Hi I looking for a specific illuminated data & charging cable for my AT&T note. I bought a black with blue LED's , but I would like to find a White with blue LED's instead it show more light. Anyone know where to find one?
Thanks
1yachtnutz
Related
So it turns out the i717 White Galaxy note I purchased is having issues with charging (Having to move wire and cautiously have to leave it so it will charge). I've already found a video tutorial here ---> http://www.youtube.com/watch?v=pD9R-YUT69Q <--- I'm concerned that if I buy one it will mess up my phone. I normally wouldn't act like this but because of the video's website it actually says there is a flex cable solely for the white version that is different from the black version of the note. That comes to my next dilemma... ---> http://www.durapowerglobal.com/Sams...ort-Flex-Cable-Replacement-REV-10_p_5083.html <--- It's been saying that they are on back order. Im not sure if anyone else has experienced this issue with the same thing and having the white note and all. Any suggestions? Has anyone tried using a flex cable for the white note that was intended for the black note and if yes had you any problems? Thank you for taking time to read this.
I had that same problem on mine when I bought it. I actually had no idea there were different charger flex boards. This is the one I got;
http://item.mobileweb.ebay.com/viewitem?itemId=120983752234
and it worked on my (white) phone up until now. It has to be replaced again. I think the charger flex board is one of those things that's a weak point on the i717.
hey guys, im new to the site and need some help with the data cable of my transformer prime.
okay so the issue is that the original cable that was supplied with the tablet broke ( from the usb end of the cable no the 40 pin connector).
i bought a seperate usb 3.0 cable to replace that one and after a couple of weeks the cable gave up on me. this time it was the 40 pin connector that was broken.
i have stripped both the original and the new 3.0 wires and i was wondering if i could merge the two together to make one cable.
i have red, orange, yellow, green, white and a bare wire (which im guessing is the ground) on the original cable and black, white, green, red and a bare cable on the usb 3.0 cable. is it possible to solder the cables together and if yes which color goes with which. or do i just need to get a new cable?
thanks,
khan92 said:
hey guys, im new to the site and need some help with the data cable of my transformer prime.
okay so the issue is that the original cable that was supplied with the tablet broke ( from the usb end of the cable no the 40 pin connector).
i bought a seperate usb 3.0 cable to replace that one and after a couple of weeks the cable gave up on me. this time it was the 40 pin connector that was broken.
i have stripped both the original and the new 3.0 wires and i was wondering if i could merge the two together to make one cable.
i have red, orange, yellow, green, white and a bare wire (which im guessing is the ground) on the original cable and black, white, green, red and a bare cable on the usb 3.0 cable. is it possible to solder the cables together and if yes which color goes with which. or do i just need to get a new cable?
thanks,
Click to expand...
Click to collapse
Good luck getting support in this forum.. lol
Its pretty dead.. I would suggest trying the other TF Forums.. like the TF201 and higher.. They still use the same cables and basic chargers..
Youtube in this case is your friend...
This forum is still fairly active IMO, but regardless, this is not the TF201 forum
http://forum.xda-developers.com/transformer-prime
http://www.amazon.com/Extended-Char...d_sim_e_4?ie=UTF8&refRID=0JN64FK4AER92QVV958K
Hey guys,
i just found my old s3 i9300. the problem is that the display is broken, if turned on, it does not even light up the backlight of the lcd. the phone itself turns on, i can use the phone as a usb mass storage and the keys light up when i press the power button.
i searched on the internets for a lcd display but it seems to be expensive and hard to fix. but before i throw it away i thought maybe i can use it to give my TV a nice interface, if i am able to mirror the screen via mhl or something. would that work?
best regards
you can buy an mhl cable for connect your S3 to TV or monitor with HDMI interface...it should work
Hi there,
I am looking for a way to charge my i9100 without using the usb port, as it is broken. I do know some phones have external charging pins hidden under the battery cover - my wife's Nexus S has those. Nonetheless I couldn't find them on my Galaxy S II. Anyone had some experience with this? I do know one can buy and replace the usb port together with the whole bottom circuit board, which would probably fix my problem. But I got the phone for free to use before buying a new one and I did not want to put any money into it
Best Regads
namarath said:
Hi there,
I am looking for a way to charge my i9100 without using the usb port, as it is broken. I do know some phones have external charging pins hidden under the battery cover - my wife's Nexus S has those. Nonetheless I couldn't find them on my Galaxy S II. Anyone had some experience with this? I do know one can buy and replace the usb port together with the whole bottom circuit board, which would probably fix my problem. But I got the phone for free to use before buying a new one and I did not want to put any money into it
Best Regads
Click to expand...
Click to collapse
Hi namarath,
I have the same problem. The usb flex cable I bought to exchange the broken one was broken itself, which is common. As a solution I bought an external battery charger for just 5 Euro on Aliexpress. Works fine since I have two batteries. The indicator light switches from pink to blue when charged. Be warned that this light is bright like disco lights
Cheers
Genmaizen said:
Hi namarath,
I have the same problem. The usb flex cable I bought to exchange the broken one was broken itself, which is common. As a solution I bought an external battery charger for just 5 Euro on Aliexpress. Works fine since I have two batteries. The indicator light switches from pink to blue when charged. Be warned that this light is bright like disco lights
Cheers
Click to expand...
Click to collapse
Buying a broken replacement USB port/board assembly is NOT common......buying the WRONG version of the board IS common....There are 4 different non interchangeable versions.
See this guide that I wrote for explanations.....
http://forum.xda-developers.com/showthread.php?t=2335961
But yes, I agree, an external charger and spare battery is a good option....I have done this for both my S2 and S5......
Sent from my rooted, debloated stocKK kn0x0 SM-G900F
Hi keithross39,
Well, unfortunately in my case everything but loading the battery did work with the new flex cable which indeed had the same version number. So I was one of the few to pick a broken one But thanks for your work in that area!
Cheers
Hei. I was happy owner of chromecast. From one day to another does not work.
Nothing on display. LCD does not reconize signal.
Only red light on device.
Holding button does not change anything.
I try plug pendrive via Y otg/power cable with FlashCast, no reaction. Chromecast does not read any data from pendrive (pendrive has LED light which is blinking during using, in this case no light at all).
Device was not hacked/modded.
Any suggestions?
Dabman said:
Hei. I was happy owner of chromecast. From one day to another does not work.
Nothing on display. LCD does not reconize signal.
Only red light on device.
Holding button does not change anything.
I try plug pendrive via Y otg/power cable with FlashCast, no reaction. Chromecast does not read any data from pendrive (pendrive has LED light which is blinking during using, in this case no light at all).
Device was not hacked/modded.
Any suggestions?
Click to expand...
Click to collapse
Warranty ?