Related
Sorry I'm new so was wondering if anyone could relay or respond. I can't seem to get any wifi tethering to work on Synergy r345.
Same...I was wanting to use the synergy ROM but after I flashed USB tethering was not working and neither was the hotspot it said I was not subscribed.
I am using Steel's ROM for now.
are you guys using cwm 4.0.1.4 recovery
ivan1.ruiz said:
are you guys using cwm 4.0.1.4 recovery
Click to expand...
Click to collapse
using TWRP
using cwm cuz i have no other choice (htc official root) and wifi is borked.
can someone confirm changes to the new Synergy release?... is the 3G/4G notification gone? Also no settings access in the notification dropdown?
Your different things may not work if you are using a 2.3.3 ROM with a device that got the new OTA. Also 2.3.4 ROMs only work with the new kernels or stuff won't work.
Sent from my HTC Hero making C.R.E.A.M.
Did you unlock with the HTC unlock? If so I do not think its allowing to flash a kernel. It appears to flash but it doesn't. Is the rom you're trying to flash a 2.3 rom? If so try flashing a kernel and seeing in settings if it actually changed. (If you used HTC to unlock that is) wifi was borked on my buddy's phone (used HTC unlock) with any 2.3 rom.
Sent from my PG86100 using XDA App
no, I used revolution for the unlock... I'm just guessing it's the new 2.3.4 I'll just wait it out a week or 2 and see what happens.
Ditto here. Flashed Synergy earlier today, and no wifi (specifically WPA2). It acts like it's going to connect and then just drops. I've tried the "gingerjane" kernel and Dream Kernel, and none work (and I did verify in the Settings that the kernel had properly been installed). I've even tried flashing different radios just for kicks.
This sucks
Flash the newest Synergy build, both wifi and usb tethering are working now. You will have to be familiar with svn, there is a guide on the second post I believe. Or you can wait for somebody to upload the revision 381. Then you can grab it and flash away.
I've tried again and again, following multiple sets of directions, but for some reason, whenever I try to flash faux's OC UV GB Kernel for my AT&T Atrix, the phone won't boot or get past the boot screen. I have no idea why this could be happening and have tried whatever I could think of to fix the problem but no luck so far.
I've tried to flash previous versions as well as the latest version of faux's kernel using Romracer's latest CWM, but it hasn't worked. I keep having to flash back to the stock AT&T kernel to get the phone to boot up. I've tried this on the HomeBase Rom, DARKSIDE Rom and on the Alien Rom. The ROMs work fine with the stock kernel though.
I also tried flashing CM7 and faux's CM7 but that didn't work either.
Anyone think of why this could be happening and have any suggestions that I could try to get this working?
Thanks in advance for the help.
The right kernal flashes automatically with most roms
sent from my Atrix via XDA premium
marko! said:
The right kernal flashes automatically with most roms
sent from my Atrix via XDA premium
Click to expand...
Click to collapse
When I have flashed a rom like DARKSIDE, which has the kernel built-in, the phone won't boot and I have the same issue, even though it has the correct kernel, unless I flash back to stock at&t kernel.
He has a GB version and a CM version out. Are you sure you're using the correct version for your rom?
carlharsch said:
He has a GB version and a CM version out. Are you sure you're using the correct version for your rom?
Click to expand...
Click to collapse
yes, I have tried the GB AT&T/Unified Version for when i have flashed a GB Rom and I tried the CM7 Kernel for when I flashed CM7, neither kernel was working for their respective roms.
kent1286 said:
yes, I have tried the GB AT&T/Unified Version for when i have flashed a GB Rom and I tried the CM7 Kernel for when I flashed CM7, neither kernel was working for their respective roms.
Click to expand...
Click to collapse
Have you tried to reflash pudding and reinstalling your recovery afterwards? Just be sure to reflash the right sbf
Sent from my MB860 using xda premium
After installing a new kernel/rom, did you full wipe your phone?
Alcapone263 said:
Have you tried to reflash pudding and reinstalling your recovery afterwards? Just be sure to reflash the right sbf
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Sorry it took a while for me to get back to you, thanks for your suggestion, I did try this but still no results. I reflashed pudding and put recovery back and then tried flashing the kernel again but it still gives me the same result. Anyone have any other ideas i could try?
I also tried doing a full wipe after flashing the kernel as well, that didn't work either.
sorry man, i can't think of anything that might be causing that problem. you should send Faux123 a tweet and ask him about it, if he has spare time he might be able to help you out
Does anyone have any ideas i could try to get this workong? I'd really love to use faux's kernel on my atrix.
Sent from my MB860 using XDA Premium App
Have you gone through the fastboot oem unlock commands after flashing the pudding sbf?
jgc121 said:
Have you gone through the fastboot oem unlock commands after flashing the pudding sbf?
Click to expand...
Click to collapse
yes, i did, even though its already unlocked, and it just said that it was already unlocked
kent1286 said:
I've tried again and again, following multiple sets of directions, but for some reason, whenever I try to flash faux's OC UV GB Kernel for my AT&T Atrix, the phone won't boot or get past the boot screen. I have no idea why this could be happening and have tried whatever I could think of to fix the problem but no luck so far.
I've tried to flash previous versions as well as the latest version of faux's kernel using Romracer's latest CWM, but it hasn't worked. I keep having to flash back to the stock AT&T kernel to get the phone to boot up. I've tried this on the HomeBase Rom, DARKSIDE Rom and on the Alien Rom. The ROMs work fine with the stock kernel though.
I also tried flashing CM7 and faux's CM7 but that didn't work either.
Anyone think of why this could be happening and have any suggestions that I could try to get this working?
Thanks in advance for the help.
Click to expand...
Click to collapse
bump.......Anyone have any suggestions as to how I can get this working please?
atrix 4g
im new to motorola android devices and have no clue what im doing. i have rooted my atrix but still dont know the whole process for installing everything. i have the rooted stock 2.3.6 bloated at&t rom.. is their a kernel i can install that will allow me to overclock on stock gb?
Sorry to tell you this my man but not all atrixeseses are made the same. I confirmed this by using 3 different atrixes (long story).
Sent from my A200 using xda app-developers app
I am running CWM and the stock rom and like it much better. It seems to connect at startup to t-mobil 4g, but after a few minutes goes to edge. Is there anyway to make it stay on 4g? Is there a modem that I can flash that will work with the stock rom?
Thanks!!
I'm pretty sure that all the 4G radio/modem suggestions that are supposed to work on T-Mobile can be used on the stock ROM as long as the phone is rooted.
After the phone is rooted, would you use cwm to install the modem?
I think on the stock rom i cant force the hspa..just changed the rom to saurom so u can get better 4g and u can force it.
Sent from my SAMSUNG-SGH-I717 using XDA
I tried saurom, my phone would not work with it
homesite said:
I tried saurom, my phone would not work with it
Click to expand...
Click to collapse
then probably u did something worng. It should works for everyone
Hi, just bought an og ,coming from HTC phone. There r some new things it looks like. What is a EFS ? Back up EFS partition ? I'm gonna used the my att og on straight talk , any things I should watch out for ? Should stay 100 % stock until service is activated? I'm looking for a near stock stable optimized rom, any to recommend ? Which kernel is good for it ? Htcs have hboot , it looks like lgs use different things , how do I go around flashing radios ? Excuse me for throwing out tons of noob questions , gonna start somewhere
0 help lol
Welcome. There is a zip file that you put on your external SD card somewhere in the optimus g forums that will backup your efs partition.
Edit: I found it for you if you haven't had any luck finding it. Also.. The efs supposedly holds your imei number and stuff.
http://forum.xda-developers.com/showthread.php?t=2164749
Sent from my Optimus G using xda app-developers app
Ic, so how would EFS be deleted ? always just had CDMA phones, never heard of ESNs deleted by mistake. Are radios to be flashed in recovery too ? My HTC flashes radios in fastboot.
Optimus 3D
optimusv45 said:
Ic, so how would EFS be deleted ? always just had CDMA phones, never heard of ESNs deleted by mistake. Are radios to be flashed in recovery too ? My HTC flashes radios in fastboot.
Click to expand...
Click to collapse
It is real, there are a lot of hard bricks because of it, look in the Optimus 3D P920 forum, a lot people lost their IMEI and couldn't get it going. And yes, you can flash different radios
whats a very stable and optimized near stock rom for this phone ? what kernel can go with it ?
optimusv45 said:
whats a very stable and optimized near stock rom for this phone ? what kernel can go with it ?
Click to expand...
Click to collapse
MysteryEmotion's eg8 ROM is the newest and may have the best chance of being actively maintained in the future. He also builds his own kernel with tweaks.
Ic, what version android is MysteryEmotion's eg8 ROM ? Has anyone tried houstonn's Stock 4.1.2 Jelly Bean LG-E970 At&t ? I don't need the latest version android or anything , mostly seeking for stability and everything work.
optimusv45 said:
Ic, what version android is MysteryEmotion's eg8 ROM ? Has anyone tried houstonn's Stock 4.1.2 Jelly Bean LG-E970 At&t ? I don't need the latest version android or anything , mostly seeking for stability and everything work.
Click to expand...
Click to collapse
Mystery's eg8 is based on 20j 4.1.2 stock with addons and enhancements. I think Houstonn's is a port from another OG that was released with jellybean before AT&T got the update.
Can you please clarify a bit? Do you mean stock LG or stock Google/Android.
Stock LG: Either go with MysteryEmotion's eg8 Or SnowJBLeaopard's SnowJB -almost forgot SlickRom, that is super debloated, but not really to my liking. (forgot who posted it)
Stock Google/Android: Either Shelnutt's Unofficial 10.1 Or houstonn's Vanilla Rootbox. The latter has a lot of "bells and whistles" while the former is basically stock. Also should mention TuxAttack's Beanstalk. Also a lot of bells and whistles though.
optimusv45 said:
whats a very stable and optimized near stock rom for this phone ? what kernel can go with it ?
Click to expand...
Click to collapse
Personally I would go with dvhexers CM 10.1.2, and his included kernel is quite good. This is stock android/CM though, with a bit of searching and patience you can run LG Home on top of this, with the original weather/clock and calendar.
i.e.
http://forum.xda-developers.com/showthread.php?t=2198225
So then you have the best of both. Too many options for you not to get out there any try a few. But @dvhexers CM10.1 I think was perfectly stable.
I am using the JellyBean ROM. I have been on it for about a month now and haven't had any issues that wasn't caused by me
Though, other than that I suggest mysteryemotionz
okay, I'll probably go with ME eg8 and his V6.1 kernel for 4.1.2. just being on the safe side , should i flash a JB radio for this rom ? if yes, do i flash in RECOVERY ? i have found a radio called CWM-ATTJB-Radio, is this the right one ? I am being carefully about this because my HTC flash radios in Hboot with PG86IMG files... as far as flashing kernel, do u guys recommend flashing with Flash Image GUI for this phone ? and is wiping Dalvik always needed for flashing kernels for this phone ? i thanked everyone that helped.
theregkid said:
I am using the JellyBean ROM. I have been on it for about a month now and haven't had any issues that wasn't caused by me
Though, other than that I suggest mysteryemotionz
Click to expand...
Click to collapse
Hi theregkid, a month of stability is very good. can you tell me which JellyBean ROM you are referring to ? ME's eg8 ?
optimusv45 said:
Hi theregkid, a month of stability is very good. can you tell me which JellyBean ROM you are referring to ? ME's eg8 ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2359068
Sorry, for some reason I called the ROM 'Beanstalk' Jellybean.
It was ported from the infuse 4G. I have tried just about every ROM and this one is my favorite.
Maybe it is just me, but again I haven't had any real issue with it. I did have a kernel crash from MysteryEmotionz kernel though. I then flashed Smoochas and all is good.
The crash occurred whenever I tried to run a QR code app. (any QR code app)
optimusv45 said:
okay, I'll probably go with ME eg8 and his V6.1 kernel for 4.1.2. just being on the safe side , should i flash a JB radio for this rom ? if yes, do i flash in RECOVERY ? i have found a radio called CWM-ATTJB-Radio, is this the right one ? I am being carefully about this because my HTC flash radios in Hboot with PG86IMG files... as far as flashing kernel, do u guys recommend flashing with Flash Image GUI for this phone ? and is wiping Dalvik always needed for flashing kernels for this phone ? i thanked everyone that helped.
Click to expand...
Click to collapse
ME's eg8 is modified stock, it should come with his kernel already. Yes the radio's flash in CWM as zips, you can manually push with ADB/Fastboot commands, but why bother.
What are you referring to by "Flash image GUI" ? If you mean "clockwork mod recovery" or "TWRP" then yes. Once you download the freegee app from the market, it will give you the option for either, choose which ever you like more, personally I prefer CWM. Yes always wipe dalvik cache after you flash a kernel, so it can recreate the DEX files for that particular kernels methods of execution.
[r.]GimP said:
ME's eg8 is modified stock, it should come with his kernel already. Yes the radio's flash in CWM as zips, you can manually push with ADB/Fastboot commands, but why bother.
What are you referring to by "Flash image GUI" ? If you mean "clockwork mod recovery" or "TWRP" then yes. Once you download the freegee app from the market, it will give you the option for either, choose which ever you like more, personally I prefer CWM. Yes always wipe dalvik cache after you flash a kernel, so it can recreate the DEX files for that particular kernels methods of execution.
Click to expand...
Click to collapse
Flash image GUI is an image flashing app from the market. MiRaGe, known for his rom and kernel works for Optimus V and HTC Evo V 4G, recommends flashing his kernels with this app. I have been using it to flash kernels. So i was just wondering if this would work with kernels for this phone , i guess every phone is different.
optimusv45 said:
Flash image GUI is an image flashing app from the market. MiRaGe, known for his rom and kernel works for Optimus V and HTC Evo V 4G, recommends flashing his kernels with this app. I have been using it to flash kernels. So i was just wondering if this would work with kernels for this phone , i guess every phone is different.
Click to expand...
Click to collapse
I'm not familiar with those apps, and don't recall seeing them mentioned here at all. FWIW, I personally avoid any apps that flash things. They may make things convenient, but I've seen too many issues caused on too many devices by apps that flash stuff.
Just read the relevant threads to learn about what you are doing, and flash manually from recovery. That way, you're in control of what you're doing. Less chance of snafus caused by incompatibilities...
i am in complete stock . rg8 is 700 mb ?.... most roms i use for my HTC are around 150..
Thanks everyone for all the help. Now I'm running eg8 , everything seems fine execept the first time I took a picture had a very strange crash. The screen went blank and codes started rolling up the screen , it went on for about 3 minutes then phone restarted itself ...
Hey guys! I'm using a Galaxy Note with a Bell board (was originally AT&T but that bricked because at the time I thought flashing an N7000 ROM would work, D'oh!) and I want to upgrade to a Jelly Bean Rom. I'm using Blackstar XI, a 4.0.4 ROM, and I'm looking for a lightweight JB rom. It can lack stylus/pen support, I found myself not using that feature as much as I thought I would.
Would I run into any issues using a QuincyATT Cyanogenmod 10.1.3 ROM, considering it's a Bell note board? Would I need to unlock my SIM first? And I recall there being a trick with Notepad++ I needed to do in order to make it work, even on my AT&T board.
I just have an issue with heavy RAM usage at boot and I can't even run some apps, since I know touchwiz is stupid.
Anyone willing to help me get it running on my note? Any help would be appreciated!
MoronDroid said:
Hey guys! I'm using a Galaxy Note with a Bell board (was originally AT&T but that bricked because at the time I thought flashing an N7000 ROM would work, D'oh!) and I want to upgrade to a Jelly Bean Rom. I'm using Blackstar XI, a 4.0.4 ROM, and I'm looking for a lightweight JB rom. It can lack stylus/pen support, I found myself not using that feature as much as I thought I would.
Would I run into any issues using a QuincyATT Cyanogenmod 10.1.3 ROM, considering it's a Bell note board? Would I need to unlock my SIM first? And I recall there being a trick with Notepad++ I needed to do in order to make it work, even on my AT&T board.
I just have an issue with heavy RAM usage at boot and I can't even run some apps, since I know touchwiz is stupid.
Anyone willing to help me get it running on my note? Any help would be appreciated!
Click to expand...
Click to collapse
If you like blackstar, I would just flash Blackstar Blackjelly after doing a backup. It's what I've been running as my go-to on my Telus note. The other jb's are great too, but cm comes with the odd small bug like echo on speaker phone. Most of the customizations make them worth trying though.
Sent from my SAMSUNG-SGH-I717
Sweet. I could give that a try if the Cyanogenmod ROM doesn't work. Is there anything I need to do in preparation, since this is technically a Bell note? Or can I just go ahead and flash the ROM without any changes to the ZIP?
MoronDroid said:
Sweet. I could give that a try if the Cyanogenmod ROM doesn't work. Is there anything I need to do in preparation, since this is technically a Bell note? Or can I just go ahead and flash the ROM without any changes to the ZIP?
Click to expand...
Click to collapse
I'm assuming you have an unlocked bootloader already since you are running cm. Just be sure to have latest cm recovery or gimmeitorilltell's twrp (although other versions work with Jellybean, if you try kitkat or lollipop you'll have problems). Make sure you are flashing a quincyatt rom.
I have been using SGH-I717ATT-UCMD3-Modem with great success for a radio. Your mileage may vary.
If you get no signal, before blaming the rom, first check your mobile networks access point names and settings to be sure they match your carrier. (A good idea is to take a couple screenshots of your settings now before you flash any new roms as there are quite a few numbers involved)
Sent from my SAMSUNG-SGH-I717
Good news! I tried the CM10.1.3 ROM and it worked well minus two small gripes:
1. Occasional freeze/hang on lock screen, causing it to reboot
2. Random artifacting/crashes during video playback/browsing through gallery
I'm gonna say this is the best performing ROM I've tried so far, but I'm going to give BlackJelly a try! I'll keep you posted. Just figured I'd give Cyanogenmod a proper shot now that I know how to install ROMs!
developweb said:
I'm assuming you have an unlocked bootloader already since you are running cm. Just be sure to have latest cm recovery or gimmeitorilltell's twrp (although other versions work with Jellybean, if you try kitkat or lollipop you'll have problems). Make sure you are flashing a quincyatt rom.
I have been using SGH-I717ATT-UCMD3-Modem with great success for a radio. Your mileage may vary.
If you get no signal, before blaming the rom, first check your mobile networks access point names and settings to be sure they match your carrier. (A good idea is to take a couple screenshots of your settings now before you flash any new roms as there are quite a few numbers involved)
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Time for BlackJelly! Downloading now.
I also may need some help getting the SIM to work once this ROM is on. So that way, I can use this stock-rom based OS for actual phone things instead of it just being a tiny tablet! Yay!
Can you point me in the direction of the latest TWRP recovery that I can flash through Odin?
MoronDroid said:
Time for BlackJelly! Downloading now.
I also may need some help getting the SIM to work once this ROM is on. So that way, I can use this stock-rom based OS for actual phone things instead of it just being a tiny tablet! Yay!
Can you point me in the direction of the latest TWRP recovery that I can flash through Odin?
Click to expand...
Click to collapse
I'm not sure about Odin, but I flashed the latest TWRP to my device using Rashr from Google Play store.
Other install methods are described here:
https://twrp.me/devices/samsunggalaxynote1att.html
Sent from my SAMSUNG-SGH-I717
developweb said:
I'm not sure about Odin, but I flashed the latest TWRP to my device using Rashr from Google Play store.
Other install methods are described here:
https://twrp.me/devices/samsunggalaxynote1att.html
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Upgrading my recovery now, yay! I also have the Phase kernel because I've heard a lot of good things about it.
MoronDroid said:
Upgrading my recovery now, yay! I also have the Phase kernel because I've heard a lot of good things about it.
Click to expand...
Click to collapse
Backup, backup, backup. If TWRP successfully installs then backup. If something goes wrong you can revert everything or just the boot partition. (Kernel)
Sent from my SAMSUNG-SGH-I717