Quick Question: Is 3G available on an unlocked/flashed Droid X2 using the MetroPCS network, and if so, what must I do to properly enable it (Currently not working, have a blue 1x with both arrows to the left, no 3G symbol displayed)?
Info on Phone:
Settings>About Phone:
System Version: 1.3.380.M3870.Verizon.en.US
Model Number: Droid X2
Android Version: 2.3.4
Baseband Version:n_03.13.28s
Kernel Version: 2.6.32.9-00005-g2440abah
[email protected] #2
Build Number: 4.51A-DTN-150-30
ERI Version: 1357
PRL Version: 3026
Settings>About Phone>Status:
Network: Roaming Indicator OFF
Mobile Network Type: 1xRTT
Service Sate: In Service
Roaming: NOT Roaming
Mobile Network State: Connected
WiFi/MAC Address: Unavailable
If this question has been asked, I apologize in advance for not being able to find it... Yes, I did search on Google and throughout the forums, and was unable to locate a similar thread. If you link me a previous thread that you know of, I would be very grateful!
Thanks in advance for any/all response!
EDIT: Found 1 similar thread, but ONLY shows steps for HTC EVO. Anyone know of a thread, which is at least closely related to DX2's?
Thread: http://forum.xda-developers.com/showthread.php?t=1288216
Those are the steps for sprint . Could find the settings for vz & these steps could work. Advice- nandroid BU before you experiment. I may post more....
skwoodwiva said:
Those are the steps for sprint . Could find the settings for vz & these steps could work. Advice- nandroid BU before you experiment. I may post more....
Click to expand...
Click to collapse
Any additional info is more than welcomed, and thanks for the advice.
Just restarted my phone, and now I have NO data connection. Stupid flashing roaming indicator triangle...lol
Try rebooting. Sometimes that means you need to active. Does *228 work? There are other codes you could use like 0228 or is it 5 digits. Google for it.
Rebooting 5 times worked.. Don't know why the first 4 times didn't do the trick. May have had to do with me deleting All Cache. Still have to look for Verizon steps to get 3G on Metro PCS though lol
Thanks for advice.
Try running my milestone port & in /etc there are a zillion apns config files. It may pick the right one on activation or you could hack one of those.
Goto /etc/ apns-conf.xml it is all set to activate on metro-pcs!!
http://forum.xda-developers.com/showpost.php?p=24418360&postcount=114
Need help
Ok i'm new to this but i got a Droid X2 flashed with metro pcs calls and text work perfect but i want to get 3g working and picture text... can you guys help me out or point me to the right place i've spend hours googling but can't find anything but this metropcsflash blog thats gives step by step but it didn't work at all... thanks in advance
Related
ok this phone a brand new, i can receive calls and text but when i dial a number and try to make a call the phone restarts
This is factory unlocked and not rooted
Try flashing a newer radio rom.
I dont want to root it incase i cant get the original rom back.
It is weird as, i have tried with every sim card to make calls and it works but when i put the 3 sim in does plays up
We experienced the same issue on some Turkish networks as well and flashing a newer radio rom fixed the problem. Flashing roms and rooting are totally different. What you need is a newer version of your current baseband ( radio rom ) sbf and official motorola software flasher " RSD Lite 5.3 "
Hope it helps.
Thank you so much for that Semseddin.
My problem solved, i just flashed it using RSD lite 4.9
Thanks everyone
Hi. I've been having the exact same issue. I've got an unlocked AT&T Atrix and I'm trying to use a Three UK sim (I'm in the UK). I'm a bit new to the world of android, can someone post a link to an appropriate Radio Rom?
Thanks for any help!!
OK after a little more web searching I've found a (sort of) solution -
"Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working."
Problem is of course that you can't use your 3G connection. Hope this helps anyone else with the same issue.
Link to article - https : // supportforums.motorola .com/message/379232
Why is it always 3 that cause a problem?
When the Nokia N900 came out, that wouldn't work with 3 initially until a couple of updates later!
lowndes783 said:
OK after a little more web searching I've found a (sort of) solution -
"Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working."
Problem is of course that you can't use your 3G connection. Hope this helps anyone else with the same issue.
Link to article - https : // supportforums.motorola .com/message/379232
Click to expand...
Click to collapse
May not work for Pay as you go? I didn't think that it had 2G fall back?
So, I have scoured the forums and have not yet found a solution to my current problem.
I was able to originally root my phone using the moto-fastboot method that has been posted on these threads several times to root my phone. Upon rooting I installed some standard applications to remove bloatware and toy with some of the hardware settings. I worked great. I got a little bit too confident and decided to put a custom rom on it without properly backing up(I thought I did).
So I got stuck into bootloop. Upon searching your extremely handy and helpful forums I found a way to install a new sbf and unbrick my phone using RSD lite. The operating system in now working, but it will not make or receive phone calls or data.
Possibly pertinent information:
System version: 45.0.43.MB867.ACG-nTelos.en.US (this is probably way off)
Model: Milestone X2
Android: 2.3.6
Baseband: N_03..13.56P
Kernel Version: 2.6.32.9-00011-gbc368b9 [email protected] #2
Build Number: 45.0.43
ERI: Version 5
PRL: Version 21100
My Phone number: 000-000-5761 (obviously not correct)
MIN: 0000005761
MEID: A000002C5D4811
Network: nTelos (I have no idea where that network even is)
Signal Strength: -101dBm 0 asu
Mobile network type: CDMA -1xRTT
Service State: In Service
Mobile Network State: Disconnected
I tried again to root my phone to try to put a custom rom on it, but when I try the moto-fastboot method upon entering the command thru abd shell /preinstall/su I get the error "Permission Denied". I have tried the superoneclick method, Pete's method, z4 root, and droid 3 easy root. I am at quite a loss here on what to do next.
Does anyone know of a way I could maybe use the default android recovery to install the proper rom for my phone and where to get the proper rom?
Alternatively, does anyone know where I can get the proper sbf file for the CSpire Motorolla Milestone X2?
I have been searching for a few days, so please don't get mad if I have overlooked a thread. I was very hesitant about posting this thread because I am not a very active member of your forums and I wanted to make sure I searched a lot before asking the same question over again.
I am not saying the problem I am having is completely unique, but I have not seen anyone with my problem. Since my phone is currently useless as a phone I am willing to try a lot more methods.
Update: I have successfully rooted my phone again using this method:
http://forum.xda-developers.com/show....php?t=1823112
Given that I now have root access are there any new options to get my phone to work?
How to change you system number
I have some more updates on my current status. I have received a warranty phone. I will not mail it for a few more days, so if anyone can inform me on how to pull some import files from it for their personal use I will . It is rooted now using the method mentioned above. Upon activating the phone with a rep from the company I got some more possibly useful information. I hope this helps others.
I haven't seen this anywhere, but if you need to change you system phone number do the following:
1. dial ##626 press call
2. enter 000000 for the SPC password
3. MIN is the number for your local network
4. IMSI will fill automatically
5. MDN is your personal phone number
6. CDMA system ID I have not information on this
nateman7097 said:
I have some more updates on my current status. I have received a warranty phone. I will not mail it for a few more days, so if anyone can inform me on how to pull some import files from it for their personal use I will . It is rooted now using the method mentioned above. Upon activating the phone with a rep from the company I got some more possibly useful information. I hope this helps others.
I haven't seen this anywhere, but if you need to change you system phone number do the following:
1. dial ##626 press call
2. enter 000000 for the SPC password
3. MIN is the number for your local network
4. IMSI will fill automatically
5. MDN is your personal phone number
6. CDMA system ID I have not information on this
Click to expand...
Click to collapse
Yoo I have the SAME EXACT ISSUE. How did you get your fixed??? I have tried everything and this seems impossible
Hey there XDA,
I never knew about all those roms and rooting, but i was too impatient to wait for the official release of jelly bean
So i did alot of googling and came across alot of roms, and weird terms.
I did a little research on how to flash my phone to jelly bean and thought i knew how it had to be done.
so i downloaded the rom followed instructions and succesfully flashed the rom.
But now i can't acces the internet.
Everything works, except my normal internet (3g, APN) i dont know.
I really want to keep jelly bean, but i rather have ICS with 3g
Is there any way to keep jelly bean, maybe downgrade to a previous update and have 3g?
or do i have to go back to ICS factory reset to have 3g again?
I did not root my phone by the way.
Thanks for reading, and some help or advise would be great!
Greetz,
Chryxer
The rom was:I9100XXLSJ/I9100OXXLS1/I9100XXLS6
here is some additional data:
model: GT-I9100
android-version
4.1.2
Baseband-version
I9100XXLS6
Kernelversion
3.0.31-462349
[email protected] #3
SMP PREEMPT Tue Nov 6 02:42:23
KST2012
Buildnumber
JZO54K.I9100XXLSJ
Who Is your Provider.
go into settings - more settings - mobile networks - access points and check to see if the internet settings are for your provider.
You may have enter them manually to get internet to work. you can get the required information from your provider;s website.
Cosmic Blue said:
Who Is your Provider.
go into settings - more settings - mobile networks - access points and check to see if the internet settings are for your provider.
You may have enter them manually to get internet to work. you can get the required information from your provider;s website.
Click to expand...
Click to collapse
if i go to acces points, i just get a black screen, there's nothing in there :S
my provider is tele2 (it's a dutch)
any more tips?
while in access point. hit the right mean button to get + new APN and then add tele2 settings.
If you are having trouble finding the settings or entering them, call tele2 and they will walk you through it.
Cosmic Blue said:
while in access point. hit the right mean button to get + new APN and then add tele2 settings.
If you are having trouble finding the settings or entering them, call tele2 and they will walk you through it.
Click to expand...
Click to collapse
mean button?
ok, i found it, i went through the steps and it works!
Thanks alot for your help even though it wasn't really hard whaha
greetz, chryxer
I have a Verizon Droid DNA with me here in India. I am using a local sim which works after changing to global mode. Voice, SMS, Data are working but for some reason i am not able to connect to the local Wifi connections here.
I was able to use them before inputing the new local sim. Moreover, i also did a hard reset afterwards without the local sim card and the wifi started working. But as soon as i use the local sim and change the network to global mode the wifi stops working and then i have to hard reset without the sim card to be able to use WiFI.
please help i am a noob here.
would unlocking bootloader and then rooting the phone help me?
Plz?
I did two custom roms and still couldn't get over it. Someone pls help. will flashing the radio help?
ThRiLLeR 3117 said:
I did two custom roms and still couldn't get over it. Someone pls help. will flashing the radio help?
Click to expand...
Click to collapse
Good to see a fellow Indian . I live in Delhi.
Flash a custom Rom. If ur s-on then don't forget to flash boot.img file via fastboot or flashgui.
If s-off then d/l newt or viper Rom. Profit
iam using viper 1.2. Its brilliant.
Sent from viperDNA using Tapatalk2
Did you try the regional force WiFi setting in venom tweaks?
Sent from my ADR6425LVW using Xparent Red Tapatalk 2
amit_sen said:
Good to see a fellow Indian . I live in Delhi.
Flash a custom Rom. If ur s-on then don't forget to flash boot.img file via fastboot or flashgui.
If s-off then d/l newt or viper Rom. Profit
iam using viper 1.2. Its brilliant.
Sent from viperDNA using Tapatalk2
Click to expand...
Click to collapse
No i didn't try it yet. I'm s-on so ill have to flash the boot.img via fastboot.
Btw, did you use this rom with local sim cards in Delhi on a Verizon HTC Droid DNA?
CharliesTheMan said:
Did you try the regional force WiFi setting in venom tweaks?
Sent from my ADR6425LVW using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
No i didn't. where can i get that?
I did the viper DNA rom still no solution pls tell me how to do the wifi regional force in venom tweaks
ThRiLLeR 3117 said:
No i didn't try it yet. I'm s-on so ill have to flash the boot.img via fastboot.
Btw, did you use this rom with local sim cards in Delhi on a Verizon HTC Droid DNA?
Click to expand...
Click to collapse
Yes, i WAS using the same rom with my vodafone micro-sim in New Delhi. No issues with wifi and 3G.
Currently iam using newts Sens5 rom
Btw, is your wifi connection name is even shown in wifi selection screen. You need to select it to connect to it.
ThRiLLeR 3117 said:
I have a Verizon Droid DNA with me here in India. I am using a local sim which works after changing to global mode. Voice, SMS, Data are working but for some reason i am not able to connect to the local Wifi connections here.
I was able to use them before inputing the new local sim. Moreover, i also did a hard reset afterwards without the local sim card and the wifi started working. But as soon as i use the local sim and change the network to global mode the wifi stops working and then i have to hard reset without the sim card to be able to use WiFI.
please help i am a noob here.
Click to expand...
Click to collapse
i have the same problem mentioned above with my butterfly x920e but i have the the phone with global open cid HTCCN701.
I have been purchased the phone from china and now i am in Pakistan.
But wifi with the chinese sim is working and when i insert any sim of pakistan wifi is automatically disabled and said "Not in Range".
After a full reset without sim card will do wifi oprational.
Any type of help appriciated.
thanks in advance.
---------- Post added at 06:41 PM ---------- Previous post was at 05:47 PM ----------
Hi there i just bought a HTC BUTTERFLY X920e from Yiwu China.
I just started using it and there is no issue with any of these voice,sms,mms,usb internet passthrough But The "wifi" ??????.
The problem i am facing is WiFi was able to connect when i opened the package but when i inserted the simcard.
I am not being able to connect to wifi as it start searching,
and never find out the wifi even the one i connected and used before inserting the sim.
it is displaying the name of the WiFi which i used earlier but that's not in range any more.
I tried on almost 5 diffferent Roms on it and none of them able to wifi oprational with a simcard.
I did the factory reset and it started working without the sim but as soon as i put the simcard again i have the same problem.
Handset Details:
Model: HTC Butterfly X920e(No SD CARD Slot available)
ANDROID VERSION 4.1.1
HTC SENSE version: 4+
Software Number: 1.0.0.X920e
HTC SDK API LEVEL: 4.64
HTC Extension version: HTCEXtention_Sense45_4
KERNEL VERSION: 3.4.10-g095d75c [email protected] #1 SMP PREEMPT
Baseband version: 3A.22.306.10_10.07.1060.04D
BUILD NUMBER: 1.10.1400.1 CL146273 release-keys
Browswer Version: WebKit/534.30
Any Help For This is highly appriciated
Thanks In Advance
SheikhSaqib said:
i have the same problem mentioned above with my butterfly x920e but i have the the phone with global open cid HTCCN701.
I have been purchased the phone from china and now i am in Pakistan.
But wifi with the chinese sim is working and when i insert any sim of pakistan wifi is automatically disabled and said "Not in Range".
After a full reset without sim card will do wifi oprational.
Any type of help appriciated.
thanks in advance.
---------- Post added at 06:41 PM ---------- Previous post was at 05:47 PM ----------
Hi there i just bought a HTC BUTTERFLY X920e from Yiwu China.
I just started using it and there is no issue with any of these voice,sms,mms,usb internet passthrough But The "wifi" ??????.
The problem i am facing is WiFi was able to connect when i opened the package but when i inserted the simcard.
I am not being able to connect to wifi as it start searching,
and never find out the wifi even the one i connected and used before inserting the sim.
it is displaying the name of the WiFi which i used earlier but that's not in range any more.
I tried on almost 5 diffferent Roms on it and none of them able to wifi oprational with a simcard.
I did the factory reset and it started working without the sim but as soon as i put the simcard again i have the same problem.
Handset Details:
Model: HTC Butterfly X920e(No SD CARD Slot available)
ANDROID VERSION 4.1.1
HTC SENSE version: 4+
Software Number: 1.0.0.X920e
HTC SDK API LEVEL: 4.64
HTC Extension version: HTCEXtention_Sense45_4
KERNEL VERSION: 3.4.10-g095d75c [email protected] #1 SMP PREEMPT
Baseband version: 3A.22.306.10_10.07.1060.04D
BUILD NUMBER: 1.10.1400.1 CL146273 release-keys
Browswer Version: WebKit/534.30
Any Help For This is highly appriciated
Thanks In Advance
Click to expand...
Click to collapse
You came to the right place. I can tell you the solution hopefully.
Just install custom Rom "VIPERDNA"
After that go to "Venom tweaks" app > "misc" > Check "Disable HTC SmartSYNC" and "Force enable WIFI N Support"
after that go to settings>call>preferred network and chose LTE/CDMA. Now the local signals will be gone.
Do a reboot of the phone and then connect your wifi. now go back to call and change your preferred network to GSM only. your signals will appear and the wifi will work. But the thing is you don't have to switch off your wifi ever.
If by mistake you do switch off wifi you would have to change your preferred network to LTE/CDMA then do a reboot and connect wifi and afterwards change your preferred network to GSM only.
ThRiLLeR 3117 said:
You came to the right place. I can tell you the solution hopefully.
Just install custom Rom "VIPERDNA"
After that go to "Venom tweaks" app > "misc" > Check "Disable HTC SmartSYNC" and "Force enable WIFI N Support"
after that go to settings>call>preferred network and chose LTE/CDMA. Now the local signals will be gone.
Do a reboot of the phone and then connect your wifi. now go back to call and change your preferred network to GSM only. your signals will appear and the wifi will work. But the thing is you don't have to switch off your wifi ever.
If by mistake you do switch off wifi you would have to change your preferred network to LTE/CDMA then do a reboot and connect wifi and afterwards change your preferred network to GSM only.
Click to expand...
Click to collapse
So if i go out of my wifi range ill have to do the entire process over or will it allow me to reconnect?
mohammadalidugan said:
So if i go out of my wifi range ill have to do the entire process over or will it allow me to reconnect?
Click to expand...
Click to collapse
No only if you disable wifi, wifi is still enabled when you're out of range. That's how it searches for available networks.
Translation: Don't turn off wifi
Help request
CharliesTheMan said:
No only if you disable wifi, wifi is still enabled when you're out of range. That's how it searches for available networks.
Translation: Don't turn off wifi
Click to expand...
Click to collapse
Sir, the VENOM ROM v1.3.1 doesn't work with HTC Butterfly x920e. So there is no way we can use the TwEEKS.
BTW : I have exactly the same problem as another user described. When I put in Chinese SIM Card, all things start working including Wifi and Bluetooth. As soon as I out in any other SIM while visiting other countries, the Wifi and Bluetooth Stop working. Its the permission problem.
We need your expert advice. Please kindly help
I'm experiencing same problem my dna is boot loader unlocked s off rooted n I'm using viper dna rom i tried viper tweaks nothing is helping please help me
Hi XDA ,
Am new in the Forum & First of all thanks to all of you for helping the forum and people. I'm having difficulties and I cant seem to find the way to fix this(its been 2 weeks)
My problem is the following: I have a Samsung Galaxy Note 3 details:
software version: N900PVPUBMI3
hardware version N900P.00
Status: network: Digital roaming
mobile network type CDMA-AxRTT
Android 4.4.2
KERNEL:[email protected]#1
A friend bought me this phone and called my carrier METROPCS and made them set up the phone so I could use it. they asked him for imei and sim number. He was able to use the phone and 4GLTE(he was doing this to verify it was unlocked) later on he gave me the phone and I had to do the same procedure he did but first I did a factory data reset.
After it I wasn't able to set it up again.
I've noticed that APN SETTINGS has disappeared from the menu, cant search for networks, when I load IMEI it no longer shows the imei but it shows MEID B0000000 and besides all of this I have a message that says SIM CARD INVALID.(but the sim card works perfectly on my other phone)
I will all my life appreciate if you help me with this matter please!
PS. phone is rooted as far as I know(root check on Google play store said it was)
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
XDAGeorge305 said:
Hi XDA ,
Am new in the Forum & First of all thanks to all of you for helping the forum and people. I'm having difficulties and I cant seem to find the way to fix this(its been 2 weeks)
My problem is the following: I have a Samsung Galaxy Note 3 details:
software version: N900PVPUBMI3
hardware version N900P.00
Status: network: Digital roaming
mobile network type CDMA-AxRTT
Android 4.4.2
KERNEL:[email protected]#1
A friend bought me this phone and called my carrier METROPCS and made them set up the phone so I could use it. they asked him for imei and sim number. He was able to use the phone and 4GLTE(he was doing this to verify it was unlocked) later on he gave me the phone and I had to do the same procedure he did but first I did a factory data reset.
After it I wasn't able to set it up again.
I've noticed that APN SETTINGS has disappeared from the menu, cant search for networks, when I load IMEI it no longer shows the imei but it shows MEID B0000000 and besides all of this I have a message that says SIM CARD INVALID.(but the sim card works perfectly on my other phone)
I will all my life appreciate if you help me with this matter please!
PS. phone is rooted as far as I know(root check on Google play store said it was)
Click to expand...
Click to collapse
You might try installing this app it find/gives all the hidden info on your device http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 it will give you APN's MEID AND IMEI . All you have to do is download to your PC, it my download as a zip file. Just use 7zip and rename it to an apk, then copy and paste it to your internal sd card via your charging cable. Then click on apk and install. Enjoy !!!
BTW your MEID is on a label under the battery !!!
jimzweb1 said:
You might try installing this app it find/gives all the hidden info on your device http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 it will give you APN's MEID AND IMEI . All you have to do is download to your PC, it my download as a zip file. Just use 7zip and rename it to an apk, then copy and paste it to your internal sd card via your charging cable. Then click on apk and install. Enjoy !!!
BTW your MEID is on a label under the battery !!!
Click to expand...
Click to collapse
Hi Jim/XDA
I'm still not able to connect to the network. Regarding the IMEI on the back part i know its there however what im saying is that im not able to see my imei through command when i dial *#06#
i as well had this errors today when i woke up:
: LTE:ESM-x EMM-14(ive seen this error when this issue started but it dissapeared and it came back know)
data roaming: you have lost data connectivity because you left your home network with data roaming turned off.
On mobile networks i remember i use to be able to select many(GSM,CDMA,etc) now in network mode i only see 2 options LTE/CDMA,CDMA. Currently LTE/CDMA is selected and if you just look at the network mode option without actually opening it it shows CDMA/LTE/EVDO.
Also when i opened the SCRTN it shows on black screen.
I tried to do some minor changes on Galaxy tools like the SIM UICC UNLOCK all mps,sales,default code on XAS. Factory & keystring ON. MSL/SPC show 222222.
After i did SIM UICC UNLOCK and restarted phone know took away all errors but i see the signal bars faded out and with a little red x on top of it. I've read the manual but im still wondering if there might still be things to set on a particular way that are not specified on it Can you please help me set this up properly?
XDAGeorge305 said:
Hi Jim/XDA
I'm still not able to connect to the network. Regarding the IMEI on the back part i know its there however what im saying is that im not able to see my imei through command when i dial *#06#
i as well had this errors today when i woke up:
: LTE:ESM-x EMM-14(ive seen this error when this issue started but it dissapeared and it came back know)
data roaming: you have lost data connectivity because you left your home network with data roaming turned off.
On mobile networks i remember i use to be able to select many(GSM,CDMA,etc) now in network mode i only see 2 options LTE/CDMA,CDMA. Currently LTE/CDMA is selected and if you just look at the network mode option without actually opening it it shows CDMA/LTE/EVDO.
Also when i opened the SCRTN it shows on black screen.
I tried to do some minor changes on Galaxy tools like the SIM UICC UNLOCK all mps,sales,default code on XAS. Factory & keystring ON. MSL/SPC show 222222.
After i did SIM UICC UNLOCK and restarted phone know took away all errors but i see the signal bars faded out and with a little red x on top of it. I've read the manual but im still wondering if there might still be things to set on a particular way that are not specified on it Can you please help me set this up properly?
Click to expand...
Click to collapse
Is this a Sprint variant? If so, you shouldn't have factory reset the phone. It looked like the phone was previously flashed to MetroPCS and by resetting the phone, it removed all the carrier data.
You will have to reflash the phone to get it working again.
nature954 said:
Is this a Sprint variant? If so, you shouldn't have factory reset the phone. It looked like the phone was previously flashed to MetroPCS and by resetting the phone, it removed all the carrier data.
You will have to reflash the phone to get it working again.
Click to expand...
Click to collapse
Is there a tutorial i could follow here ?
I greatly appreciate your help,
Regards
George
Hey guys, for those who need to edit an APN (Access Point Names), there is a little secret.
Go Settings, and scroll down the list. You will find a search box. Type there Access Piont Names and here it is.
The steps above are neccesary, since APN setting is hidden.