Hello,
Was wondering I'm not too technical minded with phones but can the ram of a x10i b upgraded from 512mb to higher like 1024mb and up?
Sent from my X10i using XDA
dunc4n88 said:
Hello,
Was wondering I'm not too technical minded with phones but can the ram of a x10i b upgraded from 512mb to higher like 1024mb and up?
Sent from my X10i using XDA
Click to expand...
Click to collapse
The ram is an onboard chip, no upgrades. :-( It does have a Sd card slot that can hold up to a 32Gb card.
XPERIA X10a, Wolfbreak Edition 6s, DoomKernel 5a @ 1.2Ghz
Cheers for the reply, was just a question as I'm using doomlords v6 full OC kernel running at 1.2ghz and was wanting more ram to compensate the OC of the CPU so the CPU could run at its full potential OC just as you would with a computer
Sent from my X10i using XDA
dunc4n88 said:
Cheers for the reply, was just a question as I'm using doomlords v6 full OC kernel running at 1.2ghz and was wanting more ram to compensate the OC of the CPU so the CPU could run at its full potential OC just as you would with a computer
Sent from my X10i using XDA
Click to expand...
Click to collapse
If you dig around you May find Data2SD. It is a flashable zip file to move the pagefile to your SD card. If you have fast card it may help free up space. I was using it before unlocked bootloader so not sure if helps with oc kernel.
XPERIA X10a, Wolfbreak Edition 6s, DoomKernel 5a @ 1.2Ghz
Thanks for that ill have a look about and see what it does
Sent from my X10i using XDA
Related
Please let us know how to overclock to 800mhz at 2.1
Sent from my E10i using XDA App
Please tell me how
Sent from my E10i using XDA App
I want to speed quickly fpse game
Sent from my E10i using XDA App
triple post ...
you will fry eggs at 800MHz ...
Go to doixahn thread in X8 section ... here
NEVER try more than 768MHz
710 is better.
Read carefully please
If you break your device after any test (if burn it for example) nobody will help you.
thank you
Sent from my E10i using XDA App
if we _could_ go over 800MHz without deep frying our devices, then every custom rom would have a version with this overclock. i dont think devs are stupid
It can be clocked up to 825 MHz ?
Or have I missed something?
Snusdus said:
It can be clocked up to 825 MHz ?
Or have I missed something?
Click to expand...
Click to collapse
you can virtualy overclock at 825 ... in the best case your phone will reboot
in the worst ... it will burn
our mini is too small and the heat won't go off ^^ it will become hotter and hotter
put it in the fridge and test that
(i won't try though )
You can't, anything higher than 748 will most likely cause the phone to reboot, and that's the best case scenario.
psx4droid requires that you have 600mhz +, I think if you overclock to 650mhz it should work just fine as long as you are not running high end games like driver 2.
It wont burn.. My phone has been 825 for 5 days without getting hotter then before
Sent from my U20i using Tapatalk
Snusdus said:
It wont burn.. My phone has been 825 for 5 days without getting hotter then before
Sent from my U20i using Tapatalk
Click to expand...
Click to collapse
How did you get it to run at 825?
Don't ask. Thats insane.
Snusdus said:
It wont burn.. My phone has been 825 for 5 days without getting hotter then before
Sent from my U20i using Tapatalk
Click to expand...
Click to collapse
you're using a mini PRO the mini (e10i) CAN'T be overclocked so higher
deeplyshocked said:
Please let us know how to overclock to 800mhz at 2.1
Sent from my E10i using XDA App
Click to expand...
Click to collapse
use No-frills CPU control download it from market it works good.
my max overclock is 787 mhz U20i phone its reboot above that
There is finally a way to overclock this thing with stock rom!! It supports at max 1.3GHz which runs very fast and still manages to have very good battery life(Also requires root permissions)
azoller1 said:
There is finally a way to overclock this thing with stock rom!! It supports at max 1.3GHz which runs very fast and still manages to have very good battery life(Also requires root permissions)
Click to expand...
Click to collapse
I know with the ultimate version you can clock up to 2GHz and adjust voltage... does the "max 1.3GHz" mean this wouldn't actually do anything if clocked to say... 1.5GHz?
ZaIINN said:
I know with the ultimate version you can clock up to 2GHz and adjust voltage... does the "max 1.3GHz" mean this wouldn't actually do anything if clocked to say... 1.5GHz?
Click to expand...
Click to collapse
Well in the free version the Max is 1.3ghz but in the full it would probably work at 1.5ghz or 2.0ghz(that would be super fast) but not sure how safe it would be, it may work good on one device but not on the other, if you have the ultimate version you should try it out and see what works and doesn't(I don't have the full version but now I want it!!!)
Cool
Sent from my R800i using xda premium
Can someone upload the ultimate apk?
Sent from my GT-i9000 using XDA App
Jayydude_SGP said:
Can someone upload the ultimate apk?
Sent from my GT-i9000 using XDA App
Click to expand...
Click to collapse
Even if someone did upload ultimate, it does a license check. Besides, I don't think XDA wants to support illegal downloads.
Can't you just buy it?
Sent from my YP-G70
Oh okay.
Sent from my GT-i9000 using XDA App
very nice, thank you for this post
working great on SGP 5.0
great thank you
Would this work on a Galaxy Wifi S 5.0 running 2.2.2 Froyo?
Looks like there are some questions about Froyo support.
Thanks.
1.6ghz it's the max you can go, I've tested it and it appears stable.
Sent from my YP-G70 using xda premium
Bluemgt06 said:
1.6ghz it's the max you can go, I've tested it and it appears stable.
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
How did you get 1.6 Ghz? When i download tegrak overclock it give me upto 1.3 Ghz.
gskillivenom said:
How did you get 1.6 Ghz? When i download tegrak overclock it give me upto 1.3 Ghz.
Click to expand...
Click to collapse
he is using the premium version which supports up to 2.0GHz
Yes I'm using the premium version. The settings for that is (frequency, core voltage, internal voltage)
1600mhz, 1360mV, 1160mV
1200mhz, 1300mV, 1120mV
800mhz, 1200mV, 1100mV
400mhz, 1050mV, 1100mV
200mhz, 950mV, 1100mV
100mhz, 950mV, 1000mV
(I got these values from another post, can't find it at the moment, use at your own risk) I have attempted to go higher but all I got was about 50mhz more before becoming unstable. The app does let you go to 2 ghz but it doesn't work on the galaxy player, I tried but the screen blurs and the device freezes.
Sent from my YP-G70 using xda premium
it hangs no response..
Sent from my YP-G1 using xda premium
Im using tegrak oc free app and the max oc i can get is 1.3 ghz is ther eany another free app that does more than 1.3 ghz oc?
Sent from my YP-G70 using xda premium
kfirbep said:
Im using tegrak oc free app and the max oc i can get is 1.3 ghz is ther eany another free app that does more than 1.3 ghz oc?
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
No. Just purchase the pro version of Tegrak, I did it and it was well worth it to use the 1.5GHz profile.
The $/performance ratio is well in balance with Tegrak if your a risky OC'er like me.
Yeah, the full version of Tegrak is totally worth the $2 or whatever.
I've been rocking 1.5ghz and it's been awesome. It could probably go beyond that but I'm a little scared to push it. The ICS roms don't work with tegrak for me - I don't know if it's my device or if it's an issue but I've gone back to gingerbread just so I can keep the 1.5ghz.
And yes, the jump from 1.3ghz to 1.5ghz is worth it. The difference in speed for me was almost equal to the first time I OC'd to 1.3. VERY noticible, quite safe at this point IMO.
Hi guys, I'm trying to overclock my lww and I've been running some benchmarks to see the results. I'm concerned about the temperature - I don't know much about mobile overclocking and my question is what temperature is safe for my phone ? Currently I'm running stability test - cpu and gpu testing on 1.6ghz and the peak temperature is 38 degrees. What can you tell me about it ?
I'm not sure if the LWW has an SoC with a CPU thermal sensor.. Its probably the battery temperature.. Even so.. anything below 40-45 degrees should be just fine.. Phone should reboot on overheating I guess.. Most phones heat up anyways on charging so you should be ok.. As always overclocking will reduce battery life.. so will constant higher system temperature..
Thanks for the reply. So i guess 1.4 should be just fine for mainstream overclocking :fingers-crossed:
I even heat up at 1.3 kamarush.now 1.2 stable minicmlite4
Sent from my WT19i using xda premium
Somyab said:
I even heat up at 1.3 kamarush.now 1.2 stable minicmlite4
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
I'm using KRsH Kernel v3.0 ICS with MiniCMSandwich Lite Final v4 AOSP. Pretty good I would say. You mus tweak it a little bit for best performance.
You can overclock upto 1.9 GHz using rage kernel. But it seems very heavy on battery. My advice Is upto ~1.4Ghz .. Temp. Is max upto 38 on heavy usage.
Sent from my WT19i using xda app-developers app
rachit.rc96 said:
You can overclock upto 1.9 GHz using rage kernel. But it seems very heavy on battery. My advice Is upto ~1.4Ghz .. Temp. Is max upto 38 on heavy usage.
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
with KRsH Kernel the limit is 2ghz Thanks for the advice.
omegastarr said:
Hi guys, I'm trying to overclock my lww and I've been running some benchmarks to see the results. I'm concerned about the temperature - I don't know much about mobile overclocking and my question is what temperature is safe for my phone ? Currently I'm running stability test - cpu and gpu testing on 1.6ghz and the peak temperature is 38 degrees. What can you tell me about it ?
Click to expand...
Click to collapse
Cool. Here i do OC Every Day For Gamer . Max 1.5 about min 460 . I never don't problem with OC
What's your 3d score in antutu?? Mine is 1150 1ghz,gb stock rooted
Sent from my LT15i using xda app-developers app
prithvim7 said:
What's your 3d score in antutu?? Mine is 1150 1ghz,gb stock rooted
Sent from my LT15i using xda app-developers app
Click to expand...
Click to collapse
1179 points. LWW ICS with new Adreno drivers. Seems that ICS its now comparable to GB.
Do u have those new ardeno drivers?? If so can it be installed through CWM?
Sent from my LT15i using xda app-developers app
I installed the new drivers and things got worse.. I had to reinstall the rom.. I think it depends on which rom you're using and what drivers it has..
Anyone know risks of using CPU overclocking
Xperia ray have 1Ghz processor.
I think My kernel sets 800mhz.
Now i changed to 1Ghz using setcpu app.
Any problem?
Frying the cpu itself because of overheating.
riyasopr said:
Anyone know risks of using CPU overclocking
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Higher battery drain
Overheating... Sometimes in extreme scenario can burn your phone...
I
Sent from my ST15i with a wide CRACK running down the screen
In my xperia ray. I use xkernel and miui. In about phone it shows CPU:800MHz. I think ray have 1GHz processor. I installed setcpu. Then I set to 1117 now about phone 1Ghz . Any problem?
Sent from my SK17i using xda premium
It will slowly reduce ur cpu lifespan. Its better to set to default freq for daily use.
Sent from my Nokia 3310 using Tapatalk 2
might cause subtle misbehaviour of applications. If you are out of luck corrupted files or corrupted filesystems.
riyasopr said:
Anyone know risks of using CPU overclocking
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Turns your phone into a heater if you do it right!
Coming from a guy who set his unmodified 1Ghz ST15i to 1.8Ghz and burned his hand with it after a while.
Take care and remember to apply caution where necessary!
Xperia ray have 1Ghz processor.
I think My kernel sets 800mhz.
Now i changed to 1Ghz using setcpu app.
Any problem?
Sent from my SK17i using xda premium
riyasopr said:
Xperia ray have 1Ghz processor.
I think My kernel sets 800mhz.
Now i changed to 1Ghz using setcpu app.
Any problem?
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
I think no problem there.
Sent from my Nokia 3310 using Tapatalk 2
Thanks for reply
To all
Sent from my ST18i using xda app-developers app
is overclocking to 1200 mhz safe or dangerous ?
Sparksys said:
is overclocking to 1200 mhz safe or dangerous ?
Click to expand...
Click to collapse
No harm in overclocking upto 1.4 ghz...
But at 1.6 ghz or above the phone overheats
Sent via Smultron
is it risky to under volt a overclokd device... NY one tried it
suael said:
is it risky to under volt a overclokd device... NY one tried it
Click to expand...
Click to collapse
of course if you don;'t do it properly..
You ll get bootloops for sure
Why do u need undervolting.. Its really useless may be an hour u could extend Thats all....
Stock voltages are best:fingers-crossed:
PREDATOR95 said:
No harm in overclocking upto 1.4 ghz...
But at 1.6 ghz or above the phone overheats
Sent via Smultron
Click to expand...
Click to collapse
Great to know this, I overclocked my xperia mini pro to 1.2ghz and I was wondering if its still safe to overclock to 1.4ghz.
thx for information!
I clocked my phone to 1.5 and it's perfect for everyday use.Now that the cold months come it would be even better, not that I felt more heating though.. I still get a 2-day battery time thanks to the power saving options of the kernel and the rom.
Which is the best method to overclock.
Setcpu app is safe or danger?
I used the ROM Control in the settings menu.
Rom control not available in stock rom
Sent from my ST18i using xda app-developers app