the arrows in the tool bar keep asking to register for software update, but i get "processing failed" every time i try and do it
anyone else see this?
wesg79 said:
the arrows in the tool bar keep asking to register for software update, but i get "processing failed" every time i try and do it
anyone else see this?
Click to expand...
Click to collapse
Is your Galaxy S 2 on a Custom ROM or such?
If so this is your issue, most phones cannot update if on Custom ROM.
You might have yo go back to Stock ROM
Sent from P920G 2.3.5
wesg79 said:
the arrows in the tool bar keep asking to register for software update, but i get "processing failed" every time i try and do it
anyone else see this?
Click to expand...
Click to collapse
Use Titanium Backup to uninstall it.
Sent from my GT-I9100
its the official 4.0.3 nothing custom
wesg79 said:
the arrows in the tool bar keep asking to register for software update, but i get "processing failed" every time i try and do it
anyone else see this?
Click to expand...
Click to collapse
Choose United Kingdom as the country and it will go away and also turn on your WiFi.
didnt seem to change anything
not a big deal just kind of annoying it keeps asking to register for software updates but it fails
Faryaab said:
Choose United Kingdom as the country and it will go away and also turn on your WiFi.
Click to expand...
Click to collapse
hi
i have bell i9100m. i updated it with ics but this annoying option not going i am in india now. i tried canada, uk, nordic countries. but nothing. my csc is stil ti BMC(canada.) pl suggest how to cope
Go to applications, all, and disable software update. It will go away then.
Sent from my GT-I9100 using xda premium
greyed out
how to ENABLE software update?
xZeDgEx said:
Go to applications, all, and disable software update. It will go away then.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
hey, did just that when I still had the leaked samsung firmware on, but now I want to ENABLE software update again - any clues?! thanks!
(my galaxy says software update is running under applications-->running, but there's nothing happening when i click on software update under about...?)
Bugs
@wesg79, I noticed you are running on the Bell network. So may I ask, are you running the I-9100M? I'm just curious, because I am and updated my device using the Swedish version of ICS (build:LPQ) and there do seem to be a few bugs. Just wondering if you have experienced them for yourself? I seem to be dropping down to 3G every once in a while and have never had less than HSPA+ with the stock rom. My "Beautiful Widgets" clock widget also seems to not correctly display the time every once in a while, but perhaps they haven't updated for use on ICS yet.
I was having issues with the "processing failed" for the software update, but thanks to this thread it has been resolved.
I'm also curious if someone else can answer the following for me -- once the official Bell version is released for the I-9100M, is it possible to "update" to it using Odin, or would that not only wipe everything on my device. I believe I would also need to re-root my phone, right?
Sorry for all the questions! Thanks in advance.
Related
I've been attempting to get the official 2.2 update however every time i go to the check new in the system update i get the message of server unavailable!!
Originaly my fascinate was rooted and flashed to 2.2 froyo leak , and when I heard that the official software was released I used oden install it to the official dj09 2.1 update 1 , now my phone is unrooted and unable to receive the update, would anyone know how can I get official 2.2?
Sent from my SCH-I500 using XDA App
Are you attempting to connect via wifi? I find I can only get official updates using Verizon's network.
I've tried with and without wifi with no success... any other suggestions?
Sent from my SCH-I500 using XDA App
forum.xda-developers.com/showthread.php?t=1044474
Sent from my SCH-I500 using XDA Premium App
I believe I would have to turn wi-fi off to initiate OTA updates on my DX. For kicks I would also toggle the other devices off and on prior to initializing the update. Bluetooth, gps.
I was running EB01 so I odin'd back to DI01 and DL09 but I got "server unavailable" messages when I would check for OTA updates. I've scoured the internet far and wide for a solution but I've had no luck. Can someone please chime in? I don't get why I would have this issue having odin'd back to stock and it is frustrating.
Im on that same boat I haven't found a solution, I read an old thread on a similar problem but when update 1 was releases that said that certain models can't get that update. .. I think MAYBE because we own these models?
Sent from my SCH-I500 using XDA App
abel_1one said:
Im on that same boat I haven't found a solution, I read an old thread on a similar problem but when update 1 was releases that said that certain models can't get that update. .. I think MAYBE because we own these models?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I'm not sure what you mean by certain models. I can tell you for sure that when I was running the stock eclair build on my Fascinate a few months ago I was able to check for and install OTA updates. I've literally tried almost everything and still get the SERVER UNAVAILABLE message and can't find any help on this on any forums. If you find a solution please do post back here and I will do the same. For now I just ODIN'd the ED01 zip here.
No one else gets a SERVER UNAVAILABLE when checking for OTA updates? I really suspect even though I ODIN'd the stock tarballs something must not be stock for the OTA updates to fail. Anyone, please??
I guess we need to wait for an Odin 2.2 file
abel_1one said:
I guess we need to wait for an Odin 2.2 file
Click to expand...
Click to collapse
You can Odin 2.1 and then flash the ED01 update.zip. That's what I ended up doing since no one responds to these server unavailable issues.
Take a look at this thread
http://forum.xda-developers.com/showthread.php?t=1045753
It is not your exact problem but it does deal with a server problem.
If you can do either option it is worth a try.
MSHancock said:
Take a look at this thread
http://forum.xda-developers.com/showthread.php?t=1045753
It is not your exact problem but it does deal with a server problem.
If you can do either option it is worth a try.
Click to expand...
Click to collapse
I'll check it out, appreciate the help!
phonefiend said:
I'll check it out, appreciate the help!
Click to expand...
Click to collapse
Let me know if it works for you.
MSHancock said:
Let me know if it works for you.
Click to expand...
Click to collapse
What do you know, it works!!! Thanks a lot man, I would never have looked in thread you pointed me to unless you directed me there.
phonefiend said:
What do you know, it works!!! Thanks a lot man, I would never have looked in thread you pointed me to unless you directed me there.
Click to expand...
Click to collapse
I'm glad that worked. I have to do the wifes now. Since she got the update the same thing is going on with her phone.
Thanks to 'cascader' I have used a program to extract the Stock ROM for our Three UK Galaxy Aces. Thanks again 'cascader'!
The zip file contains:
Cooper_v1.0.ops - Partition table etc. for the Ace ONLY
SS5570_Odin_Multi_Downloader_v4.38.exe - Odin 4.38 - To flash the firmware
S5830XWKT5_S5830H3GKT3_S5830NEKT2_HOME.tar.md5 - The firmware
SS_DL.dll - This file is used ONLY by Kies so is un-needed
This is a ONEPACKAGE file meaning you only need the cooper.ops file and the firmware to flash. If you do not know what you are doing - http://lmgtfy.com/?q=galaxy+ace+odin+onepackage+flash or http://yagyagaire.blogspot.com/2012/01/how-to-flash-official-stock-firmwares.html
Download link:
http://www.4shared.com/zip/TENhIZUN/GT-S5830_H3G_1_20111223114803.html?
I accept no responsibility for bricked phones. Thanks!
Jamie.
will i need to convert filesystem back from ext 4 or will flashing do this?
my phone was on O2 but after failed attempts at finding the firmware for it, i just stuck an unbranded stock from asia on there...works wonders
It has to be flashed by ODIN @PJ147 Use the included files for ODIN and the instructions from either link
@King Kaze - I was using UK XEU but it was only 2.3.3, This is 2.3.6 and includes Three's network tweaks which makes my 2G roaming a bit better, but completely useless still. I have to wait 2 minutes for 0.facebook.com to load on Opera! If I use Opera on any other phone on 2G m.facebook.com loads quickly. I'm thinking it's Three restricting how fast things can download/tx-rx on 2G, Their websites load alright in seconds... I asked them about this and they denied that they restrict speeds on 2G which makes me laugh.
0.facebook should load faster than all the other facebook sites because it barely has anything
Yeah, It should but Three restrict my 2G speed so it loads really slowly :L
Sent from my WT19i using XDA App
So Will This put My Ace Back To Stock 3uk Rom?
Installed Thank You
Can This Firmware Be Rooted?
Jaycs06 said:
So Will This put My Ace Back To Stock 3uk Rom?
Installed Thank You
Can This Firmware Be Rooted?
Click to expand...
Click to collapse
Yup I rooted it with the same rooting file i used for stock 2.3.3
Ok Cheers Rooted Quick Question Where Is The 3 Mobile Bootanimation Kept I Cant Find the Bootanimation Zip ? I Want To Save It And Use On Custom Roms I Instal
Thank you for posting this firmware, really helped me out.
Jaycs06 said:
Ok Cheers Rooted Quick Question Where Is The 3 Mobile Bootanimation Kept I Cant Find the Bootanimation Zip ? I Want To Save It And Use On Custom Roms I Instal
Click to expand...
Click to collapse
It should be /data/bootanimation.zip or something
Is this stock rom rooted? And if so, how do you go about unrooting it?
is better than DDKQ8?
@Swiftkilla - I don't know sorry, I regrettably got rid of the phone after I posted this so I didn't check
@kevo02 I don't recommend it for you. I see you're from Costa Rica and on 'ICE' - This rom is made by Three UK so I only recommend it on Three's phones. Sorry!
Note: I won't be checking this thread much, I don't really come on XDA and I sold my Galaxy Ace back in February I will still help though if you need anything
HI I tried doing everything like you said. It wont register on 3 network and when u dial it says mobile network unavailable, any advice would be good
King Kaze said:
my phone was on O2 but after failed attempts at finding the firmware for it, i just stuck an unbranded stock from asia on there...works wonders
Click to expand...
Click to collapse
Are you able to tell me which firmware you used? I'm like you and cannot seem to find any o2 firmwares anywhere on the internet, even though they are listed on their own website!
Is your IMEI still present? *#06# from dialer, should be 15/16 digit number
Sent from my Nexus 7 using XDA Premium HD app
dabby91 said:
Are you able to tell me which firmware you used? I'm like you and cannot seem to find any o2 firmwares anywhere on the internet, even though they are listed on their own website!
Click to expand...
Click to collapse
I would just use a generic stock firmware if I were you because its really hard to find them haha
Sent from my Nexus 7 using XDA Premium HD app
I know this thread is a little dusty, but the contents still apply . When I go to start the flashing in odin, it comes up saying "Please connect phones!!".
I have the latest Sammy USB drivers at hand and I'll try it again once installed, but in the mean time, have anybody else faced a similar issue?
I'm coming from this ROM
Thanks in advance
djdanster said:
I know this thread is a little dusty, but the contents still apply . When I go to start the flashing in odin, it comes up saying "Please connect phones!!".
I have the latest Sammy USB drivers at hand and I'll try it again once installed, but in the mean time, have anybody else faced a similar issue?
I'm coming from this ROM
Thanks in advance
Click to expand...
Click to collapse
bump!
I recently purchased a new HTC Evo View 4G from an internet retailer. Everything works pretty well, including CDMA 3G Internet from Ukrainian provider Intertelecom, except that I cannot update firmware to Honeycomb.
When I try an option from menu "Firmware Update", I receive the following message "The firmware update could not be completed. Please try again later. If the problem persists, you may need to contact Customer Service. Error code: 1233.
I suppose, that my device was rooted, but I don't know, how to check it and whether there are other ways to update firmware.
Can somebody help my?
if you want to use the gps at all, don't update.
Same thing happened to me. I looked in the "Settings" and found out my Flyer had been rooted and a custom rom installed. The vendor apparently didn't know. I requested and received a new Flyer. Installed fine on the new Flyer.
Most likely my firmware is original. There are plenty of HTC apps, which successfully update, also sprint apps and so on. I can update just everything on this tablet, but firmware.
Apps and such don't matter, it could just be a custom/stock ROM. Do you have Superuser in your App Drawer? What does your Settings->About page say?
Haha . If you want honeycomb you don't click firmware update you click HTC software update !
I get the same message on completely stock. I think firmware update has a tie in with sprint services. I use it as wifi only.
MandaNick said:
Apps and such don't matter, it could just be a custom/stock ROM. Do you have Superuser in your App Drawer? What does your Settings->About page say?
Click to expand...
Click to collapse
I agree, all my apps were stock, but "settings" told the story. I was rooted and a custom rom was installed. This was a Bestbuy Flyer, so someone returned it and
vendor sold as new.
j510 said:
Haha . If you want honeycomb you don't click firmware update you click HTC software update !
I get the same message on completely stock. I think firmware update has a tie in with sprint services. I use it as wifi only.
Click to expand...
Click to collapse
Thank you! It does work!
can anyone tell me what the latest firmware is for a uk gs3 on orange.
How can i check what i have..i cant seem to find an option to 'check for update' like i had on my htc?
do i have to download and install samsung kies to do updates?
really hoping there is something out to solve some of the freezing and other issues i am having.
thanks
Install kies
Connect ur phone to pc
Let it check for updates
If there is a new update it will let u know
Press thanks if i helped GT-I9100 using Tapatalk 2
It should have the option in Settings/About device/Software update, but should use Kies anyway, and latest UK version is 4.0.4
Michael_P said:
It should have the option in Settings/About device/Software update, but should use Kies anyway, and latest UK version is 4.0.4
Click to expand...
Click to collapse
dose not have the option there although under 'about device' it says android version 4.04
build imm76d.19300bvale4
Hardly any updates on the servers yet .
Use CHECKFUS .
jje
JJEgan said:
Hardly any updates on the servers yet .
Use CHECKFUS .
jje
Click to expand...
Click to collapse
Evening John, what do you think of your new tool?
www.samfirmware.com
Sent from my GT-I9300T using xda premium
when i connect to kies it says i have the lateset firmware
phone is really buggy and needs sorting asap. Poor effort from samsung i feel...i personally think its a quad core thing as i had similar issues with my htc one x and got rid of it in a few days. My htc ones s however is the quickest and most sold performing handset ive ever had.
hpsauce37 said:
when i connect to kies it says i have the lateset firmware
phone is really buggy and needs sorting asap. Poor effort from samsung i feel...i personally think its a quad core thing as i had similar issues with my htc one x and got rid of it in a few days. My htc ones s however is the quickest and most sold performing handset ive ever had.
Click to expand...
Click to collapse
As previously suggested, try other firmware. Forget Kies, its crap and only check for updates for your specific firmware, not elsewhere.
Try the link above i posted or http://samsung-updates.com/device/?id=GT-I9300here for newer releases.
Just follow the guide by Intratech (he also has some official firmware) for flashing with Odin. Could not be simpler. Just backup anything to PC before hand, and then follow instructions exactly.
http://forum.xda-developers.com/showthread.php?t=1671969
You're welcome
Sent from my GT-I9100 using xda premium
There's a widget called "software updates" that comes with the phone
Sent from my GT-I9300 using XDA
UpInTheAir said:
As previously suggested, try other firmware. Forget Kies, its crap and only check for updates for your specific firmware, not elsewhere.
Try the link above i posted or http://samsung-updates.com/device/?id=GT-I9300here for newer releases.
Just follow the guide by Intratech (he also has some official firmware) for flashing with Odin. Could not be simpler. Just backup anything to PC before hand, and then follow instructions exactly.
http://forum.xda-developers.com/showthread.php?t=1671969
You're welcome
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
really appreciate your help with this but just have a couple more questions
i assume that with odin i can flash any of the firmwares and it dosent matter that my phone is locked to orange (well i believe it is). The phone itself has no orange branding or apps installed.
The other thing i am not sure about is which firmware i should use for a uk handset on orange. If i use a generic firmware will that cause problems with the radio's etc?
The other thing is how do i know what the latest is...i mean i might already have it on my device....it says i have 4.04 on it but are there various versions of this?
Sorry if it seems im being lazy about this but just want to be sure i am using the right one.
thanks again for your help
hpsauce37 said:
really appreciate your help with this but just have a couple more questions
i assume that with odin i can flash any of the firmwares and it dosent matter that my phone is locked to orange (well i believe it is). The phone itself has no orange branding or apps installed.
The other thing i am not sure about is which firmware i should use for a uk handset on orange. If i use a generic firmware will that cause problems with the radio's etc?
The other thing is how do i know what the latest is...i mean i might already have it on my device....it says i have 4.04 on it but are there various versions of this?
Sorry if it seems im being lazy about this but just want to be sure i am using the right one.
thanks again for your help
Click to expand...
Click to collapse
I believe so, should be same as SGS2. Phone lock should be "sim" lock not locked bootloader.
You can flash the modem or kernel as individual packages if need be.
In phone dialer, *#1234#
Ie. Firmware ending in LE7 is older than LE8
Don't forget to backup anything important to PC first. Best to factory reset first in recovery and then immediately boot into download mode to flash. Follow Intratech guide exactly and shouldn't be a problem.
Just make sure you flash any full package as .tar.md5 file. Zip won't work with Odin.
For thanks if you feel like it
Sent from my GT-I9300T using xda premium
I just got a new phone, my mom bought it for me with the money we had saved and she hasn't even paid it whole yet.
I rooted it fine, but then I tried flashing CM10 on it, everything went smoothly but then it got stuck on the CM startup/splash screen or whatever it's called... when I turn it off it automatically reboots and the same thing happens.
it was locked to a carrier, that was probably what screwed it up... I don't know what to do...
if you need any info, please ask. I might know it.
please help :/
PLUG313 said:
I just got a new phone, my mom bought it for me with the money we had saved and she hasn't even paid it whole yet.
I rooted it fine, but then I tried flashing CM10 on it, everything went smoothly but then it got stuck on the CM startup/splash screen or whatever it's called... when I turn it off it automatically reboots and the same thing happens.
it was locked to a carrier, that was probably what screwed it up... I don't know what to do...
if you need any info, please ask. I might know it.
please help :/
Click to expand...
Click to collapse
Have you definitely Flashed i9300 cm10. Did you factory reset before flashing
Sent from my GT-I9300 using xda premium
Are you sure you have an international GS3?
THANK GOD. I found a stock rom and flashed it and everything wen't back to normal.
and yes, 100% sure it's the 9300, XXBLFB
now there's another problem, it's the stock 4.0.4 rom, and I clicked to update because I want Jelly Bean on it, but it says no updates available? what does that mean? can I flash a 4.1 stock rom over it? and where can I find it, I've been looking with no luck...
PLUG313 said:
THANK GOD. I found a stock rom and flashed it and everything wen't back to normal.
and yes, 100% sure it's the 9300, XXBLFB
now there's another problem, it's the stock 4.0.4 rom, and I clicked to update because I want Jelly Bean on it, but it says no updates available? what does that mean? can I flash a 4.1 stock rom over it? and where can I find it, I've been looking with no luck...
Click to expand...
Click to collapse
Settings, applications, all, google framework services, clear data, then go to updates and hit update Samsung software...it should force the Jellybean update
Sent from my SPH-L710 using xda premium
bimmerman7 said:
Settings, applications, all, google framework services, clear data, then go to updates and hit update Samsung software...it should force the Jellybean update
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
thanks! but still says no software available :/
PLUG313 said:
thanks! but still says no software available :/
Click to expand...
Click to collapse
Worked for me...sorry bro
Sent from my SPH-L710 using Xparent Blue Tapatalk 2
did u ever get the JellyBean update to work? I have the tmo S3 and was able to update via Samsungs kies software. However, in sep I had an ATT Galaxy Note and an international factory unlocked Note around for a bit, and the ATT version was supported in Samsung Kies for the ICS upgrade, but the international was not. I believe ICS had to be flashed in the end. I just thought I'd let u know what happened for me, hope it helps. Good luck
Sent from my SGH-T999 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1646610
can I install any one of those 4.1.1 roms on my branded locked I9300XXBLFB?
do I need to do anything before or just use odin to flash it?