Here's my first costom kernel img. For all the brave out there
May suffer from increased battery drain. Feedback welcome. Not there yet: alternative governors.
Wow nice one may i request a GPU overclock please?
snoory said:
Here's my first costom kernel img. For all the brave out there
May suffer from increased battery drain. Feedback welcome. Not there yet: alternative governors.
Click to expand...
Click to collapse
thx, but what is the trick for reaching recovery?
snoory said:
Here's my first costom kernel img. For all the brave out there
May suffer from increased battery drain. Feedback welcome. Not there yet: alternative governors.
Click to expand...
Click to collapse
Thanks...
Just test it out, my Quadrant raise from 14xx (1.4GHz) to 15xx (1.6GHz) not bad..
FYI, I'm on MIUI v4 ALPHA 1 SEMC
its not include recovery. only kernel
sirkay said:
its not include recovery. only kernel
Click to expand...
Click to collapse
is it any tutorial for flashing recovery after kernel?or how to merge?
funiewski said:
is it any tutorial for flashing recovery after kernel?or how to merge?
Click to expand...
Click to collapse
here tutorial by idareyoutoclickthis
How to install CWM
Download this then extract
Make sure you enabled USB debugging, and also you need to set Screen timeout to 10 minutes so you don't miss the superuser promt
Run install-cwm1.cmd from the folder
Follow screen on screen instruction, reboot.
Click to expand...
Click to collapse
to merge you need bootimgtools
does it have some kind of side effect when we clock the phone until 1.6 Ghz??
i've flashed this kernel...it is good that the game run smoother with it...
but then i feel like this is like too fast until the animation seems to be a bit weird...
didn't check yet for the battery drain...
i've used the sirkay kernel and it saved me a lot of battery time...
albagani said:
does it have some kind of side effect when we clock the phone until 1.6 Ghz??
i've flashed this kernel...it is good that the game run smoother with it...
but then i feel like this is like too fast until the animation seems to be a bit weird...
didn't check yet for the battery drain...
i've used the sirkay kernel and it saved me a lot of battery time...
Click to expand...
Click to collapse
it depends. sometime your phone will start warm bcos your engine running beyond its normal speed. all machine have their own capabilities.
for me, normally will set speed between 1.2ghz to 1.4ghz. but i prefer 1.2ghz, dont wana force it to much
btw, its not my kernel. i added some script into ramdisk and compiled with other(s) kernel. thats all
unlocked bootloader is a must right?
Right.
Sent from my Xperia Ray using xda app-developers app
Related
Hi All,
All the features are incorporated in the MiniCM6 v 1.0.1 found here
Hit Thanks if you like my post
facing too much reboot after this update check for bugs
thnx
sachith024 said:
Hi All,
I just integrated doixanh modules into a update.zip file. I claim no credit.
MultiTouch v005
UnderVolt v001
MDDI v001
OverClock 249/748 (no module)
Xrec installable
Hit Thanks if you like my post
Click to expand...
Click to collapse
check wifi folder it may be the problem
sachith024 said:
Hi All,
I just integrated doixanh modules into a update.zip file. I claim no credit.
MultiTouch v005
UnderVolt v001
MDDI v001
OverClock 249/748 (no module)
Xrec installable
Hit Thanks if you like my post
Click to expand...
Click to collapse
This is fixed version
working fine for me
its with the default over-clocking(710)
thnx
abhi98228 said:
This is fixed version
working fine for me
its with the default over-clocking(710)
thnx
Click to expand...
Click to collapse
Works very well for me your fixed version.Thank you !
Since installing this my battery life has literally more than doubled so for that alone you have my thanks, wouldn't of installed the seperate modules but you have made it easy, good work
Sent from my X10mini using XDA App
Hi,
Thanks for the collection of updates. I for one, have also experienced the rebooting bugs.
I think the undervolting of the phone makes it reboot. I have especially experienced the rebooting when the phone tries to reconnect to wifi after being idle for some time. Maybe it draws too much current for the idle condition to supply enough power, and therefore reboots the phone?
Regards,
mfas
nice nice only why undervolt AND overclock the overclock module is already undervolted
owain94 said:
nice nice only why undervolt AND overclock the overclock module is already undervolted
Click to expand...
Click to collapse
nice nice only why undervolt AND overclock the overclock module is already undervolted
Nice work, that was my first idea with tweaks, but... i dont have a mini so i cannot test...
owain94 said:
nice nice only why undervolt AND overclock the overclock module is already undervolted
Click to expand...
Click to collapse
the overclock module is not included in this.
overclock applied through hw_config.sh
echo freq > /sys/devices/system/cpu/cpu0/cpufreq/scaling_<min or max>_freq
again... borrowed from D4rKn3sSyS...thanks to him
mfas said:
Hi,
Thanks for the collection of updates. I for one, have also experienced the rebooting bugs.
I think the undervolting of the phone makes it reboot. I have especially experienced the rebooting when the phone tries to reconnect to wifi after being idle for some time. Maybe it draws too much current for the idle condition to supply enough power, and therefore reboots the phone?
Regards,
mfas
Click to expand...
Click to collapse
not sure y its happening... one of my friend is also facing problem with v1
use abhi's or v2 .zip and let me know if it works for you.
will do some more experiments and update if required
Thank you for this compilation, just a few questions though, I want to clarify something..
1. Just want to ask if what I did was right: renamed zip file to update.zip and installed via xrec, correct?
2. How can I test all modules if it worked?
Thanks and regards,
Xaeons
Xaeons said:
Thank you for this compilation, just a few questions though, I want to clarify something..
1. Just want to ask if what I did was right: renamed zip file to update.zip and installed via xrec, correct?
2. How can I test all modules if it worked?
Thanks and regards,
Xaeons
Click to expand...
Click to collapse
1. UV- battery life increases
2. MDDI lag... its hardly noticable
3. MT- download multi touch visualizer from market and test it
4. OC- install set cpu and check the max n min freq...
Thanks satchith, I'll test it on the ff days..
Though when I tried Quadrant Advanced, back then my average was between 900-1000, now its 1100-1200..
hello guys,
i noticed that when i install the existing module the brightnes of the phone lowers ,do you know anything about that?
thank you
mitsos16x said:
hello guys,
i noticed that when i install the existing module the brightnes of the phone lowers ,do you know anything about that?
thank you
Click to expand...
Click to collapse
Thanks for ur feedback, brightness issue fixed. Please test and let me know
Hello!
This Files Works On Stock SE ROM?
dark_zhero said:
This Files Works On Stock SE ROM?
Click to expand...
Click to collapse
HTML:
echo freq > /sys/devices/system/cpu/cpu0/cpufreq/scaling_<min or max>_freq
Works well
Is ther ny update in MDDI or Undervolt????
Guys this is discussion thread of ThunderVN Kernel by thachtunganh
Changelog is
here
Click to expand...
Click to collapse
ThunderVN Download link is
here
[10/4/2012]thunderVN v1
[18/4/2012]thunderVN v1- with KGSL from 3.0 kernel and battery improvement
[29/04/2012]thunderVN v1.02- CFS
[29/04/2012]thunderVN v1.02- BFS (Recommend to use)
Click to expand...
Click to collapse
Source Code is
here
Click to expand...
Click to collapse
Kernel Blog is
here
Click to expand...
Click to collapse
Did he ask you to make this?!
Sent from my LG-P500 using Tapatalk 2
karthiknayak94 said:
Did he ask you to make this?!
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
No,I asked to make this....
Sent from my LG-P500 using xda premium
Even though its a good kernel, still doesn't beats franco.kernel smoothness, in fact i've never been able to achieve franco level smoothness with any other kernel except franco itself...
With franco i get "iphone" smoothness level on contacts and settings menues, and many apps, statusbar etc..
TakamineSubasa said:
Even though its a good kernel, still doesn't beats franco.kernel smoothness, in fact i've never been able to achieve franco level smoothness with any other kernel except franco itself...
With franco i get "iphone" smoothness level on contacts and settings menues, and many apps, statusbar etc..
Click to expand...
Click to collapse
i found this kernel better than that one.
handryg555 said:
i found this kernel better than that one.
Click to expand...
Click to collapse
better in what , in smoothness?? probably in 3d-games but im talking about gui
before u start criticising the kernel and pointing ur finger, just stick it up yo ...
its still in dev mode...
ccdreadcc said:
before u start criticising the kernel and pointing ur finger, just stick it up yo ...
its still in dev mode...
Click to expand...
Click to collapse
Yup you're right..
I was suggested to use ta-gb 1.1 + hotfix kernel (as bug-free and for good battery life) but I cannot find this specific version of the kernel. Could someone give me a link or upload it please so that I could give it a try?
Between the kernel I was suggested to use and the latest, which one do you think is better in terms of battery life and less bugs? And what is the difference between the two latest releases (10/4/2012 and 18/4/2012 <-What is this kernel)?
edit: This was the result after flashing the second one:
_purple_ said:
I was suggested to use ta-gb 1.1 + hotfix kernel (as bug-free and for good battery life) but I cannot find this specific version of the kernel. Could someone give me a link or upload it please so that I could give it a try?
Between the kernel I was suggested to use and the latest, which one do you think is better in terms of battery life and less bugs? And what is the difference between the two latest releases (10/4/2012 and 18/4/2012 <-What is this kernel)?
edit: This was the result after flashing the second one:
Click to expand...
Click to collapse
The 18/04 version has battery fixes, but also included genlock and New GPU drivers which come from 3.0 kernel.... and BTW, i'm rebasing on tagb, so don't worry, i will fix all that bug
_purple_ said:
I was suggested to use ta-gb 1.1 + hotfix kernel (as bug-free and for good battery life) but I cannot find this specific version of the kernel. Could someone give me a link or upload it please so that I could give it a try?
Between the kernel I was suggested to use and the latest, which one do you think is better in terms of battery life and less bugs? And what is the difference between the two latest releases (10/4/2012 and 18/4/2012 <-What is this kernel)?
edit: This was the result after flashing the second one:
Click to expand...
Click to collapse
TakamineSubasa said:
Even though its a good kernel, still doesn't beats franco.kernel smoothness, in fact i've never been able to achieve franco level smoothness with any other kernel except franco itself...
With franco i get "iphone" smoothness level on contacts and settings menues, and many apps, statusbar etc..
Click to expand...
Click to collapse
I think, t.a gb 1.1+hotfix is based on franco's touch drivers. I have used almost all kernels so far and I think at present Roq XIII with t.a touch drivers are the best in terms of smoothness, stability and battery. Use the conservative at 480/600. Even the t.a 1.1+hotfix is superbly smooth and has superb battery. But it has a bug that when after using gps the battery drains even if the gps is turned off. Franco kernel has multiple issues 1) Frequent reboots during calls 2) Cameranot working after first use...and many other issues.
Roq xIII with t.a touchfix is as smooth as the iphone. Only thing is you have to tweak some settings on the cynogen power menu, spareparts+ and blade buddy I also moved the default launcher (Go Launcher) to my /system/apps to have the smoothness I get now. Smoothnesss cannot come just by installing the kernel. You have to tweak settings...
pradipsoman could you please verify if the kernel that you uploaded here is the 1.1 you are suggesting? The filename is v1.2 but I have to ask because it could just be a typo. What is your experience on the current version of thunder-vn? Do you still think the older 1.1 version of thunder-vn is better than the current one and why? offtopic: One more think, is Roq xIII as good as described on stock 2.3 rom? Or is it one of those kernels made for custom roms?
@ thachtunganh So what happened to my device (stock 2.3)? Are these drivers meant to be used on ics based roms?
_purple_ said:
pradipsoman could you please verify if the kernel that you uploaded here is the 1.1 you are suggesting? The filename is v1.2 but I have to ask because it could just be a typo. What is your experience on the current version of thunder-vn? Do you still think the older 1.1 version of thunder-vn is better than the current one and why? offtopic: One more think, is Roq xIII as good as described on stock 2.3 rom? Or is it one of those kernels made for custom roms?
@ thachtunganh So what happened to my device (stock 2.3)? Are these drivers meant to be used on ics based roms?
Click to expand...
Click to collapse
Yes, but no more now, go to the theard again and you will see the new kernel
I was away from XDA from 1 month....
So, I want to know can thunderVN 1.02 be used on latest hehappy's cm9 build??
Will everything be functional???
Thank YOu!
It's too soon for your second question to be answered. It's been a few hours since the kernel was released. If you give it a try there will be one more tester to give feedback.
I just flash the last kernel on hephappy's last build (youlookbeautiful) and i got stuck in lg logo
Sent from my LG-P500 using XDA
@ TiioSam:
http://forum.xda-developers.com/showpost.php?p=25481429&postcount=749
_purple_ said:
pradipsoman could you please verify if the kernel that you uploaded here is the 1.1 you are suggesting? The filename is v1.2 but I have to ask because it could just be a typo. What is your experience on the current version of thunder-vn? Do you still think the older 1.1 version of thunder-vn is better than the current one and why? offtopic: One more think, is Roq xIII as good as described on stock 2.3 rom? Or is it one of those kernels made for custom roms?
@ thachtunganh So what happened to my device (stock 2.3)? Are these drivers meant to be used on ics based roms?
Click to expand...
Click to collapse
I think you can now use Thundervn Latest Release from TA Have tested it and now it does not have the wifi bug (only bug that t.a 1.1+hotfix had). It is smooth as butter and has excellent battery. Lets experiment further...
I'm testing it too. I'm satisfied by the smoothness too but how did you make a conclusion that soon about the battery life and the lack of gps bug?
thachtunganh said:
Bugs:
Slow USB read/write speed! - This will anoy some people that usually transfer files.
What i need to do next?
Increase the read and write speed of USB Mass Storage.
Click to expand...
Click to collapse
On the latest 1.02 version is the above bug considered to be present? I get 7MB/s write and 15MB/s read speeds. If these are slow, what speed would be normal?
_purple_ said:
I'm testing it too. I'm satisfied by the smoothness too but how did you make a conclusion that soon about the battery life and the lack of gps bug?
On the latest 1.02 version is the above bug considered to be present? I get 7MB/s write and 15MB/s read speeds. If these are slow, what speed would be normal?
Click to expand...
Click to collapse
No, it's fixed, i can copy a file to my sdcard with 4.5MB/s .. if i forgot to delete it, sorry and thanks for reminding me!
The battery take short after upgrade from 4.0.2.A.0.62 to 4.1.B.0.431 and script hw_config.sh or touchpanel.sh its not work.
glykas said:
The battery take short after upgrade from 4.0.2.A.0.62 to 4.1.B.0.431 and script hw_config.sh or touchpanel.sh its not work.
Click to expand...
Click to collapse
which rom you are using?
usman_fareed said:
which rom you are using?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1695514
that and the fix with gscript not work and have battery problem is ending very soon it takes almost one day without extremely use with ST15_4.1.B.0.431_NO
And with ST15i_4.0.2.A.0.62_(1251-0020) the battery is verry good it takes 2 days with playing all day and script fix work perfect on Decrease Touchscreen sensitivity (Overheat Issue)..
glykas said:
http://forum.xda-developers.com/showthread.php?t=1695514
that and the fix with gscript not work and have battery problem is ending very soon it takes almost one day without extremely use with ST15_4.1.B.0.431_NO
And with ST15i_4.0.2.A.0.62_(1251-0020) the battery is verry good it takes 2 days with playing all day and script fix work perfect on Decrease Touchscreen sensitivity (Overheat Issue)..
Click to expand...
Click to collapse
if your bootloader is unlocked then install custom kernel with stock rom it helps u alot in consuming less battery life time.
usman_fareed said:
if your bootloader is unlocked then install custom kernel with stock rom it helps u alot in consuming less battery life time.
Click to expand...
Click to collapse
i have unlocked bootloader the firmware that is custome but have the same problem.
and did you install some custom kernel, as he said?
najodleglejszy said:
and did you install some custom kernel, as he said?
Click to expand...
Click to collapse
custom kernel yes the boot_EXtendedStockKernel_ST15i.img but have a bugs i cant find that stoke rom.if you can help to test it.
this is official rom of mini pro http://uploaded.to/file/92xfv08v first flash this rom and then flash this kernel https://www.dropbox.com/sh/w6v6t0a72eh3n3k/z4_cBqCo9v/st15i_mini/mini_mesa_v1.5.img
usman_fareed said:
this is official rom of mini pro http://uploaded.to/file/92xfv08v first flash this rom and then flash this kernel https://www.dropbox.com/sh/w6v6t0a72eh3n3k/z4_cBqCo9v/st15i_mini/mini_mesa_v1.5.img
Click to expand...
Click to collapse
thanks for the help man that rom i have but missing kernel now its ok rooted and shell rooted.with fix
just press the thanks button
usman_fareed said:
just press the thanks button
Click to expand...
Click to collapse
i find more fix if you want build.prop and hw_config.sh replase with fixed
ok now its good with all the battery it take 1 day but if i play games its end very fast :/
Everyone will give different suggestions... Here's mine
You could try this combo:
Real_ICS v4.1 + Rage kernel
KRsH kernel is also good for battery life.
EDiT: If you play games, of course the battery will drain fast LoL.
Real ICS r5.1 & r5.2
KRsH Kernel v3.0 1,6Ghz version not bootup i saw bootlogo and then black screen
but with Rage kernel working ok
i test it is perfect its work nice with battery economy thanks
Hi
I have xperia neo L
I bought it 2 months ago
I have to charge it 2 times a day
Is the problem with the phone or the battery and what should I do?
HEY!
armenian black eye said:
Hi
I have xperia neo L
I bought it 2 months ago
I have to charge it 2 times a day
Is the problem with the phone or the battery and what should I do?
Click to expand...
Click to collapse
What Kernel,Rom u using?
what r u ur OC settings?
and btw hav u tried different kernels and RoMs?
Important-
Be really carefull when overclocking(as mentioned in many places)
cause ur battery will have more strain.
and because of that u will lose a lot of Ions/cells(science thing )
and that will decrease ur battery life very badly.
My EXPERIENCE
Please Click 'Thanks' If I helped
my kernel version is
3.6.32.9-perf
[email protected] #1
Click to expand...
Click to collapse
I don't know which rom I am using but it just looks like this one
[rom]arconium ics 5.0 port [neo/ l/v ] 2 november
Click to expand...
Click to collapse
and no i haven't tried to different kernels or roms yet
and for OC settings i don't know if this is what u talking about
Max: 1024MHz
Min : 245MHz
armenian black eye said:
my kernel version is
I don't know which rom I am using but it just looks like this one
and no i haven't tried to different kernels or roms yet
and for OC settings i don't know if this is what u talking about
Max: 1024MHz
Min : 245MHz
Click to expand...
Click to collapse
do this things
install wakelock detector to see which app is causing wakelocks and draining battery
change the governor to smartassh3 if your kernel supports it
in your post it's your kernel version not the name of the kernel
avinashrocks1990 said:
do this things
install wakelock detector to see which app is causing wakelocks and draining battery
change the governor to smartassh3 if your kernel supports it
in your post it's your kernel version not the name of the kernel
Click to expand...
Click to collapse
every thing is normal in the wakelock detector
and the kernel doesn't support this governer
??
armenian black eye said:
my kernel version is
I don't know which rom I am using but it just looks like this one
and no i haven't tried to different kernels or roms yet
and for OC settings i don't know if this is what u talking about
Max: 1024MHz
Min : 245MHz
Click to expand...
Click to collapse
ur clock speeds are fine,
i suggest u try ROMs like Ultimate HD,Revolution ICS ,etc
if uve unlocked bootloader . u can try even more Roms and kernels.
and again, if uve unlocked - try suave kernel , fusion kernel,etc
and ya u should try wakelock
or
just simply see battery usage in settings(if u dint see)
and keep an eye on the governor u select
Please Click 'Thanks' if i helped
You should try following:
1. Changing CPU governor (e.g. switch to ondemand from performance, or to powersave, sometimes those default governors can be buggy, so try alternative like smartass)
2. Remove widgets from homescreen that you don't use, especially weather widget.
3. Turn off sync when you don't need it.
4. Change your brightness. If it is on max set it to half or automatic, you can turn it completely off, but then screen is unusable on daylight (my experience)
5. Turn off wifi or data when you don't use it.
You can also do some tweaking in easier way using Pimp My ROM from Play Store. If that still doesn't help, try different kernel.
armenian black eye said:
every thing is normal in the wakelock detector
and the kernel doesn't support this governer
??
Click to expand...
Click to collapse
then only two things left
your battery needs calibration
or
your battery's life is over
srik9999 said:
ur clock speeds are fine,
i suggest u try ROMs like Ultimate HD,Revolution ICS ,etc
if uve unlocked bootloader . u can try even more Roms and kernels.
and again, if uve unlocked - try suave kernel , fusion kernel,etc
and ya u should try wakelock
or
just simply see battery usage in settings(if u dint see)
and keep an eye on the governor u select
Please Click 'Thanks' if i helped
Click to expand...
Click to collapse
i installed revolution ics rom but the mobile wouldn't turn on
It gives me the sony logo the reboot again
What should i do?
armenian black eye said:
i installed revolution ics rom but the mobile wouldn't turn on
It gives me the sony logo the reboot again
What should i do?
Click to expand...
Click to collapse
if you are neo user flash neo v ftf to increase system partition before installing huge custom roms ..... otherwise bootloops
deccen90 said:
if you are neo user flash neo v ftf to increase system partition before installing huge custom roms ..... otherwise bootloops
Click to expand...
Click to collapse
i am neo l user
What is boot loop
armenian black eye said:
i am neo l user
What is boot loop
Click to expand...
Click to collapse
Stuck at Sony logo or ROM logo..
full wipe before installing new ROM and also use compatible kernel
deccen90 said:
Stuck at Sony logo or ROM logo..
full wipe before installing new ROM and also use compatible kernel
Click to expand...
Click to collapse
so now i just have to install a compatible kernel?
armenian black eye said:
so now i just have to install a compatible kernel?
Click to expand...
Click to collapse
yes
you should always install a cmpatible kernel
always read op before flashing anything
avinashrocks1990 said:
then only two things left
your battery needs calibration
or
your battery's life is over
Click to expand...
Click to collapse
There is no such thing as 'battery calibration'!!! it's a myth, placebo, or whatever You call it, and You, avinash, should know it
zadrozny91 said:
There is no such thing as 'battery calibration'!!! it's a myth, placebo, or whatever You call it, and You, avinash, should know it
Click to expand...
Click to collapse
i know it but i don't know why some people report that it works
i know battery stats are reset at full charge
but i think manually resetting may help if automatic resetting is not working for some reason
and in the end what's the harm in trying
what will happen if i give max nd min both frequency to 1.6ghz by overclocking on zd kernel??
Maybe the ans is it will work like 1.6 ghz.
But when i do it any kernel controler as zd,thunderzap,trickstar,franco my phone just work on 1ghz only nd in deep sleep when in no use.
Some1 help me out please?
how to get the best outta it??
I am using this kernel but I can't enable swap.
vampirechamp said:
I am using this kernel but I can't enable swap.
Click to expand...
Click to collapse
Maybe this kernel doesn't support swap
BatDroid said:
what will happen if i give max nd min both frequency to 1.6ghz by overclocking on zd kernel??
Maybe the ans is it will work like 1.6 ghz.
But when i do it any kernel controler as zd,thunderzap,trickstar,franco my phone just work on 1ghz only nd in deep sleep when in no use.
Some1 help me out please?
how to get the best outta it??
Click to expand...
Click to collapse
Having the same problem.....found any solution?
Sansky12 said:
Having the same problem.....found any solution?
Click to expand...
Click to collapse
ya..
flash r10 kernel by psych.half
BatDroid said:
ya..
flash r10 kernel by psych.half
Click to expand...
Click to collapse
But in the thread it says its for cm11...and im on stock.
Also i wanna share something:
I managed to clock the kernel on 1600mhz....
But then when i checked states..all the time kernel remained on 1000mhz. see attachment. Also the cpu always showed offline...and that's funny as our phone got only 1 core and if that too becomes offline...how the hell will then our phone be working?
Then i reverted back to stock kernel....and there too cpu0 was seen offline....is that even possible?
Hope this helps you in figuring out the problem.:fingers-crossed:
Sansky12 said:
But in the thread it says its for cm11...and im on stock.
Click to expand...
Click to collapse
r10 is for all roms
flash it using a cwm recovery
Sansky12 said:
Also i wanna share something:
I managed to clock the kernel on 1600mhz....
But then when i checked states..all the time kernel remained on 1000mhz. see attachment. Also the cpu always showed offline...and that's funny as our phone got only 1 core and if that too becomes offline...how the hell will then our phone be working?
Then i reverted back to stock kernel....and there too cpu0 was seen offline....is that even possible?
Hope this helps you in figuring out the problem.:fingers-crossed:
Click to expand...
Click to collapse
that's a broken cpu_freq driver.
Working one is here
In the r10 thread i saw something about enabling/disabling camera.....could you explain it please..?
Sansky12 said:
In the r10 thread i saw something about enabling/disabling camera.....could you explain it please..?
Click to expand...
Click to collapse
disabling memory allocation for cam gives u a little more free memory.
Not necessary
BatDroid said:
that's a broken cpu_freq driver.
Working one is here
Click to expand...
Click to collapse
The download link's broken.....in the thread...can u provide another?....i'm using uc mini
Sansky12 said:
The download link's broken.....in the thread...can u provide another?....i'm using uc mini
Click to expand...
Click to collapse
disable speedMode or use a browser(ucb) js enabled
That kernel didn't boot my device....
although there was boot sound but there wasn't any boot animation.....just a black screen....and It just stuck in that black screen.....
I've moved on to cm11 ....irritated by stock.....
thanks for your suggestions anyway
Sansky12 said:
That kernel didn't boot my device....
although there was boot sound but there wasn't any boot animation.....just a black screen....and It just stuck in that black screen.....
I've moved on to cm11 ....irritated by stock.....
thanks for your suggestions anyway
Click to expand...
Click to collapse
don't flash this kernel on older firmwares