HY guys,
I had used my x10 mini pro as my first phone back than (with cm7, with 2.1.1.a.0.6 firmware with multitouch,jit etc etc), but I haven't been using it a whilesince i got my new phone, so it was just lyed on my shelf so I picked it up cleaned and installed with the original SE-rom (2.1.1.C.0.0) to my carrier it is relaesed for the pc companion in this year! BTW i have used it before just to try out and after that I had multitouch...
SO the problem is since I updated my phone to 2.1.1.C.0.0 firmware it's a crazy **** it won't let me to use multitouch in cm7pro v21/ 2.1.1.a.0.6 firmware back-uped from CWM, no where!!! so guys I'm asking you a question, WHAT THE HACK IS WRONG WITH MY PHONE??? since the 2.1.1.C.0.0 firmware, flashed with pc companion
PLEASE HELP ME!!!
When you updated to 2.1.1.C.0.0 it also updated the kernel to that version and the dt module of MiniCMPro only works with A.0.6 kernel.
Sent from my phone
pfonck said:
When you updated to 2.1.1.C.0.0 it also updated the kernel to that version and the dt module of MiniCMPro only works with A.0.6 kernel.
Sent from my phone
Click to expand...
Click to collapse
The kernel is the same .29 as it was since 2.1.0.a.0.6, but is there a special driver? can you help me with the multi-touch?
Kernels report same version but are different.
Sent from my phone
Related
i am running a miui 2.2 on .49 baseband. if i were to plug my phone into seus will it update to the latet .55 baseband or i have to restore the original se rom onto my phone and then plug it into seus?
thanks in advance
It should update (downgrade...) your phone.
But why not use FlashTool instead?
mattiL said:
It should update your pgone.
Bu why not use FlashTool instead?
Click to expand...
Click to collapse
it'll reinstall the se 2.1 with .55 baseband and .435 firmware?
flashtool breaks sometimes. i had an occasion where i was flashing my dualtouch kernal and my phone was stuck at Se logo. had to repair with seus
Flash tool doesn't break. It could be your USB port (dont use a hub, i had this issue) or a misstep in the procedure. The flash tool can be used to upgrade just the baseband without the firmware, its the only way to do that.
Sent from my X10a using XDA App
If you use SEUS it automatically updates everything to latest release from your carrier. If you wanna run anything custom you should just use the flash tool.
Sent from my X10a using XDA App
I've got no issues on using a powered usb hub for SEUS and flashing the dualtouch kernal when the .435 firmware was not out yet.
so now the firmware doesnt really matter? like for J's 2.3.3 i can run on .24 or .435 firmware but i MUST have .52bb. is that right?
now lets say i want the 2.1 honeycomb rom that requires .55 bb and .435 firmware, i have to flash the .55bb then the .435fw via flashtool?
Depending on the specs of a powered hub you might not have problems but flashtool (dunno about seus) can be finicky if it doesnt have a fast enough connection (mine would hang at about 70 percent flashed, without the hub it was no problem)
Yes the basebands can be changed without changing your base firmware.
Sent from my X10i using XDA App
The custom rom changes the firmware. It says its dependant on that firmware because of the included baseband (which is what it is really dependant on) basebands can now be flashed without the stock firmwares.
Sent from my X10i using XDA App
So now let's say I'm running on a miui which requires. 49 bb. I flash the. 55bb on it, reboot once,and flash the new Rom over it? But since the miui that I have doesn't work on .55 bb won't it not boot? Or go erratic or sth?
Yep, if the firmware, ie MIUI is not compatible with 54 - 55 base band, it will boot loop and or force close .... Clubfreaks modded A version of MIUI that works for the newer Bbands too!! Tweaked it a bit and it works well!!!
Enjoy!
Chris
1. rom install in this process VS Flash ROM 2.1.1.A.0.6 what is best method?
2. in former method, included baseband install process..
U20i 2.1.1.A.0.6 Baseband 015.7z
or
U20i 2.0.2.A.0.24 Baseband 006.7z
What files should I install?
3. non-overclock version occurs lack?
You should get the one with baseband 015 then you can install slade's ROM.
netorino said:
You should get the one with baseband 015 then you can install slade's ROM.
Click to expand...
Click to collapse
OK, thanks.
no answer to question number 1 & 3?
Oh sorry kinda skipped that hehe.
You have been answered here a couple mins ago so you might want to look at that too.
I'll quote here anyway
riesan said:
1. the best method is the flash method because you get all the updated baseband and kernel.
2. Just flash the rom to the recent one 2.1.1.A.0.6 baseband 015 because new rom that slade develop uses new baseband and FW 2.1.1.A.0.6
3. non overclock version just a standard with standard CPU on 600mhz and undervolted and overclock version is a CPU overclocked to 710mhz or upper via Cynogemod/Performance/CPU settings and also undervolted.
hope this will answer your question
Click to expand...
Click to collapse
1. I wouldn't know, I got my 2.1.1.A.0.6 update thru SE.
3. By lack you mean lag? If so I haven't encountered anything like that yet, maybe I haven't pushed my phone to the limit but it's been running really smooth for me on non-overclock version.
netorino said:
Oh sorry kinda skipped that hehe.
You have been answered here a couple mins ago so you might want to look at that too.
I'll quote here anyway
1. I wouldn't know, I got my 2.1.1.A.0.6 update thru SE.
3. By lack you mean lag? If so I haven't encountered anything like that yet, maybe I haven't pushed my phone to the limit but it's been running really smooth for me on non-overclock version.
Click to expand...
Click to collapse
thanks a lot
but, As shown in this link, I have one more question.
In Question No.1, do you know the difference between former method and latter method?
I have a friend with x10 mini pro baseband 006
I already rooted and install xrecovery I do a backup the build its 2.1.1.A.06
Kernel 2.6.29
e10i
The thing its the rom I see its for baseband 015
I'm not sure how update I try seus but I can't enter because enter into recovery.
So I'm wondering how upgrade,i see several post but not sure I see various version and not sure if will fit the phone
I'm not a complete noob,i used have a n1 so sorry if was c covered perhaps I did not find any info thanks for help
.......................................................
Sent from my loved atrix ;D
Check this thread.
http://forum.xda-developers.com/showthread.php?t=1087998
But of course use the specific instructions for the X10 mini on the linked threads.
Thanks a lot I will try later,i can flash any radio? Or? Thanks
.......................................................
Sent from my loved atrix ;D
Hi, my new X10 Up to 2.3 then I met this strange disease, who knows his help only slightly:
- Affter Up to fw 2.3.3 stock, Xperia X10 always crashes and reboots when using GoogleMaps with 3G, whereas before when in FW 2.1 does not have this phenomenon.
- Tried a few RomCook WB, TW ... similar problems also
please people help me!
cunhetkhe said:
Hi, my new X10 Up to 2.3 then I met this strange disease, who knows his help only slightly:
- Affter Up to fw 2.3.3 stock whenever it uses GoogleMaps with 3G were Reboot, whereas before when in FW 2.1 does not have this phenomenon.
- Tried a few RomCook WB, TW ... similar problems also
please people help me!
Click to expand...
Click to collapse
Hi, welcome to XDA developers!
I'll try and help as much as possible...
Which kernel are you on? Stock or some custom kernel?
Thank you, I use Stock Rom, I thing it's Stock kernel. I tried to test many of the original Rom but the situation has not improved.
Another problem is that after many tests, I found only when using GoogleMaps with 3G, the machine I was reboot, if used with wifi is fine. So is 3G is the problem? but I still surf the Web using 3G normally without any problems. Hope your help!
cunhetkhe said:
Another problem is that after many tests, I found only when using GoogleMaps with 3G, the machine I was reboot, if used with wifi is fine. So is 3G is the problem? but I still surf the Web using 3G normally without any problems. Hope your help!
Click to expand...
Click to collapse
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
9Lukas5 said:
- Baseband 2.1.67
- smsBB67 patch
- Kernel upgrade
flashing procedure:
-The baseband and the kernel upgrade must be placed in the firmwares folder from flashtool and the sms patch on to the sdcard.
-After you have flashed the rom and the xrecovery now also flash the sms patch before remove the battery.
-In Flashtool flash first the 2.1.67 Baseband, after flashing finished, remove usb cable and select the kernel upgrade and connect the usb again when flashtool asks.
-After both (bb and kernel upgrade) flashed, you can remove the usb-cable and power on the device with everything working on bb 2.1.67.
Regards,
L[/COLOR]
Click to expand...
Click to collapse
I haven't tried this yet, if it doesn't work let me know.
Prodigy said:
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
I haven't tried this yet, if it doesn't work let me know.
Click to expand...
Click to collapse
Many thanks to you, I will try to follow your instructions and will report results
"smsBB67 patch" installed by Xrecovery ?
cunhetkhe said:
"smsBB67 patch" installed by Xrecovery ?
Click to expand...
Click to collapse
Yep now flash bb67 via flashtool.
After that you will need to flash Kernel UpGrade.
If you need help with flashtool you can ref here:
http://forum.xda-developers.com/showthread.php?t=928343
Sent from my X10i using Tapatalk
I have followed your instructions and now my phone has Baseband67 but it still reboot when I use Gmaps with 3G.
You have no other way to fix this problem? please help me
Hi bro, sorry I'm afraid i got no other method to work... you'll might have to use 2.1 firmware ...
Sorry, can't help you
Anyway, enjoy your stay at xda and hope you find a workaround soon.
Anyway thank you also, hope to have another bro in the forum will find a way to fix this condition.
Prodigy said:
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
I haven't tried this yet, if it doesn't work let me know.
Click to expand...
Click to collapse
My phone is X10a, I've flash the rom 2.3 of X10a and then I flash baseband .67 as your guide and was successful, I have cured this disease. My X10 was running fine. Thank you again. (earlier I just flash the Rom 2.3 of X10i )
Hi everyone.
I've been reading the new nAa's post about nightly MiniCM7, and it say we need the latest 2.1.1.C.0.0 SE firmware.
I'd like to know how to upgrade, because as i know, pc companion does not provide this firmware. Also i read about 3g and other problems after installing 2.1.1.C.0.0.
So, what do you guys know about 2.1.1.C.0.0?
Thanks a lot. I own an X10MP with 2.1.1.A.0.6 firmware.
mortadelax said:
Hi everyone.
I've been reading the new nAa's post about nightly MiniCM7, and it say we need the latest 2.1.1.C.0.0 SE firmware.
I'd like to know how to upgrade, because as i know, pc companion does not provide this firmware. Also i read about 3g and other problems after installing 2.1.1.C.0.0.
So, what do you guys know about 2.1.1.C.0.0?
Thanks a lot. I own an X10MP with 2.1.1.A.0.6 firmware.
Click to expand...
Click to collapse
Plz somebody help. Am I asking something wrong?
mortadelax said:
Plz somebody help. Am I asking something wrong?
Click to expand...
Click to collapse
I'm not sure what problems 2.1.1.c.0.0 has as regards to data/3g networking, but if you want it there are a few roms based on this version that are just modded stock firmwares in the x10minipro dev section.
Try these on your phone, and if they pose no trouble for you, use them if you want to produce your own MiniCM7 build.
This one for example.
Ok..that *clean* rom is based on 2.1.1.C.0.0.
So there's a stock (official or not) 2.1.1.C.0.0 firmware? That's the thing i need to try de nightlys MiniCM ?
Thanks buddy. You allways help me :good:
mortadelax said:
Ok..that *clean* rom is based on 2.1.1.C.0.0.
So there's a stock (official or not) 2.1.1.C.0.0 firmware? That's the thing i need to try de nightlys MiniCM ?
Thanks buddy. You allways help me :good:
Click to expand...
Click to collapse
Yeh, the underlying system is what you need, and that's the correct version so it should work. The guy that made that just removed a lot of useless apps to maximize it for internal and ram space and make it faster, but the base system is still stock firmware.