Related
Hello,
I've been searching the forums for this but basically I did Gingerbreak/Gingerblur 4.5 from the now zombified post. I have since over looked the update 4.5.91 because I don't want to hard brick the phone, but now it looks as though I'm stuck on Gingerblur.
1) I CANNOT restore to factory settings via the phone (Get stuck in Failed to Boot 2 Starting RSD Mode lock out) no matter what I do.
2) After going into RSD protocol support, It will not recognize my phone at all on RSDLite v5.0 (so can't flash SBF files)
3) If I select Android Recovery it will result in "Failed to Boot 2"
I've been looking at the threads for the latest stuff, but none of them seem to address my issue. Any thoughts on how the heck I get this thing fixed? I'd like ideally to get Android 2.3.4 and the latest and greatest, but don't want to brick the phone. Any help would be greatly appreciated
BTW it works just fine in Gingerblur, but I'd like not to be stuck with that forever...
You are not unlocked. Feel free to flash an sbf as hard brick has to do with unlock and bootloader stuff.
My thoughts would be to just unlock your bootloader. Start with the pudding thread
sent from my Atrix via XDA premium
Well, perhaps I should have gone back to stock image first before doing Pudding.
Soft bricked my phone now. Stuck in Failed to Boot 2 - Starting RSD Mode
I will download the 1.26 from here:
http://forum.xda-developers.com/showthread.php?t=991072
and try to do a restore...I hope I haven't screwed my phone up...
I did the same and flashed it back to stock i used rsdlite 5.5 and used my country specific SBF.
It is back to stock but webtop Isnt working
Actually sorry. To clarify, I'm using this thread instead for the SBF.
http://forum.xda-developers.com/showthread.php?t=1125944
Will see if web top is a concern IF the stock file flashes properly...
Being on anything won't effect an sbf flash. Go ahead and rsd to gingerbread. Or pudding
sent from my Atrix via XDA premium
I got it back to 1.26
One thing people don't mention is if you have an older version of RSD Lite it will NOT recognize the phone with the latest drivers...(and there are a wealth of older RSDLites floating around so to a newer person it's not quite evident which is latest)
It's now on 1.26. I will try the bootloader unlock, pudding, etc later when I feel more comfortable...
So I think I may have screwed myself. I was following this guide for changing the battery icon to 1% increments instead of 10%, went to reboot and now my photon is stuck on the Motorola Dual Core technology screen. I can't get adb to recognize it and its been stuck like this for a good 20 minutes. Any thoughts? Am I screwed?
i had this exact problem 3 nights ago
Download rsdlite 5.3.9 , 5.0 would not support the phone.
download either 198-6 or 198-7 sbf found in the devolpment sections
you can flash it with the rsdlite program by booting to rsd, Vol up + power
make sure you have full battery and it will reboot a couple times on its own at the end i had to do a manual reboot but it told me i needed to. your phone will reactivate on reboot
I've been trying to boot to RSD but it seems stuck on that as well.
EDIT: sorry I guess I didn't realize I need RSDlite to make this work. I found a youtube video with links on how to flash this sbf so hopefully this will work. Downloading the 400+mb sbf file now (slow internet so its gonna be ~40 minutes), but after that I'll try flashing.
Are you unable to boot into rsd mode even after pulling the battery? If so then I'm not sure that you will be able to use the sbf file to go back to stock. It's worth a try either way though I suppose if worst comes to worse you can take it back to sprint.
SNAAAAKEE said:
Are you unable to boot into rsd mode even after pulling the battery? If so then I'm not sure that you will be able to use the sbf file to go back to stock. It's worth a try either way though I suppose if worst comes to worse you can take it back to sprint.
Click to expand...
Click to collapse
I didn't realize I needed RSDLite to push the SBF (I really had no idea what rsd mode was). I managed to find a video from qbking on how to unbrick the Photon and follow that. It worked and I am back to where I was.
Thanks guys and a special thanks to Shabbypenguin who helped talk me through the ordeal a bit on IRC.
So I got my Photon up and running again but...I can't make calls with it. I tried to Update profile/Update PRL just to see what would happen but...they both result in force closes on settings and bringing me back to About Phone. I'm going to try and have Sprint reactivate it but...anyone have any thoughts?
You may want to do a factory data reset before trying to flash the sbf again via rsdlite.
Sent from my MZ601 using XDA App
So I managed to reactivate my phone with Sprint. However now I have no data (unless roaming). I read that I may have to update PRL in About phone to get my data back but...whenever I try to update PRL or profile it force closes.
Anything I can do to fix this? I restored everything I had frozen via titanium backup but perhaps something is missing here that is force closing those two?
Durp. Factory reset solved this issue. Data/phone capabilities restored and customization process, take 2, begins now.
Thanks to those that helped again and hopefully this thread will help someone should they soft brick their photon.
.cruiser said:
You may want to do a factory data reset before trying to flash the sbf again via rsdlite.
Sent from my MZ601 using XDA App
Click to expand...
Click to collapse
I am having similar issues as described in this thread with flashing my Photon (back to stock). I forgot to factory reset before I began the flash process and now I can't get access to the O/S so my question is how do you do a factory reset without going into the Android O/S? Can you do this from fastboot/nvflash/RSD?
So here is my problem, i've wiped my phone so many times to try out every rom/kernel that is posted. The last time i clicked the wrong file to sbf to unlock it and ended up flashing the 235 electrify pudding sbf. (had them all in the same folder...dumbass)
I was able to get rid of the 108 svf error by flashing the boot.img back to the photon ones via fastboot. But still would get the 106 anytime i went to try and flash the sbf.
I've tried in Ubuntu as well as windows 7 to flash it back but nothing has worked since it wants a 235 sbf, and it locked the bootloader.
So I said screw it and tried flashing the electrify 2.3.5 and it loaded up and everything, but i'm stuck on the activation screen and cant get past it. (tires to activate through Verizon)
The 2.3.5 update also removed the bootloader unlock in fast boot even with the id number.
So as easy as it was to flash it right to the electrify sbf, i think once the sprint 2.3.5 sbf is out i should be able to go back. Or once an unlock is found to unlock the bootloader, i can flash the files via fastboot.
I haven't tried messing around with nvflash, since my computer doesn't show the apx when its in that mode.
Update: Was able to bypass activation by booting in to "Boot Android {No BP}" like on the droid x2.
Did you get bootstrap working?
TrojanZulu said:
So here is my problem, i've wiped my phone so many times to try out every rom/kernel that is posted. The last time i clicked the wrong file to sbf to unlock it and ended up flashing the 235 electrify pudding sbf. (had them all in the same folder...dumbass)
I was able to get rid of the 108 svf error by flashing the boot.img back to the photon ones via fastboot. But still would get the 106 anytime i went to try and flash the sbf.
I've tried in Ubuntu as well as windows 7 to flash it back but nothing has worked since it wants a 235 sbf, and it locked the bootloader.
So I said screw it and tried flashing the electrify 2.3.5 and it loaded up and everything, but i'm stuck on the activation screen and cant get past it. (tires to activate through Verizon)
The 2.3.5 update also removed the bootloader unlock in fast boot even with the id number.
So as easy as it was to flash it right to the electrify sbf, i think once the sprint 2.3.5 sbf is out i should be able to go back. Or once an unlock is found to unlock the bootloader, i can flash the files via fastboot.
I haven't tried messing around with nvflash, since my computer doesn't show the apx when its in that mode.
Update: Was able to bypass activation by booting in to "Boot Android {No BP}" like on the droid x2.
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Was able to root it via the photon torpedo, even though it says it fails, it wont install the apks from the root program but it is rooted. Just downloaded them off market and ran root updater.
Was able to get system recovery to install and booted in to it just fine. but it soft bricks after i install the skiny4g zip file, boots up the first time all the way to the US Cellular boot screen then resets, and then loops the Moto Dual Core icon. Tried the "Boot Android {No BP}, and same effect, also tried just wiping cache and then wiping the system and still the same results.
Update: Finely got Skinny4G to boot, took 3 tires and the last time i wiped system 2 times in mounts and storage, shows up as sprint and 2.3.4 and its looking at sprint wireless towers, just trying to activate it now.
Phone activated on sprint, 3g works with out any issue, but the wifi and 4g is dead, now i just have to wait for the electrify unlock or 2.3.5 sbf for sprint.
Hey man, i did the same i flashed 235pudding by mistake, so i tried using the 2.3.5 sbf form electrify and it was going great until !switching phone to bp.. something else" then it stopped on 99% and failed to flash... i waited for 5 minutes just to be sure nothing else happened... it didnt
Then i pulled battery and powered the phone again this time it didnt said the "failed to boot 2" but it didnt started it just sits on the motorola dual core logo.
I pulled battery and powered it trying to go into RSD mode and it just doesnt appears :O
I pulled battery and tried to go into fastboot and doesnt appears either.... i just can turn it on and it sits on moto logo.... any help ideas? Tnks
__________________________________
Edit: I pressed vol up and down while power button and it finally appeared RSD mode.... but battery too low to flash, im gonna charge the battery on an external charger for an hour and report later if RSD lite actually recognizes the device.
_____________________________________
YEAH! After charging battery the process completed, im an international user so its not very imporanto to me Spront or US cellular, the phone boots good without my sim... but as soon as i put it in it says " modem did not power up (0)" so...
Does Anyone knows where to go form here?
Thanks
jokersax11 said:
Did you get bootstrap working?
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Bootstrap install just fine after rooting.
Unbrick yourself
I want to thank Koriotto and everyone else who suggested and or tried the idea of flashing a 2.3.5 rom to save our backs. Now to everyone who has flashed 2.3.5 electrify pudding into their photons:
Disclaimer:
1°This will bootlock your phone until a working pudding for 2.3.5 is released.
2°I have no idea whether this will work with sprint whatsoever since I can't try it out being an "international" user, but at least your phone won't be a total brick. However, my common sense tells me this most likely won't work with Sprint.
3ºThere is a leaked Photon 2.3.5.sbf lurking amid devs, but as far I know it hasn't been released to the public yet. However, in case you do get ahold of it, please provide me the link so that we can try it out and see if we can help the Sprint folks get back to a stock Sprint rom. "Internationals" most likely won't care.
1°Try to get as much juice as you can into your battery.If you can, use someone else's fully loaded battery or charge yours with an universal battery charger (extremely cheap and easy to find). Your phone won't charge while in rsd or fastboot mode.
2°Download and install the appropriate Motorola drivers (x32 or x64 according to your windows flavor)
3°Download Electrify 2.3.5 SBF from here: https://rapidshare.com/#!download|8...19.0-19-release-keys-signed-USC-US.rar|530398
4°Get your device into RSD mode. If your loader says RSD mode, go to step 5. If your loader says nothing or is stuck on "Flashboot", don't worry. Power off your device and then press Volume down + power. The phone will turn on and then off. Then power on normally and you will be on RSD mode. If this doesn't happen the first time you try it, just keep repeating the forementioned process until you get into RSD mode.
5°Flash the SBF file you downloaded with RSD Lite
6°Live to win!
UPDATE: link from Team US Cellular seems to be down. I'll personally upload the file once I get home tonight.
Yeah. Praise US Cellular.
Sprint can I haz 2.3.5 yet?
Thanks so much for unbricking my Photon
Worked like a charm for mine !
Thanks !!!!
firtermish said:
I want to thank Koriotto and everyone else who suggested and or tried the idea of flashing a 2.3.5 rom to save our backs. Now to everyone who has flashed 2.3.5 electrify pudding into their photons:
Disclaimer:
1°This will bootlock your phone until a working pudding for 2.3.5 is released.
2°I have no idea whether this will work with sprint whatsoever since I can't try it out being an "international" user, but at least your phone won't be a total brick. However, my common sense tells me this most likely won't work with Sprint.
1°Try to get as much juice as you can to your battery.If you can, use someone else's fully loaded battery or charge yours with an universal battery charger (extremely cheap and easy to find). Your phone won't charge while in rsd or fastboot mode.
2°Download and install the appropriate Motorola drivers (x32 or x64 according to your windows flavor)
Click to expand...
Click to collapse
the download link doesn't work,would u plz give u a new download link,I need to unbrick my phone.
Thank u.
motiam4 said:
the download link doesn't work,would u plz give u a new download link,I need to unbrick my phone.
Thank u.
Click to expand...
Click to collapse
Original link went went down. Already corrected with one from Team US Cellular. Happy downloading
any updates with unlocking the bootloader for 2.3.5 flashed from sbf?
Hi,
I got a refurb Atrix 4G from AT&T today in the mail to replace my Atrix 4G that had the wifi/bluetooth radio go bad.
Anyways, I attempted to root this new Atrix using the method from here: Atrix Forums root 4G using fastboot.
If you'll note, those instructions omit the 'chmod' command that is found on the instructions here on xda (I downloaded the preinstall.img from xda, since the other link was bad)
After I rooted, (but I have not rebooted) I transferred using USB mass storage everything that was on my old atrix (I told windows to overwrite everything during the copy)
I also used ADB to push Titanium Backup APK.
After that, the phone restarted unexpectedly.
The phone would startup and restart partially through the startup, occassionally I would see the unlock screen for a moment, but usually it would constantly cycle through the Motorola animation then turn off with the green led, then back on.
I figured I messed up the root or something, so I used the Android Recovery to wipe my user data and cache, that didn't work, so I used RSD Lite and pushed the signed ATT 4.5.91 SBF to the phone. I wiped the user data/cache using Android Recovery again after the sbf. Still the same reboot cycle.
Anything else I can try to revive it?
forum.xda-developers.com/showthread.php?t=1421261
This, then SBF again (with the latest RSD lite).
Still broken?
If you aren't unlocked, do so, then maybe try a fruitcake.
PM me with issues.
I got errors from fastboot when it erased system/boot/webstop/preinstall... Trying RSDLite again.. then unlock, will report back.
I erased partitions (with errors see above), rsd'd the OTA locked sbf again, then I unlocked, still rebooting.
I'm thinking it's something hardware-related since the phone will get all the way to the unlock/motoblur setup screen after a battery pull. but will only do the moto-logo after that.
Can I undo the unlock if I need to send it back? It's not clear to me if using RSD lite with the OTA locked signed ATT 4.5.91 sbf will brick it..
tuxp3 said:
Can I undo the unlock if I need to send it back? It's not clear to me if using RSD lite with the OTA locked signed ATT 4.5.91 sbf will brick it..
Click to expand...
Click to collapse
Can't lock it again.
Great, will ATT take it back? I've only had it a few hours and the problems began before I unlocked.
Dunno. I personally haven't read any reports of phones being rejected for warranty because of an unlocked bootloader, but since you only just got it as a replacement for another one, they may scrutinize you more.
Does it seem like it could be a battery issue? I'd like to think it's not, but my old phone had a similiar rebooting problem (although it would reboot well after startup)
Okay, I tried to flash the CM10 Rom on my girlfriend's Electrify that's flashed to cricKet (been flashed for a few months) last night. And it would not flash the ROM. I am rooted, I have the bootloader unlocked. CWM installed also. VERSION: will edit when i can boot
She was running CM7 which was very buggy, random reboot issues. So I decided I was going to flash the CM10 Unofficial mod, I tried to install like four or five times. Ran the "Aroma Prep.zip", then tselected install zip from SD. It kept showing the CM7 loading screen and kept bootlooping forever. So I kept pulling the battery trying to reinstall thinking I did something wrong.
NOW HER BATTERY IS DEAD!
I can't turn on the phone, tomorrow morning I am going to try to SBF the stock rom, but don't I need to be able to boot the phone in order to do so? What can I do, my girlfriend isn't very happy.
Okay, as I was typing this, it randomly booted...I can randomly get it to boot. I think the SBF would work I am scared to move to my Windows PC and try to use RSD Lite because it will take another 20-40 min to boot the f#*^@^* phone.
PLEASE HELP!
Tried RSD Lite, got the phone to enter RSD Recovery Mode....Buuuuuut
Code:
Starting RSD Protocol Support
Battery is Too Low to Flash
Does it charge in Clockwork Mod? Guess I will find out.:silly:
I thought that I broke my phone too my first time flashing CM9, Leave it on the charger overnight, and give it another shot in the morning. When I was flashing the first time I didn't have a charger, and it died on my half way through the third attempt at installing, leaving it just as un responsive as yours
My issue was just a user error, double check your files of your rom, re download them if necessary, and go over the instructions with a fine tooth comb.
It's pretty hard to brick these things, and seeing how you were still able to get to recovery is a good sign that it can be fixed.
Worst case, you'll have to start from scratch trying to flash it back to cricket once you get the rom situated.
Good to hear!
Well good news as of now, I put it on the charger and am not flashing the stock SBF.
I will let you know how that goes. I don't know why I was having trouble with the flash though. I had NO TROUBLE WHAT-SO-EVER when I flashed CM7 about two or three months ago. Really confusing why it wouldn't stick and kept bootlooping at the CM7 screen when it said installation complete.
So I am out of panic mode, and I think/hope my girlfriend will be after the SBF is done flashing!:good:
Got error at 99% in RSD Lite
Failed to boot 1
did battery pull and try to SBF again
Failed to boot 1
PwrReason:USB_cable
Starting Fastboot protocol support
How are you charging? Try an AC adapter and maybe a different cable
If you have failed to boot 1, your only option is to unlock it. Flash unlock.sbf.
peetr_ said:
If you have failed to boot 1, your only option is to unlock it. Flash unlock.sbf.
Click to expand...
Click to collapse
Okay i found the file you were talking about...
derpunlock.sbf and it fixed my error.
Now I can boot! I am about to check and see if she still has Root.
My cricKet PRL stuck, my APN settings are still in the phone, and everything is working. Time to root again
help
saiyaneye said:
Okay i found the file you were talking about...
derpunlock.sbf and it fixed my error.
Now I can boot! I am about to check and see if she still has Root.
My cricKet PRL stuck, my APN settings are still in the phone, and everything is working. Time to root again
Click to expand...
Click to collapse
im stuck too everytime i flash it in rsd says svf:106:1:2 sec_exception: b655,wddc,eb help please