Hey guys, im a complete noob, and i keep getting "update aborted" when trying to flash cwm viu sd card on the galaxy ace. any ideas on what i should do?
are u sure u r flashing the right cwm?? cwm 5 is the latest and most recommended.....so did u follow these steps:
1.put cwm 5 in your sd card
2.go into recovery mode ( home+power)
3.click on "apply update from sd card"
4.navigate to the folder where cwm 5 is placed
5.install it
or are u facing a problem in the installation???
Proud to own an ANDROID
Prouder to be a part of XDA
yah i am, i get " error in /tmp/sideload/package.zip " and update aborted. dont know why.
maybe the file is not for your device or try to redownload the file
erkk_69 said:
yah i am, i get " error in /tmp/sideload/package.zip " and update aborted. dont know why.
Click to expand...
Click to collapse
try finding the rite file( cwm 5 optimised for ace) ..its there somewhere in the " sga themes and apps " section..maybe u r flashing the wrong file..i never faced that problem.....
Proud to own an ANDROID
Prouder to be a part of XDA
Related
Im currently using an early release of the original ics, but im trying to install the resurrection rom. i've copied the zip files to my sd card but when im in recovery mode trying to install it, it says E: signature verification failed, installation aborted.
how can i solve this problem? thanks
CWM
Yes, I've had the same problem as you and it's relatively simple to fix, before you choose "Install from sdcard" you'll be able to see an option called "toggle signature verification" after this is disabled you'll be able to flash happily
I'm trying to install a mod from the online kitchen but all i get is:
Error in /sdcard/mymod.zip
(Status 0)
Installation aborted
Even if i make an other rom, install an other version of CWM or SU or when I try to install it from the internal sd it gives me the same error.
I also tried to flash a different kernel, but no succes.
Any suggestions?
Flash a new CWM and Root kernel.
jje
you might have a corrupted download, redownload the mod.
tried both, didn't work... I also tried to rebuild the mod but still get the error.
I can flash other other zips through cwm...
keijers said:
tried both, didn't work... I also tried to rebuild the mod but still get the error.
I can flash other other zips through cwm...
Click to expand...
Click to collapse
strong suspect is your zip file containing the mod. did you try toggling signature verification?
Are you trying from Kitchen or from CWM..
Place on int.SD and flash manually from CWM,
if other files are flashed then definetely CWM is preventing you afrom a wrong flashing...
i've tried to change my batteryicons with this guide and that works:
http://forum.xda-developers.com/showthread.php?t=1434061
But i want to do it via the UOT kitchen, because i want the lockscreen mod too.
This is what i did:
I've uploaded framework-res, twframework-res, systemui and applied the battery mod and the lockscreen mod, nothing else. Then I clicked submit to kitchen, downloaded the zip and flashed it to my device throuw cwm, and i got error 0.
Should i try other scripting in UOT?
maybe i'm stupid but can it also be that i'm on stock rom (rooted) ics 4.0.3 xen lp7?
Hey,
If you check their official XDA Thread:
http://forum.xda-developers.com/showthread.php?t=990829
You will notice (In the second post: http://forum.xda-developers.com/showpost.php?p=12049814&postcount=2) that it is only compatible with Froyo/Gingerbread Roms.
You can't use it with ICS mate, and this is probably why you are getting the error while trying to flash it.
and what about this line:
Battery mod for ICS roms (NEW!)
i also tried to do the battery mod only, but still get the error
same problem with u
keijers said:
and what about this line:
Battery mod for ICS roms (NEW!)
i also tried to do the battery mod only, but still get the error
Click to expand...
Click to collapse
Even though this is the case all hints include that this is froyo/gingerbread only
Sent from my GT-I9100 using XDA
have you mounted your /system or /data ... ?
once had same problem, this fixed it
CJCord said:
have you mounted your /system or /data ... ?
once had same problem, this fixed it
Click to expand...
Click to collapse
Thank you CJCORD!. i was the same problem and i unmount the /system and install the su!
I'm having the same issue in JB, zip packages that i perfectly installed on GB can't be installed now because of the Status 0
simply go to Mount and Storage option, through CWM and unmount system and data.
Demsee said:
simply go to Mount and Storage option, through CWM and unmount system and data.
Click to expand...
Click to collapse
I can't unmount data, what can I do?
error in sdcard status 0 insatllation aborted pls solve it
am using viwepad 7 and i saw it can run ics.
i downloaded the rom and while verifying package it show error in sdcard status 0 installation aborted..
pls help me out to install ics on viewpad 7.
pls help me to solve this error...
raerosaine11 said:
am using viwepad 7 and i saw it can run ics.
i downloaded the rom and while verifying package it show error in sdcard status 0 installation aborted..
pls help me out to install ics on viewpad 7.
pls help me to solve this error...
Click to expand...
Click to collapse
Hello I am having the same problem, could you solve yours?
Please let me know how did you do.
Regards
Hello all. I just got my SE X10 befor i had a SE X8 i had i unlocked and flashed whit CWM to CM7.2. Now i wanted to instal Cyanogen Mod 7.2 on my new X10 but as far as i got was to root the phone whit SOC and instal xRecovery 0.3 GB whit the apk. Now my problem starts i cant install any ROM tryed several tutorials i found on xda but nothing helped. Getting this error:
E: Can't mount /dev/block/mmcblk-p1 (or /dev/block/mmcbkl0)
(Device or resource busy)
E: Can't mount /sdcard
Tried some how tos i found including deleting creating and chmoding the sdcard folder but nithing.
Whne i boot to xRecovery and go directly to mount mass storage device and connect the phone to the PC i hear a sound that a new device is connected but i dont see the SD card.
Is there a way to instal CWM on the X10 i know its not supported but some peaple managed to install it and works fine but cant finde any good tutorial.
click fix permissions to get root access to mount sd card
Jurasek88 said:
Hello all. I just got my SE X10 befor i had a SE X8 i had i unlocked and flashed whit CWM to CM7.2. Now i wanted to instal Cyanogen Mod 7.2 on my new X10 but as far as i got was to root the phone whit SOC and instal xRecovery 0.3 GB whit the apk. Now my problem starts i cant install any ROM tryed several tutorials i found on xda but nothing helped. Getting this error:
E: Can't mount /dev/block/mmcblk-p1 (or /dev/block/mmcbkl0)
(Device or resource busy)
E: Can't mount /sdcard
Tried some how tos i found including deleting creating and chmoding the sdcard folder but nithing.
Whne i boot to xRecovery and go directly to mount mass storage device and connect the phone to the PC i hear a sound that a new device is connected but i dont see the SD card.
Is there a way to instal CWM on the X10 i know its not supported but some peaple managed to install it and works fine but cant finde any good tutorial.
Click to expand...
Click to collapse
my man first of all open seus->support->update phone->repair phone written in red color->and then click next and choose ur phone and then do as it says....
this would install the stock rom and all and hopefully correct ur problem.... then here is the guide go here and u can intall any rom unlock bootloader and all....
http://forum.xda-developers.com/showthread.php?t=928343
if u get stuck anywhere always there to help mate
Devin-J: Tried that but got the same error
rohit25: Made that as well 2 times flashed stock FW whit SESU then ROOT whit SOC installed bussybox + xRecovery 0.3 apk but got the same error as mentiond befor
Just a quick one is it even posibel to instal Cyanogen Mod 7.2 whyt xRecovery ? tried to use this ROMs all whit same result
http://forum.xda-developers.com/showthread.php?t=911364
and
http://forum.xda-developers.com/showthread.php?t=1295089
perhaps im doing somthing wrong im wery new to x10 and never used xRecovery had CWM on my x10min and x8 usingi always MiniCM7
Jurasek88 said:
Devin-J: Tried that but got the same error
rohit25: Made that as well 2 times flashed stock FW whit SESU then ROOT whit SOC installed bussybox + xRecovery 0.3 apk but got the same error as mentiond befor
Just a quick one is it even posibel to instal Cyanogen Mod 7.2 whyt xRecovery ? tried to use this ROMs all whit same result
http://forum.xda-developers.com/showthread.php?t=911364
and
http://forum.xda-developers.com/showthread.php?t=1295089
perhaps im doing somthing wrong im wery new to x10 and never used xRecovery had CWM on my x10min and x8 usingi always MiniCM7
Click to expand...
Click to collapse
mate a friend of mine installed cm7.2 thru xrecovery so it works for sure...
again flash the kernel then boot to cwm recovery using flashtool and then wipe everthing cache partition dalvik cache factory reset nd all... then click install zip from sdcard....
also make sure you dont hae any password installed on the sdcrd wich cud be blocking access
rohit25: I didnot flash kernel for x10 BL shold be unlock but im not sure can i check it some how? Got the phone from a friend he did some tweeks but restored it fo factory whit SESU befor i got it. And can u give me a link for a cernel i need to use so that i cen get CWM an install MC7 ? I found a load of ROMs bud no kernel files and i dont know what kernel i need fot the x10. For the X8 a X10mini there was just one kernel from nAa so had no problems identifiing what kernel to use
Edit: And wold you be so kinde to give me some info on what rom do i download from CM http://fiberupload.com/users/jerpelea ? There are several folders whit several files i dont know which to use, what is the diferenc in them? an where do i get the FXP kernel adeqat to the rom i will download ?
Can anyone provide me whit the link for a FXP kernel i need to run the CM7.2 RC3 ? I found some links on the official cyanogen site but the links are dead and i dontk know what kernel ill need so that ill have CWM an i could install CM 7.2.
Jurasek88 said:
Hello all. I just got my SE X10 befor i had a SE X8 i had i unlocked and flashed whit CWM to CM7.2. Now i wanted to instal Cyanogen Mod 7.2 on my new X10 but as far as i got was to root the phone whit SOC and instal xRecovery 0.3 GB whit the apk. Now my problem starts i cant install any ROM tryed several tutorials i found on xda but nothing helped. Getting this error:
E: Can't mount /dev/block/mmcblk-p1 (or /dev/block/mmcbkl0)
(Device or resource busy)
E: Can't mount /sdcard
Tried some how tos i found including deleting creating and chmoding the sdcard folder but nithing.
Whne i boot to xRecovery and go directly to mount mass storage device and connect the phone to the PC i hear a sound that a new device is connected but i dont see the SD card.
Is there a way to instal CWM on the X10 i know its not supported but some peaple managed to install it and works fine but cant finde any good tutorial.
Click to expand...
Click to collapse
Hey, guy, download http://www.mediafire.com/?pnpvpg3cj4gvf0n,after that follow my step
1.rename xRecovery0.3_GBReady.zip to update.zip
2.BOOT INto xRecovery
3.choose install update.zip
4.Done!
After that u cn install whatever ROM u wan
Hope help
Superman™
Sent from my X10i using xda premium
Getting back the same error
E: Can't mount /dev/block/mmcblk-p1 (or /dev/block/mmcbkl0)
(Device or resource busy)
E: Can't mount /sdcard
Jurasek88 said:
Getting back the same error
E: Can't mount /dev/block/mmcblk-p1 (or /dev/block/mmcbkl0)
(Device or resource busy)
E: Can't mount /sdcard
Click to expand...
Click to collapse
After install update.zip from sd card, reboot it and reboot into xRecovery, try it
Hope help
Superman™
Sent from my X10i using xda premium
Remember, just put it in sd card, dn put in any file, then just rename it to update.zip, install update.zip in xRecovery
Sent from my X10i using xda premium
But the update.zip wont instal from xrecovery i get this error whit all zip files.. :-(
Sent from my X10 using xda app-developers app
Jurasek88 said:
But the update.zip wont instal from xrecovery i get this error whit all zip files.. :-(
Sent from my X10 using xda app-developers app
Click to expand...
Click to collapse
U try what i just gv u?? U have put it at sd card?
Sent from my X10i using xda premium
Hey, here is the file i have help u rename it to update.zip,
Just put in sdcard without any file putting, just outside sd card. Then flash it.
http://db.tt/38z1uNJD
Sent from my X10i using xda premium
Yes tok a empty SD card copyd the file renamed it to update.zim rebooted to xRecovery vent to update zip from sd and got the same error as a get all the time
Jurasek88 said:
Yes tok a empty SD card copyd the file renamed it to update.zim rebooted to xRecovery vent to update zip from sd and got the same error as a get all the time
Click to expand...
Click to collapse
Dn install it from custom.zip.....just it at the xRec main page n choose the 2nd or 3rd one cux i hv forgot which
Sent from my X10i using xda premium
Yes thats what i did but getting the error all the time no mather how i install the update.zip
Jurasek88 said:
Yes thats what i did but getting the error all the time no mather how i install the update.zip
Click to expand...
Click to collapse
Ermmmm, i think the other way just reinstall xRecovery, after that follow my step
Sent from my X10i using xda premium
Look for here http://forum.xda-developers.com/showthread.php?t=859571
Sent from my X10i using xda premium
As i told befor i restored the phone whit SESU 2time ROOTed it instaled xRecovery and evry time i got the same error dont think a third restor will help but ill try later on will update if it helps but im confident it will give me the same error as befor...
HI
Sorry if i am in the wrong section to post. If I am, please move to a more convenient group.
I made a custom Rom in the android kitchen. Everything went through well, no problems at all. then when I try to install to my phone, it wont install and I get these errors:
One error I got while installing was: Installation Abored: Status 6.
Now I get this error white installing: E:Cant open /sdcard/primou_signed_031613_094637.zip (bad) Installation aborted.
Whats going on because I havent changed/converted any update scripts just added an apk then zip aligned it. The original roms install ok, but my own dont install when everything is set the same.
please help me. THANKS
I can upload my two custom roms for you to have a look to see if you can make sense of it. it is for HTC ONE V gsm.
antwonpjmj said:
HI
Sorry if i am in the wrong section to post. If I am, please move to a more convenient group.
I made a custom Rom in the android kitchen. Everything went through well, no problems at all. then when I try to install to my phone, it wont install and I get these errors:
One error I got while installing was: Installation Abored: Status 6.
Now I get this error white installing: E:Cant open /sdcard/primou_signed_031613_094637.zip (bad) Installation aborted.
Whats going on because I havent changed/converted any update scripts just added an apk then zip aligned it. The original roms install ok, but my own dont install when everything is set the same.
please help me. THANKS
I can upload my two custom roms for you to have a look to see if you can make sense of it. it is for HTC ONE V gsm.
Click to expand...
Click to collapse
These are the errors cause by updater script nd update binary.!
Status 6 error in cwm is because u didn't edit ur updated script correctly
Sent from my A2 using xda app-developers app
qmobilea2 said:
These are the errors cause by updater script nd update binary.!
Status 6 error in cwm is because u didn't edit ur updated script correctly
Sent from my A2 using xda app-developers app
Click to expand...
Click to collapse
To add apk's to a rom, you can add them but do not unzip the rom, just add them to the archive, let me know how it goes
I think status 6 is when you corrupt the updater-script. What did you use to update the script? I use EditPad lite.
Hello everyone a month ago I install a rum cyanogenmod m8 from my recovery in Zip install option but yesterday I wanted to try installing slimkat with a clean install wiping everything in internal memory but to go back to the install zip option and try install from sd memory I went out a next mistake
-- Installing: /sdcard/Rom.zip
Finding update package...
Opening update package...
E: Can't open /data/media/0/Rom.zip
(bad)
Installation aborted.
this happened to me after I delete all data from the phone doing a mega wipe with a zip file but my big problem is that after I could no longer install from sd and my only option to revive my phone was installed by the stock version odin but I do not like the stock so I want to install Cyanogenmod SlimKat or 11 M8 but I can not for the problem that gives me the recovery.
it gives me another error is also:
e: error mounting / system!
e: can not open sdcard
someone help me?
PS: try the 3 types of recovery as I know cwm, TWRP, and Philz but three recoverys not allow me to install any zip file
PD2: The sdcard refers to the internal memory and because of this error can not enter or see what interda q in my memory from the recovery but also tried d install an external memory and nothing
Alvarogb91 said:
Hello everyone a month ago I install a rum cyanogenmod m8 from my recovery in Zip install option but yesterday I wanted to try installing slimkat with a clean install wiping everything in internal memory but to go back to the install zip option and try install from sd memory I went out a next mistake
- Installing: / storage/sdcard1/Rom.zip
Finding update package ...
Opening update package ...
E: Can not open / storage/sdcard1/Rom.zip
(bad)
Installation aborted.
this happened to me after I delete all data from the phone doing a mega wipe with a zip file but my big problem is that after I could no longer install from sd and my only option to revive my phone was installed by the stock version odin but I do not like the stock so I want to install Cyanogenmod SlimKat or 11 M8 but I can not for the problem that gives me the recovery.
it gives me another error is also:
e: error mounting / system!
e: can not open sdcard
someone help me?
PS: try the 3 types of recovery as I know cwm, TWRP, and Philz but three recoverys not allow me to install any zip file
PD2: The sdcard refers to the internal memory and because of this error can not enter or see what interda q in my memory from the recovery but also tried d install an external memory and nothing
Click to expand...
Click to collapse
you must update your recovery..
that's the usually mesage when you are not up to date whit your recovery
best regards
necrosauron said:
you must update your recovery..
that's the usually mesage when you are not up to date whit your recovery
best regards
Click to expand...
Click to collapse
I installed the new version of recovery but I have the same problem
Alvarogb91 said:
I installed the new version of recovery but I have the same problem
Click to expand...
Click to collapse
mmm maybe your download was wrong...
try to download again the file...sometime happens
regards
necrosauron said:
mmm maybe your download was wrong...
try to download again the file...sometime happens
regards
Click to expand...
Click to collapse
Thanks the file was the problem, I have download again the file and the install was succesfull.
Alvarogb91 said:
Thanks the file was the problem, I have download again the file and the install was succesfull.
Click to expand...
Click to collapse
ok bro...glad to help you...:laugh:
hit the thanks button for the next time..
regards:good: