Hi again!
I try to update my device firmware from 3.2.8 to 4.0.5 but every time I updated it a message appear that say "Android is upgrading, Starting Applications..." but nothing happened after 10 minutes...
What can I do? Anybody have same problem?
PS: My computer during update can not install "MTP usb device" driver!
Masih60 said:
Hi again!
I try to update my device firmware from 3.2.8 to 4.0.5 but every time I updated it a message appear that say "Android is upgrading, Starting Applications..." but nothing happened after 10 minutes...
What can I do? Anybody have same problem?
PS: My computer during update can not install "MTP usb device" driver!
Click to expand...
Click to collapse
Hi!
Let me explain ! you will lose everything on the tablet but not on the sdcard !
Press power for 10 sec. until the green light closed ....now while press volume down prese again power ( and do not release ) until you will see SDE menu (recovery)!
Here you need to choose Format System-> Reformat Device -> I understood -> ok !....and wait a while....until a new driver appear on your PC , now copy here firmware_archos_it4.aos ( Firmware 4.0.5) and -> OK! That's all ! Now you will have installed ICS 4.0.5 ! Good luck .
surdu_petru said:
Hi!
Let me explain ! you will lose everything on the tablet but not on the sdcard !
Press power for 10 sec. until the green light closed ....now while press volume down prese again power ( and do not release ) until you will see SDE menu (recovery)!
Here you need to choose Format System-> Reformat Device -> I understood -> ok !....and wait a while....until a new driver appear on your PC , now copy here firmware_archos_it4.aos ( Firmware 4.0.5) and -> OK! That's all ! Now you will have installed ICS 4.0.5 ! Good luck .
Click to expand...
Click to collapse
I'm still have problem! I do everything you told me but after rebooting my device, welcome screen appear and nothing happen after 20 minute!
Isn't Pertain to MTP usb device?
Masih60 said:
I'm still have problem! I do everything you told me but after rebooting my device, welcome screen appear and nothing happen after 20 minute!
Isn't Pertain to MTP usb device?
Click to expand...
Click to collapse
HI !
I think you do something wrong!
Please RE-download firmware_archos_it4.aos ...may be is corupted ...and try again ! and attantion, after copy firmware_archos_it4.aos into device , please leave USB cable ( disconnect the cable USB ) !
For install original archos ICS 4.0.5 file you need not necessarily to install MTP usb driver into your PC !
Related
i downloaded the Uruikdroid 1 to install my 3G USB dongle on Archos 101, but the operation failed, then i tried to remove this software and clean up my Archos to its default settings but i got stuck
every time i open my Archos shows me white screen with title: Archos A101IT Recovery
No
Reboot
Update Firmware
Repair System
Format System
i tried every choice but nothing happen, the same white screen
i tried to connect it to my PC with USB connection but nothing happened too :-((
plz help me , plz
Click on "update firmware" and plug the USB cable in, when you can access the storage, copy this file into the archos. http://update.archos.com/8/gen8/gen8_2.3.26/firmware_archos_android_gen8.aos
thx marclh very much , really u made my day
update failed
internalspirit said:
thx marclh very much , really u made my day
Click to expand...
Click to collapse
I tried this several times, when I copy and paste the update file into the 101it via usb cable to my laptop, nothing happens, how do I open the program file in order to paste the new update onto the tablet???
jeanuhlik said:
I tried this several times, when I copy and paste the update file into the 101it via usb cable to my laptop, nothing happens, how do I open the program file in order to paste the new update onto the tablet???
Click to expand...
Click to collapse
Try to redownload the firmware, corrupted file can be the cause of update failure. Also be sure to safely remove the device before starting the update.
You know how to get into recovery to update the firmware? Hold down the volume down button while starting your device. After a while a white screen should appear with your recovery menu. When that happens let go of the volume down button. Navigate with volume down-up and power to select.
divx118
I have a xperia S and I'm trying to install CM10 on it, but I just cant unlock my bootloader. Every time I enter on fastboot mode, the phone restarts, and I dont succed trying to install the usb drivers because the phone restarts and the pc says "the windows could not find the driver software for the device. I was using ICS 4.0.4 but I downgrade to GB thinking the problem is the rom. =/
please help me, I really need CM10
conanjf said:
I have a xperia S and I'm trying to install CM10 on it, but I just cant unlock my bootloader. Every time I enter on fastboot mode, the phone restarts, and I dont succed trying to install the usb drivers because the phone restarts and the pc says "the windows could not find the driver software for the device. I was using ICS 4.0.4 but I downgrade to GB thinking the problem is the rom. =/
please help me, I really need CM10
Click to expand...
Click to collapse
what you gotta do is this..
download http://www.mediafire.com/?lt8ghch95u5abgo
If you open it, there are 2 zip files.
1. open drivers.zip
2. extract it somewhere
3. open device manager (or whatever it's called in English windows)
4. connect your Xperia S in fastboot mode (volume up and plug in USB)
5. in less them 3 seconds, hit right button on S1(something device with exclamation mark)
6. select "update drivers"
7. select somewhere\x64\usbwin folder
8. hit ok.
at this time your Xperia S will be allready out of fastboot mode.
9. wait for windows to install drivers
10. wait another couple of seconds, and plug Xperia S in fastboot mode again
If I've helped you, hit the thanks button
Harsh7689 said:
what you gotta do is this..
download http://www.mediafire.com/?lt8ghch95u5abgo
If you open it, there are 2 zip files.
1. open drivers.zip
2. extract it somewhere
3. open device manager (or whatever it's called in English windows)
4. connect your Xperia S in fastboot mode (volume up and plug in USB)
5. in less them 3 seconds, hit right button on S1(something device with exclamation mark)
6. select "update drivers"
7. select somewhere\x64\usbwin folder
8. hit ok.
at this time your Xperia S will be allready out of fastboot mode.
9. wait for windows to install drivers
10. wait another couple of seconds, and plug Xperia S in fastboot mode again
If I've helped you, hit the thanks button
Click to expand...
Click to collapse
I did this a lot of times, but the pc says, windows could not find the drivers and immediately the phone restarts to charging mode =/
How can it be ??
Do 1 thing, keep your device manager opened, connect the phone in FASTBOOT mode and as soon as the Driver icon appears, update driver manually !! It's okay if the phones disconnects.. Once the drivers are installed, connect the phone again..
Harsh7689 said:
How can it be ??
Do 1 thing, keep your device manager opened, connect the phone in FASTBOOT mode and as soon as the Driver icon appears, update driver manually !! It's okay if the phones disconnects.. Once the drivers are installed, connect the phone again..
Click to expand...
Click to collapse
PC says: Windows could not find the driver software. And nothing happens =/ See the print
READ what i have written properly..!!
Harsh7689 said:
READ what i have written properly..!!
Click to expand...
Click to collapse
I did man! But the driver doesnt install, that's the problem =/
I downgrade mt firmware to GB and tried to flashboot in another pc and it works.
conanjf said:
I downgrade mt firmware to GB and tried to flashboot in another pc and it works.
Click to expand...
Click to collapse
Okay!!
Congrats
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
hi..is there anybody can help me...
i got phone model 'ninetology insight' i9430.
it got brick during flash because usb disconnect..it doesn't shows anything...even charging..no display anything..cant turn it on..
hope somebody can help me with this problem..
can you get into bootloader or recovery, or see it via adb?
pavlpavel said:
can you get into bootloader or recovery, or see it via adb?
Click to expand...
Click to collapse
nope..
cant connect to pc either..when i try plug in using usb, nothing happen..
can help me how to connect to pc? thank you
Tab Bricked....Help
I used Swingtel HelloTab 16GB it bricked stuck on Boot LOGO
its CHIP is E720_SIGN & Processor is Qualcomm Powered Intelligent
pleas help me to install CWM & ROM Mathod
its not going to boot recovery MODE
its only BOOT with Vol+ & Power Button in DOWNLOAD MODE and
BOOT into Vol- & power Button in Fastboot Mode
how to Boot into recovery Mode Please HELP
I hope this helps, it happends to me when the 1st-5th time i install the Img file using LiveSuite
try to install USBDeview here the link ->tomsguidedotcom/us/download/USBDeview,0313-13254dothtml
(just retype the dot = "." , can post link here coz im new.
1. open Device Manager and USBDeview
2. click on "Created Date" on upper right of the program
3. uninstall all USB driver the date after the port hud driver (VID_1f3a_PID_efe8) on USBDeview. wait for the Device manager to install the important driver u accidentally uninstall.
4. hold power botton for at least 30 sec
5. run livesuit.exe, select your img file. connect the usb to the PC or laptop
6. while hold volume up insert the usb cable in the andriod device you have.
7. while holding the volume key, press power botton at least 2 sec, 4-5 times.
8.if unknow device show just install manually the usb driver in the livesuit folder using Device Manager (Update DriverSoftware->Browse my 9. Computer for Driver Software-> Let me Pick from the list of device -> Have Disk -> Browse (Go to the LiveSuit Folder click the *.inf driver in usb driver folder) just click ok
9. w8 for the LiveSuit to react. if nothing happend, reapeat Step 4.
10 click on "Created Date" on upper right of USBdeview, check if port hud driver (VID_1f3a_PID_efe8) turn "GREEN" mean conneted . this you click "Yes" on the LiveSuit option given.
Hope This one Help. Good luk!
rkillahph said:
I hope this helps, it happends to me when the 1st-5th time i install the Img file using LiveSuite
try to install USBDeview here the link ->tomsguidedotcom/us/download/USBDeview,0313-13254dothtml
(just retype the dot = "." , can post link here coz im new.
1. open Device Manager and USBDeview
2. click on "Created Date" on upper right of the program
3. uninstall all USB driver the date after the port hud driver (VID_1f3a_PID_efe8) on USBDeview. wait for the Device manager to install the important driver u accidentally uninstall.
4. hold power botton for at least 30 sec
5. run livesuit.exe, select your img file. connect the usb to the PC or laptop
6. while hold volume up insert the usb cable in the andriod device you have.
7. while holding the volume key, press power botton at least 2 sec, 4-5 times.
8.if unknow device show just install manually the usb driver in the livesuit folder using Device Manager (Update DriverSoftware->Browse my 9. Computer for Driver Software-> Let me Pick from the list of device -> Have Disk -> Browse (Go to the LiveSuit Folder click the *.inf driver in usb driver folder) just click ok
9. w8 for the LiveSuit to react. if nothing happend, reapeat Step 4.
10 click on "Created Date" on upper right of USBdeview, check if port hud driver (VID_1f3a_PID_efe8) turn "GREEN" mean conneted . this you click "Yes" on the LiveSuit option given.
Hope This one Help. Good luk!
Click to expand...
Click to collapse
i already try your method..but seems nothing happen...still my android cant connect to pc..
i just only need to connect to pc only..only that way i can solve my problem..thanks anyway..
sigh..
i think because i flash a wrong recovery then my phone brick...
xhitgirlx said:
i think because i flash a wrong recovery then my phone brick...
Click to expand...
Click to collapse
*is there any indication in ur device manager that u are connected wen u plug in the device?
*what usb cable are u using? try using another usb cable with complete pins.
rkillahph said:
*is there any indication in ur device manager that u are connected wen u plug in the device?
*what usb cable are u using? try using another usb cable with complete pins.
Click to expand...
Click to collapse
i try already another usb cable..nothing happen also..i dont know why..
it's like when you plug in your device to the pc nothing happen...
it means no device connected at the pc.
i think no body can help me in this situation..even the developers...thank you.:good:
Hi,
I have received a Lenovo P 780 from Amazon after a long wait which was I guess a Chinese made phone. When I go to Google play I get only Chinese apps & also all system software from Lenovo are in Chinese language I cannot use whats app since it does not recognize my number and also it does detect my current city to show weather update.. I dont want to return this phone as it takes many days to return and get a new phone some one please assist me thanks in advance
Syed Moin said:
Hi,
I have received a Lenovo P 780 from Amazon after a long wait which was I guess a Chinese made phone. When I go to Google play I get only Chinese apps & also all system software from Lenovo are in Chinese language I cannot use whats app since it does not recognize my number and also it does detect my current city to show weather update.. I dont want to return this phone as it takes many days to return and get a new phone some one please assist me thanks in advance
Click to expand...
Click to collapse
Flash a ROW(rest of the world) ROM forom this forum. Your phone will be more understandable.
Sent from my Lenovo P780
stympy said:
Flash a ROW(rest of the world) ROM forom this forum. Your phone will be more understandable.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Perfect can you please give me the steps that I should follow flash the phone with ROW apologies I'm new to these things..
Syed Moin said:
Perfect can you please give me the steps that I should follow flash the phone with ROW apologies I'm new to these things..
Click to expand...
Click to collapse
Ok here it is:
1. download in your computer the drivers
2. install drivers
3. restart your computer (just to be sure) (skip steps 1.2.3 iff you have allready installed drivers)
4. now... turn off your phone
5. plug your USB cable in your computer
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart start flash tool
10. load scatter file from ROM directory(should be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL)
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON)
13. now just now plug usb cable to your phone.
14. firmware flash should start.(some red and other color lines should appear)
15. iff the firmware is not starting remove the case of your phone and hold pressed the little red button for about 20 seconds then release. All this must be done with cable pluged in to your phone.
16. after flash is done a green circle should appear
17. disconect your phone and power on your phone
18. lenovo logo should appear. then you should be pacient because it will took some time before android boots for the first time.
19 Good luck.
stympy said:
Ok here it is:
1. download in your computer the drivers
2. install drivers
3. restart your computer (just to be sure) (skip steps 1.2.3 iff you have allready installed drivers)
4. now... turn off your phone
5. plug your USB cable in your computer
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart start flash tool
10. load scatter file from ROM directory(should be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL)
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON)
13. now just now plug usb cable to your phone.
14. firmware flash should start.(some red and other color lines should appear)
15. iff the firmware is not starting remove the case of your phone and hold pressed the little red button for about 20 seconds then release. All this must be done with cable pluged in to your phone.
16. after flash is done a green circle should appear
17. disconect your phone and power on your phone
18. lenovo logo should appear. then you should be pacient because it will took some time before android boots for the first time.
19 Good luck.
Click to expand...
Click to collapse
Hi,
Thank you so much for your help I tried doing that and step 15 does not complete. The phone is not getting detected I believe I installing MTK drivers but no luck when phone is connected to system in Device manager it show other devices and MTK driver with an ! mark but with in few seconds it goes off. I tried with many times but enabling all USB options from my phone. I will really appreciate your assistance thanks in advance.
Syed Moin said:
Hi,
Thank you so much for your help I tried doing that and step 15 does not complete. The phone is not getting detected I believe I installing MTK drivers but no luck when phone is connected to system in Device manager it show other devices and MTK driver with an ! mark but with in few seconds it goes off. I tried with many times but enabling all USB options from my phone. I will really appreciate your assistance thanks in advance.
Click to expand...
Click to collapse
I did it thanks to full updating the steps in details:victory:
Syed Moin said:
I did it thanks to full updating the steps in details:victory:
Click to expand...
Click to collapse
Sooo... it is working then..
Glad to help. :laugh:
Hi,
My tablet decided 'not to charge in off'...
If I turn it off, and connect the charger (original) it turns on, and charge with the device on! After that, if I power off the tablet, it restart, and boot on again...
Don't want to charge in off!
What could it be? How to fix it?
Some devices do it this way all the time. Some devices do this if you are using the wrong, or damaged, charger and sometimes even using a "bad" USB cable will keep the device from charging while off. It is typically set up this way so that the device can regulate its own charging.
bribeironet said:
Hi,
My tablet decided 'not to charge in off'...
If I turn it off, and connect the charger (original) it turns on, and charge with the device on! After that, if I power off the tablet, it restart, and boot on again...
Don't want to charge in off!
What could it be? How to fix it?
Click to expand...
Click to collapse
you have to flash another preloader. its an old problem. at evening i can upload a fixed preloader that fix the bug.
Damn sick Preloader
shoxxy said:
you have to flash another preloader. its an old problem. at evening i can upload a fixed preloader that fix the bug.
Click to expand...
Click to collapse
Thanks man!
Waiting for it (give me instructions, please!)
In a few minutes ill be back
download and install these drivers: http://www.mediafire.com/download/ap7v3jk7hhhhxwm/Driver_Auto_Installer_v1.1236.00.rar
download and unpack this : http://www.mediafire.com/download/1zvh5jbouvlc54w/Preloader_Fix.zip
in a few minutes i post how to do it
also it was usefull when you change the thread name to : Asus Memo PAD 7 HD ME173X (Autoboot Bug) or something like this so other user could find it better....
thx to my friend yuweng for the driver Pack
Here we go: install the driver .
start the included sp flashtool klick 'load scatter' choose the scatter file including in the download . now you see some partitions in the flashtool , only the first one 'preloader' should be selected.
disconnect the tablet from pc and turn it OFF .
press 'download' button in the flashtool. if an warning pops up you could choose yes. and then connect the tablet (off) to the pc . after a few seconds a green circle is shown by the flashtool. Done
everything at your own risk !!!
shoxxy said:
In a few minutes ill be back
download and install these drivers: http://www.mediafire.com/download/ap7v3jk7hhhhxwm/Driver_Auto_Installer_v1.1236.00.rar
download and unpack this : http://www.mediafire.com/download/1zvh5jbouvlc54w/Preloader_Fix.zip
in a few minutes i post how to do it
also it was usefull when you change the thread name to : Asus Memo PAD 7 HD ME173X (Autoboot Bug) or something like this so other user could find it better....
thx to my friend yuweng for the driver Pack
Here we go: install the driver .
start the included sp flashtool klick 'load scatter' choose the scatter file including in the download . now you see some partitions in the flashtool , only the first one 'preloader' should be selected.
disconnect the tablet from pc and turn it OFF .
press 'download' button in the flashtool. if an warning pops up you could choose yes. and then connect the tablet (off) to the pc . after a few seconds a green circle is shown by the flashtool. Done
everything at your own risk !!!
Click to expand...
Click to collapse
Job done!
Thanks, really!:good:
I'm trying to make my memo pad 7 HD boot automatically when connected to charger LOL.
Does anyone have "bugged" preloader? ...
EDIT:
SOLVED
Anybody got a clean install, but the installation of the card does not work only USB charging. Thanks
NODO-GT said:
I'm trying to make my memo pad 7 HD boot automatically when connected to charger LOL.
Does anyone have "bugged" preloader? ...
EDIT:
SOLVED
Click to expand...
Click to collapse
How did you solve it???? I really need your help.
NODO-GT said:
I'm trying to make my memo pad 7 HD boot automatically when connected to charger LOL.
Does anyone have "bugged" preloader? ...
EDIT:
SOLVED
Click to expand...
Click to collapse
Sir, How you solved this?