Guys this is discussion thread of ThunderVN Kernel by thachtunganh
Changelog is
here
Click to expand...
Click to collapse
ThunderVN Download link is
here
[10/4/2012]thunderVN v1
[18/4/2012]thunderVN v1- with KGSL from 3.0 kernel and battery improvement
[29/04/2012]thunderVN v1.02- CFS
[29/04/2012]thunderVN v1.02- BFS (Recommend to use)
Click to expand...
Click to collapse
Source Code is
here
Click to expand...
Click to collapse
Kernel Blog is
here
Click to expand...
Click to collapse
Did he ask you to make this?!
Sent from my LG-P500 using Tapatalk 2
karthiknayak94 said:
Did he ask you to make this?!
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
No,I asked to make this....
Sent from my LG-P500 using xda premium
Even though its a good kernel, still doesn't beats franco.kernel smoothness, in fact i've never been able to achieve franco level smoothness with any other kernel except franco itself...
With franco i get "iphone" smoothness level on contacts and settings menues, and many apps, statusbar etc..
TakamineSubasa said:
Even though its a good kernel, still doesn't beats franco.kernel smoothness, in fact i've never been able to achieve franco level smoothness with any other kernel except franco itself...
With franco i get "iphone" smoothness level on contacts and settings menues, and many apps, statusbar etc..
Click to expand...
Click to collapse
i found this kernel better than that one.
handryg555 said:
i found this kernel better than that one.
Click to expand...
Click to collapse
better in what , in smoothness?? probably in 3d-games but im talking about gui
before u start criticising the kernel and pointing ur finger, just stick it up yo ...
its still in dev mode...
ccdreadcc said:
before u start criticising the kernel and pointing ur finger, just stick it up yo ...
its still in dev mode...
Click to expand...
Click to collapse
Yup you're right..
I was suggested to use ta-gb 1.1 + hotfix kernel (as bug-free and for good battery life) but I cannot find this specific version of the kernel. Could someone give me a link or upload it please so that I could give it a try?
Between the kernel I was suggested to use and the latest, which one do you think is better in terms of battery life and less bugs? And what is the difference between the two latest releases (10/4/2012 and 18/4/2012 <-What is this kernel)?
edit: This was the result after flashing the second one:
_purple_ said:
I was suggested to use ta-gb 1.1 + hotfix kernel (as bug-free and for good battery life) but I cannot find this specific version of the kernel. Could someone give me a link or upload it please so that I could give it a try?
Between the kernel I was suggested to use and the latest, which one do you think is better in terms of battery life and less bugs? And what is the difference between the two latest releases (10/4/2012 and 18/4/2012 <-What is this kernel)?
edit: This was the result after flashing the second one:
Click to expand...
Click to collapse
The 18/04 version has battery fixes, but also included genlock and New GPU drivers which come from 3.0 kernel.... and BTW, i'm rebasing on tagb, so don't worry, i will fix all that bug
_purple_ said:
I was suggested to use ta-gb 1.1 + hotfix kernel (as bug-free and for good battery life) but I cannot find this specific version of the kernel. Could someone give me a link or upload it please so that I could give it a try?
Between the kernel I was suggested to use and the latest, which one do you think is better in terms of battery life and less bugs? And what is the difference between the two latest releases (10/4/2012 and 18/4/2012 <-What is this kernel)?
edit: This was the result after flashing the second one:
Click to expand...
Click to collapse
TakamineSubasa said:
Even though its a good kernel, still doesn't beats franco.kernel smoothness, in fact i've never been able to achieve franco level smoothness with any other kernel except franco itself...
With franco i get "iphone" smoothness level on contacts and settings menues, and many apps, statusbar etc..
Click to expand...
Click to collapse
I think, t.a gb 1.1+hotfix is based on franco's touch drivers. I have used almost all kernels so far and I think at present Roq XIII with t.a touch drivers are the best in terms of smoothness, stability and battery. Use the conservative at 480/600. Even the t.a 1.1+hotfix is superbly smooth and has superb battery. But it has a bug that when after using gps the battery drains even if the gps is turned off. Franco kernel has multiple issues 1) Frequent reboots during calls 2) Cameranot working after first use...and many other issues.
Roq xIII with t.a touchfix is as smooth as the iphone. Only thing is you have to tweak some settings on the cynogen power menu, spareparts+ and blade buddy I also moved the default launcher (Go Launcher) to my /system/apps to have the smoothness I get now. Smoothnesss cannot come just by installing the kernel. You have to tweak settings...
pradipsoman could you please verify if the kernel that you uploaded here is the 1.1 you are suggesting? The filename is v1.2 but I have to ask because it could just be a typo. What is your experience on the current version of thunder-vn? Do you still think the older 1.1 version of thunder-vn is better than the current one and why? offtopic: One more think, is Roq xIII as good as described on stock 2.3 rom? Or is it one of those kernels made for custom roms?
@ thachtunganh So what happened to my device (stock 2.3)? Are these drivers meant to be used on ics based roms?
_purple_ said:
pradipsoman could you please verify if the kernel that you uploaded here is the 1.1 you are suggesting? The filename is v1.2 but I have to ask because it could just be a typo. What is your experience on the current version of thunder-vn? Do you still think the older 1.1 version of thunder-vn is better than the current one and why? offtopic: One more think, is Roq xIII as good as described on stock 2.3 rom? Or is it one of those kernels made for custom roms?
@ thachtunganh So what happened to my device (stock 2.3)? Are these drivers meant to be used on ics based roms?
Click to expand...
Click to collapse
Yes, but no more now, go to the theard again and you will see the new kernel
I was away from XDA from 1 month....
So, I want to know can thunderVN 1.02 be used on latest hehappy's cm9 build??
Will everything be functional???
Thank YOu!
It's too soon for your second question to be answered. It's been a few hours since the kernel was released. If you give it a try there will be one more tester to give feedback.
I just flash the last kernel on hephappy's last build (youlookbeautiful) and i got stuck in lg logo
Sent from my LG-P500 using XDA
@ TiioSam:
http://forum.xda-developers.com/showpost.php?p=25481429&postcount=749
_purple_ said:
pradipsoman could you please verify if the kernel that you uploaded here is the 1.1 you are suggesting? The filename is v1.2 but I have to ask because it could just be a typo. What is your experience on the current version of thunder-vn? Do you still think the older 1.1 version of thunder-vn is better than the current one and why? offtopic: One more think, is Roq xIII as good as described on stock 2.3 rom? Or is it one of those kernels made for custom roms?
@ thachtunganh So what happened to my device (stock 2.3)? Are these drivers meant to be used on ics based roms?
Click to expand...
Click to collapse
I think you can now use Thundervn Latest Release from TA Have tested it and now it does not have the wifi bug (only bug that t.a 1.1+hotfix had). It is smooth as butter and has excellent battery. Lets experiment further...
I'm testing it too. I'm satisfied by the smoothness too but how did you make a conclusion that soon about the battery life and the lack of gps bug?
thachtunganh said:
Bugs:
Slow USB read/write speed! - This will anoy some people that usually transfer files.
What i need to do next?
Increase the read and write speed of USB Mass Storage.
Click to expand...
Click to collapse
On the latest 1.02 version is the above bug considered to be present? I get 7MB/s write and 15MB/s read speeds. If these are slow, what speed would be normal?
_purple_ said:
I'm testing it too. I'm satisfied by the smoothness too but how did you make a conclusion that soon about the battery life and the lack of gps bug?
On the latest 1.02 version is the above bug considered to be present? I get 7MB/s write and 15MB/s read speeds. If these are slow, what speed would be normal?
Click to expand...
Click to collapse
No, it's fixed, i can copy a file to my sdcard with 4.5MB/s .. if i forgot to delete it, sorry and thanks for reminding me!
Related
Close thread please.
Has anyone tried this ROM? any comparison should be with LOL v1.4 or Megatron? some screenshots would not?
Wow, custom ROM based on 2.2.2! Nice one, sir, I am actually considering moving on from 2.2.
Please specify the apps you removed or the ones you kept, whatever is shorter.
When I'll back home (23.00 gtm+1) i'll update this post with your requests, ok? I love my rom, eheh! Take patience, please!
And if you don't mind, could you post the differences from 2.2 to 2.2.2?
Magnumutz said:
And if you don't mind, could you post the differences from 2.2 to 2.2.2?
Click to expand...
Click to collapse
Of course!!! Thanks!
any screenshots?
First Post updated!
Good job mate. As soon as I login through pc, I will try it.
DookMatt said:
First Post updated!
Click to expand...
Click to collapse
Sent from my LG-P500 using Tapatalk
Still want to ask to go with this rom use black statusbar as in this post http://www.androidworld.it/forum/modding-e-firmware-lg-optimus-one-114/%5Bmodifiche-rom-lol-1-4%5D-statusbar-e-icone-11534/? statusbar looks better black than white. Today afternoon I try to flash it because it seems that it is a good rom
EDIT:So I flash this rom, looks fast .. I tried to flash blackbar and works up to an hour, not to see :-(. and I miss that little power button is unable to reboot and reboot into recovery. even restore a backup of titanium applications and see how then will work. yet satisfied, and praise your good work on this rom
In future i'll not change theme and keyboard because these are original and stable! All porting having some problems... i think that theme for lol 1.4 (only 1.4) works on nessy. I hope that you like this rom. It's very fast but i must remove adw because it's so slow with zeam (very fast)
LOL Theme 1.4 works but blackbar not see the clock. ADW not use otherwise, I prefer the GO Launcher EX czech. so far it seems fast rom. For me the crucial speed and battery life
More battery life with "ondemand" governor!
the theme does not work because it does not change the file "android-policy.jar" I think... maybe..!
you must flash theme only for froyo 2.2.2!!!
LOL 1.4 is 2.2.2.enough flash original status bar and then it black bar and all is well . I can flash the kernel : Kernel Optimizations Touchscreen v1.1 http://forum.xda-developers.com/showpost.php?p=11270721&postcount=237 ???? it should work better than Mik_os in the 1.1 kernel?
mitsuu84 said:
LOL 1.4 is 2.2.2.enough flash original status bar and then it black bar and all is well . I can flash the kernel : Kernel Optimizations Touchscreen v1.1 http://forum.xda-developers.com/showpost.php?p=11270721&postcount=237 ???? it should work better than Mik_os in the 1.1 kernel?
Click to expand...
Click to collapse
yes you can flash sippolo's kernel without any problems
mitsuu84 said:
LOL 1.4 is 2.2.2.enough flash original status bar and then it black bar and all is well . I can flash the kernel : Kernel Optimizations Touchscreen v1.1 http://forum.xda-developers.com/showpost.php?p=11270721&postcount=237 ???? it should work better than Mik_os in the 1.1 kernel?
Click to expand...
Click to collapse
Yes, you can flash it but I prefer Mik_os kernel!
and who do you think is better? Mik_os the kernel in the 1.1 kernel or sippolo? thanks for the advice
mitsuu84 said:
and who do you think is better? Mik_os the kernel in the 1.1 kernel or sippolo? thanks for the advice
Click to expand...
Click to collapse
sippolo's kernel fix also axis inversion and implement mik_os fix ...
mitsuu84 said:
and who do you think is better? Mik_os the kernel in the 1.1 kernel or sippolo? thanks for the advice
Click to expand...
Click to collapse
Because I like his kernel and I have never had problems. Anyway, if you want to use sippolo kernel, you can!
EDIT: Now i flash sippolo kernel and test it. Maybe in next release I'll integrate it, ok?
DookMatt said:
Of course!!! Thanks!
Click to expand...
Click to collapse
Ok, where are they?
Sent from my LG Optimus One
Hey guys, i hv rooted my phone n I want to flash a lag fix kernel on stock rom 2.2.2.. Which one sould I go for,
mik_os 1.1 / mik_os 1.2 / LOL lag fix kernel / any other?
Plz suggest the best one..
neither ,,,theres a der_caveman fix signed-kernelv1.1 optimised by sippolo everybody is using that one
How is it better than the others??
sarfaraz1989 said:
neither ,,,theres a der_caveman fix signed-kernelv1.1 optimised by sippolo everybody is using that one
Click to expand...
Click to collapse
can these kernels be installed with stock rom?
my phone says:
android version: 2.2
kernel version: 2.6.32.9
software version: v10c - oct-19-2010
i rooted the phone without hitches using z4root. i just want a better kernel as not brave enough for the custom ROMs.
thanks
ash
sarfaraz1989 said:
neither ,,,theres a der_caveman fix signed-kernelv1.1 optimised by sippolo everybody is using that one
Click to expand...
Click to collapse
Thnx sarfaraz..
I flashed der_caveman fix signed-kernelv1.1.It made my gaming experience much better..I flashed mik_os too but sippolo's one was better..
where can i find der_caveman fix signed-kernelv1.1 optimised by sippolo?
guys if u are into gaming ...Courtesy a dev franscisco.franco...He have a super optimised rom best for gaming i just installed it its amazing !!!! And the best part it has all optimizations in it u dont have to worry abt a thing..Just follow the instructions and set it up...Its got everything from best kernel to awesome hacks and tweaks i m loving it
http://forum.xda-developers.com/showthread.php?t=1049518
7s10u said:
where can i find der_caveman fix signed-kernelv1.1 optimised by sippolo?
Click to expand...
Click to collapse
here
http://forum.xda-developers.com/showpost.php?p=11270721&postcount=237
sarfaraz1989 said:
guys if u are into gaming ...Courtesy a dev franscisco.franco...He have a super optimised rom best for gaming i just installed it its amazing !!!! And the best part it has all optimizations in it u dont have to worry abt a thing..Just follow the instructions and set it up...Its got everything from best kernel to awesome hacks and tweaks i m loving it
http://forum.xda-developers.com/showthread.php?t=1049518
Click to expand...
Click to collapse
thanks,but do you know if i can find only the kernel to flash or i must flash the rom because im in lol 1.4.2 rom with dookmat kernel flashed over and works great
well u can always flash the kernel (caveman's) with the link i posted above
Does data of phone wipes after flashing with custom kernel?
I've all things done made a custom recovery even. With 1.2 version even.anything else I need to do?
Sent from my LG-P500 using XDA App
thanks!!!!!
is there any kernel which helps with battery life. I don't necessarily want a custom rom. any kernel which helps with battery life I would be interested. my rooted stock v.10c is running out of juice rather quickly and I am not yet using heavily. I am not too much into gaming or multimedia. 3g has to be on; as in my area 2g signal is worse than 3g.... go figure.
thanks
ash
i recommend u flash der_caveman's kernel and install and setup juice defender from market..I have done the same..Plus a tweaks like low brightness and powersave governor when screen is off(SetCPU) help
Hi all can i try flashing this kernel on my stock rom...This one seems nice..
[ROM] devoid.franco (franco.Kernel.v6: BFQ,BFS,smartass,lagfix,3D drivers +)
Here's my first costom kernel img. For all the brave out there
May suffer from increased battery drain. Feedback welcome. Not there yet: alternative governors.
Wow nice one may i request a GPU overclock please?
snoory said:
Here's my first costom kernel img. For all the brave out there
May suffer from increased battery drain. Feedback welcome. Not there yet: alternative governors.
Click to expand...
Click to collapse
thx, but what is the trick for reaching recovery?
snoory said:
Here's my first costom kernel img. For all the brave out there
May suffer from increased battery drain. Feedback welcome. Not there yet: alternative governors.
Click to expand...
Click to collapse
Thanks...
Just test it out, my Quadrant raise from 14xx (1.4GHz) to 15xx (1.6GHz) not bad..
FYI, I'm on MIUI v4 ALPHA 1 SEMC
its not include recovery. only kernel
sirkay said:
its not include recovery. only kernel
Click to expand...
Click to collapse
is it any tutorial for flashing recovery after kernel?or how to merge?
funiewski said:
is it any tutorial for flashing recovery after kernel?or how to merge?
Click to expand...
Click to collapse
here tutorial by idareyoutoclickthis
How to install CWM
Download this then extract
Make sure you enabled USB debugging, and also you need to set Screen timeout to 10 minutes so you don't miss the superuser promt
Run install-cwm1.cmd from the folder
Follow screen on screen instruction, reboot.
Click to expand...
Click to collapse
to merge you need bootimgtools
does it have some kind of side effect when we clock the phone until 1.6 Ghz??
i've flashed this kernel...it is good that the game run smoother with it...
but then i feel like this is like too fast until the animation seems to be a bit weird...
didn't check yet for the battery drain...
i've used the sirkay kernel and it saved me a lot of battery time...
albagani said:
does it have some kind of side effect when we clock the phone until 1.6 Ghz??
i've flashed this kernel...it is good that the game run smoother with it...
but then i feel like this is like too fast until the animation seems to be a bit weird...
didn't check yet for the battery drain...
i've used the sirkay kernel and it saved me a lot of battery time...
Click to expand...
Click to collapse
it depends. sometime your phone will start warm bcos your engine running beyond its normal speed. all machine have their own capabilities.
for me, normally will set speed between 1.2ghz to 1.4ghz. but i prefer 1.2ghz, dont wana force it to much
btw, its not my kernel. i added some script into ramdisk and compiled with other(s) kernel. thats all
unlocked bootloader is a must right?
Right.
Sent from my Xperia Ray using xda app-developers app
Hey guys am done with custom rom which are buggy i.e. cyanogenmod, oxygen etc I need a good camera, battery life am pissed off with bugs so big free too!! I thought stock would be better but I need a best combination with stock rom for battery life!! Plz suggest for the same!!!
ayazm.140895 said:
Hey guys am done with custom rom which are buggy i.e. cyanogenmod, oxygen etc I need a good camera, battery life am pissed off with bugs so big free too!! I thought stock would be better but I need a best combination with stock rom for battery life!! Plz suggest for the same!!!
Click to expand...
Click to collapse
Try to use franco kernel conservative or roq kernel with thachtungahn ts drivers
http://www.mioptimusone.com/foros/showthread.php?tid=646
In my opinion, roq kernels are very good!
If you want more performances, try pp kernel
http://perfectpeso.x.gg/
It's quite good too, maybe a bit less battery friendly
Of course, tin order to increase performances, you have to flash some tweaks, you can find them here
http://forum.xda-developers.com/showthread.php?t=1529777
I guess u can try something like a modified stock version.
Ex: Resurrection, Optimus1 origins etc,,, which not only give you better battery life but also the feel of a custom ROM. I personally like the Optimus1 Origins 2.1 version as it is quite stable.
Sooner or later, everyone should realize that no rom is perfect as the definition of perfect varies for everyone. With that being said, a stock rom (or a slightly modded one) would be very suitable.
Sent from my LG-P500 using xda premium
Hey guys thanks for the advice I'll try these roms but I would rather prefer default stock rom with some tweaks like changing kernel!!! I didn't like optimus origins cuz I get an error of some setting force close and apn problem in saving!!!!!
Sent from my LG-P500
ayazm.140895 said:
Hey guys thanks for the advice I'll try these roms but I would rather prefer default stock rom with some tweaks like changing kernel!!! I didn't like optimus origins cuz I get an error of some setting force close and apn problem in saving!!!!!
Sent from my LG-P500
Click to expand...
Click to collapse
use openoptimus rom by bytecode.Best custom rom based on stock.
Best Rom for Battery Life?
The Talhos Rom GTR is the best so far, anyone think the same?
Tested many kernels......
I have tested many kernels and stock based roms......
I think Dynamite 4.5G and ta-gb 1.2 is the best combination...
Also DjNoxd kernel works well....
Franco kernel gives gr8 battery life.....but has bugs like random boots and storage card not detecting wen exit frm mass storage mode.....(can use if u want battery and have wifi to exchange files)
RoQ kernel is gr8 performance but battery life is not that good....(gr8 for gaming)
I recommend dynamite bcoz it is already tweaked and camera n other stock apps work gr8....
ayazm.140895 said:
Hey guys thanks for the advice I'll try these roms but I would rather prefer default stock rom with some tweaks like changing kernel!!! I didn't like optimus origins cuz I get an error of some setting force close and apn problem in saving!!!!!
Sent from my LG-P500
Click to expand...
Click to collapse
That's why I use Optimus Origins 2.0 version (sorry as I said 2.1 earlier by mistake) The latest update has that force close bug but the 2.0 is pretty smooth. And regarding APN, you just need to send a message to your operator in order to get the apn settings and once you get it, you can back it up for future use.
I use Optimus Origins 2.0 with the ICS theme (created for Dynamite) and I can't ask for more
+1 for Dynamic rom 4.5G. The battery life so good.
Techgod said:
I have tested many kernels and stock based roms......
I think Dynamite 4.5G and ta-gb 1.2 is the best combination...
Also DjNoxd kernel works well....
Franco kernel gives gr8 battery life.....but has bugs like random boots and storage card not detecting wen exit frm mass storage mode.....(can use if u want battery and have wifi to exchange files)
RoQ kernel is gr8 performance but battery life is not that good....(gr8 for gaming)
I recommend dynamite bcoz it is already tweaked and camera n other stock apps work gr8....
Click to expand...
Click to collapse
Hey could u plz direct me to thread of ta-gb kernel thread and to the roq kernel (should be in English cuz roq 's last thread was in another language of mioptimus thread )!!!
Sent from my LG-P500
ayazm.140895 said:
Hey could u plz direct me to thread of ta-gb kernel thread and to the roq kernel (should be in English cuz roq 's last thread was in another language of mioptimus thread )!!!
Sent from my LG-P500
Click to expand...
Click to collapse
hey cant u use google translate????
ashishv said:
hey cant u use google translate????
Click to expand...
Click to collapse
Ok but I can't find thread of ta-gb kernel at all I need to see the change log too!! And about the roq's thread I didn't think of that though I use many times
Sent from my LG-P500
ta's kernel thread can be found here.
Changelog can be found at his github: here
DJNoXD said:
ta's kernel thread can be found here.
Changelog can be found at his github: here
Click to expand...
Click to collapse
Hey,I have been across the thread I thought it was some other kernel cuz the name was different and it has some bug so guys who are using that kernel how do u solve it other than suggested by developer!!!! Am gonna use that kernel with dynamite rom!!
www.andro9.in/2012/03/core-of-ta-gb-11-for-lg-p500.html?m=1
I m using this one.....i think ta-gb and thundervn are different kernels by same developer....
LG Optimus One
Dynamite 4.5G
Ta-gb 1.1
320/600 Mhz InteractiveX
Techgod said:
i think ta-gb and thundervn are different kernels by same developer....
Click to expand...
Click to collapse
It's the only kernel thread of thachtunganh (link to all threads he started). I think just the name changed.
If you want to know exactly just write him a PN.
DJNoXD said:
It's the only kernel thread of thachtunganh (link to all threads he started). I think just the name changed.
If you want to know exactly just write him a PN.
Click to expand...
Click to collapse
Hey I think both different cuz I saw the mediafire link of both kennels were different!!! Let's pm the developer ask!!! Am gonna ask him!!!
Sent from my LG-P500
v2 Released. Scroll down for info!
Hello,
After lots of help from sirkay and FXP, I've built my own kernel that I thought I'd share with you.
This kernel wouldn't exist without the hard work of FXP. This is built from his source code. All real credit for this belongs with him (and DoomLord too, also an FXP Team member)
That said, this is my take and keeps the rather awesome release that is CM7.2 alive!
To be clear: This is a kernel for Cyanogen Mod 7.2 - Gingerbread! If you want a good ICS Kernel look at Sirkay's Thread.
So, what's different?
Uses a very recent GCC to compile, GCC version 4.6.3 which I optimised the build for Cortex-a8 and NEON.
Is compiled for performance not size (Optimize for size unticked)
Heap Randomisation is disabled.
Enabled SWAP - So you can use swap if you want to...
Default Scheduler changed to deadline, same as the Sony official kernel (still has bfq if you want to use it)
Default governor changed to ondemand.
CONFIG_OABI_COMPAT turned off. (This might break apps, haven't found any yet though)
Disabled CPUFreq Debugging.
Disabled FRAME_POINTERS, enabled STACK_UNWIND. Reason here: http://lists.openmoko.org/nabble.html#nabble-td6126708
There is no boot logo when this kernel boots. Each time I added one, the kernel refused to boot. I'll look at that. Just have patience, your phone is booting still...
(Here's where I make lots of stupid claims about how smooth, how buttery, how much battery life this kernel saves. Except I'm not a screaming idiot, so I'm not going to do that!)
I'm interested in any feedback you have, but I did this mostly for me.
And please remember the real person to thank, FXP. It's his source code I've used to build this. Also again thanks to Sirkay for his help and pointers.
Download it from here.
- muppet
Nice Kernel what's battery performance ??
aditya080908 said:
Nice Kernel what's battery performance ??
Click to expand...
Click to collapse
About the same as every other kernel.
OTG support? ?!
Sent from my ST18i
so good, This is what I looking for
@muppetmania attach here you png file. i can try to convert it to .rle for you
Could GB MIUI have the privilege?
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Anoopnk said:
OTG support? ?!
Click to expand...
Click to collapse
If you'd like me to respond to questions, please post an actual articulate question in the first place. Cheers.
Yes, I'm aware I'm a ****, it's been pointed out to me already
sirkay said:
@muppetmania attach here you png file. i can try to convert it to .rle for you
Click to expand...
Click to collapse
Thanks sirkay, but the problem isn't that I can't make a rle file, it's that the rle file when added to the ramdisk stops the kernel booting. It seems to a bug in the SEMC loader, I found a post about it somewhere. Does the boot.img need to be padded out to a certain size to work?
Sometimes my logo.rle would work, but then I'd make changes, recompile, and the kernel would hang on boot. Annoying, so I've removed it for the moment.
rivtre said:
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Click to expand...
Click to collapse
Hi rivtre,
I'd love to help, but my Ray is the only phone I have and is running CM7.2. While I could make a kernel for MIUI I'd have no (easy) way to test it. It wouldn't be fair to anyone if I started releasing untested things. So I'm sorry, it's not that I don't want to help, but no. Anyway, read the next bit to see why that's probably not a bad thing!
To All:
My kernel seems to be terrible when it comes to HD video recording. Can anyone else test this? I get heaps of dropped frames using my kernel when recording HD video vs a FXP Stock kernel. I need to look more at this, but for the moment I'd recommend not using this kernel!
v2 Released!
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
borg17a said:
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
Click to expand...
Click to collapse
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
I tried it, but It doesn't work. Booting failed
muppetmania said:
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
Click to expand...
Click to collapse
borg17a said:
I tried it, but It doesn't work. Booting failed
Click to expand...
Click to collapse
Oh well sorry. It's only for CM7.2
muppetmania said:
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
Click to expand...
Click to collapse
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Apocalyps2 said:
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Click to expand...
Click to collapse
Oh, well that's not the sort of feedback I wanted!
I haven't done much video recording the last couple of weeks (I've been away from work)
Let me do some testing and see what I can find...
Thanks for reporting
If you want a logcat I'll make one and get it to you , cheers
Sent from my ST18i using xda app-developers app
GPS
i just install your kernel on my phone...but why my GPS cannot running well
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
why your bug reporting so terrible
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
Update baseband to 75 or 77 ...reflash kernel !!!
Have fun !!
Sent from my ST18i