Hello everybody,
I was just wondering how you set up your DSPManager of Cyanogenmod (Official one).
Referring to headphone:
Dynamic Range Compresson: Enabled / Disabled
-Effect Stength: Slight / Moderate / Extreme
Bass Boost: Enabled / Disabled
-Effect Stength: Slight / Moderate / Extreme
Equalizer: Enabled / Disabled
Rock with a little mod on 1k to 0.5
-Loudness Compensation: Disabled / Weakest / Weaker / Weak / Strong / Stronger / Stroongest
Headset Virtual Room Effect: Enabled / Disabled
-Room Type: Studio / Room / Large Room / Stage
Thanks,
F.
Fandonius said:
Hello everybody,
I was just wondering how you set up your DSPManager of Cyanogenmod (Official one).
Referring to headphone:
Dynamic Range Compresson: Enabled / Disabled
-Effect Stength: Slight / Moderate / Extreme
Bass Boost: Enabled / Disabled
-Effect Stength: Slight / Moderate / Extreme
Equalizer: Enabled / Disabled
Rock with a little mod on 1k to 0.5
-Loudness Compensation: Disabled / Weakest / Weaker / Weak / Strong / Stronger / Stroongest
Headset Virtual Room Effect: Enabled / Disabled
-Room Type: Studio / Room / Large Room / Stage
Thanks,F.
Click to expand...
Click to collapse
dynamic range:disabled
bass boost: disabled
equalizer:Rock (0.5 to 1.1)
Loudness Comprehension: stronger
Virtual Room: Disabled
how bout beats audio mod?
kindroid said:
how bout beats audio mod?
Click to expand...
Click to collapse
I've installed new Cyanogen Official, and I found DSPManager included. It seem'd me nice, why install beats audio?
Fandonius said:
I've installed new Cyanogen Official, and I found DSPManager included. It seem'd me nice, why install beats audio?
Click to expand...
Click to collapse
You can try it though, its great
It's a personal thing... Depends on what type of songs you like I tried everything out there and change it depending upon the song
And get beats audio mod its kickass
------------
May The Force Be With You
Should I uninstall Cyanogen or it is just a zip update? Or apk?
Thanks guys
Here you go:
http://forum.xda-developers.com/showthread.php?t=1525208&highlight=beats
Follow instructions mate
im using stock headphone that comes with galaxy tab 10.1 with Beats Audio script. blast!
firesynth said:
Here you go:
http://forum.xda-developers.com/showthread.php?t=1525208&highlight=beats
Follow instructions mate
Click to expand...
Click to collapse
thx ^^ let's take a ride...
Related
Instantly increase sound of your galaxy mega
Tested this app and working flawlessly
NOTE : INSTALL BEATS AUDIO INSTALLER FIRST
AND DONT REBOOT AFTER INSTALLATION JUST MINIMIZE IT
BEATS AUDIO :
http://forum.xda-developers.com/showthread.php?t=1816719
App Info :
About ViPER's Audio
See here: http://vipersaudio.com/blog/?page_id=11
Software Descriptions :
Version : FX version 2.3.1.5 / XHiFi version 2.1.0.2-1
Codename : (FX version) Beautiful / (XHiFi version) X-
Factor
Compiled date: December 7,2013 / September 4,2013 -
Official Release
Operating environment : Android 2.3 / 4.0 / 4.1 / 4.2 /
4.3 / 4.4
CPU platforms: ARM (ARM11 or higher)
Language : English (US) / Simplified Chinese /
Traditional Chinese / Spanish / Polish / Russia
ViPER4Android FX
FX is the main control panel of ViPER’s Audio with all
popular ViPER’s Audio settings.
ViPER4Android XHiFi
XHiFi has less settings compare to FX. It has superior
audio reconstruction which mainly used for restoring
lossy audio quality
FX Key Features
★ NEW Speaker Optimization ★
First effect for speakers. Try it yourself.
★ Android 4.3 Support ★
ViPER4Android supports Android 2.3 Ginger bread,
4.0 Ice Cream Sandwich and 4.1 upto 4.3 Jelly bean
firmwares.
★ Channel Pan ★
Controls left/right channel output. Its not very useful
unless your headphone is imbalance or faulty one side.
It will be a cure for you.
★ Differential Surround / Haas Effect ★
This is an old feature which ViPER520 had removed
from FX in early days.
But after many users requesting it, ViPER520 bring it
back to FX
More info on Haas Effect: http://www.mixcoach.com/
creating-dep...haas-effect-2/
★ ViPER Fidelity Control ★
★ ViPER Bass ★
With different bass modes, you can have greater bass
experience than before!
★ ViPER Clarity ★
With the latest Clarity mode selection, you can balance
up heavy bass with high clarity audio that you can
never imagine before!
★ Headphone Surround+ (VHS+) ★
With this VHS+, V4A made its way to achieve great
surround technologies for Android.
★ Auditory System Protection (Cure Tech+) ★
With normal audio system, listening for more than
three hours will feel fatigue, dizzy, tinnitus, irritated
and other symptoms.
This is a normal reaction, heavy bass and high volume
could cause permanent damage to the human auditory
system, but other phenomena can restore through
resting.
Viper as a listening experience professional will not
ignore this problem. Therefore put a lot of effort to
study how to make a "Healing" sound technology, just
a small success. But thinking on how to let users
experience it.
★ Convolver ★
When an Impulse Response Sample(IRS) is loaded,
V4A will process the sound to show the same
characteristics of the loaded sample. Through
Convolution, samples with effects such as equalizer,
surround, reverberation, tube etc can be loaded.
Download and extract IRS files to <storage>/
ViPER4Android/Kernel/<paste files here>
★ FX Compatible Mode (Only in 4.x) ★
Compatible Mode supports large variety of music
players and the players' own EQ/sound effects
(system-provided/third party)
Therefore, you don't have to select V4A in Sound
Settings > Music Effects, choose anything other than
V4A. Just run V4A app and the effects will be working
with anything else.
1. In option, switch to Compatible Mode. Reboot, done.
2. In Sound Settings > Music Effects, choose other
than V4A.
3. Run V4A app and configure the settings then the
effects will work together with the one you chose in
Sound Settings.
Downloads
Full download list at Official Website:
http://vipersaudio.com/blog/?page_id=48
OFFICIAL THREAD :
http://forum.xda-developers.com/showthread.php?t=2191223
can u give specific intallation?...im get confused with many tutorials
thx before...
egarsurya said:
can u give specific intallation?...im get confused with many tutorials
thx before...
Click to expand...
Click to collapse
this tutorial is for 2.3 - 4.4.x and the other thread is for 5.0.x !
Code:
* ~ DO READ THIS BEFORE ATTEMPTING~
* Iam not here to guarantee any successful TWEAKING/MODDING. nor i am responsible
for bricked devices, dead SD cards,broken eardrums,hearing loss or a broken device. YOU are
choosing to make these modifications, and if you point the finger
at me for messing up your device, I will laugh at you. But I will try
my best to explain all the necessities, so you won't mess up your Device.
*
~END
DO EFS back up just in case your imagination went too far
GUIDE HERE
AFTER tweaking your phone's performance, assuming your contented on its optimum arsenal and battery saving mode, then you go for sounds, everybody wants a crispy loud device at the same time not sounding cheap
I did not make these mods- I am juz sharing them to those who really needs it-for them to save their precious time wandering all over the site
I tried these mods mentioned below on my quatro. All of them works..
===============================================================================================================================================================================================
[MOD][GB/ICS/JB]●►ACID Audio Engine V7.0◄●[Build2805][V9 Soon]|☆☆☆TEAM AC!D☆☆☆
Changelog:
Version 7 ics+
● Rebuild once-again after my old beats audio version 5
● Optimize for every devices
● Should work on all AOSP roms
● Stable
● New library files
● Latest Beats Audio files
● Removed ALSA
● SRS with Surround sound
● WOWHD BASS enabled
● SRS_WOWHD values tweaked (clean reverberation)
● SRS CHSP EQ and Compression tweaked
● New Clearaudio Engine JB from sources
● Clearphase is now effective
● New Downmix lib with tweek 4 crispier sound
● New snd pcm cards for better audio rendering
● New resampling libs and tweaks (48khz)
● Deep and Clear
● Cristal Voice ( JB clearaudio +)
● Louder volume
● Awesome Sound, Powerfull and Deep Bass, Clear Audio, Cristal Voice, Clean Sound without distortion
● Awesome beats
● NEW ACID AUDIO FILE TO CHECK WHETHER THE IMPORTANT TWEEKS ARE LOADED CORRECTLY
● Removed unwanted files
● Optimized configuration files
● More Equalizer Presets
● etc etc............................................... ......
Version 7.0 [GB]
- Added support for Gingerbread (I got many PM regarding this)
- More to come in final release
-noozxoidelabs.noozy player full port(NO FC AND NO BUGS, 100% working)
-Deep bass
-clearaudio
-New sound misc tweaks
-New soundfiles
-Audio tweaks
-Volume fix
-Fully compatible lib files
-X-EQ PROCESSOR
-LOGICSOURROUND ES
-PHYCHOACOUSTIC 2
-OWN EQUALIZER
-DEEP BASS EFFECT
-NO NEED OF EQUALIZER APPS
A Sound mod to bring you overall better sound quality, more precisely
1.do backup
2. Wipe Cache then Dalvik Cache
3.Flash the downloaded file in CWM (First 2802 then Clear Audio)
4.Wipe Cache then dalvik cache
5.reboot your phone
6. Reboot
--If it didnt stick then
Check buildprop and use terminal emulator to fix it (su[enter] mount -o rw,remount /system[enter] aengine)
That's all
MOD
Version 7 for ICS/JB[Stock/AOSP][2802/2805]
DOWNLOAD HERE
Others[Apps tweeks etc]
Clear audio +& Audio FX Widget(Flash it in recovery) DOWNLOAD HERE
Audiofx widget HERE
noozxoidelabs.noozy.84.011 HERE
com.noozxoidelabs.eizo.rewirepro HERE
ORIGINAL THREAD:http://forum.xda-developers.com/showthread.php?t=1923630
CREDITS: Knight47
**Please custom it according to your taste. This let alone is already thumb thumpin
but were not done yet
Download Viper4android ver.2.3.1.5
Download HERE
CREDITS: Zhuhang
have not tried yet on 2.3.2.0 and 2.3.2.2
set to super audio quality/High audio/Battery saving then reboot
If you were able to follow me from the start then be sure you get this right
Viper Settings:
lock effect speaker
set it to [compatible mode] not in normal mode
==============
FX:
<PHONESPEAKER>
1. Master Power: ✔
2. Force Enable V4A: /
3. FIR Equalizer: ✔
(ii) Select Preset: Acoustic
4. Convolver: ✔
(ii) Impulse Response: Studer 1dB w/ noiseReduction updated.irs HERE credits to BSDGeek
5. Cross CHan : 20%
6.Reverberation: /
7. room size: 36m2
8. sound field: 6m
9. Speaker Optimization: /
10: extra loud: /
-im using speaker since my kid nephew still using my headphones
add these:
install like normal apk
Download: tweaked com.motioncoding.beats HERE
(much preferred player)
PORTED S3 stock music player DOWNLOAD HERE
Google player - go to market
AC!D Walkman Player, Clearaudio, Xloud, Clearbass: HERE
ok now set music effects to viper4android..
reboot..
You should have these apps left
-Acid soundmod
-Audio Fx Settings
-Beats.audio.INSTALLER
-clearAUDIO +
-Viper4AndroidFx
-Apollo
-Google music player
-Walkman
{those that are not stated pls delete them coz they will do force close and interrupt some frequencies}
volume set 2clicks starting from zero....
Enjoy..
No need to say it. If this post helped you in anyway, just hit THANKS Button.
-reserved
What is the difference between nornal mode and compatible mode in viper? Can u please explain? Because I am using normal mode..
Sent from my GT-I8552 using Tapatalk
coolkoushik07 said:
What is the difference between nornal mode and compatible mode in viper? Can u please explain? Because I am using normal mode..
Sent from my GT-I8552 using Tapatalk
Click to expand...
Click to collapse
-in normal mode you use viper as your main audio and all of its components, while in compatible mode you retain your phones sound settings and juz using viper as an equalizer.
can this damage the speaker?
And... You tryed it?
zanini007 said:
can this damage the speaker?
And... You tryed it?
Click to expand...
Click to collapse
DAMAGE in what case? pls be specific.. was using it 8/10 volume for almost an hour to drain battery and all went well..
-In this set up, you could actually enhance your home speaker boosting sound using your phone as an EQUALIZER.
-make sure your phone your on interaactive or performance/ noop when doing sound set up...volume quality takes alot on our phones
yes i tried it.
Greetings guys!
Today I'm gonna share my VIPER4ANDROID settings for you guys.You can share yours too here in this thread.First of all,you can download the latest version of viper4android,irs,how to install etc on original thread here http://forum.xda-developers.com/showthread.php?t=2191223.All credits go to @zhuhang and all his friends for making such a beautiful app for boosting our music experience.I'm only share settings for our specific devices.
RULES FOR SHARE YOUR SETTINGS
1.Make sure to state your name/type/model of [email protected] etc.
2.ROM that your running.
3.Music player that you use.
4.What settings you share for whether it's for speaker,earphones etc.
5.An appropriate screenshots/post/ etc of your settings for easy and quick refer by other members.
ENJOY!
These are my settings [earphone & headphone](screenshots below)
1.Stock earphones and music player.
2.Running Megafire V8X rom on my GT-I9205.
3.I will upload settings for speaker later.( No for Bluetooth and usb cause I don't use it).You can share if you want.
Hey dear, please tell me the best setting of hi-resolution music... In viper4android.. I m using Nexus5. I have sony earphones xb70ap. Please suggest me for listening hi-resolution seeting in viper4android... Thanks
Resurrection Remix 4.4.2 N7100 Jetaudio and V-Moda Remix Audio earbuds. Can't find a good setting without the bass going crazy. Thanks
Master Power
V4A-FX is powered on
Convolver
Enable
Impulse Response
Dolby Pro Logic II.IRS
Headphone Surround +
Enable
Level 1
Reverberation
Enable
Room Size
25m2
Sound Field
5m
Damping Factor
0 Percent
Wet Signal
0 Percent
Dry Signal
50 Percent
Fidelity Control
Enable ViPER Bass
Select Bass Frequency
60 Hz
Select Bass Boost
6.0 dB
Enable ViPER Clarity
Select Clarity
3.5 dB
Auditory System Protection
Enable
Select Binaural Level
Moderate
There had some time to refine the settings !
cm 13 remix rom mega 5.8 can i use this app sir..??
I have a Note 3 but I'll share anyway
This is for music only, I shut off V4A for movies, dialogue etc. I'm not sure if the Mega has a processor with NEON or not.
Phone: SM-N900A
Headphones: Shure SE215
Music Player: Poweramp 7.03 alpha (note: must sign up for beta program in Play store)
Playback Gain: OFF
FET Compressor: OFF
DDC: OFF (no, I don't use the SE215 entry; it's terrible)
Spectrum Extension: 1.0
Equalizer: OFF
Convolver: BBE Generic Preset 4
Crossover: 10%
Dynamic System: Common Headphones v2
Dynamic Bass: 24%
ViPER Bass: 78 hz; 8.0 dB
ViPER Clarity: XHiFi; 11.0 dB
CureTech+: OFF
AnalogX: OFF
Master Gain: -10.5 dB
Limit Threshhold: 0 dB
These settings probably won't be any good on low quality earbuds. They need all the extra signal processing crap, but too much of that stuff is a hindrance on high quality IEMs.
If anybody here is interested, I have about 750 .irs files I can post a link for y'all to check them out.
Currently using V4A MK-Mod 2.4.0.1(no TWRP)
Equalizer= Vocal Booster
Convolver= Beats Pro+Beats 40%
VHS+= 2
Dynamic System= High End v2 10%
Viper Bass= Natural 78hz at 8db
Viper Clarity= Ozone+ at 8db
Master Gate= 1.6db and 5:5 and 1.0 limit threshold
Currently using some JVC in ear headphones(don't know the model # atm I picked them up for $20 at Walmart not too long ago.
Oh and I'm using PowerAmp 703 alpha through the beta testing part of the play store.
And I'm using a Razr MAXX HD XT926 w/locked bootloader and 4.4.2 Stock Rom 182.46.15
Earphones
Try soundpeats Q12 wireless earphone to enjoy high quality sound.
Q&A for [Read OP First] Official ViPER4Android Audio Profiles
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Profile sugestions
I'm using shure 215's and listen to mostly metal music. Dose anyone have a good profile for clarity using v4a. Thanks for any help.
tpdeville76 said:
I'm using shure 215's and listen to mostly metal music. Dose anyone have a good profile for clarity using v4a. Thanks for any help.
Click to expand...
Click to collapse
You have some options.
1. Try to make one first.
2. Search the thread for the keyword "shure 215".
3. Just keep trying and/or wait for one to be made.
May I recommend trying some of mine in the OP? Good luck.
Note 3
I want to hear music with deep bass and great sound quality, the headset Galaxy Note 3 under the machine.
Viper4Android FX + Walkman + eXstrembeat 2.0
So I have to install as any?
Sorry for bad english.
---------- Post added at 12:53 PM ---------- Previous post was at 12:47 PM ----------
I want to hear music with deep bass and great sound quality, the headset Galaxy Note 3 under the machine.
Viper4Android FX + Walkman + eXstrembeat 2.0
So I have to install as any?
Sorry for bad english.
Here is my profile for headphone. HULK BASS
what not mentioned left disabled.
MASTER POWER: ✔
PLAYBACK CONTROL GAIN: ✔
(ii) Select Effect Strength : Extreme
(iii) Max Gain: 3x
(iv) Max Output: -1.9 dB
FIREQUALIZER: ✔
(ii) Select Preset: Bass Boost
CONVOLVER: ✔
(ii) Impulse Response: Razor Surround ((Z-Edition)) 7.Stereo+100 Bass.irs
(iii) Cross Chanel: 10%
FIELD SURROUND: ✔
(i) Select Field Surround Strength: Level 3
(ii) Select Mid Image Strength: Extreme
HEADPHONE SURROUND +: ✔
(i) Select Effect Quality: Level 2
FIDELITY CONTROL: ✔
(i) Enable ViPER Bass: ✔
Select Bass Mode: Pure Bass+
Select Bass Frequency: 80 Hz
Select Bass Boost: 14.0 dB
(ii) Enable ViPER Clarity: ✔
Select Clarity Mode: Ozone+
Select Clarity: 13.0 dB
AUDITORY SYSTEM PROTECTION: ✔
(i) Select Binaural Level: Extreme
MASTER GATE (Limiter): ✔
(i) Output Gain: 0.8 dB
(ii) Channel Pan: 0.5:0.5
(iii) Limit Threshold: 0 dB
---------- Post added at 02:14 PM ---------- Previous post was at 02:04 PM ----------
what not mentioned left disabled.
MASTER POWER: ✔
PLAYBACK CONTROL GAIN: ✔
(ii) Select Effect Strength : Extreme
(iii) Max Gain: 3x
(iv) Max Output: -1.9 dB
FIREQUALIZER: ✔
(ii) Select Preset: Bass Boost
CONVOLVER: ✔
(ii) Impulse Response: Razor Surround ((Z-Edition)) 7.Stereo+100 Bass.irs
(iii) Cross Chanel: 10%
FIELD SURROUND: ✔
(i) Select Field Surround Strength: Level 3
(ii) Select Mid Image Strength: Extreme
HEADPHONE SURROUND +: ✔
(i) Select Effect Quality: Level 2
FIDELITY CONTROL: ✔
(i) Enable ViPER Bass: ✔
Select Bass Mode: Pure Bass+
Select Bass Frequency: 80 Hz
Select Bass Boost: 14.0 dB
(ii) Enable ViPER Clarity: ✔
Select Clarity Mode: Ozone+
Select Clarity: 13.0 dB
AUDITORY SYSTEM PROTECTION: ✔
(i) Select Binaural Level: Extreme
MASTER GATE (Limiter): ✔
(i) Output Gain: 0.8 dB
(ii) Channel Pan: 0.5:0.5
(iii) Limit Threshold: 0 dB
tpdeville76 said:
I'm using shure 215's and listen to mostly metal music. Dose anyone have a good profile for clarity using v4a. Thanks for any help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/and...x-profiles-t2945969/post56878387#post56878387
help
i got ath-cks55XiS inear what should profile i use?
mucong123 said:
i got ath-cks55XiS inear what should profile i use?
Click to expand...
Click to collapse
You can start off with my original carnage profile in the op and then tweak it from there if you'd like.
hello
I want to hear music with deep bass and great sound quality.
Device used: Sky pantech Vega a870.
Headphones used: Sony MDR xz310
I'm using Viper4Android FX + Walkman + SoundEnhancement
Thank for any help.
Is there a way to make it so that the vocals dont get quieter when the bass comes in?
Rai8er said:
Is there a way to make it so that the vocals dont get quieter when the bass comes in?
Click to expand...
Click to collapse
You will have to lower the amount of bass.
kingofnice said:
You will have to lower the amount of bass.
Click to expand...
Click to collapse
Alright, thanks
eq setting
Hi I've just installed viper4android from play store....
I've also downloaded a .irs file for my ear-set, but unfortunately I'm not happy with the overall sound until now...
Instead I have found an amazing eq setting for poweramp. Can anyone help me to port this wonderful eq setting in viper4android?
You can find it in this link: goo.gl/E73Mzl
Thank you so much!
Hey... Using Lolliviper (viper4android for and. 5.0) on my htc one with maximus hd... now I need a sound profile for drum and bass thats the sound; ) and is there a irs fir house of Marley exodus on ear headphones? Would be nice if someone could help: )
Sent from my HTC One using XDA Free mobile app
hi
Hello guys... I'm using the House of Marley Exodus- Headphones on my HTC One... I'm listening to Drum and Bass mostly... But I can't find my Headphones or a Audio Profile for Viper... Anyone knows ?
hi guys
i've just installed v4a with the super audio quality driver.
I can't manage to find a new profile for the nexus 5 phone speaker. anyone care to share his profile or settings?
Nexus 5 & Tapatalk.
could Viper4android cause a delay in headset button response?
My phone is a Samsung Galaxy S4 Active SGH-I537. When I receive a call while listening to music, there is often a long delay between pressing the headset button and the call being answered. I know the build.prop settings can slow the audio processing, hence the increase battery drain. Could this be caused by Viper?
chris1379 said:
My phone is a Samsung Galaxy S4 Active SGH-I537. When I receive a call while listening to music, there is often a long delay between pressing the headset button and the call being answered. I know the build.prop settings can slow the audio processing, hence the increase battery drain. Could this be caused by Viper?
Click to expand...
Click to collapse
Uninstall the V4A driver and test.
I am trying it now but the results may be inconclusive. I uninstalled, unrooted and restored build.prop to allow an update. I will have to try it for a while and then reinstall Viper to know which change fixed it. So far it's working OK.
This profile, as reposted below, is pure genius....textured, layered, lush. I measure my music experience by the goosebump factor- and with this preset I get plenty!
The arduous journey of medicocre playback and countless failed attempts to remedy has all been worth it for this!
I am going to also load the other version and see where that takes me. Thanks so much!!
BY ahrion
10th October 2013, 05:44 AM | #154
Enhanced Clarity Pure Bass+ 3.0
For a stunning all-in-one (dance, acoustic, rock, metal, alternative, techno, house, hip hop, etc.) and beautifully clear, pure bass, and quality audio experience used with: Headphones/Earpiece/Auxillary
FX:
1. Master Power:
2. Playback Gain Control: ✘
3. FIREqualizer:
-Select Preset: Custom
–[-2.5] [+2.0] [+6.0] [+3.0] [+0.0] [+0.0] [+0.0] [+3.5] [+1.5] [-3.5]
4. Convolver:
-Impulse Response: Dolby Pro Logic II.irs
-Cross Channel: 0
5. Field Surround: ✘
6. Differential Surround: ✘
7. Headphone Surround +: ✘
8. Reverberation: ✘
9. Dynamic System: ✘
10. Fidelity Control:
-Enable ViPER Bass:
–Select Bass Mode: Pure Bass+
–Select Bass Frequency: 80 Hz
–Select Bass Boost: 10.0 dB
-Enable ViPER Clarity:
–Select Clarity Mode: OZone+
–Select Clarity: 12.0 dB
11. Auditory System Protection (Cure Tech+):
-Select Binaural Level: Extreme
12. Master Gate (Limiter)
-Output Gain: 2.9 dB
-Channel Pan: 0.5 : 0.5 dB
-Limit Threshold: -1.0 dB
XHiFi:
1. Master Power:
2. Playback Gain Control: ✘
3. FIREqualizer: ✘
4. Audio Reconstruct:
-Hi Clarity: 70
-Lo Contour: 50
5. Master Gate (Limiter): ✘
So I'm sharing with you what I have on my device after hours of searching around and experimenting. I personally like a nice Bass but also clarity in the artists' voice and instruments and these settings bring out the best in both. Thanks to @pavaosk for his thread on the mi8 lite thread (his settings give a lot of noise but I've tweaked it to work best with our device).
Earphones: TFZ Balance 1 IEM
Magisk: 19.3 stable
Viper4android: FX Legacy v4.3 (2.5.0.5)
Files: attached
Steps:
Flash the v4a magisk module through Magisk Manager and follow module instructions, reboot, and open the v4a app.
Use the following settings under the HEADSET tab:
Master power: ON
Playback gain control: OFF
FET compressor: OFF
ViPER-DDC: OFF
Spectrum Extension: OFF
FIREqualizer: ON
Preset: Acoustic
Convolver: ON - important!
Impulse Response: SUPERIOR
(Unzip the attached and place the file 'Superior Bass.irs.wav' into Viper4Android/Kernel using file explorer)
Cross Channel: 16% (if you increase this more than 16% you will lose dual channel playback)
Field Surround: ON
Field surround strength: slight
Mid image strength: Level 5
Differential sound: OFF
Headphone surround +: ON
Level: 1
Reverberation: OFF
Dynamic System: ON
Listening Device: High-end headphone v2
Dynamic Bass: 24%
Tube sound simulator: OFF
Viper Bass: ON
Bass mode: Natural bass
Bass Frequency: 60 Hz
Bass Boost: 6.0 to 10.0 dB
Viper Clarity: ON
Clarity mode: XHIFI
Clarity: 10.0 dB
Master gate:
Channel pan: 0
Output gain: -6.0 dB
Limit threshold: 0 dB
And BOOM! Feel the difference..
Let me know what your settings are if if this helped give you a better listening experience. Tweak these a little to suit your ears and earphone hardware. All credits to the devs and I'm only sharing my settings here.
Feel free to share your own settings in this thread!
Credits :
- @zhuhang (Official Thread)
- @pavaosk (mi8 Thread)
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt
- @ahrion
There are no best settings when it comes to earphone and headphone experience. Every device has its own characteristics and needs to be configured accordingly. Also, everybody has their own taste.
Thanks anyways, I'll definitely give a shot.
Best settings ?! ROFL ???? wake up kid ?