Whenever i try and install xLPQ from cwm or via odin i get a Kernel Panic Upload Mode message. I can not get back to cwm recovery and have to flash a previous cf root with a previous cwm and kernel Any ideas.
i've tried ultimate cleaning script as suggested in the forums and tried flashing XLPQ from internal sd card using cwm. Still goes into kernel panic mode, i can cf root with lph which allows me to reinstall omega 4.0.
You may try to flash again stock service firmware(2.3.x) through Odin and after flash LPQ on it through Odin too.
Sent from my GT-I9100 using xda premium
just tried that same outcome.
I just tried flashing original stock rom again and old cf root lp2 and phone would not boot at all just stayed on opening screen luckily i was able to install omega 4.0 which was on my sd card but none of my back ups work.
Hm...it's very interesting. I have no ideas anymore, but I think how to help you.
Sent from my GT-I9100 using xda premium
i can flash roms with lpb and Lp2 through cwm recovery but any other kernel like siyah or stock xlq causes the kernel panic upload mode message on start up.
Ok Ive just tried to flash the latest omega rom going from 4.0 to 5.0 seems like if i go anywhere near XLPQ the phone boots into Kernal Upload Panic Mode anybody know of the changes made in build XLPQ that could make the phone do this.
Wipe phone install GB stock and start all over install via ODIN .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .or are going round in multiple flashing circles .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
tried going from stock 3 times soon as i get try to flash siyah or XLPQ i get kernal panic mode i can get roms using XLPB and XLPH working ok
Related
Tried rooting S2 then using Odin to update firmware to 2.3.4 but it failed. Now all I get is a message saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again".
Because I wasn't using Kies I haven't got a recovery code.
Is there an idiots guide to getting my phone to work? I'm a bit of a noob and have searched for solutions but can't find any.
Thanks in advance.
I don't think that's bricked. Just pull out the battery for 10 seconds and put it back.
Factory reset via recovery and install a stock rom via Odin.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Flash a kernel with CWM over odin, boot into CWM recovery, copy a custom rom to internal sd card and flash this using CWM
Kernel & instructions:
http://forum.xda-developers.com/showthread.php?p=14283342
[08.08.2011][CF-Root v4.1] KE2/7/8, KF1/2/3/4, KG1/2/3/5/6/7 - su+bb+CWM4
Rom:
chose your own, for example Leomar75 makes a good rom (original android development section)
.... from TI30 Mobile
No its not bricked.i dont see why you shouldnt have a recovery mode.You dont need to root to upgrade either.pull the battery and leave it out a while.when you swith your phone back on boot into download mode and reflash a stable firmware.
Thanks everyone, I panicked. All sorted now.
Hi All,
Eventough I bought my SGS2 about a year ago, I decided to root it recently. I read various threads on this forum, and then decided to root my phone using CF_Root. Since my Kernel was XXKL1, I downloaded the appropriate file and used odin to flash PDA. Everything worked and I was able to successfully root my phone and install root apps like Titanium Backup Pro.
Now, I wanted to install CM7 on my phone, as it is know to be very stable and doesn't have random reboots. However, after I flashed the .zip file using manual Clockworkmod recovery , the phone refused to boot and went into a bootloop. Upon research, I found that CF-Root Kernal will only be able to install the firmwars which are in Samsung format (factoryfs.img, zImage etc) and the CM7 is not in that format.
I now decided to flash a kernel with standard ClockworkMod and downloaded it from Koush's site. After flashing this (Odin, PDA), the phone got stuck in Bootscreen, with the yellow triangle.
So, as of now, I can only use CF-Root Kernel (stock Kernel works too). Is there any way I can install stock CWM on my phone and be able to install CM7?
PS: I also tried flashing back stock rom, install clockworkmod using the wiki at CM7 SGS2 page. The Phone again went into a bootloop. So basically I am not able to install any kernel which has clockworkmod built into it
jithinsarath said:
Hi All,
any way I can install stock CWM on my phone and be able to install CM7?
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery no cwm then .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Click to expand...
Click to collapse
Thanks JJEgan for the reply...
Well, I guess my original post was long, but unclear.
1. My phone is working perfectly.
2. I am able to root using Chainfire's method.
3. I am able to remove the yellow triangle by flashing the stock kernel via odin and then reflashing chainfire's zImage via CWM
4. When I install CM7 via clockwork recovery, the phone bootloops. Even flashing the CF-Root kernel doesn't help. Only option is to restore from backup.
5. When I try to install any kernel with Koush's clockworkmod recovery, the phone restartes after flashing and gets stuck at the yellow triangle screen.
6. I am able to flash odia's insecure kernel without any issues.
I am looking for solutions for points 4 & 5, so that I can install CM7.
JJEgan said:
jithinsarath said:
Hi All,
any way I can install stock CWM on my phone and be able to install CM7?
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery no cwm then .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Logic says read the CM7 thread ask in the thread
http://forum.xda-developers.com/showpost.php?p=21462574&postcount=141
Not a rom i use so no further idea .
jje
jithinsarath said:
Thanks JJEgan for the reply...
Well, I guess my original post was long, but unclear.
1. My phone is working perfectly.
2. I am able to root using Chainfire's method.
3. I am able to remove the yellow triangle by flashing the stock kernel via odin and then reflashing chainfire's zImage via CWM
4. When I install CM7 via clockwork recovery, the phone bootloops. Even flashing the CF-Root kernel doesn't help. Only option is to restore from backup.
5. When I try to install any kernel with Koush's clockworkmod recovery, the phone restartes after flashing and gets stuck at the yellow triangle screen.
6. I am able to flash odia's insecure kernel without any issues.
I am looking for solutions for points 4 & 5, so that I can install CM7.
Hi mate, I've never tried cm7 nor cf-root kernel on my galaxy s2 but once i got into boot loop so i searched in xda forum and i found the answer.now I drive stock rom + siyah kernel which also provide CWM 5 for you.
I think befor doing anything first flash your drive with stock kernel which also removes yellow triangle then do you should be out of boot loops. if didn't work flash the whole stock kernel then go on with flashing cm7.
I guess then you could flash siyah kernel next flash cm7 using CWM. The benefit if using siyah kernel is that it's compatible with either stock or cm7 firmware.
Click to expand...
Click to collapse
@JJEgan: I made sure I read all the posts in the CM7 thread before putting up a thread myself. No clues there. My problem is that I am unable to get the custom recovery working via clockworkmod recovery... and then flash CM7
I also tried doing it the CM7 way, as described in their wiki but faced the same problem..
@mekhonte: Thanks for the suggestion on siyah kernel. I will try that. What about battery life on it?
I know how to come out of the bootloop, and have successfully done that. But, I am still unable to go into CM7.
I had cm7 installed via cf-root. Maybe you didn't wipe data, cache and dalvik csche?
Sent from my GT-I9100 using XDA App
I tried siyah kernel on cm7 and it didn't work, probably because it us not for cm7. Just flash KL1 then related cfroot, then download an install cm7:
1. In cwm clean data, cache and dalvik cache
2. Install cm7 zip TWICE (that is important)
3. Install gaps
4. Clean caches and data one more time
5. Reboot
And don't mess with the kernel. Cm7 comes with its own kernel which is optimised.
Sent from my GT-I9100 using XDA App
golcheck said:
I tried siyah kernel on cm7 and it didn't work, probably because it us not for cm7. Just flash KL1 then related cfroot, then download an install cm7:
1. In cwm clean data, cache and dalvik cache
2. Install cm7 zip TWICE (that is important)
3. Install gaps
4. Clean caches and data one more time
5. Reboot
And don't mess with the kernel. Cm7 comes with its own kernel which is optimised.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
well, I tried all of the above (including twice flashing cm7) except installing GAPPS. Will try that and report back.
jithinsarath said:
@JJEgan: I made sure I read all the posts in the CM7 thread before putting up a thread myself. No clues there. My problem is that I am unable to get the custom recovery working via clockworkmod recovery... and then flash CM7
I also tried doing it the CM7 way, as described in their wiki but faced the same problem..
@mekhonte: Thanks for the suggestion on siyah kernel. I will try that. What about battery life on it?
I know how to come out of the bootloop, and have successfully done that. But, I am still unable to go into CM7.
Click to expand...
Click to collapse
this is the link of the siyah kernel thread http://forum.xda-developers.com/showthread.php?t=1263838
the developer claims the the kernel is as stable as stock kernel which i believe as long as you do not mess around with CPU frequencies and governors or under volting, it is. i think it has improved my battery life some how, auto brightness script has been modified and also you can down-clock your CPU. I think it's worthy to give it a shot.
---------- Post added at 04:27 PM ---------- Previous post was at 04:21 PM ----------
golcheck said:
I tried siyah kernel on cm7 and it didn't work, probably because it us not for cm7. Just flash KL1 then related cfroot, then download an install cm7:
1. In cwm clean data, cache and dalvik cache
2. Install cm7 zip TWICE (that is important)
3. Install gaps
4. Clean caches and data one more time
5. Reboot
And don't mess with the kernel. Cm7 comes with its own kernel which is optimised.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Q: Does this kernel support CM7 or any other AOSP based roms?
A: Yes, but it only support cm7 or miui based roms for now. If you are using another aosp based Rom tell me and I will support it.
original post : http://forum.xda-developers.com/showthread.php?t=1263838
post#2
Originally Posted by jithinsarath
@JJEgan: I made sure I read all the posts in the CM7 thread before putting up a thread myself. No clues there. My problem is that I am unable to get the custom recovery working via clockworkmod recovery... and then flash CM7
I also tried doing it the CM7 way, as described in their wiki but faced the same problem..
My suggestion is as always one you have a broken phone or two you are doing something wrong hence read the guides and double check .
It worked for me last week .
jje
---------- Post added at 01:51 PM ---------- Previous post was at 01:48 PM ----------
Originally Posted by jithinsarath
@JJEgan: I made sure I read all the posts in the CM7 thread before putting up a thread myself. No clues there. My problem is that I am unable to get the custom recovery working via clockworkmod recovery... and then flash CM7
I also tried doing it the CM7 way, as described in their wiki but faced the same problem..
My suggestion is as always one you have a broken phone or two you are doing something wrong hence read the guides and double check .
Install worked for me last week .
jje
Are you able to get into clockworkmod recovery?
Sent from my GT-I9100 using XDA App
Ok here we go followed my instructions then flashed stock rom and rooted cwm .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
This is meant to clear all user multiple errors and start from a clean phone .
Then to CM7 instructions .
http://forum.xda-developers.com/showthread.php?t=1297557
First time flashing CyanogenMod 7 to the Samsung Galaxy S II, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
have to flash the rom twice in a row to get it booting...is plastered all over the CM7 thread so i did .
Going by your post in CM7 thread you do not have CWM custom recovery installed
CWM and root same as my fix post .
Okay so I am stuck on the recovery screen. I have rebooted several times and I have ended up in the same place. I also chose wipe data/factory reset and wipe cache partition. Some one help
ya know, some steps of what you have done before hand will probably help, what rom did you have, what have you done etc etc,
So either you have sticky buttons or your gonna need to re-flash a rom, but as we dont know wether you mean recovery or cwm recovery this post is about as much help as a chocolate fire-guard in all honesty,
If you are on CWM download a connect your phone up via mounts and storage put the rom on your phone and install it via zip,
if your stock by the sounds of it something went bad...... try grabbing a rom from samfirmware and flash it via odin.
usually happens if you format system partition, if you dont have a hardware issue simply flash stock ROM using odin
I already flash stock rom but im still stuck at the android system recovery e3
Download mode and flash a stock rom . Boot it to run and let it set up .
jje
Is Kernel_I9100DXKL3.tar.md5 a stock rom sorry im noob
No its a KERNEL .
jje
Example of stock rom? GT-I9100_DXKL3_original??? sorry i need you help
If you are on CWM download a connect your phone up via mounts and storage put the rom on your phone and install it via zip,
This option is there in CWM but we cant mount it, I tried many times...
So it is always a good idea to keep your running custom ROM zip file on your SDcard undeleted, to flash on the emergency even while you are on the go...
yesturday only my son fingured my phone and got non stop FC...just flashed ROM again but bootloop, flashed again after Factory Reset...worked.
---------- Post added at 02:39 PM ---------- Previous post was at 02:32 PM ----------
min469 said:
Example of stock rom? GT-I9100_DXKL3_original??? sorry i need you help
Click to expand...
Click to collapse
jsut read the complete guide in the link in my signature "All Stock Roms & Guide How to use ODIN"
and download any then see how it looks like....
http://forum.xda-developers.com/showthread.php?t=1075278
i say you read first as you have zero knowledge.
inshort download stock firmware, flash using odin.
Im still stuck on CWM even after stock roming it.
min469 said:
Im still stuck on CWM even after stock roming it.
Click to expand...
Click to collapse
what do you mean by stock roming, and waht did you do?
I flash stock rom on my phone but still stuck on cwm, i not really sure what i did to my phone before the problem
min469 said:
I flash stock rom on my phone but still stuck on cwm, i not really sure what i did to my phone before the problem
Click to expand...
Click to collapse
which CWM???, once you successfully flash a stock rom from ODIN, then you will get only stock recovery...what happens after flashing automatically reboot to Recovery?????
Yup i got the Android system recovery e3 now, now im stuck there
more information you give more you will get help,
we cant help with least information,
Try to flash cwm or siyah in recovery. Then flash some rom and see if that helps
Sent from my GT-I9100 using XDA
I flash cwm and flash some rom but still stuck on the cwm )):
Can u upload a pic of which recovery mode your on? Your best bet is go to samfirmware download a rom for your country or what ever you want put phone in download mode, install kies on your open task manager make sure kies isnt running grab odin and flash the stock rom,
Sent from my GT-I9100 using Tapatalk 2
I am in the same situation, stuck on the CWM Android system recovery screen. My Kernel is fine, I entered it not realizing I couldn't get out because my home button hasn't worked in over a year. I've tried resetting with the power button, and the power button + down key, but it always comes back to this screen. All I need to do is select the "reboot system now" button but without a Home Key I can't select it. Any way around this?
Ok heres what i did.
First On 2.3.6 KL1 i presume. Rooted my phone using CF ROOT
http://forum.xda-developers.com/showthread.php?t=1103399
Then Installed F1 Galaxy Nexus ROM
http://forum.xda-developers.com/showthread.php?t=1601518
Then tried to dual boot (Greedy me!)
The other ROM i thought of was Resurrection ROM..
Then i installed it. Using this guide
http://forum.xda-developers.com/showpost.php?p=24233085&postcount=2
So the next time i installed Siyah 3.2b5 My phone didn't boot after The initial S2 logo.
So I then flashed a new ROM KL8 from Odin
Its working fine.
But am not able to install any other ROM.
Any idea what might be the issue?
Thanks in Advance
arunreturns said:
Ok heres what i did.
First On 2.3.6 KL1 i presume. Rooted my phone using CF ROOT
http://forum.xda-developers.com/showthread.php?t=1103399
Then Installed F1 Galaxy Nexus ROM
http://forum.xda-developers.com/showthread.php?t=1601518
Then tried to dual boot (Greedy me!)
The other ROM i thought of was Resurrection ROM..
Then i installed it. Using this guide
http://forum.xda-developers.com/showpost.php?p=24233085&postcount=2
So the next time i installed Siyah 3.2b5 My phone didn't boot after The initial S2 logo.
So I then flashed a new ROM KL8 from Odin
Its working fine.
But am not able to install any other ROM.
Any idea what might be the issue?
Thanks in Advance
Click to expand...
Click to collapse
the KL8 rom u installed from odin is it a stock firmware if yes then u have lost root privealage hence u have 2 root it once agian using a cf root kernel
then only u can install any other roms
Did Root once again (Sorry For not mentioning)
Sun90 said:
the KL8 rom u installed from odin is it a stock firmware if yes then u have lost root privealage hence u have 2 root it once agian using a cf root kernel
then only u can install any other roms
Click to expand...
Click to collapse
Yeah i did root using CF Root. Hence i got CWM from which i did wipe data, wipe cache and then Installed zip from sdcard. (F1 galaxy nexus from Faryaab) It got installed. Then again stuck at the boot logo. Dont see the boot animation
Try formatting system partition and get the file again, might be corrupt download
Sent from my GT-I9100 using Tapatalk 2
Tried it no go
atifsh said:
Try formatting system partition and get the file again, might be corrupt download
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hi..
I did what you told me to. Still get the same boot logo
Guess my phone is done for R.I.P
Don't think so phone is rip, download the file again, or try some other ROM
If I were you I do this
formatting system, cache, data and after that flash stock GB using Odin.
Sent from my GT-I9100 using Tapatalk 2
What intrigues me is that, If i use KL8 alone (which is flashed via odin) Am able to use the mobile. use it well actually
But if i try to use any other ROM its stuck in the Boot logo
I tried LPQ from Intratech. Even that didnt work.
I thought this could be an issue with the kernel
(But i realised i was able to flash CF Root's kernel and move back to stock kernel so there would be no issue with regards to Kernel.)
Incorrect or Incomplete download wont be an issue i guess as I tried two to three ROMS.
Btw. I used this link
http://www.technetinfo.in/mobile/mobile-software/i9100xxkp8-android-403.html
I followed all the Instructions (Guess may be cause of the PIT file. I'm not sure cause ive seen in posts that we should not lay hands on PIT files)
So someone please help me out.
Will be ever so grateful
atifsh said:
Don't think so phone is rip, download the file again, or try some other ROM
If I were you I do this
formatting system, cache, data and after that flash stock GB using Odin.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
By formating system cache data you mean wipe options in CWM right. That i have done lotsa times. Can kernel failure cause these issues, as once i got Kernel panic mode error??
If you follow a link from another forum why not ask them its their instructions after all .
XDA says total wipe of the phone and start again.
and do not touch a PIT file ever .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery >>>> install CF root if no recovery first .
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Pick your custom rom and follow instructions .
jje
I think the problem was that you tried to dual boot with a 4.0.3 and a 4.0.4 ported ROM.As far as Im aware 4.0.3 is the supported ROM for dual boot with Siyah kernel.I personally wouldnt trust 4.0.4 dual boot yet.Do as posted above and you should be O.k.
Finally Issue solved
JJEgan said:
If you follow a link from another forum why not ask them its their instructions after all .
XDA says total wipe of the phone and start again.
and do not touch a PIT file ever .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery >>>> install CF root if no recovery first .
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Pick your custom rom and follow instructions .
jje
Click to expand...
Click to collapse
cooza said:
I think the problem was that you tried to dual boot with a 4.0.3 and a 4.0.4 ported ROM.As far as Im aware 4.0.3 is the supported ROM for dual boot with Siyah kernel.I personally wouldnt trust 4.0.4 dual boot yet.Do as posted above and you should be O.k.
Click to expand...
Click to collapse
Thank you for your help.
Issue has been solved. Now am able to Install F1 Galaxy Nexus ROM
I'm putting dual booting aside for now. Will stay on CM9 kernel itself
Thanks again for your help
I am using SGS2 i9100 and rooted and CWM installed as follows:
1. PC Odin Flash LPB Firmware (ICS 4.0.3).
2. PC Odin Flash CF Root LPB Kernel.
3. Mobile Odin Flash Stock LPB Kernel to remove Yellow triangle.
4. Mobile Odin Flash CF Kernel again to get CWM Recovery as well as root.
So far everything is OK. I can boot to recovery and installed CheckROM v6. Perfect no problems.
Then decided to try MIUI (ICS) when it was released. After complete wipe, ROM installation completed and on reboot > Kernel Panic Upload Mode. Couldn't boot to recovery Just to Download Mode. Had to follow steps 1 to 4 again to get Phone working with root and recovery. Tried a couple of times with MIUI from different sources like miui.us or miuiandroid.com but same result. So back to CheckRom v6 which works without problem.
With recent better ICS ROMs available, tried to install Omega v1.0. Again Kernel Panic Upload Mode. Followed steps 1 to 4 again. Tried Omega 12.0 used by lot of people. Again Kernel Panic Upload Mode. Tried PC Odin Flash of Siyah Kernel. Got the Siyah screen to show on bootup but this remained a while ... ROM did not boot and then screen turned to Kernel Panic Upload Mode after waiting a couple of minutes.
After again doing steps 1 to 4 I am back on CheckROM v6 which works flawlessly.
Why can I not use any rom which tons of users are using? Is there a hardware peculiarity which is preventing this? Should I try out old or new or ICS bootloaders? I don't want to mess with bootloaders as I hear these can hard brick the device.
Any suggestions?
Thanks.
PS: My Complete Wipe steps are:
1. Remove user data/Factory reset.
2. Clear Cache
3. Clear Dalvik Cache.
4. Optionally Format system partition in mounts and storage.
The reason is obvious ....Why old LPB???? Stay away.....
Start again from the GB rom better 2.3.5 from odin
Root with cf root and flash any rom what you want from CWM...
No need to change bootloader again...the one you get along with the gb rom is enough further for all
OK I have KE8 (Gingerbread ROM 2.3.3 which is latest for my location) downloaded. Will a PC Odin flash of this remove my current troublesome bootloaders? Or should I download another GB Rom 2.3.5 or newer for PC Odin Flash?
PS: I used LPB assuming that an ICS Rom would give me the bootloaders which would not give me headaches from installing custom ROMs from XDA here. If someone could explain to me where my logic went wrong?
ZACQ8 you called LPB old, but wouldn't it be newer than the 2.3.5 GB ROMs?
NeoMustain said:
OK I have KE8 (Gingerbread ROM 2.3.3 which is latest for my location) downloaded. Will a PC Odin flash of this remove my current troublesome bootloaders? Or should I download another GB Rom 2.3.5 or newer for PC Odin Flash?
PS: I used LPB assuming that an ICS Rom would give me the bootloaders which would not give me headaches from installing custom ROMs from XDA here. If someone could explain to me where my logic went wrong?
ZACQ8 you called LPB old, but wouldn't it be newer than the 2.3.5 GB ROMs?
Click to expand...
Click to collapse
you can flash the one which you are having now, but make sure CF-root is available for that to Root and install CWM, for your further flashing of ROMs,
yes that will replace the bootloader, but doesnt matter, it will be ok for all custom roms, (unless some Rom devs insist to replace bootloader first for their Roms)
I told the LPB is the old in the sence, it is old beta release among the ICS versions. Kernel Panic was highly reported while using this version.
Kernel panic Mode is hardly reported when people are coming from GB roms and installing Roms from CWM. that is why I sugested flash a GB rom from ODIN then move to any ROM through CWM.
You can also flash and try latest ICS version from ODIN.
Cool. That's the task for tonight then.
Sent from my GNex on AOKP.
if you are flashing a custom ICS ROM take the LP9 version,
one custom ROM with LP8 version has gaven me once the Kernel Panic
Goodluck
Thanks that worked. Installed Omega 1.0. Downloading Omega 2.1. No kernel panics. So from now the phone shoul dbe trouble fre hopfully.
wen u get prblms instead of keeping on flashing jus stop an ask..
flash stock gb after wipe..
then root properly..
don go for any rcs,beta,alpha root release....
then its a good idea to flash stock ics ...
wen u get a clear pic,u can go for aokp,aosp which will b diff...
bottom line kno some basics instead of jumping far away......cheerz
Looks like I'm in the same situation, I had used odin to flash with I9100_CODE_I9100XXLP2_CL57619_REV02_user_low_ship.tar.md5 back in Jan/Feb and flashed it with CF-Root-SGS2_XX_OXA_LP2-v5.2-CWM5 kernel.
I was then able to flash new ROMS no problem with CWN
Then flashed the other day with the latest Ressurection Remix 2.2 and am getting the dreaded "Kernel Panic...."
So I'm back to the I9100_CODE_I9100XXLP2_CL57619_REV02_user_low_ship ROM.
My plan is to flash it with a 2.3.6 ROM using odin, then apply the CF-Root kernel and from there I'm hoping I can then apply Ressurection Remix ROM.
I'm just a bit unsure of which versions of the ROMS to use, I haven't been able to find a guide to selecting the correct versions for my phone. Any pointers would be greatly appreciated.