
Hi Lloir!
I much appreciate the personnel response and the time you took to reply to me.
Before I had the original HOX+ rom+sense and I believe I DID a full wipe
I flashed the kernel from your post. I believe that my lack of knowledge lead me to download the wrong one (?) boot-BLADE-42-201305062233
Would you be so kind and please guide me to the correct steps? I have spent several hours allready trying to fix this issue.
Once again, your (and everyone else`s) help is MUCH appreciated!
Click to expand...
Click to collapse
sorry for my ranty response: anyway
the kernel you need is boot-BLADE-CM10.1-whateverdatehere
not the 42 kernels, those are for AOSP\PA\AOKP
soon this won't be an issue
-Lloir
Addicted2xda said:
I am assuming you have latest ADB tools installed in your system.
You can use ADB sideload to copy ROM in the phone
When you are pressing the powerbutton + vol down - I hope you are getting to boot loader?
Click to expand...
Click to collapse
Sorry, I am going to try Lloir`s solution... You guys reply so fast that I dont manage to reply in time to all!
THANK YOU very much!
Lloir said:
sorry for my ranty response: anyway
the kernel you need is boot-BLADE-CM10.1-whateverdatehere
not the 42 kernels, those are for AOSP\PA\AOKP
soon this won't be an issue
-Lloir
Click to expand...
Click to collapse
This was FAST answer!
I see my mistake (reading comprehension) :
CM10 - for 4.1 based roms e.g. CM10 and AOKP 4.1.2
CM10.1 - ONLY for CM10.1
42 - 4.2 based roms e.g. AOKP 4.2.1 and AOSP 4.2.1
I thought that your ROM is based on the 4.2 (?)
Downloading the Kernel now.
By the way, when and how do I add the gapps?
flash kernel
flash rom
after rom flash the gapps
vensterbank said:
flash kernel
flash rom
after rom flash the gapps
Click to expand...
Click to collapse
Thank you. I already flashed kernel and rom. Phone booted up and seem to work. A few issues:
1) I did not put the gapps zip on the phone before the process.
2) Though the phone appears as a drive in Windows, I can not copy any file to it.
3) Camera says NO SD Card and exits....
Thank you for your help!
moxah1981 said:
This was FAST answer!
I see my mistake (reading comprehension) :
CM10 - for 4.1 based roms e.g. CM10 and AOKP 4.1.2
CM10.1 - ONLY for CM10.1
42 - 4.2 based roms e.g. AOKP 4.2.1 and AOSP 4.2.1
I thought that your ROM is based on the 4.2 (?)
Downloading the Kernel now.
By the way, when and how do I add the gapps?
Click to expand...
Click to collapse
Even if you install gapps after one full reboot - it won't be a problem... Actually - it's whenver you feel like
moxah1981 said:
Thank you. I already flashed kernel and rom. Phone booted up and seem to work. A few issues:
1) I did not put the gapps zip on the phone before the process.
2) Though the phone appears as a drive in Windows, I can not copy any file to it.
3) Camera says NO SD Card and exits....
Thank you for your help!
Click to expand...
Click to collapse
Go to the Lloir's thread there is a solution for it - I read. I don't remember it as I am not using AOSP / AOKP / CM ROM at the moment...
Addicted2xda said:
Even if you install gapps after one full reboot - it won't be a problem... Actually - it's whenver you feel like
Click to expand...
Click to collapse
Hi,
See my next post -
1) I cant copy any files to the phone.
2) I dont know HOW to install the gapps
Sorry for being a noob
moxah1981 said:
Hi,
See my next post -
1) I cant copy any files to the phone.
2) I dont know HOW to install the gapps
Sorry for being a noob
Click to expand...
Click to collapse
Use ADB sideload to copy the file...
I believe that will work.
Addicted2xda said:
Use ADB sideload to copy the file...
I believe that will work.
Click to expand...
Click to collapse
Thank you! What do I do AFTER I get the gapps.zip to the phone? what do I do with the TWRP?
Is this what I should do to get the zip to the phone:
Set the device into ADB sideload mode. In TWRP you do this by going to Advanced then ADB Sideload.
From the command line, type adb sideload /path/to/rom.zip
moxah1981 said:
Thank you! What do I do AFTER I get the gapps.zip to the phone? what do I do with the TWRP?
Is this what I should do to get the zip to the phone:
Set the device into ADB sideload mode. In TWRP you do this by going to Advanced then ADB Sideload.
From the command line, type adb sideload /path/to/rom.zip
Click to expand...
Click to collapse
Yup.
Then from TWRP flash the Zip.
Wipe Cache & Davlik...
Reboot...
Addicted2xda said:
Yup.
Then from TWRP flash the Zip.
Wipe Cache & Davlik...
Reboot...
Click to expand...
Click to collapse
ADB termianl says : "error: device not found"
Phone plugged to USB, debug mode etc...
Maybe I should just re-flash EVERYTHING - rom, image?
UPDATE: re-done everything, full wipe. Still camera wont work - "No sd card..." ALSO, still cant move anything to phone... help!
Gmail app?
OK, got the latest gapps. Installed.
Play Store wont open, camera says no sd card and no Gmail app (???)
moxah1981 said:
OK, got the latest gapps. Installed.
Play Store wont open, camera says no sd card and no Gmail app (???)
Click to expand...
Click to collapse
Did you create the '0' folder before flashing the ROM?
If not - would suggest you to load some other ROM...
Also, check the Lloir''s thread...
Guys I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits. I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen. So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard. It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package. Thank you. Looking forward to an earlier response
1) This isn't urgent. We get people 'crying wolf' on here all the time. Having a thread title like this is a good way to have people ignore your thread.
2) Also, using a title like [URGENT] HELP please !!! is another good way to have people ignore your thread. If you want help, you need to use a descriptive thread title
3) Unless you use sentencing/paragraphing, your OP is impossible to read. I certainly didn't read past the first line & many other people here won't unless you fix it.
MistahBungle said:
1) This isn't urgent. We get people 'crying wolf' on here all the time. Having a thread title like this is a good way to have people ignore your thread.
2) Also, using a title like [URGENT] HELP please !!! is another good way to have people ignore your thread. If you want help, you need to use a descriptive thread title
3) Unless you use sentencing/paragraphing, your OP is impossible to read. I certainly didn't read past the first line & many other people here won't unless you fix it.
Click to expand...
Click to collapse
I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits.
I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen.
So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard.
It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package
can u help me now please?? anything i can do with odin?? Thank you.
machokingjim said:
I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits.
I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen.
So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard.
It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package
can u help me now please?? anything i can do with odin?? Thank you.
Click to expand...
Click to collapse
Can u enter download mode/recovery? Do a factory reset,and see if you can boot.
GamingDj said:
Can u enter download mode/recovery? Do a factory reset,and see if you can boot.
Click to expand...
Click to collapse
I can enter recovery mode. I tried it but of no use. Wat else can i do??
I also tried flashing paranoid rom but it returned signature verification failed.
machokingjim said:
I can enter recovery mode. I tried it but of no use. Wat else can i do??
I also tried flashing paranoid rom but it returned signature verification failed.
Click to expand...
Click to collapse
Flash Siyah Kernel via Odin
GamingDj said:
Flash Siyah Kernel via Odin
Click to expand...
Click to collapse
In recovery mode odin does not detect my phone but in boot screen, where the phone is stuck, it detects. So the flashing process failed stating couldnt open COM port.
What should i do to make my phone get detected in the recovery mode via odin? I had installed clock work mod recovery manually.
Thank you vry much.
Search for Hopper8's thread Troubleshoot a failed odin flash
GamingDj said:
Search for Hopper8's thread Troubleshoot a failed odin flash
Click to expand...
Click to collapse
Thank you finally got my phone back... Thank u vry much
hi all, i'm trying to install cm 11(weekly7) nypon on Xperia P...bootloader unlocked, rooted, cwm 6.0.1.2.
i've done fastboot kernel of cyano but when i go to recovery and i start to install cyano, it gives me error status 7 installation aborted, and above there's repeated "getprop,ecc.."(i think the error is it here). could anyone help me, please?
Federicogs3 said:
hi all, i'm trying to install cm 11(weekly7) nypon on Xperia P...bootloader unlocked, rooted, cwm 6.0.1.2.
i've done fastboot kernel of cyano but when i go to recovery and i start to install cyano, it gives me error status 7 installation aborted, and above there's repeated "getprop,ecc.."(i think the error is it here). could anyone help me, please?
Click to expand...
Click to collapse
Delete the assert lines from your updater script
Update to a newer version of recovery since older recoveries don't support selinux.
Regards
MasterAwesome
MasterAwesome said:
Delete the assert lines from your updater script
Update to a newer version of recovery since older recoveries don't support selinux.
Regards
MasterAwesome
Click to expand...
Click to collapse
thanks, but i can't find a newer cwm...can you help me?
Federicogs3 said:
thanks, but i can't find a newer cwm...can you help me?
Click to expand...
Click to collapse
If your current recovery gives status 7 that means your recovery is good To go... Try deleting the asset statements in the top of updater script.
Regards
MasterAwesome
unfortunatly the phone doesn't restart the system because of cyano kernel, i've recover stock rom and i'll repeat all the procedures!
It's taking too longer to save the modified "updater script"...more than 30 minutes and it stills going on!
edit: i've downloaded zipplus because winzip gets stuck, now there's no problem and cyano is fantastic! thanks #MasterAwesome
Federicogs3 said:
unfortunatly the phone doesn't restart the system because of cyano kernel, i've recover stock rom and i'll repeat all the procedures!
It's taking too longer to save the modified "updater script"...more than 30 minutes and it stills going on!
edit: i've downloaded zipplus because winzip gets stuck, now there's no problem and cyano is fantastic! thanks #MasterAwesome
Click to expand...
Click to collapse
No problem.. I'm here to help
Regards
MasterAwesome