HTC HD2 Stuck on loading... - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hi,
i've booted into bootloader and i've:
PB81100 HX-BC
SPL-2.0.8.000 8G XE
MicroP(LED) 0x05
i cannot flash anything and if i put a rom into SD card it always stuck on "Loading..."
Any suggest?
Thanks

what rom (exact filename please) are you trying to flash? size of sd card? is it a regular hd2 or a tmous?

that's the rom
RUU_Leo_S_HTC_ITA_3.14.408.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
but i've tried soooo many, i suppose to be a regular, european/italy HD2.
Thanks in advance for your support!!

use hspl2 to set spl 1,66,.0000 and try the flash again. 2.08.0000 is a tmous spl and can cause problems with stock flashing.
Or, use hspl4 and set 3.03.hspl and flash from usb instead of sd. If you want to go back to full stock, once the 3.14 rom has flashed, run hspl4 again and choose 3.03.0000. Voila, all stock,.

Ok Samuel. Today i will format a new pc and i'll do as follow:
Install activesync
Install/copy hspl2 package
Connect The phone via USB and wait The pc to recognize it
Launch hspl2 and try your procedure.
IS this All right?
Thanks!!

Ok, tried as above...
hspl2, bar loading forward and backward and nothing happens!
dunno really what to do more....

sorry to hear that. All i can suggest is keep trying (correct) stock rom flashes from sd, get a different sd card, 2gb too if you can, just to test. Also try hspl4 to set 3.03, it could just be 2.08 playing up.

i've tried all HSPL4 options and nothing happens, always bars loading but not flashing.
How can i know which is the correct stock rom?

the correct one is the one that HTC.com lets you download using your phones serial/IMEI number.
Usually you can figure it out from the history of the phone, ,,, if it was received on contract from o2 in germany, the correct stock rom will be an o2 ger rom, (RUU_LEO_O2_DK) , from t mobile UK it would need a t-mo uk rom (RUU_LEO TMO_UK). Bought sim free from carphone warehouse, it uses the generic unbranded roms. (ruu_LEO_HTC_wwe)
(The ruu_filenames i quoted are examples, the format is probably slightly wrong, but you get the idea)

contacted HTC the phone is ITA no brand... i've tried ita roms, no success, if i put on sd with leoimg.nbh always stuck on "loading..."

Related

[Q] Have I killed my HD2?

Apologies for the new thread.
I bought a HD2 off ebay a few months ago and have a had numerious problems using it as a phone, goes from 4 bars to none every couple of mins cuts off mid call, basically doesnt work inside the house. I called HTC support & they took the serial number then told me it was a "demo" phone and unsupported, I went to the website to see if I could download a ROM update but my serial number was not accepted trying to download any of the roms.
It was running 1.66.405.2 ROM
So, using a serial number off here I downloaded the 3 roms off the HTC website and tried to install them everytime getting the "Invalid Vendor ID" error. I then installed HSPL3 then tried to install one of the 3.14 ROMS using the SD card route, it got to about 2% then rebooted with the error "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
Anyting I can try to get this back up? even if its just to give to the kids for playing music / videos!
Is it worth going down the goldcard route?
Regards
Paul
its just possible that you may be stuck, with goldcard the only option.
You made two mistakes.
firstly, using hspl to run a 3.14 rom leads to instability and memory problems. You cant do it that way with 3.14.
secondly, flashing the 3.14 rom from sd card was a double bad move, because 1 - its not for your device, and 2 - the fact that hspl is there lets it skip the warning initially and update the spl to 3.03.0000, which wouldn't have happened if hspl wasn't there.
You now need to find the correct stock rom for your device to downgrade spl 3.03.0000. Normally i would say find a 1.42 or 1.66 rom, (for the correct carrier if rom locked, or for HTC if not)
You didnt say which 3.14 rom you used (noob omission, lose a point ) se we cant yet rule an area out. for example, if it was the wwe htc 3.14, then we know the phone is branded (pretty likely if its a demo)
ALternative to trying every 1.66 rom you can find, is goldcard. That will allow the 3.14 rom of your choice (or indeed any stock rom) to flash no problems, hspl not required.
Yeah you learn by your mistakes!
Think I eventually got sick of the thing cutting off it was about as much use as a brick as it was! & HTC support were about as much help as hammer! Told me it was an old model & I should consider upgrading!
I've tried 1.43, 1.48, 1.66 all off the HTC website, went through all the other carriers as well entering my serial number in with no luck. The ROM i used was
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship this is what was on it before I ran the update.
Os Version - 5.2.21869 (21869.5.0.81)
Manila Version - 2.5.19211619.0
ROM V - 1.66.405.2
Rom Date - 1.11.10
Radio Version - 2.07.51.22.2
Is there anyway to find out who the carrier would be from the serial no?
only by trying to download every rom for every carrier for every region, and theyre not all on teh website,,,,
goldcard would be your best bet.
Is there any way to create a goldcard when you can only get access to the bootloader on the HD2?
The steps outilined in http://forum.xda-developers.com/showthread.php?t=642486
3:Get the SD card's Serial number & Make the Gold Card
--a: Unplug your HD from the PC and Plug it back in select ACTIVESYNC on your LEO
--b: Run PSAS, Calculators/Generators > Generate HTC GoldCard >
--c: Select LEO from the Drop-down box
--dress "Get SD Card Serial from WINCE Device"
--eSAS should see all the drives on your HTC Leo/HD2. Make certain the correct size disk is sellected. For example, I inserted a 512MB SD card so - Beneath the (CID) box you should see something like " Disk Nr.: 04 - Disksize 512 MB"
--f: Now that the correct disk is selected, press "Save Goldcard Image to WINCE SD"
--e: you should see "Done writing SD Card to WINCE Device.
I get the error message "could not open connection, device connected?"
When I turn on the phone all I get is the bootloader menu page!
Resolved
Ok its now sorted,
I bought PSAS and made a goldcard using my old HTC touch. I then installed the 1.66 rom before updating to 3.14
I still have the same phone reception problem, would it be worth trying a different radio to see if that would fix the reception problems?
Thanks for all the help and advice.
Paul
you can't change the radio when running 3.x, because there is no hspl to allow it, sspl can't flash radios and goldcard is for stock roms.
So I'd need to goldcard it back to 1.66 or such then try a few radio roms to see if it will fix the reception problems? Whats the chances a new radio would resolve it?

[Q] I'm stuck in bootloader

Hi,
I have problem with my HTC HD2- it's stuck in bootloader.
I had HSPL and some random polish rom for few months, then decided to flash Artemis one- so I started with installing SPL.
I took ruu_signed.nbh from the new official LEO rom (3.14), and installed it on SD card (i had deleted all files on the card before that). Then I used bootloader, like I always did...
...but now I can't use it, rom doesn't want to work (power on doesn't work). I tried to flash official rom using PDA installer, but I can't connect it with ActiveSync (it's still in bootloader).
Soft and hard resets don't help.
and now bootloaders says:
RUUNBH
PB81100 SS-BC
SPL-3.03.0000 XE
Micro P(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
Serial (or USB, if it's connected to PC)
I know I've probably broken device, I'm a huge noob.
Sorry for my language, english is not my native language, besides that I'm pretty nervous.
I would be extremely grateful if you can help me.
Probably just the wrong version of ROM.. You already have SPL 3.03 on your device. Download the official ROM from HTC website for your country. Then try the SD card method by renaming it to LEOIMG.nbh. Do not forget to format the Micro SD using FAT32 before you copy the nbh file
Thank you! I was trying with WWE version, but apparently only Eastern Europe version can work on my device ;p
All works, thanks for help again!

Cannot remove HSPL

I've been going through threads for some hours now but haven't round a solution, so apologies if it already exists:
I've had a problem with my HD2 freezing. It's been sat in a drawer for a while but I thought I'd try and sort it out.
So first I did task29 and that seemed to go OK.
Next I tried to install the stock Vodafone ROM. It buzzed 7 times when the update started and then stuck at 9%.
Having failed to put a ROM on it I then followed the instructions to remove HSPL. When I start it (VOL down, LEOIMG.nbh on FAT32 formatted SD card inserted) it just goes to the tricolour screen and does not flash/load whatever the nbh file.
I put the phone in the fridge for a while and re-tried the ROM update and that reported success, but it won't boot so it's back in the fridge - I'm getting worried about the battery now.
I see someone else had the same problem removing HSPL but don't know what their solution was - am I missing something?
The phone is currently sat in the fridge because I think the 7 buzzes is a heat (processor) issue so assume it's knackered anyway but I still want to remove HSPL.
[thanks for moving the thread - apologies for putting it in the wrong place to start]
UPDATE: I've now successfully updated the ROM to standard UK Vodafone but still no joy with removing HSPL. I'm using a 2GB SD card FAT32 format file names LEOIMG.nbh but I just get the coloured screen. I'm using the nbh file from the current ROM. Tricolour screen reads:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
And then 'serial' or 'USB' at the bottom changing as I plug it in.
Rather than using SD card stock flash, which contains a radio, (your symptoms are often the fault of the radio) you should try running hspl2, and setting spl 1.66.0000
I've also got personal expwrince of spl 2.x refusing to downgrade to 1.x, even when SD flashing, so radio problems aside i now remove spl/hspl 2.x using hspl2.exe and only then perform the SD flash.
Need a little help here, my mate got a HD2 off ebay, which was stuck at android loading screen. I have no idea what the original owner flashed or didnt flash. I can get into the tri-colour screen ok and it shows 3.03 spl, but refuses to change to usb from serial. How can I get access to flash something onto this that will boot?
samsamuel said:
Rather than using SD card stock flash, which contains a radio, (your symptoms are often the fault of the radio) you should try running hspl2, and setting spl 1.66.0000
I've also got personal expwrince of spl 2.x refusing to downgrade to 1.x, even when SD flashing, so radio problems aside i now remove spl/hspl 2.x using hspl2.exe and only then perform the SD flash.
Click to expand...
Click to collapse
I've not been on the forum for a while since I got the Sensation - can you point me to an hspl2 thread for the why's, wherefore's & how to's?
Thanks.
EDIT: Found it thanks.
To change the SPL you need the device in bootloader mode (tri-colour sreen) than you connect the usb cable between PC and device. in the white section of the bootloader should say USB (if usb sync drivers on the PC are ok). next you need HSPL2.exe, HSPL3.exe or HSPL4.exe from here - http://forum.xda-developers.com/showthread.php?t=611433 . depending on your current SPL/HSPL ver you'll choose one of them.
About the "It's working in the fridge" problem - sorry to hear that. It's pretty much fatal. Check out here - http://forum.xda-developers.com/showthread.php?t=982454
I just got back from repair an HD2 with the same problem, vibrating 7 times, ect., and it cannot be repaired. you need new main board but they are no longer produced, and even if you find one from china it's from 280-250 USD.
I hope it's not the same with you, but...
Well I did the HSPL2.exe thing and that was a piece of cake - HSPL now removed and ROM properly installed.
It still does the vibrate 7 times thing every now and again so it looks like it's going on ebay as junk

Help needed, my HD2 is not well!

OK so here goes,
I was trying to flash my HD2 with the latest ROM for my region using the SD card method as the USB port is not working, it will charge the phone but does not sync with the pc.
All was going well with the flash when all of a sudden the screen went black and since then I've had the following..
When I turn it on I get the triangle with the exclamation mark.
If I try to go into the bootloader I get the RGBW screen with
RUUNBH
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
then I get the white screen with
loading......
almost immediately I then get
00028002
Not allow
and then it goes back to the RGBW screen with the same information as before
Please Help!!!!
News Hound said:
OK so here goes,
I was trying to flash my HD2 with the latest ROM for my region using the SD card method as the USB port is not working, it will charge the phone but does not sync with the pc.
All was going well with the flash when all of a sudden the screen went black and since then I've had the following..
When I turn it on I get the triangle with the exclamation mark.
Click to expand...
Click to collapse
wrong rom for that phone. Needs to match operator too,(assuming its from an operator) and just cos the sim may be unlocked the rom is always locked. Flashing from SD removed hspl so now the rom checks fail.
If I try to go into the bootloader I get the RGBW screen with
RUUNBH
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
then I get the white screen with
loading......
almost immediately I then get
00028002
Not allow
and then it goes back to the RGBW screen with the same information as before
Please Help!!!!
Click to expand...
Click to collapse
Goes to loading cos leoimg is still on SD card. Since you don't have USB, you can now no longer flash hspl, so only sspl, so only winmo cooked roms, and no radio changes. Unlucky.
Is it bricked or is there a way of getting it to work again?
If I can get it back to some form of a functional phone 'er indoors will gladly use it.
Sure, find the right rom, example a German phone from o2 requires the 'o2 de' rom,, an unbranded one (from carphone warehouse for instance) would use the 'HTC wwe" rom.. etc etc.
Once you figure out which rom you need look for a 3.14 version and flash it.
Don't panic if you get what you got this time, that exclamation,just means you got the wrong rom. Try another one
(Edit - I was gonna mention SSPL but just remembered that it needs USB so your option is as above.... correct stock rom)
samsamuel said:
Sure, find the right rom, example a German phone from o2 requires the 'o2 de' rom,, an unbranded one (from carphone warehouse for instance) would use the 'HTC wwe" rom.. etc etc.
Once you figure out which rom you need look for a 3.14 version and flash it.
Don't panic if you get what you got this time, that exclamation,just means you got the wrong rom. Try another one
(Edit - I was gonna mention SSPL but just remembered that it needs USB so your option is as above.... correct stock rom)
Click to expand...
Click to collapse
This solution doesn't appear to work, I've tried every UK version of 3.14 from the HTC website and I've even tried the original 1.66.405.2 (all versions, obviously trying the WWE one first) all to no avail.
News Hound said:
I've even tried the original 1.66.405.2 (all versions, obviously trying the WWE one first) (
Click to expand...
Click to collapse
ALL 1.66 roms are unbranded, the branded 1.66 roms are version 1.72, so you haven't tried any operator branded 1.66 roms.

HD2 has white screen, can't uninstall HSPL

Hi
I have a flashed HD2 with these problems.
In Bootloader it says
PB81100 SS-BC
SPL-208.HSPL 8G XE
0X05​CotullaHSPL 0X50
If I try to install HTC RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe it breaks after 1% it says 270 error
HD2 reboots and again white Screen. When I put off/on battery and press Volume down I see bootloader display.
I tried to flash with sd Card, leoimg.nbh on the sdcard breakes after 10%
it says
00018003
LEOIMG.nbh -FAIL
Radio-Fail
I think I have a bootloader problem. How can I remove SPL-2.08.HSPL 8G XE and set the new orginal SPL ?
here bepe says :
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611433
I made it with HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
but I can't remove HSPL from my bootloader.
How can I set my bootloader back to original htc ?
the topic can be closed
this has solved my problem
http://forum.xda-developers.com/showthread.php?p=24876999#post24876999
I had installd Windows 6.5 everthing was working perfect, then I tried to install Android and clk mod now I get the same in the 1. Posting from me.
I have SPL-3.03 HSPL in the boatloader but I get allways Error 270 I can't uninstall 3.03 HSPL
does anybody have an Idea?
Radio_2.15.50.14.nbh installation fails, but custom rom like energy sucesses. After that again white screen
nobody knows the solution?
You have a stuck radio. Fairly common, with a variety of symptoms. The radio wont let itself be changed which is why custom roms and splashscreens don't have a problem.(radio gets flashed at the start of flashing which is why it always fails around 8-10%) This issue can affect spl to a greater or lesser degree, some people can change spl some can't, some find flashing an older (but correct for that phones cid and region) stock rom, some find chilling the phone allows the flash to take allowing the radio to finally change, some never get anything to flash again.
hi
thank you for your answer. My Bootloader shows
SPL-3.03.HSPL XE
0X05
0X50
if I try to run Task29 via USB Cable, I get Error 270, it breaks sometimes at 16%
reflash 3.03 HSPL with HSPL 4 says it is successfull, but if I try to flash a rom with usb again it shows 270 Error, so my logical deduction is, reflash with HSPL4 does not really flash and it gives wrong answer because others like task28 leo customRUU can't flash over usb cable. HSPL 4 says success but this answer must be fake, after reboot 3.03HSPL remains in the bootloader, I tried to downgrade to 2.08HSPL no chance,
My System is Windows XP SP3 when I connect USB Cable to my HD2 it shows USB in the bootloader but why does it break if I try to flash over USB Cable and give an error 270 ? there must be a connection problem between my laptop and HD2.
I would like to know
Is there any way to flash HSPL4 over microSD card?
Can I see which Radio Rom has been installed ?
its a bit strange
Radio Rom Radio_2.15.50.14 istallation via USB Cable fails after 4%
and via microSD Card ~96-99%
I get
00018003
what can be the reason?
ParmakSokan said:
what can be the reason?
Click to expand...
Click to collapse
as i said,. you have a radio image that isnt allowing itself to be overwritten. My name for it is 'stuck radio' and some people fgind the radio still works fine with, for example, custom roms, it just cant be changed, others find the phone always hangs on grey bootscreen, yet more find taht hspol/spl flashes seem to work but nothing changes, some find chilling it in teh freezer lets a rom flash and suddenly all is well, and yet more find the freezer trick seems to work but doesnt, and yet more try and try and try to sd card flash with their CORRECT stock rom and suddenly without warning teh flash works.
My advcie, Prepare yourself for disappointment, but keep trying,and most importantly READING there are hundreds of threads about this.
mobile radio
ParmakSokan said:
nobody knows the solution?
Click to expand...
Click to collapse
hey gys whats this radio in mobiles... have searched and searched but no ans.....

Categories

Resources