First of all I knew what I was getting into trying to go back to HC after upgrading to ICS. So I tried and now I am in a infinite boot loop and when I go to recovery all I see is the Android robot with an exclamation mark. Has anyone successfully recover from this? If so how did you fix it?
Sent from my Galaxy Nexus using Tapatalk
JuNyA8971 said:
First of all I knew what I was getting into trying to go back to HC after upgrading to ICS. So I tried and now I am in a infinite boot loop and when I go to recovery all I see is the Android robot with an exclamation mark. Has anyone successfully recover from this? If so how did you fix it?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Try this method :
http://forum.xda-developers.com/showpost.php?p=23128148&postcount=10
It should work
Thanks! I will give it try when I get home from work.
Sent from my Galaxy Nexus using Tapatalk
Edit: No avail. My scenario wasn't listed on that posters list. At the moment I give up, I have read around and do not see anything like my scenario. Which is:
1) Updated to ICS from HC Jap Version (Here all worked great)
2) Read you can go back to HC so I downloaded the US version of HC and pushed through mobile terminal.
3) Updated but when it rebooted all I got was the ASUS logo loop.
4) Try to go into recovery and I see a GREEN Andrioid with a Progress bar on bottom but soon turns into a Triangle with an exclamation mark. (Android is not dead).
If anyone had this same scenario and got out of it please let me know. Thank you!
Related
Hello everyone, I'm new here, and noticed no topics on developing roms for the android based SiriusXM Lynx, From what I understand, it runs on Froyo. For those of you unaware, it is a Satellite/wifi/bluetooth radio, but has android under it. A friend of mine discovered the recovery menu on his Radio today, and posted some pics.
(I would post these pics here, but I am unable to right now since I am new)
Anyone think this thing can get a custom Rom on this to run a regular version of android, or any neat tricks to play on this little device? my aplolgies if this is not the right place to put this thread, just wanted to know if anyone knew anything about this? thanks again guys.
Sent from my MB860 using Tapatalk 2
As a side note, I can boot into recovery, but it is stock android recovery 3e, so if someone has a lead on how to get a custom boot loader or recovery on it. If needed I can give kernel, software version, etc. I just need help getting started...thanks
Sent from my MB860 using Tapatalk 2
img.tapatalk.com/44bb89d0-f7fd-cd5d.jpg
/img.tapatalk.com/44bb89d0-f855-9bc1.jpg
/img.tapatalk.com/44bb89d0-f8e7-6ef0.jpg
img.tapatalk.com/44bb89d0-f949-e941.jpg
img.tapatalk.com/44bb89d0-f921-995b.jpg
A few pics just for reference . Any one? Any ideas? Thanks.
Sent from my MB860 using Tapatalk 2
Still the looking for help...
I am generally aloof when it comes to a lot of how this stuff works, but is there any danger/luck in trying to unlock the boot loader or change recovery via methods/updates for other, similar hardware? Thanks..
Sent from my MB860 using Tapatalk 2
Not sure if anyone has done anything with this device yet. I just updated mine today and it has a web browser now, unless it had it before and I just missed it.
Anyone have any new info on this?
Help with siriusxm lynx
I need to root my siriusxm lynx. If any body knows how to do this. Please send me some help. (updating via wifi it was some kind of error and it doesn´t work any more.
lynx stuck in update boot loop
just to bump this thread into this year...
I have a SiriusXm SXi1 (Lynx) that was performing an update and powered off and is now stuck in a bootloop. When powered on, it says "updating lynx software", gets to about 40% then says "ERROR" and power cycles each time.
I was told that holding left volume while powering up should put you into bootloader mode but this doesn't work. Can anyone confirm that this is correct? If i can get into bootloader does anyone have a firmware that i can use adb and fastboot or the SDcard to flash it?
Thanks!
To get into the bootloader, hold down the left volume button, the home softkey and the power button at the same time.
I'm having issues with my Lynx and would like to at the very least reload the stock rom and see if that clears it up but haven't found one anywhere yet. Anyone have one they would be willing to upload?
Hello, I've been trying to figure out how to completely reset and unroot my Galaxy Player 5.0 US and in the process accidentally got to the point where it won't boot and was wondering if anyone could help...
The devices will start every once in a while, does not get to a boot screen but shows a little phone with two dots beside it and beside that a yellow warning triangle followed by two more dots and then a computer beside that. Seems to be able to connect to Odin, randomly shuts off after a while then eventually starts again in a loop.
Where should I go from here?
tradeJmark said:
Hello, I've been trying to figure out how to completely reset and unroot my Galaxy Player 5.0 US and in the process accidentally got to the point where it won't boot and was wondering if anyone could help...
The devices will start every once in a while, does not get to a boot screen but shows a little phone with two dots beside it and beside that a yellow warning triangle followed by two more dots and then a computer beside that. Seems to be able to connect to Odin, randomly shuts off after a while then eventually starts again in a loop.
Where should I go from here?
Click to expand...
Click to collapse
What you are seeing is forced download mode. You can just flash a stock ROM using Odin and it will work again
Sent from my Nexus 7 using XDA Premium HD app
Supermaster34 said:
What you are seeing is forced download mode. You can just flash a stock ROM using Odin and it will work again
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
i have had the same issue before. you can use the stock rom or any kernel though i would reccommend the rom
Recently i tried to install firmware on my Galaxy tab 10.1, but it resulted in a bootloop, and now i am on the samsung screen. I tried to install the firmware with mobil Odin. The firmware i used is P7510XEULPH_P7510XXLPH_HOME.tar. I dont know what to do to get my tab working again, because when i try to boot into the recovery, i get the flicker screen.
If anybody could help me i would greatly appreciate it.
Rogoshin said:
Recently i tried to install firmware on my Galaxy tab 10.1, but it resulted in a bootloop, and now i am on the samsung screen. I tried to install the firmware with mobil Odin. The firmware i used is P7510XEULPH_P7510XXLPH_HOME.tar. I dont know what to do to get my tab working again, because when i try to boot into the recovery, i get the flicker screen.
If anybody could help me i would greatly appreciate it.
Click to expand...
Click to collapse
Sounds like you soft brick your tab. Looks like your gonna need to whip out the PC and find PC version ODIN even though the screen stuck on flicker it will still connect well at least it did when I soft bricked my SGS 2. Well good luck guy I knw I had a few days of fun when I was trying to fix mine.
Oh ya one more important thing check in your device form in Q & A Chechen sticky always a lot of useful stuff or might even find a quick fix from fellow XDA fanatic like me.
Sent from my SGH-I777 Powered Pony AOPK JB ROM Stock
VICIOUSVIC1 said:
Sounds like you soft brick your tab. Looks like your gonna need to whip out the PC and find PC version ODIN even though the screen stuck on flicker it will still connect well at least it did when I soft bricked my SGS 2. Well good luck guy I knw I had a few days of fun when I was trying to fix mine.
Oh ya one more important thing check in your device form in Q & A Chechen sticky always a lot of useful stuff or might even find a quick fix from fellow XDA fanatic like me.
Sent from my SGH-I777 Powered Pony AOPK JB ROM Stock
Click to expand...
Click to collapse
To bad for me, i use Linux. My computer is now just flashing the Samsung logo, but what happens when it runs out of battery, and can i charge it like this?
Rogoshin said:
Recently i tried to install firmware on my Galaxy tab 10.1, but it resulted in a bootloop, and now i am on the samsung screen. I tried to install the firmware with mobil Odin. The firmware i used is P7510XEULPH_P7510XXLPH_HOME.tar. I dont know what to do to get my tab working again, because when i try to boot into the recovery, i get the flicker screen.
If anybody could help me i would greatly appreciate it.
Click to expand...
Click to collapse
Not sure if you are still stuck, but if you boot into recovery and then clear cache and user data it stopped the boot looping for me...
Rogoshin said:
what happens when it runs out of battery, and can i charge it like this?
Click to expand...
Click to collapse
In theory you can switch off the tab and plug it to charge. It should charge as you do not hard brick it. If you can slash your tab via Odin, try to flash it two times, one by one not letting it to boot android and samsung logo after the first flash. After the second flash, reboot and hold the volume - button till you get into stock recovery mode. then wipe data and wipe cash. then reboot again.
So this morning and last night my phone was working perfectly until it decided to reboot, but since then it endlessly reboots show the the "Galaxy SIII GTI9300" screen. It comes up, goes black, then it shows it again. Ive looked around for other fixes but i can't enter my recovery or download mode. When entering into recover, it works for about 1 second then the phone reboots so I am unable to do anything, I can enter download for a few seconds but pressing the volume up or down to continue doesn't do anything.
I am using foxhound 2.4 and Siyah 1.9.1
I don't have an overclock, I've tested another battery so I know that isn't the issue.
I haven't done anything to it so I can't think of a reason it would be doing this. How can I fix it?
looks like sds
Any fix for it? I can't access recovery or download mode and my PC doesn't pick up my phone, should I take it in for repairs? Will they repair it with the custom ROM and kernel?
send it in, looks like it's the only option
From what I've read about SDS, I am by no means an expert, you wouldn't even be able to interact with your phone. The fact that you see the boot logo means that it isn't SDS. I am not sure what I'd do though, as you cannot enter download mode and flash a stock ROM from there.
If you send it in to service, I guess they will find out about the flash counter and modified status and all, and you would have to pay. On the other hand, if that is what it needs it might be worth it.
Sorry I'm not more helpful...
ratatattata said:
From what I've read about SDS, I am by no means an expert, you wouldn't even be able to interact with your phone. The fact that you see the boot logo means that it isn't SDS. I am not sure what I'd do though, as you cannot enter download mode and flash a stock ROM from there.
If you send it in to service, I guess they will find out about the flash counter and modified status and all, and you would have to pay. On the other hand, if that is what it needs it might be worth it.
Sorry I'm not more helpful...
Click to expand...
Click to collapse
not true, there are different kinds of SDS
nightmare1708 said:
So this morning and last night my phone was working perfectly until it decided to reboot, but since then it endlessly reboots show the the "Galaxy SIII GTI9300" screen. It comes up, goes black, then it shows it again. Ive looked around for other fixes but i can't enter my recovery or download mode. When entering into recover, it works for about 1 second then the phone reboots so I am unable to do anything, I can enter download for a few seconds but pressing the volume up or down to continue doesn't do anything.
I am using foxhound 2.4 and Siyah 1.9.1
I don't have an overclock, I've tested another battery so I know that isn't the issue.
I haven't done anything to it so I can't think of a reason it would be doing this. How can I fix it?
Click to expand...
Click to collapse
factory reset the s3,reinstall the rom or restore a nandroid backup if done one.
Sent from my Supercharged V12 Samsung Galaxy S3 using Tapatalk
have you read the post? he can't access recovery or download
Well it just seems to get worse, I no longer get the boot screen anymore, now nothing happens, my phone doesn't even come on, when i plug my phone into the charger it gets the same endless reboot loop but insteast of the "Galaxy SIII GTI9300" screen it shows he battery logo with a circle in it for a few seconds. If it try access recovery or download it just reboots again. Without the charger nothing at all happens now.
you got the answer
is your phone the 16gb blue version?
if so ... then its really certain. u have sds! and even so its good that phone is trully dead! cause if it trully dead there is no way they'll find out that your rooted and running custom rom
SnowPluralism said:
is your phone the 16gb blue version?
if so ... then its really certain. u have sds! and even so its good that phone is trully dead! cause if it trully dead there is no way they'll find out that your rooted and running custom rom
Click to expand...
Click to collapse
Mije is actuall the 32Gb Pebble, I'm also hoping that it's completely dead though because I honestly can't think of how they would even go about getting the phone to boot since the screen will only come on while on the charger so I doubt they can use anything external, I'm sending my phone in tomorrow
nightmare1708 said:
Mije is actuall the 32Gb Pebble, I'm also hoping that it's completely dead though because I honestly can't think of how they would even go about getting the phone to boot since the screen will only come on while on the charger so I doubt they can use anything external, I'm sending my phone in tomorrow
Click to expand...
Click to collapse
Do the red exclamation point appear at any time?
Sent from my GT-I9300 using XDA Premium HD app
So I sent my phone in for repairs and somehow they managed to fix it and get it back to stock. Before I gave it in I never had a red exclamation. As soon as I rooted it when I got it back it now has the red exclamation. Today my phone entered a bootloop doing the exact same thing but eventually worked. Not sure if it was the ROM. I'm considering flashing back to stock just to be safe. Doesn't seem like I can get rid of that exclamation without doing so. They sorted it out for free. I'm just worried they will say my warranty has been void next time
nightmare1708 said:
So I sent my phone in for repairs and somehow they managed to fix it and get it back to stock. Before I gave it in I never had a red exclamation. As soon as I rooted it when I got it back it now has the red exclamation. Today my phone entered a bootloop doing the exact same thing but eventually worked. Not sure if it was the ROM. I'm considering flashing back to stock just to be safe. Doesn't seem like I can get rid of that exclamation without doing so. They sorted it out for free. I'm just worried they will say my warranty has been void next time
Click to expand...
Click to collapse
Red exclamation point is the same as yellow triangle on s2 ... u need yo flash previous bootloader ... reset binary counter and then flash stock only then your warranty is back
Sent from my GT-I9300 using XDA Premium HD app
sd card
i also have 32gb pebble blue with a 64 gb sandisk class 10 sd card. not using any roms everything stock but still have the same issue. i can get mine to load up if i pull the sd card out and reset.
does anyone know if there is some kind of issue related to using that type of sd card?
try homemade jtag or buy one if you don't want to send it to anywhere
nightmare1708 said:
So this morning and last night my phone was working perfectly until it decided to reboot, but since then it endlessly reboots show the the "Galaxy SIII GTI9300" screen. It comes up, goes black, then it shows it again. Ive looked around for other fixes but i can't enter my recovery or download mode. When entering into recover, it works for about 1 second then the phone reboots so I am unable to do anything, I can enter download for a few seconds but pressing the volume up or down to continue doesn't do anything.
I am using foxhound 2.4 and Siyah 1.9.1
I don't have an overclock, I've tested another battery so I know that isn't the issue.
I haven't done anything to it so I can't think of a reason it would be doing this. How can I fix it?
Click to expand...
Click to collapse
I have the same problem but with foxhound 2.5.
What about the battery?
When I put it on, my s3 turns on itself...did the same thing happen to u?
Hoping someone might be able to help me out of a situation I have with this tablet. I have a AllWinner A33 Tablet running on Android 4.4.2 and what I have done is it the android dev options I changed the runtime from Dalvik to ART, which like normal it said it has to reboot, which it did. And now it gets stuck on the loading screen (does not reboot just stays on loading screen) and goes no further :/ I can find no information on a hard reset at all which is getting me a bit concerned.
I was hoping someone might be able to suggest or point me in the right direction of something I can try to fix this?
Many thanks to anyone that can respond
Doh!!! its ok everyone. Just as I posted the problem, I found the factory hard reest and fixed it.
Phew!!
cahax0r said:
Hoping someone might be able to help me out of a situation I have with this tablet. I have a AllWinner A33 Tablet running on Android 4.4.2 and what I have done is it the android dev options I changed the runtime from Dalvik to ART, which like normal it said it has to reboot, which it did. And now it gets stuck on the loading screen (does not reboot just stays on loading screen) and goes no further :/ I can find no information on a hard reset at all which is getting me a bit concerned.
I was hoping someone might be able to suggest or point me in the right direction of something I can try to fix this?
Many thanks to anyone that can respond
Click to expand...
Click to collapse
I guess there's sapose to be a lollipop update for this tablet I have the same one but I can't find any info on how to get it does any one know anything about this?
Sent from my SPH-L600 using Xparent Green Tapatalk 2
How did you factory reset? I have one the kids forgot a pin on and I cant get into any recovery.
Thanks
Joe
The recovery is in the settings menu
Sent from my SPH-L600 using Xparent Green Tapatalk 2