Related
I have successfully been able to root and install everything on my Mytouch4G just fine, however, when I tried to install my wife's Vibrant, I am stuck. Here is what I have done:
1) I rooted successfully using superoneclickv1.9.1
2) I installed ROM Manager and also downloaded the Auxora ROM to get ready to install
3) When I flash CWM recovery, it says current and latest recover is 2.5.1.2 (concern here that my mytouch says 3.0.2.4 - do different phones install differently with CWM?). When I look at all CWM recoveries I also notice there is two seemingly more current versions available 2.5.1.3 and 2.5.1.4. I have left it at .2 but wondering why all the versions.
4) When I reboot into recovery, I always get the stock recovery and have not been able to get CWM recovery so I am unable to flash my Auxora ROM. I ran update packages numerous times, and get a signature verification error. I have tried a recovery 3e patch that does not work either. I also gave a try at downloading and SDK, but received temp root errors (phone is already rooted).
After reading many posts, I cannot seem to get a direct answer on what I should do to get CWM to actually boot properly, so I can flash a ROM. Someone said to flash the stock JDK rom, but if I can't boot into recovery, how can I flash anything.
Any help would be greatly appreciated.
You need to get a program for your pc called odin to get back to stock. you can find that and instructions on how to use it if you search for the daily updated vibrant bible its GREAT
http://forum.xda-developers.com/showthread.php?t=849028
going to stock eclair heres a a great guide
So going back to stock eclair will then allow me to install CWM recovery then load roms?
Every once n a while I haft do the install packages thing twice before it gives me clockwork green
. Hope this helps.. o n btw u should look at some of the other roms in the bible before u try auxora
yes u should go back to stock eclair for every rom, in my opinion. Then after that do the 3 button combo and install packages and u will have to do it twice and then the green screen will kick in and ready to rock a new rom.
i hope this helps
What is your current firmware?
I see you posted over in the "NOOB GUIDE" thread, you should really try to root using the method posted there and not any one click root apps.
This should be the root method everyone uses:http://forum.xda-developers.com/showthread.php?t=723479
After root your phone recovery should be blue. Choose "reinstall packages" gives you green recovery(this may need to be repeated multiple times to work possibly including flashing CwMRecovery with ROM manager. I recently did it 5 times b4 i got green recovery)Once you access green recovery chose "apply sdcard:update.zip" go into advanced and choose "reboot recovery" This should give you red recovery. Do a nandroid backup and flash away. Good luck!
Another option you could do is to download SGS kernel flasher from the market and flash a voodoo injected kernel with that app. Then when you boot into recovery you will have red voodoo recovery and you can flash away.
Odin to stock the best way to flash a new rom
Sent from my SGH-T959 using XDA Premium App
jman531 said:
So going back to stock eclair will then allow me to install CWM recovery then load roms?
Click to expand...
Click to collapse
The stock 2.2 that Samsung distributed with their Kies tool has a recovery that checks signatures. Everything earlier does not check signatures. So either use something earlier to get CWM running, or use a ROM that doesn't have the stock 2.2 recovery in the first place, or mod your recovery using the method described in http://forum.xda-developers.com/showthread.php?t=833423
Using Odin to go back to stock Eclair between your flashes of modded roms has the benefit of taking care of this, and also can clear up left over bits and pieces that may interfere with the proper function of your new ROM.
ok, i followed the instructions and am back to eclair, however, whenever I install packages, it just reboots the phone, not even back into stock recovery. I use the 3 key method and get into recovery, run install packages, and the phone just boots back up...its like it isn't running the update.zip file...
UPD: When i load rom manager and try to reboot into recovery, it says the application superuser permissions has stopped unexpectedly and keeps force closing now....titanium backup wont run now either, my root permissions seem whacked after going back to eclair?
UPD2: I followed instructions to unroot and reroot here: http://forum.xda-developers.com/showthread.php?t=739300
It removed superuser, then added it back again, but I still get the unexpected error and it appears my root is not in place. I am back to eclair, and now need a certain way to get my root fixed, so I can try and flash CWM recovery. Without root working, it is not letting me. My wife hates me now for doing this to her phone, so those of you that are married, I would appreciate your assistance to get back on her good side...before Mother's day...please? =)
Ok, thanks for all the help, however, I am really back where I started. I can only get stock recovery, and for the life of me, cannot get CW recovery to load. I used ODIN to go back to eclair on the vibrant, have a good root on the phone now, and no matter how many times i reinstall packages i cannot get clockworkmod recovery to load, ever. Any more thoughts out there?
I had this trouble a few months back. Things to check before going into recovery:
You gotta have root access.
Make sure you have debugging on
Install busybox FIRST
Try uninstalling Rom manager and reinstalling the latest version.
apply the recovery for vibrant and let it boot into recovery.
When it boots into recovery Don't try to install packages yet. Just reboot.
Look here for the files:
http://forum.xda-developers.com/showthread.php?t=833423&highlight=3e+recovery
When it boots up push the update.zip to the sd card on the phone, not the external card.
Run the script and it should reboot back into recovery.
You should now be able to install packages.
This way has always worked for me.
starkiller86 said:
I had this trouble a few months back. Things to check before going into recovery:
You gotta have root access.
Make sure you have debugging on
Install busybox FIRST
Try uninstalling Rom manager and reinstalling the latest version.
apply the recovery for vibrant and let it boot into recovery.
When it boots into recovery Don't try to install packages yet. Just reboot.
Look here for the files:
http://forum.xda-developers.com/showthread.php?t=833423&highlight=3e+recovery
When it boots up push the update.zip to the sd card on the phone, not the external card.
Run the script and it should reboot back into recovery.
You should now be able to install packages.
This way has always worked for me.
Click to expand...
Click to collapse
thanks...It is rooted, but not sure about busybox...the stock recovery is 2e now since I went back to eclair, so not sure i should follow that link as it talks about modifying 3e and making it backwards compatable. I did use that process before I went back to eclair, and it didn't work for me. I have uninstalled rom manager, and reinstalled...and it is different in that it shows a flashed recovery 2.5.1.2, and never asks me for my phone type anymore...it used to ask me and i had to select vibrant....is the recovery supposed to be 2.5.1.2? when I show all recoveries it lists .1, .2, .3, .4 so wondering if I should use .3 or .4...why does it stay at .2?
starkiller86 said:
I had this trouble a few months back. Things to check before going into recovery:
You gotta have root access.
Make sure you have debugging on
Install busybox FIRST
Try uninstalling Rom manager and reinstalling the latest version.
apply the recovery for vibrant and let it boot into recovery.
When it boots into recovery Don't try to install packages yet. Just reboot.
Look here for the files:
http://forum.xda-developers.com/showthread.php?t=833423&highlight=3e+recovery
When it boots up push the update.zip to the sd card on the phone, not the external card.
Run the script and it should reboot back into recovery.
You should now be able to install packages.
This way has always worked for me.
Click to expand...
Click to collapse
OK>>> I GOT IT... Thanks to everyone who helped...Here is what was needed:
1) Install ODIN, install back to eclair
2) uninstall ROM Manager, reinstall
3) I needed to select the 2.5.1.2 recovery from the list again (this was important as it somehow knew of the previous load, but files were missing, or something was just wrong.) It finally loaded properly, and asked for phone type again, so selected vibrant
4) I rebooted into recovery, and instead of install packages, i rebooted once, as starkiller suggested
5) After reboot, went back into recovery from rom manager, and this time installed updates, and it showed that it replaced the recovery with CWM.
6) It rebooted into stock recovery however, so I once again selected install updates, and it went right into CWM recovery, and now I am flashing happy!!!
Thanks again everyone...this was soooooo different than my mytouch4g!
If you have the Kies update of Froyo, the 3e mod will sometimes not work. I've gotten to CWM though , but its best to downgrade then flash a ROM from there.
I just wanted to bump this thread because it really helped me.
I've messed around with numerous android phones, and I've never had thie issues I've had with this phone getting into recovery to flash ROMs
Thank you!
I've read the whole cwm main posts, and so I kinda understand what cwm backup is, so heres a few quick questions on cwm (I'm sorry I'm still new to this stuff)
1.Does CWM backup everything?
like the state of apps to firmware version and eveything?
if not, please tell me what it backsup.
2.I've downloaded the CWM via Rom Manager 4.3.3.0, did recovery, and tried a backup, and,
it turns off, and the android dude under a big exclaimation mark is all I see, and it's stuck on it::So I yanked the battery out, and rebooted it(it the power button), and it, well, fine, so far. Tried again, stuck again, so, is there a solution on this??
ATT, 4.1.83, Rooted via Gingerbreak, Locked bootloader
1. Nandroid is full system backup, it backups everything, its a copy of your system.
2. I think this recovery is for bootloader unlocked phone only .
You need to use this recovery: http://forum.xda-developers.com/showthread.php?t=1019143
Guide to install it : http://briefmobile.com/atrix-4g-rom-installation-guide (Part Three – Tenfar’s CWM Recovery)
BTW, after you backup everything, go ahead and move to GingerBread.
Great guide over here: http://forum.xda-developers.com/showthread.php?t=1154600
ofek said:
2. I think this recovery is for bootloader unlocked phone only.
Click to expand...
Click to collapse
OP, if you haven't unlocked your Atrix yet then ROM manager wouldn't have been able to install CWM Recovery.
ofek said:
You need to use this recovery: http://forum.xda-developers.com/showthread.php?t=1019143
Click to expand...
Click to collapse
OP, the CWM Recovery installed by ROM Manager doesn't quite work right with the Atrix. Which means that you can't really use ROM Manager on the Atrix right now, since almost everything it wants to do requires that you first install its own recovery.
So you'll need to use a slightly different version of the CWM Recovery created by member tenfar. FYI, the newest version is posted here:
http://forum.xda-developers.com/showthread.php?t=1138541
P.S. Here's the easiest way to unlock your phone, install Tenfar's CWM Recovery, and install su for root access: http://forum.xda-developers.com/showthread.php?t=1182871
P.P.S. Based on your description, it sounds like you're booting into the stock Android Recovery. To get past the icons, try one or the other of these two methods (based on your firmware version):
Pre-4.5.91: Hold the phone in your hands in portrait mode (i.e. not laying on a flat surface). Touch the lower right-hand corner of the screen several times until you find the "sweet spot". One you get past this point you'll see that there are touch-buttons in both lower corners of the screen. To accept an item in the menu you will need to touch the button in the lower left-hand corner of the screen. However, there's a bug in this version of Android Recovery which requires you to rotate the screen to LANDSCAPE mode before touching the button. Which means that once the phone is rotated you will be touching the lower right-hand corner of the screen...
4.5.91: I'm told that pressing both the Volume Up and Volume Down buttons simultaneously will get you into the Android Recovery, but I was never able to get this to work. I just unlocked my phone and installed Tenfar's CWM Recovery instead. There are no problems with navigating his recovery.
AndyPhreak said:
OP, the CWM Recovery installed by ROM Manager doesn't quite work right with the Atrix. Which means that you can't really use ROM Manager on the Atrix right now, since almost everything it wants to do requires that you first install its own recovery.
So you'll need to use a slightly different version of the CWM Recovery created by member tenfar. FYI, the newest version is posted here:
http://forum.xda-developers.com/showthread.php?t=1138541
Click to expand...
Click to collapse
Updating the thread to say... at this point the recommended Atrix recovery is romracer's version, posted here:
http://forum.xda-developers.com/showthread.php?t=1204500
romracer is actively maintaining this version, which does work correctly with ROM Manger (assuming that you install ROM manager first, and then use it to install romracer's recovery). Also, this latest recovery correctly handles backups and restores to/from both the internal storage and the external SD card.
I am running 2.2.2 Froyo with 1.77 build.
I unlocked and rooted via Gingerbreak.
I went into CWM Recovery, erased all cache and flashed Alien Rom v3 and immediately flashed the Alien theme over it (I think that is where I made my booboo). The Rom appeared to load perfectly yet when the phone restarted the Moto logo animation appeared to run then the screen would go dark. This process repeats every few seconds non stop.
I can get into Android Recovery, RSD, everything. I tried flashing the 1.8.3 sbf through RS Lite 5.3.1 and while it said "PASS" it still hangs at the Moto animation.
I have no idea what to do. I think I can get out of it as I have done A LOT of searching through the forums and google but I am terrible with CMD.
Any helpful and/or useful advice?
Try restoring a backup, if not try to flash a fruitcake
http://forum.xda-developers.com/showthread.php?t=1163009
Sent from my MB860 using XDA App
Thanks for the thread. However it looks like I need CWM Recovery in order to flash a fruitcake? I cant get the phone to boot past animation so this wont work...
Also I didnt create backups
noxlo said:
Thanks for the thread. However it looks like I need CWM Recovery in order to flash a fruitcake? I cant get the phone to boot past animation so this wont work...
Also I didnt create backups
Click to expand...
Click to collapse
Are you unlocked and flashed cwm through fastboot, or did you use the system recovery app?
Sent from my MB860 using XDA App
System recovery app. I can access Androids recovery (obviously) but not many options...
Did you unlock your bootloader?
I ran into the same issue the first time I tried to flash Alien. Since you're flashing Alien, I assume your bootloader is unlocked (As it's required for Alien).
If you have an unlocked bootloader, do this:
EDITED: Apparently, I'm a new user and can't post links. Go to the address bar and replace the number with 1163342
Use Fastboot to flash the boot.img and the system.img files. This will give you Gingerbread/Motoblur like it comes out of the box. (It's a start!)
Thanks for the link. Will try when I get home. If I can just get past cmd...
Ok so before my Atrix was stock on Gingerbread 2.3.4 OTA update. I then sbf flashed the pudding ROM, and it flashed correctly but my Atrix said boot error 0X1000 and that it detected no OS. It gave me the options regularly seen on the boot screen (including recovery, bp bypass nv flash, etc). To remedy this I did fast boot oem unlock and then fast boot reboot. The phone was unlocked, and at first it was stuck on the dual core screen, but on second boot it booted into the new ROM. I then flashed a custom recovery (tenfar's) and installed the pre release CM7 ROM. I'm now rooted and unlocked running CM7. My question is, do I ever need to use sbf flash again or can I always just install through my custom clockwork mod recovery. Also, when I do install a ROM through cwm recovery, is it just like sbf flash, as in does it overwrite all previous data and I'm starting fresh with my new ROM (after cache and data wipes of course)? And if I ever do sbf flash to something higher than 1.8.3 (my fuse has already been burned since I did the OTA to 2.3.4, will it be safe)?
Lastly, an important question I need to ask pertains to the cwm recovery. Whenever I try to use a function on ROM Manager, it says I need to flash clockwork mod recovery, even though I already have Tenfar's cwm recovery flashed into my phone. Is it safe to flash cwm recovery that ROM Manager is asking me to flash even while I have Tenfar's custom recovery flashed on my phone?
Yes, threw cwm a full rom if you wipe all your data, it will be like a fresh install.
But it won't erase recovery or mess with bootloader
You can skip flash sbf's by using cwm zips, since every custom rom is in cwm and none in sbf.
If you update to a higher who knows?
You are already in gb. The sure if you downgrade with ota sbf you will hard brick!
In an upgrade, mmm let's say ICS, as they promised to unlock the BP, may they finally do it..
If they dont, or its not safe etc,
Don't worry . Devs will make again a safe cwm zip.
For rom manager.
Yes, it is safe, but..
It doesn't support sdcard-ext.. Only the internal.. So stay with tenfars or with the new one, of another guy in dev section.
ofcourse you can install eg rom managers recovery, and after that install using fastboot tenfars or the other one..
Its safe. If you know what you are doing.
One recovery will be installed each time..
Its up too you..
BlackKnight12 said:
Ok so before my Atrix was stock on Gingerbread 2.3.4 OTA update. I then sbf flashed the pudding ROM, and it flashed correctly but my Atrix said boot error 0X1000 and that it detected no OS. It gave me the options regularly seen on the boot screen (including recovery, bp bypass nv flash, etc). To remedy this I did fast boot oem unlock and then fast boot reboot. The phone was unlocked, and at first it was stuck on the dual core screen, but on second boot it booted into the new ROM. I then flashed a custom recovery (tenfar's) and installed the pre release CM7 ROM. I'm now rooted and unlocked running CM7. My question is, do I ever need to use sbf flash again or can I always just install through my custom clockwork mod recovery. Also, when I do install a ROM through cwm recovery, is it just like sbf flash, as in does it overwrite all previous data and I'm starting fresh with my new ROM (after cache and data wipes of course)? And if I ever do sbf flash to something higher than 1.8.3 (my fuse has already been burned since I did the OTA to 2.3.4, will it be safe)?
Lastly, an important question I need to ask pertains to the cwm recovery. Whenever I try to use a function on ROM Manager, it says I need to flash clockwork mod recovery, even though I already have Tenfar's cwm recovery flashed into my phone. Is it safe to flash cwm recovery that ROM Manager is asking me to flash even while I have Tenfar's custom recovery flashed on my phone?
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
Danger!
To be honest...
you can use clockworkmod and take advantage of your unlocked bootloader, but the second that you brick (soft/hard) your device, you are in trouble. You wont be able to reflash it back to stock because the only SBFs that exist are for 4.5.57, and 4.5.52. Reflashing either of these downgrades WILL BREAK YOUR DEVICE FOR GOOD.
If you are lucky, you might be able to use fastboot to restore stock images, but if I were you, I would head on over to:
direct.motorola.com/hellomoto/motosupport/source/softwareupdate.asp
and use the update software to return your phone to factory ROM. With an OTA updated Atrix, there is too much chance that your phone will be rendered useless.
Do what you wish, but be mindful of the consequences.
This is all very confusing. There is a 4.5.91 SBF. It isn't a downgrade. It should only be flashed as a last resort though. It will remove the word "unlocked" from your boot screen, but it can't un-burn the fuse.
The far safer option is to use CWM for everything. This is the recommended approach.
Sent from my Alienated Atrix
As to your CWM question, I believe romracer's CWM is the new standard. I thought the CM7 instructions even said to use it to install CM7.
Sent from my Alienated Atrix
Hello all I am new to this whole rooting process... I am not afraid to admit it as we all were once new at what we are doing at some point. I need help creating a nandroid back up on my atrix. O have successfully unlocked the boot loader and rooted my phone. I performed a backup using cwm through the boot screen and then I proceeded to wipe all my data and install a new rom when to my surprise it got stuck on the boot load screen for 30minites before I pulled the battery and tried restoring to my backup that I made with cwm.. it appears that the backup only successfully installed the boatload.img file and none of the other. Img files therefore once rebooted my phone would stay stuck at the boatload screen... I finally wiped everything and found a gingerbread 2.3.4 version 4.5 beta and copied it to my external sd card and installed it through cwm choosing the zip file to install and rebooting. Now I am back up and running but I do obviously not know how to make a nandroid backup so if I decide to tinker around with my phone again I will not have the same problem as before. Any help would be greatly appreciated... I am sorry this is so long bit if someone helps me I would rather they know the whole story then just portions of it. Thanks everyone who reads this and replies!!!
Sent from my MB860 using XDA App
Mphill46 said:
Hello all I am new to this whole rooting process... I am not afraid to admit it as we all were once new at what we are doing at some point. I need help creating a nandroid back up on my atrix. O have successfully unlocked the boot loader and rooted my phone. I performed a backup using cwm through the boot screen and then I proceeded to wipe all my data and install a new rom when to my surprise it got stuck on the boot load screen for 30minites before I pulled the battery and tried restoring to my backup that I made with cwm.. it appears that the backup only successfully installed the boatload.img file and none of the other. Img files therefore once rebooted my phone would stay stuck at the boatload screen... I finally wiped everything and found a gingerbread 2.3.4 version 4.5 beta and copied it to my external sd card and installed it through cwm choosing the zip file to install and rebooting. Now I am back up and running but I do obviously not know how to make a nandroid backup so if I decide to tinker around with my phone again I will not have the same problem as before. Any help would be greatly appreciated... I am sorry this is so long bit if someone helps me I would rather they know the whole story then just portions of it. Thanks everyone who reads this and replies!!!
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
try RomRacer's CWM Recovery in the development forum instead.
Thanks I will look into that! Thanks for your response.
Sent from my MB860 using XDA App
Looked into rom racer's forum page still confused
Hello again, I have looked into the forum for "romracer" and there is still quite a bit of confusion on my side (noob). I am already nervous about flashing things to my phone since my last stuck in boot loading screen. My current version of cwm is whatever came with option number 2 on the automatic unlock file that unlocked my bootloader and also provided root access. I believe it is called "Tenfar CWM". I want to be able to make a successful nandroid backup and I am understanding that I need to flash the latest version of CWM for atrix. I am confused about how I go about flashing that onto my phone safely. I am sorry I am such a noob, but I want to understand how to get the latest version of CWM for atrix onto my phone... There are so many links to different things on the developer for CWM forum page that my mind is spinning out of control. Any help on where to download all the necessary files to perform this flash and how to flash my phone with the latest version of CWM for atrix 4G would be greatly appreciated. Thanks for being understanding and helping me through this process that seems overwhelming for a noob like me.
Thanks,
A fellow Atrix 4G owner who switched from iPhone to have the freedom to change what I want
Mphill46 said:
Hello again, I have looked into the forum for "romracer" and there is still quite a bit of confusion on my side (noob). I am already nervous about flashing things to my phone since my last stuck in boot loading screen. My current version of cwm is whatever came with option number 2 on the automatic unlock file that unlocked my bootloader and also provided root access. I believe it is called "Tenfar CWM". I want to be able to make a successful nandroid backup and I am understanding that I need to flash the latest version of CWM for atrix. I am confused about how I go about flashing that onto my phone safely. I am sorry I am such a noob, but I want to understand how to get the latest version of CWM for atrix onto my phone... There are so many links to different things on the developer for CWM forum page that my mind is spinning out of control. Any help on where to download all the necessary files to perform this flash and how to flash my phone with the latest version of CWM for atrix 4G would be greatly appreciated. Thanks for being understanding and helping me through this process that seems overwhelming for a noob like me.
Thanks,
A fellow Atrix 4G owner who switched from iPhone to have the freedom to change what I want
Click to expand...
Click to collapse
1) Go to /system/etc. and delete "install-recovery.sh". This can be done with Root Explorer, available from the market. If it's not there, then don't worry about it.
2) Download which every color of Rom Racer's CWM you want to your pc (same folder as fastboot files).
3) Boot into fastboot mode and enter fastboot mode.
4) Connect phone to pc, and open command prompt from fastboot folder (shift + right click -> open command window here).
5) Enter fastboot commands from Rom Racer's OP.
6) Enter "fastboot reboot" to reboot phone.
7) Boot into recovery and make sure it worked
*If you still see Tenfar's recovery app on your phone, delete it like you do any other app.
OR
1) Delete Tenfar's Recovery app.
2) Go to /system/etc. and delete "install-recovery.sh". This can be done with Root Explorer, available from the market. If it's not there, then don't worry about it.
3) Download ROM Manager from the market (free)
4) Install the CWM Recovery for the Atrix via the ROM Manager App.
5) Use this CWM Recovery
or proceed to install ROM Racer's CWM Recovery...
6) Download ROM Racer's CWM and put it on your internal SD card (/sd-card).
7) Open ROM Manger App
8) Select install ROM from .zip (or something like that - one of the main options).
9) Select the .zip you put there, an uncheck the options (no need to wipe anything).
10) Phone will reboot, install the .zip, and reboot again.
11) Should have ROM Racer's version on the phone now, and be able to enter recovery via the ROM Manager App.
Thank you so much... I will try that once I have some time to dedicate strictly to this...
Sent from my MB860 using XDA App