OK so i installed a EH03 GB rom to my Fascinate, i did the set up, and authenticated my phone and it said it was successful. But i cant make calls, connect to 3G or anything like that, i cant even call verizon. I can only connect to wifi. I did a hard reset, a soft rest, tried a diffrent rom, but the same problem keeps happening. Someone please help. I beg for any help, this is very important...please.......
Called verizon from my home phone...no help
aconrad12 said:
OK so i installed a EH03 GB rom to my Fascinate, i did the set up, and authenticated my phone and it said it was successful. But i cant make calls, connect to 3G or anything like that, i cant even call verizon. I can only connect to wifi. I did a hard reset, a soft rest, tried a diffrent rom, but the same problem keeps happening. Someone please help. I beg for any help, this is very important...please.......
Called verizon from my home phone...no help
Click to expand...
Click to collapse
odin eh03 again with atlas pit file and repartition checked...look up section 5 of my guide in the general section if you need links and instructions.
droidstyle said:
odin eh03 again with atlas pit file and repartition checked...look up section 5 of my guide in the general section if you need links and instructions.
Click to expand...
Click to collapse
Follwed guide same thing.... NO 3g and cant make calls
aconrad12 said:
Follwed guide same thing.... NO 3g and cant make calls
Click to expand...
Click to collapse
what radio/modem are you using?
droidstyle said:
what radio/modem are you using?
Click to expand...
Click to collapse
Im not sure, i dont remember doing anything with that, just putting the eH03 and atlas files into odin and thats it.
Continuing along droidstyle's train of thought, I think you should try flashing a new modem. Go to section 7 of his guide and flash the one called EC09. Please let us know what happens.
Just to be clear, you are a Verizon customer in the U.S., aren't you?
jawman27 said:
Continuing along droidstyle's train of thought, I think you should try flashing a new modem. Go to section 7 of his guide and flash the one called EC09. Please let us know what happens.
Just to be clear, you are a Verizon customer in the U.S., aren't you?
Click to expand...
Click to collapse
Did what you suggested with no luck, same problem.
Yes i am a verizon customer in the U.S
I should mention when i try to make a call i get a message saying "we can not authenticate your phone.
Try doing a full Odin reset, as laid out in droidstyle's guide. When you boot up, you'll be on stock bloated gingerbread. From there, do a factory reset through the Settings --> Privacy menu. When you boot back up, you'll be prompted to program your phone just as you did when you pulled it out of the box. Follow the prompts, pushing 1 to program.
Hopefully, you'll have a signal and 3g by then. If not, you may want to call Verizon. From there, you can continue following the guide to do whatever you want to do.
i think you should try activating another smart phone your line then reactivate the fascinate...also known as esn swap.
jawman27 said:
Try doing a full Odin reset, as laid out in droidstyle's guide. When you boot up, you'll be on stock bloated gingerbread. From there, do a factory reset through the Settings --> Privacy menu. When you boot back up, you'll be prompted to program your phone just as you did when you pulled it out of the box. Follow the prompts, pushing 1 to program.
Hopefully, you'll have a signal and 3g by then. If not, you may want to call Verizon. From there, you can continue following the guide to do whatever you want to do.
Click to expand...
Click to collapse
I did what you said and i still get the same problem, but one weird thing that should be mention is when i did a factor reset it doesent do the phone set up thing for me, i have to manually press *228 to do the phone authentication
Verizon could not find a solution
@droid i do not have another smartphone
Have you tried flashing back further than gingerbread? I recently came back from an mtd rom and repartotioned with the eho3 file and I am having some odd quirks my self. I have heard it said several times that eb01 is the most successful file to use when repartitioning. That was going to be my next step, it can't hurt to try for you either.
One more thing. You didn't by any chance have clear phone efs checked when you odined did you? There was some one that did that recently on here and had similar problems.
"Edit". If you did wipe your efs the meid in your phone won't match the one on your account and will cause those issues. Go into settings, about phone, status. Right down your meid then compare it to the one printed on the FCC sticker underneath your battery. If it matches then thats one thing you dont have to worry about. If it doesn't match then that would be your problem.
Even though we're not sure if this is the problem, I did find this thread for someone who had the "Phone EFS Clear" box checked:
http://forum.xda-developers.com/showthread.php?t=990939
I suppose it wouldn't hurt to go through the motions.
Was this your regular phone before all of this started, or is it a new phone for you?
I am encountering a very similar problem, just the 3g part, i can send/receive calls and texts, and ran across this thread looking for a solution. Were you able to fix it?
Related
Some background on my phone first. I thought that I bricked it a few weeks ago when I flashed a kernel for it that went to a fascinate. I thought that the showcase was and is a twin to it. But my phone would not boot up. Did some more research and ended up flashing CWM 3.0 and then PnP 3.0 and eb11 build and had a phone again. Well had no problems till yesterday when my phone just did a reboot by itself and then I had no service and under about phone several of the categories said unknown. I took it to cellsouth and left with a phone that would not even boot up! All I can do is boot in CWM but if I try flashing a anything it says either error with restoring boot image or something about updating sript and binary files. Can somebody help me out?
Check out this thread, second post after original op, it has files and process to odin the Showcase. This is most likely your best option. GO HERE
just found a link with the showcase stock file..im downloading now and will let you know if it works. had the same problem as you. now im using fascinate bases and cant get my 3g
Well I got it to where I can at least talk on it!... I flashed it back to a stock DL09 with odin. Which it now looks and acts just like a Verizon phone. So I can talk and text but has NO data of any kind unless I connect to wifi. I think that I need to flash a DJ20 or EB11 radio to it but not sure, Maybe somebody could lend there knowledge again. Thanks so far.
i was just like you...had to use that verizon rom. however i did find a c.south stock rom and got to normal.YES!! but still working on getting 3g back up. i think it messed up when i flashed another modem or somthing. i'll post link in a sec.
rooferman said:
Well I got it to where I can at least talk on it!... I flashed it back to a stock DL09 with odin. Which it now looks and acts just like a Verizon phone. So I can talk and text but has NO data of any kind unless I connect to wifi. I think that I need to flash a DJ20 or EB11 radio to it but not sure, Maybe somebody could lend there knowledge again. Thanks so far.
Click to expand...
Click to collapse
here is the link. first post has instruction and downloadhttp://forum.xda-developers.com/archive/index.php/t-1121576.html
Hello. I have a photon that was rooted and unlocked and all that. The thing is it somehow got the newest Motorola update. The question i have is can i reroot it. I would love to be able to run a different OS than just the stock one. Can someone help me here or do i have a nice paperweight
yes you can re-root it using the torpedo method. but unfortunately no unlocking at this time
foxsdaddy67 said:
yes you can re-root it using the torpedo method. but unfortunately no unlocking at this time
Click to expand...
Click to collapse
What he means is, you need to be unlocked to install a custom rom with custom kernel and you can no longer unlock. You have two rom options while still locked, but both are based off the blur you already have. You can still root, though.
from what I understand you can use boostrap recovery to install ROMs. i've yet to try it myself but others have used it
foxsdaddy67 said:
from what I understand you can use boostrap recovery to install ROMs. i've yet to try it myself but others have used it
Click to expand...
Click to collapse
Only roms without a custom kernel assuming you are still locked while using it.
Sorry.. but with "locked" you say.. bootloader, o gsm? In general at forum.. lock refers bl?
Sry, for my english :\
Thanks!
Enano08 said:
Sorry.. but with "locked" you say.. bootloader, o gsm? In general at forum.. lock refers bl?
Sry, for my english :\
Thanks!
Click to expand...
Click to collapse
Yes I'm referring to your bootloader. The gsm lock you are referring to only exists in the united states.
thanks for the info guys, well i did get the phone rooted and super user restored, see the thing is the phone was flashed and programmed for page plus, its still running on page plus service but i had 2 problems one being the nag screen to activate the phone for sprint and its constantly in roaming, i called page plus and they say yeah that will happen and no i wont be charged for it, i would be all happy if i could get the roaming off, i did however get rid of the sprint activation by deleting a apk called SprintOMADM,apk. now im not totally sure i need that apk or not but its gone now and i have no nag screen to activate it, it still makes calls just fine but im not sure im totally getting all my incoming phone calls or any notifications for voice mail, any sugestions on how i might be able to get rid of some of this stuff, like i said it was flashed rooted and unlocked before, i did use when i first had it that remote squad software but now it says it cant even read the phone, i was also told by them its probably that awsome new update 2.35. thanks alot again for your responses and ill keep popping in and out of here to see more responses
well disreguard the last post, I had some app downloaded on my phone used to flash roms... well basically what happened i restarted my phone and the app booted before the phone started and it said flash rom from zip file so i selected one that i downloaded here, and thinking it wouldnt work i selected it and hit ok, well it worked alright now the phone says Failed to boot 2, and just shows starting in RSD mode, now im screwed, I shouldnt have done that, I figured it was locked and wouldnt work now the phone is broke how can i get it back just to stock the way it was or am i totally screwed
mamba316 said:
well disreguard the last post, I had some app downloaded on my phone used to flash roms... well basically what happened i restarted my phone and the app booted before the phone started and it said flash rom from zip file so i selected one that i downloaded here, and thinking it wouldnt work i selected it and hit ok, well it worked alright now the phone says Failed to boot 2, and just shows starting in RSD mode, now im screwed, I shouldnt have done that, I figured it was locked and wouldnt work now the phone is broke how can i get it back just to stock the way it was or am i totally screwed
Click to expand...
Click to collapse
What rom did you flash and what little application did you use to flash it with? You're probably not screwed, we just need a bit of information on what steps you took.
Acvice said:
What rom did you flash and what little application did you use to flash it with? You're probably not screwed, we just need a bit of information on what steps you took.
Click to expand...
Click to collapse
well when i got that awsome update 2.35 from my son clicking yes to it, i tried just about any roms to get the phone back, first it was the electrify rom which i later find out dumb mistake on my part, anyway now and i mean right now i flashed the phone with rsd lite using the electrify rom 1FF-sunfire-user-2.3.5-4.5.1A_SUN_USC_19.0-19-release-keys-signed-USC-US..... from there i rooted the phone using the torpedo method, then i installed busybox and i forget which method i used but anyway it was all done in fastboot, once i got all that installed i downloaded a apk file system recovery which is MOTODX2_Bootstrap_signed.apk. plugged in the charger and booted up the system recovery or the bootstrap which ever you call it, and went into advanced and did a dalvik wipe i even hit fix permissions, i then hit go back and did a data- factory clear wipe, then went into install zip from sd card and i first used MOF.2.3.5.ish,v1.4.zip and that installed fine the problems i had was sometimes when i would do that i would get failed to boot 2 screen but i just used the unbrick zip that i downloaded here if anyone wants the name or link let me know, anyway.. once booted up with the MOF ish zip it would load fine but wouldnt save any settings or find any APNs or connect to any wireless networks in my house, but the wireless problem was clear it said error on it, so i knew the problem on that was it wasnt working derr. So this story is getting long now. anyway i then rebooted and turned on the bootstrap slash system recovery utility, and i installed first 2.3.x_libmoto_ril.so_198_7.zip and it aborted the install and failed. i then tried the next one in line which was 2.3.x_libmoto_ril.so_254_12.zip and that one installed fine so i rebooted and i got the failed to boot 2 screen and i did the unbrick sbf file on rsd lite and it booted fine, though still no saving of the settings and no wifi no cell service and no text or anything, I kept RSD lite open and i tried one more thing, 2.3.5sv2_198_7_radio.sbf and flashed it, the wifi for the house started working and i started getting bars on my cell service yay, well atleast i thought yay this is after weeks of not having a cell. well i thought all is well im done and fixed. NOPE im not fixed when i try and dial a number or even activate my phone i get nothing, no dial buzzing sounds like you get normally, no any kinds of sounds the call eventually times out and says called failed retry or cancel the call, i hit retry and i get the same thing. i even tried flashing the radio to 2.3.5sv2_254_12_radio. when i used that one it would save settings but i wouldnt get any cell signal or anything. so im back to square one. I need help. this phone is about 2 steps of getting thrown out the window. I just strated working again and i need this phone to call back customers and i cant afford a regular carrier so im on pageplus the phone was originally flashed through remote squad and worked great until i let my youngest son play a SNES emulator on it and it exited out of the program for some reason and it wanted to do the system update and he hit yes and it installed and screwed up everything. All i want now is to get the phone back to somewhat normal, I can use RSD lite, CDMA workshop, QPST, DFS 4.0.0.5 and a couple others if need be i can download anything i just need to be told what files i need and what i dont need to get the phone back to normal, cuz if i dont get this phone back to normal im just going to not get another pageplus card and throw the phone away and ill be back to not being able to work. thanks to all that has responded to the post here i really do apreciate the time you all have taken to help. sorry it took so long to get back to any of you here but i still need urgent help here badly please and thank you for your time to read this i hope i gave you all the info you needed to help me
I just write this.
Calm down, read the 2.3.5 sv2 custom sbf thread one more time and start from the beginning with unbrick steps. Everytime you do that process, you will understand it more and more and your phone will start to work again. Believe me.
peetr_ said:
I just write this.
Calm down, read the 2.3.5 sv2 custom sbf thread one more time and start from the beginning with unbrick steps. Everytime you do that process, you will understand it more and more and your phone will start to work again. Believe me.
Click to expand...
Click to collapse
im getting ready to try this now thank you
mamba316 said:
well when i got that awsome update 2.35 from my son clicking yes to it, i tried just about any roms to get the phone back, first it was the electrify rom which i later find out dumb mistake on my part, anyway now and i mean right now i flashed the phone with rsd lite using the electrify rom 1FF-sunfire-user-2.3.5-4.5.1A_SUN_USC_19.0-19-release-keys-signed-USC-US..... from there i rooted the phone using the torpedo method, then i installed busybox and i forget which method i used but anyway it was all done in fastboot, once i got all that installed i downloaded a apk file system recovery which is MOTODX2_Bootstrap_signed.apk. plugged in the charger and booted up the system recovery or the bootstrap which ever you call it, and went into advanced and did a dalvik wipe i even hit fix permissions, i then hit go back and did a data- factory clear wipe, then went into install zip from sd card and i first used MOF.2.3.5.ish,v1.4.zip and that installed fine the problems i had was sometimes when i would do that i would get failed to boot 2 screen but i just used the unbrick zip that i downloaded here if anyone wants the name or link let me know, anyway.. once booted up with the MOF ish zip it would load fine but wouldnt save any settings or find any APNs or connect to any wireless networks in my house, but the wireless problem was clear it said error on it, so i knew the problem on that was it wasnt working derr. So this story is getting long now. anyway i then rebooted and turned on the bootstrap slash system recovery utility, and i installed first 2.3.x_libmoto_ril.so_198_7.zip and it aborted the install and failed. i then tried the next one in line which was 2.3.x_libmoto_ril.so_254_12.zip and that one installed fine so i rebooted and i got the failed to boot 2 screen and i did the unbrick sbf file on rsd lite and it booted fine, though still no saving of the settings and no wifi no cell service and no text or anything, I kept RSD lite open and i tried one more thing, 2.3.5sv2_198_7_radio.sbf and flashed it, the wifi for the house started working and i started getting bars on my cell service yay, well atleast i thought yay this is after weeks of not having a cell. well i thought all is well im done and fixed. NOPE im not fixed when i try and dial a number or even activate my phone i get nothing, no dial buzzing sounds like you get normally, no any kinds of sounds the call eventually times out and says called failed retry or cancel the call, i hit retry and i get the same thing. i even tried flashing the radio to 2.3.5sv2_254_12_radio. when i used that one it would save settings but i wouldnt get any cell signal or anything. so im back to square one. I need help. this phone is about 2 steps of getting thrown out the window. I just strated working again and i need this phone to call back customers and i cant afford a regular carrier so im on pageplus the phone was originally flashed through remote squad and worked great until i let my youngest son play a SNES emulator on it and it exited out of the program for some reason and it wanted to do the system update and he hit yes and it installed and screwed up everything. All i want now is to get the phone back to somewhat normal, I can use RSD lite, CDMA workshop, QPST, DFS 4.0.0.5 and a couple others if need be i can download anything i just need to be told what files i need and what i dont need to get the phone back to normal, cuz if i dont get this phone back to normal im just going to not get another pageplus card and throw the phone away and ill be back to not being able to work. thanks to all that has responded to the post here i really do apreciate the time you all have taken to help. sorry it took so long to get back to any of you here but i still need urgent help here badly please and thank you for your time to read this i hope i gave you all the info you needed to help me
Click to expand...
Click to collapse
Wow - just Wow. Unreadable. You are truly fortunate that someone actually read that and offered advice.
yes it was a long post, yes it was all jumbled together, anyway i did all the stuff recccommended and it works. the only problem im having now is, its still not lockig onto the right cell tower or something here where i live.
I Have tried Remote Squads Full Flash and other ways of manually programming it and for some reason I cannot get it to lock onto verizon towers, its like it has me permenantly locked onto sprint. when i drive down the road about 8 miles or so i can go down at the sheetz in my area and I get locked onto a verizon tower there but as soon as i move from that area I lose it and it goes back to sprint towers, I talked with Pageplus and they told me some stuff about what SID and NID i should have in but im not sure if the info was correct they told me they didnt know pennsylvavnia all that good but here is some numbers to try .. im about to melt this thing
Try roam control.
Sent from my MB855 using xda premium
I'm a casual enthusiast who has always rooted his Android phones without an issue but have run into problems with an i717 I recently bought. I've gone through quite a bit of troubleshooting over the past few days and am beaten and must ask for help. When I first bought the phone, it was woefully out of date so using Kies, I updated the phone. All was good and phone was up to 4.0.4 (or whatever the most current version is) and working perfectly unrooted. At that point, I rooted it using qbking77 instructions on YouTube. Per RootChecker I was rooted but noticed I couldn't connect to the internet without WiFi. At this point, the trains went off the track as I tried to install a stock 4.0.4 modem which didn't work, panicked and used Da_G's [Stock ODIN] ROM trying to get back to stock. At this point, I started getting error messages like "android.process.acore has stopped unexpectedly", something similar about calendar, phone won't work, etc. Also, when I go into recovery mode, I can navigate up and down with the volumes keys but can't select anything with the power key and after about 10 seconds, it goes to an ominous screen with a red triangle and exclamation point. Phone stats currently are:
Android 2.3.6
Baseband: I717UCLF6
Kernel: 2.6.35.11
Gingerbread.UCLA1
In any case I'm really bummed as I just bought this phone on Monday and have already borked it. Any help appreciated and unfortunately I am not familiar with all of the acronyms and nomenclature around here so direct links to helpful post would be useful. At this point, I just want to get to the most current stock AT&T ROM possible. Thanks in advance for your help.
I'd start here >>> http://forum.xda-developers.com/showthread.php?t=1504218 and also read this >>> http://forum.xda-developers.com/showthread.php?t=1506330 both links are a good start and should work for your situation.
daswahnsinn said:
I'd start here >>> http://forum.xda-developers.com/showthread.php?t=1504218 and also read this >>> http://forum.xda-developers.com/showthread.php?t=1506330 both links are a good start and should work for your situation.
Click to expand...
Click to collapse
Thanks for the response and as I indicated above, I have tried Da_G's methods in the 2nd link multiple times with no success. I'll go through the steps in the first link and see what happens. I am looking for something to wipe the phone completely clean as there is not a thing on it I need. Hopefully these will do the business. One thing that I am not able to sort out is how to tell if a ROM comes with a modem, how to tell from the settings on my phone if a proper modem is installed and if I need to install a modem, how to tell which is the correct modem for the ROM installed. I have read quite a bit on modems but there is just so much information I'm honestly a little confused. Thanks again for your input and I'll post up results later tonight when I have time to troubleshoot.
Looks like you are on a GB rom (2.3.6) with ICS (4.0.4) modem. You can flash a GB modem or use KIES firmware upgrade and initialization to put you back to completely stock ICS (UCLF6)
http://forum.xda-developers.com/showpost.php?p=27869730&postcount=1
Title says GB because that was the latest supported ROM at the time of posting. This will put you back to stock UCLF6.
rsfinsrq said:
Looks like you are on a GB rom (2.3.6) with ICS (4.0.4) modem. You can flash a GB modem or use KIES firmware upgrade and initialization to put you back to completely stock ICS (UCLF6)
http://forum.xda-developers.com/showpost.php?p=27869730&postcount=1
Title says GB because that was the latest supported ROM at the time of posting. This will put you back to stock UCLF6.
Click to expand...
Click to collapse
I had a feeling it had something to do with the modem. I did a search for GB modems and am overwhelmed by the amount of options! I found this link: http://forum.xda-developers.com/showthread.php?t=1764210 but am unsure what the numerical designators are; EL 26, EL29, etc. Do these make a difference for what I am trying to do? Thanks for posting up and helping out. Can't wait to get home and get this damn phone sorted out.
Forget the modem -- there's no such thing as a GB or ICS modem -- they are independent of the android version.
What you have is the LATEST modem, so that part is OK.
The crazy error messages you're getting are from multiple flashes without cache wipes and system wipes.
The LF6 is year and month of release in samsungese.
Did you install a custom recovery, like CWR or TWRP?
That's your first move toward a good phone.
rangercaptain said:
Forget the modem -- there's no such thing as a GB or ICS modem -- they are independent of the android version.
What you have is the LATEST modem, so that part is OK.
The crazy error messages you're getting are from multiple flashes without cache wipes and system wipes.
The LF6 is year and month of release in samsungese.
Did you install a custom recovery, like CWR or TWRP?
That's your first move toward a good phone.
Click to expand...
Click to collapse
I didn't knowingly install a custom recovery unless it was built into a ROM I installed as the phone was new to me and I didn't have any data on it I felt I needed to be recovered. I now have the feeling that this isn't the type of recovery "custom recovery" is used for. I can get into "Android system recovery" through vol+/- and power if that is what you are talking about but like my original post mentioned, I can thumb up and down through the options with the volume keys but can't select anything with the power key. I was able to select with the power button upon originally installing the first 2 ROMs so I don't believe it is a hardware issue with the button. How do I tell if I have a custom recovery installed and what are the steps to take if I don't. Pardon my ignorance but I always assumed there was a way to completely wipe these devices and start over as long as you could access the device through Windows. I have nothing on this phone to save and just want to get it back to stock. I wish I could get Kies to allow me to factory reset but I keep getting the "Your device's current firmware version is not supported to update through Kies". I know we are encouraged to read and learn on our own but as in any forum this size, there is quite a bit of ambiguous information available and I am frankly lost and it also doesn't help that I seem to be having multiple issues at once. If the modem is okay, and I don't have a custom recovery installed, what is the next step? Again, thanks to all of you taking the time to help out! I know what it's like to have a passion for something and the ability to help others work their way out of issues, mine just happens to be carbureted Japanese motorcycles, not phones!
Ignore the "your device current firmware" message in KIES. Open KIES, Put your phone in download mode, connect to PC , in KIES, select tools, firmware upgrade and initialization, enter your model (SGH-I717), it will ask for the serial number so have it handy, and continue through the prompts as outlined in the aforementioned post. KIES will completely reset your device to UCLF6. (Recovery, modem, system, etc.) You will be stock un-rooted when complete.
olschl said:
I didn't knowingly install a custom recovery unless it was built into a ROM I installed as the phone was new to me and I didn't have any data on it I felt I needed to be recovered. I now have the feeling that this isn't the type of recovery "custom recovery" is used for. I can get into "Android system recovery" through vol+/- and power if that is what you are talking about but like my original post mentioned, I can thumb up and down through the options with the volume keys but can't select anything with the power key. I was able to select with the power button upon originally installing the first 2 ROMs so I don't believe it is a hardware issue with the button. How do I tell if I have a custom recovery installed and what are the steps to take if I don't. Pardon my ignorance but I always assumed there was a way to completely wipe these devices and start over as long as you could access the device through Windows. I have nothing on this phone to save and just want to get it back to stock. I wish I could get Kies to allow me to factory reset but I keep getting the "Your device's current firmware version is not supported to update through Kies". I know we are encouraged to read and learn on our own but as in any forum this size, there is quite a bit of ambiguous information available and I am frankly lost and it also doesn't help that I seem to be having multiple issues at once. If the modem is okay, and I don't have a custom recovery installed, what is the next step? Again, thanks to all of you taking the time to help out! I know what it's like to have a passion for something and the ability to help others work their way out of issues, mine just happens to be carbureted Japanese motorcycles, not phones!
Click to expand...
Click to collapse
Well thanks to rsfinsrq's advice, the phone appears to be restored! No more error messages and everything seems to be running smoothly but I still can't get internet connectivity without WiFi. I can send/receive texts and calls but no internet browsing, Google Play, etc. Under Settings-->About Phone-->Status-->Mobile Network State is listed as "Disconnected". What could be causing this? I am leery to go poking around with it this soon but would like to get the full use of the phone. Thoughts?
Settings-more settings-mobile network-enable data?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
olschl said:
Well thanks to rsfinsrq's advice, the phone appears to be restored! No more error messages and everything seems to be running smoothly but I still can't get internet connectivity without WiFi. I can send/receive texts and calls but no internet browsing, Google Play, etc. Under Settings-->About Phone-->Status-->Mobile Network State is listed as "Disconnected". What could be causing this? I am leery to go poking around with it this soon but would like to get the full use of the phone. Thoughts?
Click to expand...
Click to collapse
Reading a little more on this, it seems this might be an issue with my AT&T plan and this particular device. I'll run by the AT&T store tomorrow to see if I can get it sorted. If anyone does have any additional suggestions, post them up!
ontriano that
rsfinsrq said:
Settings-more settings-mobile network-enable data?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I checked that first and it is enabled. I toggled it off, restarted phone and then toggled it back on and still nothing. Like I said, I'll check with AT&T tomorrow and see what they say. Thanks again for taking the time to help.
rsfinsrq said:
Settings-more settings-mobile network-enable data?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Same spot, go to access point names, hit the menu button and reset to default.
Mystery solved! A trip to the AT&T store and I was told the lack of connectivity was due to my SIM card not being provisioned for an LTE enabled phone and it was "confusing" the network. 5 minutes spent getting a new SIM card and I was out the door, no muss no fuss and my very first positive experience with AT&T customer service. I guess there is a first for everything! Thanks again to everyone who helped out and I will definitely make sure I am a little more educated the next time I root and flash a ROM. Any suggestions for a stable ROM for me to start with?
Glad to hear you got it sorted out!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
All of the normal steps to moving to Ting don't work. I was told by their customer service that I would need to do a factory reset and put the phone back to OEM status in order to activate the phone on their service.
Roommate's phone that he got from one of his friends who had given him the phone already rooted and possibly a custom rom...not sure. I found "Gummy Settings" in the system settings so I think it is a custom rom. The fact that he already had it rooted means he has no idea what was used to root it or anything like that.
Can someone help guide me on what I need to do to get it back to a state that it can be setup for Ting?
I am totally lost at this point and I'm not sure if a factory reset on a custom rom would cause any permanent damage or not.
MichaelTunnell said:
All of the normal steps to moving to Ting don't work. I was told by their customer service that I would need to do a factory reset and put the phone back to OEM status in order to activate the phone on their service.
Roommate's phone that he got from one of his friends who had given him the phone already rooted and possibly a custom rom...not sure. I found "Gummy Settings" in the system settings so I think it is a custom rom. The fact that he already had it rooted means he has no idea what was used to root it or anything like that.
Can someone help guide me on what I need to do to get it back to a state that it can be setup for Ting?
I am totally lost at this point and I'm not sure if a factory reset on a custom rom would cause any permanent damage or not.
Click to expand...
Click to collapse
Rooted won't keep the phone from activating, a custom ROM might or might not depending on the ROM.
The "normal" way to activate a used Photon on Sprint or a Sprint MVNO like Ting is:
1. Set up an account with Ting and enter the MEID on the "Enter ESN" screen. Be sure that Ting accepts the MEID as valid and able to be used.
2. Do a factory reset. The reset will not harm the custom ROM if there is one. It will however delete all contacts, accounts, ringtones, saved messages, user installed apps, etc.
3. After you reset the phone it will restart and run hands free activation which will activate the phone on the network. Hands free sometimes fails but it will give you an option to retry. You may have to retry a few times especially if coverage is bad.
If handsfree fails, post the Android version, Baseband version and Build number from the Settings > About phone screen and some one here may be able to tell you what ROM you have and how to get it to activate.
Here is a screenshot
I have taken a screenshot of the "About Phone" portion of the Settings and attached it to this post. Hopefully this will help narrow down what needs to be done.
MichaelTunnell said:
I have taken a screenshot of the "About Phone" portion of the Settings and attached it to this post. Hopefully this will help narrow down what needs to be done.
Click to expand...
Click to collapse
Definitely a custom ROM. Have you tried a factory reset yet?
yeswap said:
Definitely a custom ROM. Have you tried a factory reset yet?
Click to expand...
Click to collapse
No I have not because I was told on a different site that doing the reset may mess up the phone depending on the ROM and since I have never heard of this ROM, I decided not to risk it without further information or someone who knows more than me (not hard to do) could guide me on the next best step.
MichaelTunnell said:
No I have not because I was told on a different site that doing the reset may mess up the phone depending on the ROM and since I have never heard of this ROM, I decided not to risk it without further information or someone who knows more than me (not hard to do) could guide me on the next best step.
Click to expand...
Click to collapse
The ROM you're running is Gummy 1.2.2. I'm not familiar with that ROM but the ROM thread is here: http://forum.xda-developers.com/showthread.php?t=1633931 I recommend reading the entire thread and if you still have concerns about factory resetting or activating, post your questions in that thread.
If you want to go back to stock see the last part ("Return to Stock/Relocking via FullSBF flash") of post 6 of Lokifish's excellent "!!!LOOK HERE FIRST!!! Motorola Photon Compendium a.k.a. all things MoPho 06/11/12" thread at http://forum.xda-developers.com/showthread.php?t=1393519
Hey guys,
So I got a real doozy here...
I flashed my Verizon Note 2 (SCH-I605) to the SOKP Rom from a Jedi X Rom (v13 I believe). After the flash, I noticed my network was not working. Eventually I found out that the device was registering as a GT-7105. Not sure what went wrong, as the rom was flashed with no errors. I also ensured that my recovery was on the appropriate version (TWRP 2.6.3.3 in this case) and I also did a factory reset. To try and rectify the issue I wiped the phone and tried various other roms. In every one of those cases I found that the phone was constantly roaming. I had checked my network mode and tried switching between Global and LTE/CDMA which did nothing. Being completely out of options, I just installed to a stock rom through Odin (VRAMC3 4.1.2) and let it update via Wifi to 4.3 and still nothing. (I am well aware of the Knox security feature and will address this in a moment)
Here are the different ways I tried to diagnose the issue after this that led nowhere:
1. Made contact with a Tier-2 specialist from Verizon that tried various diagnostic methods and found that my phone was simply not registering on the Verizon network, or ANY other network for that matter.
2. I went to a Verizon store and got my SIM card replaced.
3. I even went to a repair shop to see if the phone possibly had a faulty connection.
I have already verified that the IMEI is correct based on the sticker behind the battery. The PRL is on 15310. The very last thing I tried was entering "getprop" inside a terminal. I'm taking a guess here, but I noticed my ril.serialnumber was all 0s. Could this be the problem? If there's anymore information someone needs, I'll be happy to post it up. Just hoping I can get a little direction here. If I need to root my phone again to try something, I am more than willing to. My phone is out of warranty and not insured, I'm not really concerned about the Knox warranty trigger unless it will render my phone completely unusable.
jvar105 said:
Hey guys,
So I got a real doozy here...
I flashed my Verizon Note 2 (SCH-I605) to the SOKP Rom from a Jedi X Rom (v13 I believe). After the flash, I noticed my network was not working. Eventually I found out that the device was registering as a GT-7105. Not sure what went wrong, as the rom was flashed with no errors. I also ensured that my recovery was on the appropriate version (TWRP 2.6.3.3 in this case) and I also did a factory reset. To try and rectify the issue I wiped the phone and tried various other roms. In every one of those cases I found that the phone was constantly roaming. I had checked my network mode and tried switching between Global and LTE/CDMA which did nothing. Being completely out of options, I just installed to a stock rom through Odin (VRAMC3 4.1.2) and let it update via Wifi to 4.3 and still nothing. (I am well aware of the Knox security feature and will address this in a moment)
Here are the different ways I tried to diagnose the issue after this that led nowhere:
1. Made contact with a Tier-2 specialist from Verizon that tried various diagnostic methods and found that my phone was simply not registering on the Verizon network, or ANY other network for that matter.
2. I went to a Verizon store and got my SIM card replaced.
3. I even went to a repair shop to see if the phone possibly had a faulty connection.
I have already verified that the IMEI is correct based on the sticker behind the battery. The PRL is on 15310. The very last thing I tried was entering "getprop" inside a terminal. I'm taking a guess here, but I noticed my ril.serialnumber was all 0s. Could this be the problem? If there's anymore information someone needs, I'll be happy to post it up. Just hoping I can get a little direction here. If I need to root my phone again to try something, I am more than willing to. My phone is out of warranty and not insured, I'm not really concerned about the Knox warranty trigger unless it will render my phone completely unusable.
Click to expand...
Click to collapse
If updating the Profile and PRL on a stock based rom doesn't get it back, then you might have corrupted your EFS partition. I don't suppose you used TWRP to back up the EFS partition when you did a nandroid?
FYI: Doesn't matter what the phone is listed as (n7105) for connecting to the network. It's just a build.prop edit away from saying whatever you want it to.
es0tericcha0s said:
If updating the Profile and PRL on a stock based rom doesn't get it back, then you might have corrupted your EFS partition. I don't suppose you used TWRP to back up the EFS partition when you did a nandroid?
FYI: Doesn't matter what the phone is listed as (n7105) for connecting to the network. It's just a build.prop edit away from saying whatever you want it to.
Click to expand...
Click to collapse
Unfortunately, I did not back up the EFS partition. I'm guessing I should try and restore this somehow?
jvar105 said:
Unfortunately, I did not back up the EFS partition. I'm guessing I should try and restore this somehow?
Click to expand...
Click to collapse
Can't restore what wasn't backed up. The efs is unique to your phone. In some cases you can use another part of another phone's efs partition, but not always and is gonna be a huge hassle either way. But yea, I think you're in a pretty tricky situation. I was reading on another forum that the serial number being 0 shouldn't cause this issue though, so not really sure what to think. Usually when this sort of thing happens, the IMEI gets messed up too. Updating Profile and PRL didn't help?
es0tericcha0s said:
Can't restore what wasn't backed up. The efs is unique to your phone. In some cases you can use another part of another phone's efs partition, but not always and is gonna be a huge hassle either way. But yea, I think you're in a pretty tricky situation. I was reading on another forum that the serial number being 0 shouldn't cause this issue though, so not really sure what to think. Usually when this sort of thing happens, the IMEI gets messed up too. Updating Profile and PRL didn't help?
Click to expand...
Click to collapse
I guess that'll be the next step for me. I didn't want to go through the hassle without making sure. Please send me the links on how to do this if they are available.
jvar105 said:
I guess that'll be the next step for me. I didn't want to go through the hassle without making sure. Please send me the links on how to do this if they are available.
Click to expand...
Click to collapse
I don't have a Note 2 in front of me, but generally it should be in Settings / About Phone / Update or Software Update and for most Samsung CDMA phones, the Profile and PRL options are in or around there.
es0tericcha0s said:
I don't have a Note 2 in front of me, but generally it should be in Settings / About Phone / Update or Software Update and for most Samsung CDMA phones, the Profile and PRL options are in or around there.
Click to expand...
Click to collapse
Yeah, it's actually in the Status section. It does not allow me to edit anything in this area. I don't see anything that says Profile.
Hmm I guess VZW decided you don't need to have access to those functions. Weird. Sorry man, I dunno what to tell you at this stage.
Edit: Found this -
"The only acceptable way to update it on LTE phones is to take the SIM out, boot the phone back up, let it sit for 5 or 10 minutes, power off, reinsert SIM, reboot phone. That's the only one I know of, there may be other ways to do it but that is the easiest."
Not sure if it will help, but certainly isn't going to make it any worse. What baseband version do you have installed?
First thing you need to do is write down your IMEI number. You do NOT want to lose that. Seriously, write it down with a pen. Also your serial number and anything else you find in the EFS partition you might need that's specific to your phone. THEN: at this point it sounds like you'll have to find someone's EFS partition. I've seen it around on XDA multiple times as I've gone through threads similar to this one. Once you find an SCH-i605 efs you'll have to flash/replace/edit yours somehow, try editing your own first to match the same values as your peer's. Don't replace personal information tho. If you end up replacing it you'll have to go in and re-enter your own IMEI number somehow. I am not an expert on how you can do this, but stated here is/would be the process.
--
Say thanks if I was of help,
Sent from my SCH-I605 using XDA Free mobile app
es0tericcha0s said:
Hmm I guess VZW decided you don't need to have access to those functions. Weird. Sorry man, I dunno what to tell you at this stage.
Edit: Found this -
"The only acceptable way to update it on LTE phones is to take the SIM out, boot the phone back up, let it sit for 5 or 10 minutes, power off, reinsert SIM, reboot phone. That's the only one I know of, there may be other ways to do it but that is the easiest."
Not sure if it will help, but certainly isn't going to make it any worse. What baseband version do you have installed?
Click to expand...
Click to collapse
I tried this and still no luck. My baseband is I605VRUAND3.
aarongillion63 said:
First thing you need to do is write down your IMEI number. You do NOT want to lose that. Seriously, write it down with a pen. Also your serial number and anything else you find in the EFS partition you might need that's specific to your phone. THEN: at this point it sounds like you'll have to find someone's EFS partition. I've seen it around on XDA multiple times as I've gone through threads similar to this one. Once you find an SCH-i605 efs you'll have to flash/replace/edit yours somehow, try editing your own first to match the same values as your peer's. Don't replace personal information tho. If you end up replacing it you'll have to go in and re-enter your own IMEI number somehow. I am not an expert on how you can do this, but stated here is/would be the process.
--
Say thanks if I was of help,
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks, I'll see if I can hunt down an EFS partition that fits my phone. Considering I haven't had any luck yet...I'm not too hopeful in finding one.
jvar105 said:
I tried this and still no luck. My baseband is I605VRUAND3.
Thanks, I'll see if I can hunt down an EFS partition that fits my phone. Considering I haven't had any luck yet...I'm not too hopeful in finding one.
Click to expand...
Click to collapse
Hey guys, I just gave up and traded it in for an S5. I knew a guy so it was a good deal. I appreciate all the help!