Related
Not sure why but setcpu is asking for permissions like all the time. I see it all the time at the bottom of the screen
Setcpu has been granted superuser permissions
And one have any idea on why and how to fix this
E3D
CheesyNutz said:
Not sure why but setcpu is asking for permissions like all the time. I see it all the time at the bottom of the screen
Setcpu has been granted superuser permissions
And one have any idea on why and how to fix this
E3D
Click to expand...
Click to collapse
It asks every minute, that's how it works, since SetCPU is always running and using root. You need to turn off show notifications in Superuser to make it stop displaying it.
In app, Settings (top right corner, not menu button) > Notifications > Uncheck the tick box for notifications.
BlaydeX15 said:
It asks every minute, that's how it works, since SetCPU is always running and using root. You need to turn off show notifications in Superuser to make it stop displaying it.
In app, Settings (top right corner, not menu button) > Notifications > Uncheck the tick box for notifications.
Click to expand...
Click to collapse
Ahh ok thanks
E3D
BlaydeX15 said:
It asks every minute, that's how it works, since SetCPU is always running and using root. You need to turn off show notifications in Superuser to make it stop displaying it.
In app, Settings (top right corner, not menu button) > Notifications > Uncheck the tick box for notifications.
Click to expand...
Click to collapse
can anyone confirm this is all it is? It happens to my 3d too but never occured on my og evo and I never had to un check notifications to get them to stop
Sent from my PG86100 using XDA App
It is happening with me as well, after a while I just went an unchecked notifications for it to stop.
CheesyNutz said:
Not sure why but setcpu is asking for permissions like all the time. I see it all the time at the bottom of the screen
Setcpu has been granted superuser permissions
And one have any idea on why and how to fix this
E3D
Click to expand...
Click to collapse
+1 something isn't right
Sent from my PG86100 using Tapatalk
I also get a set cpu force close on a reboot any one else notice that?
Sent from my PG86100 using XDA App
It's probably the kernel your using. I just flashed the silver needle kernel by Net and now I keep getting Set CPU notifications. It's easy to to unchecke the notifications in SU app so no biggie. Previous kernel I flashed didn't have the issue though.
My ''xDU4L C0R3 SH00T3Rx'' shot you down in 3D!
It has been brought to my attention this fix does not stick through reboot or wifi cycle. I will mess around with the editor some more however I fear without modifying the framework it may not be possible to completely be rid of it. Moderator can lock the thread please.
have discovered how to remove the constant notification that wifi is off. You must be rooted (thanks to the devs who made that happen) and have SQLite Editor installed.
It is available from the Google Play Store for 2.99. https://play.google.com/store/apps/details?id=com.speedsoftware.sqleditor&feature=search_result#?t=W251bGwsMSwyLDEsImNvbS5zcGVlZHNvZnR3YXJlLnNxbGVkaXRvciJd
Open SQLite, allow root access and navigate down to "Settings storage". Click it then click "settings.db" then "secure". The last line (351 on my device) is entitled wifi_watchdog_on and the value is listed as 1. Click on this then click the pen in the upper center corner to edit the value. Change it to a 0 (zero) and click save. Back out of the app then pull down your notification shade. Long press on the *&#%$* wifi nag until "app info" is shown. Click it then select force close. It will give you the standard warning but don't worry about it.
After these steps are taken the nag will be gone! Hope it helps someone who is irritated like I was.
Thank you for this! Worked perfectly
Sent from my SCH-I605 using Tapatalk 2
Thanks!
Thank you very much!!
This worked, but once I turned wifi back on it came back once I disconnected. Anyway to make it permanent?
Doesn't stick for me, the nag comes back and the setting goes back to 1 after a reboot...
is there a way to do this for the blocking mode nag as well?
Sent from my SCH-I605 using xda premium
coming back on for me as well.
Can this be done with the FREE SQLite Manager app?
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS54dWVjcy5zcWxpdGVtYW5hZ2VyIl0.
If you forcefully uninstall the WiFi nag app, will this prevent it from relaunching everytime you reboot or turn WiFi on?
The app info of the wifi nag said it was Android System
FMXP said:
Can this be done with the FREE SQLite Manager app?
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS54dWVjcy5zcWxpdGVtYW5hZ2VyIl0.
If you forcefully uninstall the WiFi nag app, will this prevent it from relaunching everytime you reboot or turn WiFi on?
Click to expand...
Click to collapse
Well... When you long press on the wifi nag on your shade, then choose app info... it's a part of android system that you're stopping... don't know if uninstalling it is possible.
Hmm...I wonder if it's a part of the TouchWiz framework. Hopefully someone can make a hack for it which removes the Ongoing Notification, and also puts the WiFi toggle back in the Notifications Control Panel where it belongs.
You can put the WiFi icon and whatever else you want (I add a flashlight also) to the taskbar with the app "notification toggle" from the playstore.
I have used this temporarily on a few different phones while I was waiting on Custom ROMs to make their appearance.
It works perfectly.
This doesn't stick.
Sent from my SCH-I605 using xda app-developers app
Thanks everyone. I have updated the op and will continue to explore some way to make this stick.
i dunno about the toggle, but the wifi notification is probably an edit in services.jar
Sent from my SCH-I605 using Tapatalk 2
MoeDaddy said:
Doesn't stick for me, the nag comes back and the setting goes back to 1 after a reboot...
Click to expand...
Click to collapse
That's why I didn't post this info two days ago.......
BlueHarford said:
This doesn't stick.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I'm in the same boat this will not stay off I force close it and few later it comes back.
Any solutions
Sent from my Vzw GN2
Wifi Toggle
FMXP said:
Hmm...I wonder if it's a part of the TouchWiz framework. Hopefully someone can make a hack for it which removes the Ongoing Notification, and also puts the WiFi toggle back in the Notifications Control Panel where it belongs.
Click to expand...
Click to collapse
I was in the same boat with you man but there is away to add the toggle were vzw should have put it. its the best.
Heres the Link
http://forum.xda-developers.com/showthread.php?t=2030539
All Cred goes to Hairdewx
View attachment 1540118
under "Settings storage" then click "settings.db" then "secure". The last line is (125 wifi_on) not line (351 on my device) is entitled wifi_watchdog_on!
what am i doing wrong?
hi everyone! after using remix os on my yoga 500 notebook for over a week, i'm having some issues i hope someone can help me solve.
1) how do i force an app to open in phone mode? some apps have fullscreen disabled from the beginning, some can be disabled, but for example hangouts just refuses to open as a window... i have toogled the "allow all apps to switch to phone mode" in experimental settings, but i still cannot run hangouts in a window (see screenshots)
2) can the os tell me my battery is runnin out somehow? all you see is a small icon, and today i forgot to plug in my cable and the notebook just powered down without ANY warning or notification before. it simply suddenly turned itself off, like when you pull a pc out of the socket
3) is there a way to set screen brightness without having to use the dedicated physical keyboard buttons? my lenovo yoga can be put in tablet mode and then the keyboard is disabled, so there is no way of changing screen brightness (except 3rd party apps but there are only really outdated ones and they just look awful), i also have no such option in settings.
4) is it possible to have 2 different chrome tabs next to each other? in cm13's multiwindow with "merge tabs with apps" enabled in chrome, you could do just that. but there is no such option in chrome here.. and before you suggest using 2 different browsers - it sucks, i have all my account data synced with chrome.
if you have a suggestion to any of my problems, please tell me
bump
Settings/Applications
For each application, click on it and turn off "Open in fullscreen mode".
Then when you open the app, you will have access to a pull-down at top of screen. Simply select the middle symbol on the upper right and it should go into phone display. You can resize the display to suit yourself. The system remembers your settings.
Sent from my LENOVO 33476WU using XDA Labs
lollyjay said:
Settings/Applications
For each application, click on it and turn off "Open in fullscreen mode".
Then when you open the app, you will have access to a pull-down at top of screen. Simply select the middle symbol on the upper right and it should go into phone display. You can resize the display to suit yourself. The system remembers your settings.
Sent from my LENOVO 33476WU using XDA Labs
Click to expand...
Click to collapse
i have done exactly what you described, and it does work for some apps, but not for hangouts. any other idea?
FWIW the. 205 release has brightness adjustment on the taskbar if you use alt/F1 to go into terminal mode and type vi
EDIT does not work. You need to have root
Sent from my LENOVO 33476WU using XDA Labs
lollyjay said:
FWIW the. 205 release has brightness adjustment on the taskbar if you use alt/F1 to go into terminal mode and type vi
EDIT does not work. You need to have root
Sent from my LENOVO 33476WU using XDA Labs
Click to expand...
Click to collapse
Not quite the case, brightness slider was there from first alpha - it's the build.prop edit that 'enables' it.
On systemless-root I added that prop by default (via ramdisk.img) as I figured it best to enable it.
Alt/F1 would work without system root; but needs a initrd.img to mount /system rw and need to use sed or similar instead of vi
HypoTurtle said:
Not quite the case, brightness slider was there from first alpha - it's the build.prop edit that 'enables' it.
On systemless-root I added that prop by default (via ramdisk.img) as I figured it best to enable it.
Alt/F1 would work without system root; but needs a initrd.img to mount /system rw and need to use sed or similar instead of vi
Click to expand...
Click to collapse
Yes sorry I got distracted and didn't finish :silly:
Sent from my on Z00A using XDA Labs
HypoTurtle said:
Not quite the case, brightness slider was there from first alpha - it's the build.prop edit that 'enables' it.
On systemless-root I added that prop by default (via ramdisk.img) as I figured it best to enable it.
Alt/F1 would work without system root; but needs a initrd.img to mount /system rw and need to use sed or similar instead of vi
Click to expand...
Click to collapse
I was wondering where that prop entry came from...
Sent from my Nexus 7 using XDA Labs
In the process of making some SignBoard widgets for the soon-to-be-released AOSP implementation, I found out that they will also work for the Stock SignBoard. The plan for these is to have them work on both Stock and AOSP eventually, but I figured I'd share what I have so far for Stock users, so I can get some bug reports and such.
Currently, the app includes:
- An information screen, similar to LG's Immersive Mode screen
- A contacts shortcut screen
- A weather screen
- A custom image screen
The elements of the music controller and information screen can be colored using the app.
Works without root! Instructions: http://zacharywander.tk/#sswidgets_adb
If you find a problem, I'd appreciate it if you opened an issue on the GitHub repo; it helps me stay organized.
Play Store (beta opt-in): https://play.google.com/apps/testing/com.zacharee1.sswidgets
GitHub: https://github.com/zacharee/SSWidgets
its not working for some reason it says somthing isnt granted and used this in adb
adb shell pm grant com.zacharee1.sswidgets android.permission.WRITE_SECURE_SETTINGS
am not rooted
dudeawsome said:
its not working for some reason it says somthing isnt granted and used this in adb
adb shell pm grant com.zacharee1.sswidgets android.permission.WRITE_SECURE_SETTINGS
am not rooted
Click to expand...
Click to collapse
I have to look into that, but just go into the second screen settings and see if the widgets show up. The app is just to color things.
dudeawsome said:
its not working for some reason it says somthing isnt granted and used this in adb
adb shell pm grant com.zacharee1.sswidgets android.permission.WRITE_SECURE_SETTINGS
am not rooted
Click to expand...
Click to collapse
Unistall and them install again .. Thast happen to me but after I doing that the problem go away
NOTE: I'm on Root stock Rom
Doesn't work. Can't allow battery stats and system level access. Stock, no root here. Uninstalled/reinstalled, same thing.
DimidiusDeus said:
Doesn't work. Can't allow battery stats and system level access. Stock, no root here. Uninstalled/reinstalled, same thing.
Click to expand...
Click to collapse
You need to use ADB to grant those permissions without root.
Zacharee1 said:
You need to use ADB to grant those permissions without root.
Click to expand...
Click to collapse
Gotcha. I'll give that a go when I get home from work tonight.
Currently rooted (using Magisk) and accepted all of the permissions and root privileges, but my 2nd screen remained unchanged.
houboy said:
Currently rooted (using Magisk) and accepted all of the permissions and root privileges, but my 2nd screen remained unchanged.
Click to expand...
Click to collapse
It doesn't replace the second screen, it adds to it. Check Settings>>Second screen.
Zacharee1 said:
It doesn't replace the second screen, it adds to it. Check Settings>>Second screen.
Click to expand...
Click to collapse
Yes, but none of the colors have changed as to what I set them to in the app.
houboy said:
Yes, but none of the colors have changed as to what I set them to in the app.
Click to expand...
Click to collapse
Toggle the screens or reboot. There's an issue where they can freeze up after the the main screen is turned off and on.
Zacharee1 said:
Toggle the screens or reboot. There's an issue where they can freeze up after the the main screen is turned off and on.
Click to expand...
Click to collapse
Rebooted and toggled screens but still the colors are same. You can PM me to test some more if you'd like.
houboy said:
Rebooted and toggled screens but still the colors are same. You can PM me to test some more if you'd like.
Click to expand...
Click to collapse
Which colors did you change? You might see music controller colors, but those won't do anything, since the music widget is disabled/removed. However, I know for sure that the coloring works, so that's very strange.
Can confirm that this worked on my stock, unrooted, V20.
Needed to use the following two adb commands:
adb shell pm grant com.zacharee1.sswidgets android.permission.WRITE_SECURE_SETTINGS
adb shell pm grant com.zacharee1.sswidgets android.permission.BATTERY_STATS
Set some colors in the app, turned on the information screen under Settings -> Second Screen and rebooted, colors showed up!
Would it be possible to add apps to the second screen aod? If that makes sense.
Sent from my LG V20 using XDA Labs
The_Keeper86 said:
Would it be possible to add apps to the second screen aod? If that makes sense.
Sent from my LG V20 using XDA Labs
Click to expand...
Click to collapse
As far as I know, those use a different method. Or at least, LG doesn't give you options for what to enable.
russnash said:
Can confirm that this worked on my stock, unrooted, V20.
Needed to use the following two adb commands:
adb shell pm grant com.zacharee1.sswidgets android.permission.WRITE_SECURE_SETTINGS
adb shell pm grant com.zacharee1.sswidgets android.permission.BATTERY_STATS
Set some colors in the app, turned on the information screen under Settings -> Second Screen and rebooted, colors showed up!
Click to expand...
Click to collapse
Turning on the information screen was what I forgot to do (to the left of the on button in the second screen settings, by clicking "..." for those that don't/didn't know like I did) Sorry for the confusion, app works perfect setting the colors. Looking forward to seeing what you guys do in the future!
testing
It is possible to change Celsius to Fahrenheit?
Sent from my LG V20 using XDA Labs
Robert235 said:
It is possible to change Celsius to Fahrenheit?
Click to expand...
Click to collapse
Yeah, but it's not really a priority at the moment.
I FOUND A WAY!
Okay, so for this you need:
Magisk
Xposed for Magisk (possibly also works with normal Xposed)
UnrestrictedGetTasks module found in Xposed Installer
The Apk at the bottom of the first post (Credits to in.abhi9) installed in /system/priv-app (just pop it in any magisk module you have installed in the same folders, so ./system/priv-app/theapk.apk).
a fingerprint gestures app like this that can launch shortcuts or tasker tasks.
using Tasker: In Tasker you need to create two tasks each containing the "run shell" action (they need root). In the first you put "am start in.abhi9.apphistory/in.abhi9.recentswipo.SwipeLeftActivity" and in the second "am start in.abhi9.apphistory/in.abhi9.recentswipo.SwipeRightActivity"
finally link left- and right swipes from the Fingerprint Gestures app to the correct tasker tasks and Bob's your uncle.
using shortcuts: you will need a launcher like nova or action launcher that can launch app activities. In the fingerprint gestures app, select shortcuts, nova/action activities, Recentswipo, and then SwipeLeftActivity and SwipeRightActivity accordingly.
enjoy superior app switching!
Of course you can map any trigger to the tasks you created, they don't have to be fingerprint swipes. I suppose screen swipe gestures can come in handy too!
Original post:
The latest Lenovo Zuk phones have an amazing feature (named U-touch) that let's users swipe their fingerprint scanner to switch apps. This is not just the switch-to-last-app feature we had since Nougat, but it remembers the app-order. Here are two video's to demonstrate what I mean:
https://www.youtube.com/watch?v=wS-LSoraPZg
https://www.youtube.com/watch?v=3sYf4H8yMHw
It seems like the fastest way ever to switch between open apps and as I like to multitask a lot (between more than 2 apps) I'm looking for an app, mod, module, Tasker profile, whatever, to make this happen. It doesn't really matter if it uses the fingerprint scanner (using the Oreo fingerprint gestures api) or if we have to swipe over our navigation bar. Does such a thing exist at all?
Click to expand...
Click to collapse
One thing I really miss about my z2 force was being able to lock the phone with the fingerprint scanner can you use this with tasker to make that happen?
Shaffer678 said:
One thing I really miss about my z2 force was being able to lock the phone with the fingerprint scanner can you use this with tasker to make that happen?
Click to expand...
Click to collapse
Yes you can, tasker can already do that with "system lock" (however that disables the use of the fingerprint reader on the lock screen).
Are you rooted? Then you can simply create a task with a shell command (with root enabled) "input keyevent POWER", that will emulate a power button press. If you like you can then execute that task from the fingerprint gestures app
Works here without Xposed installed
djide said:
Works here without Xposed installed
Click to expand...
Click to collapse
Nice! I tried that as well but the recent apps wouldn't be loaded due to Google removing the ActivityManager.getRecentTasks() command in AOSP, are you perhaps running a custom rom?
I also found out you can just run GMD gestures to go to the previous and next app without xposed (but with root) either with gestures or with the fingerprint swipe mapped to a gmd shortcut
Humpie said:
Nice! I tried that as well but the recent apps wouldn't be loaded due to Google removing the ActivityManager.getRecentTasks() command in AOSP, are you perhaps running a custom rom?
I also found out you can just run GMD gestures to go to the previous and next app without xposed (but with root) either with gestures or with the fingerprint swipe mapped to a gmd shortcut
Click to expand...
Click to collapse
With GMD, would I still need unrestricted get tasks and tasker?
Thanks!
arcticnights said:
With GMD, would I still need unrestricted get tasks and tasker?
Thanks!
Click to expand...
Click to collapse
Nope! Just root apparently
Humpie said:
I also found out you can just run GMD gestures to go to the previous and next app without xposed (but with root) either with gestures or with the fingerprint swipe mapped to a gmd shortcut
Click to expand...
Click to collapse
Can you elaborate a little bit more about how to set this up with GMD and Fingerprint Swipes?
JeromeLeung said:
Can you elaborate a little bit more about how to set this up with GMD and Fingerprint Swipes?
Click to expand...
Click to collapse
If you open the fingerprint gestures app and assign a shortcut to a certain swipe, select the gmd shortcuts from the list, application, next/previous app respectively.
I however still use the xposed version as it can reach the homescreen using swipes (similar to the Zuk) instead of cycling the opened apps and the animation is smoother.
Humpie said:
If you open the fingerprint gestures app and assign a shortcut to a certain swipe, select the gmd shortcuts from the list, application, next/previous app respectively.
I however still use the xposed version as it can reach the homescreen using swipes (similar to the Zuk) instead of cycling the opened apps and the animation is smoother.
Click to expand...
Click to collapse
Those were the exact steps I took, but for some reason after I select "next/previous app" it just returns to the list of shortcuts instead of registering the shortcut with the gesture. However, I'm going to give the xposed version a try after your insight about the animation being smoother. I'm all for smoother animations! :good: Thanks again for your help.
JeromeLeung said:
Those were the exact steps I took, but for some reason after I select "next/previous app" it just returns to the list of shortcuts instead of registering the shortcut with the gesture. However, I'm going to give the xposed version a try after your insight about the animation being smoother. I'm all for smoother animations! :good: Thanks again for your help.
Click to expand...
Click to collapse
Oh that's odd, oh well... You'll probably enjoy Xposed, I haven't used it since Marshmallow due to it lacking behind, so it's fun to be able to use it again (go Gravitybox)! And I don't even notice a performance hit at all (which I was worried about), the only downside is the safety net, but hey, Android Pay isn't available here anyway.
Humpie said:
Oh that's odd, oh well... You'll probably enjoy Xposed, I haven't used it since Marshmallow due to it lacking behind, so it's fun to be able to use it again (go Gravitybox)! And I don't even notice a performance hit at all (which I was worried about), the only downside is the safety net, but hey, Android Pay isn't available here anyway.
Click to expand...
Click to collapse
If you use systemless Xposed for Magisk you can just disable the module and reboot to pass Safety Net. Works for all my banking apps and Android Pay :good:
Thank you for showing this awesome feature!
How exactly do you install it as system app? Is it even necessary? I was successful just installing the apk as normal app and then using Nova launcher.
Tried using the tasker method but the finger gesture app kept crashing even though the Tasker tasks seemed to work when testing inside Tasker.
pokeman said:
Thank you for showing this awesome feature!
How exactly do you install it as system app? Is it even necessary? I was successful just installing the apk as normal app and then using Nova launcher.
Tried using the tasker method but the finger gesture app kept crashing even though the Tasker tasks seemed to work when testing inside Tasker.
Click to expand...
Click to collapse
It's probably crashing because it's isn't a system app yet. The easiest way to make it a system app is using a systemizer module in magisk (I believe it uses terminal emulator when it's installed, it's explained in the module description anyway). Or you could do it the "cheating" way and put the apk in your root directory /magisk/(a module)/system/priv-app/RecentSwipo/RecentSwipo.apk
Installing to priv-app wont work, app wont appear. Installing it to /system/app or simply install the apk work though. Although if it installed as user app, the service might be killed in the background.
GMD Solution wont work, the Fingerprint Swipe app unable to assign the proper shortcut. I think the problem is with the GMD.
otonieru said:
Installing to priv-app wont work, app wont appear. Installing it to /system/app or simply install the apk work though. Although if it installed as user app, the service might be killed in the background.
Click to expand...
Click to collapse
Oh strange, well if that works for you
otonieru said:
GMD Solution wont work, the Fingerprint Swipe app unable to assign the proper shortcut. I think the problem is with the GMD.
Click to expand...
Click to collapse
I see, you're right, I just tried it and it didn't work... I'll see if I can still find a workaround
Works for me... put the apk in root/system/priv-app and changed the permissions to 755
Can't get the shell code to work: getting this when ran in terminal
taimen:/ $ su
/in.abhi9.recentswipo.SwipeRightActivity <
Starting: Intent { act=android.intent.action
MAIN cat=[android.intent.category.LAUNCHER]
mp=in.abhi9.apphistory/in.abhi9.recentswipo.
wipeRightActivity }
Error type 3
Error: Activity class {in.abhi9.apphistory/i
.abhi9.recentswipo.SwipeRightActivity} does
ot exist.
I used systemizer module from Magisk to turn the app to a system apk, installed BusyBox and changed SeLinux to premissive. What am I doing wrong?
djide said:
Can't get the shell code to work: getting this when ran in terminal
taimen:/ $ su
/in.abhi9.recentswipo.SwipeRightActivity <
Starting: Intent { act=android.intent.action
MAIN cat=[android.intent.category.LAUNCHER]
mp=in.abhi9.apphistory/in.abhi9.recentswipo.
wipeRightActivity }
Error type 3
Error: Activity class {in.abhi9.apphistory/i
.abhi9.recentswipo.SwipeRightActivity} does
ot exist.
I used systemizer module from Magisk to turn the app to a system apk, installed BusyBox and changed SeLinux to premissive. What am I doing wrong?
Click to expand...
Click to collapse
Is recentswipo already listed in ypur app drawer ?
Also, no need for the terminal stuff, just use nova or any other app that can get shortcut to activities
otonieru said:
Is recentswipo already listed in ypur app drawer ?
Also, no need for the terminal stuff, just use nova or any other app that can get shortcut to activities
Click to expand...
Click to collapse
Thanks, that was what was missing... Used Magisk to turn it into a system app. Good to go