I recently soft bricked my SGSII after trying to update firmware using Odin. The phone was rooted and i had an ICS rom which was working fine, but i wanted to restore my apps and contacts that i lost when i installed the rom.
Anyway, i couldnt fix it myself no matter what i tried so i sent it away to get JTAG repaired and now its back to normal. When i got it back, it was running XWKK5 firmware which wasnt the original.
Anyway, when i plug the phone in, Kies recognises it and works fine, but in the firmware section, it says "Your device does not support software upgrading via Kies".
My carrier (Optus Australia) should be releasing the official ICS update in the next few weeks and i really want it but it appears Kies wont do it. Is there any way to work around it. After my previous experience i'd rather not have to use Odin if i dont have to.
Any help would be greatly appreciated.
ok, first of all, obviously, you don't need kies to get that ics rom, because whenever it will be pushed to the users, it will already be available for flashing with odin. so there is absolutely no need for you to get your phone to work with kies again.
also, one might mention that you clearly know, this is a question, as you marked it with [Q], however, failed to post in the Q&A section, but don't worry about it. i reported it, so it will be moved in the correct section.
what i am really interested in, is your pre story:
you soft bricked your phone? then you say it was working fine but you wanted to restore contacts and sent it out for jtag repair? i'm sorry, but that does not make any sense to me, do you maybe want to shed some light on that? if you asked on xda first, some expensive repairs might become obsolete, such as an apparent "jtag contact restore".
Chef_Tony said:
ok, first of all, obviously, you don't need kies to get that ics rom, because whenever it will be pushed to the users, it will already be available for flashing with odin. so there is absolutely no need for you to get your phone to work with kies again.
also, one might mention that you clearly know, this is a question, as you marked it with [Q], however, failed to post in the Q&A section, but don't worry about it. i reported it, so it will be moved in the correct section.
what i am really interested in, is your pre story:
you soft bricked your phone? then you say it was working fine but you wanted to restore contacts and sent it out for jtag repair? i'm sorry, but that does not make any sense to me, do you maybe want to shed some light on that? if you asked on xda first, some expensive repairs might become obsolete, such as an apparent "jtag contact restore".
Click to expand...
Click to collapse
sorry about the lack of clarity with that. i rooted the phone and installed the ics rom. it was working fine but i couldnt restore my apps, contacts etc from the backup i made so i decided to go back to the stock gingerbread. i got the firmware, flashed it with odin, but it crashed halfway through and the phone wouldnt work. i could get to download mode but when i tried to flash other firmware or do other things to fix it that people on xda told me, they didnt work.
after trying everything, then i sent it for the JTAG.
like i said, i dont really want to have to use odin, i'd rather use kies. is there a way to do that or do i have to use odin?
oh, ok, that explains it.
unfortunately, you will have to flash the device through odin at least once more to get to the point, where it will be recognized by kies again. apparently, your current rom kk5 is not meant for your device (your carrier, your region etc.) so you will have to find a rom, you are certain, is available for you and contains your csc.
then download it from intratec's official rom thread or samfirmware and flash it through odin, following the procedure exactly. if you flashed an XW or XX rom, make sure to change the csc to your original one after flashing, enter *#272*yourIMEI# and select your original csc, your device will be wiped in that step.
after that, kies will eventually (it might take a few days and a few connection attempts) recognize your device again and offer you the update to the latest version for your region.
if it doesn't and gives a specific error message, you should use the forum search with that error message. there have been a lot of threads regarding updating through kies and phones not being recognized, but first you should bring your phone back to stock conditions, so kies has a chance of getting it.
Chef_Tony said:
oh, ok, that explains it.
unfortunately, you will have to flash the device through odin at least once more to get to the point, where it will be recognized by kies again. apparently, your current rom kk5 is not meant for your device (your carrier, your region etc.) so you will have to find a rom, you are certain, is available for you and contains your csc.
then download it from intratec's official rom thread or samfirmware and flash it through odin, following the procedure exactly. if you flashed an XW or XX rom, make sure to change the csc to your original one after flashing, enter *#272*yourIMEI# and select your original csc, your device will be wiped in that step.
after that, kies will eventually (it might take a few days and a few connection attempts) recognize your device again and offer you the update to the latest version for your region.
if it doesn't and gives a specific error message, you should use the forum search with that error message. there have been a lot of threads regarding updating through kies and phones not being recognized, but first you should bring your phone back to stock conditions, so kies has a chance of getting it.
Click to expand...
Click to collapse
ok, thanks for that advice, i'll look around
this is 4th person im reading today who want to backup / restore contacts.......
guys even if you dont use gmail its not hard to make a account and let it sync which is auto and all your contacts are now saved on google, so whenever you factory reset or new ROM, signin in will get you youe contacts....
Related
I am trying to upgrade my samsung galaxy S with kies.
But it stuck when "preparing firmware upgrade components..."
after that nothing happends for hours.
Can someone help me with this?
Kies Mini is junk, IMO. I recommend scouring the forums for your preferred update files (PIT, TAR, and the proper Odin version).
Also, if you want help with this you'll need to post more information -- like your model of phone, carrier, etc.
Seriously, I've been using Odin 3 v1.85 with a lot of success. I had quite a bit of trouble with all the "one-key" rooting programs, tried Odin and got everything working the first time... Well... the first time after switching out my cable. (don't use the stock USB cable for flashing. Pop the extra cash for a decent name brand cable)
Also, don't freak out if you can't get the phone working properly after messing it up with Kies. As long as you can get the "download mode" up and running, you should be able to flash with Odin and fix everything.
ii Candor ii said:
Kies Mini is junk, IMO. I recommend scouring the forums for your preferred update files (PIT, TAR, and the proper Odin version).
Also, if you want help with this you'll need to post more information -- like your model of phone, carrier, etc.
Click to expand...
Click to collapse
I like to update with KIES because I need to put the phone on service so I need original ROM.
First I uploaded android 2.1 from samfirmware and can't upgdare, after I put android 2.2 and it is the same.. even If I use spooffw program.
Phone is Samsung galaxy S and I need version of program with MOT.
I tryed to upgrade in 2 computers but always is the same
"preparing firmware upgrade components..."
after that nothing happends
what if you try updating to 2.3.3 and then use spoof fw to set it to MOT?
I took a look at samfirmware, i'm not sure if there's the right version.
did you make a backup of your stock rom, after having rooted?
geri.st said:
what if you try updating to 2.3.3 and then use spoof fw to set it to MOT?
I took a look at samfirmware, i'm not sure if there's the right version.
did you make a backup of your stock rom, after having rooted?
Click to expand...
Click to collapse
I am almost soure that samfirmware doesn't have right version.
I didn't make backup. My friend have the same phone can I backup his ROM and restore on my phone?
I use spooffw and already set it to MOT but stil can't upgrade.
does he have a stock phone? nothing done yet? which android version!
if it is below or equal 2.2.1 u should be able to root it with superoneclick http://forum.xda-developers.com/showthread.php?t=803682
then you can install rom manager from market, make a backup of his rom, and restore it on your phone.
i think this could work
I think it is below 2.2.1
I will check and try.
Is there a way that people see on service that I have rooted my phone before?
If you manage to unroot it and flash stock kernel and rom...which your friend should have, they won't!
Sent from my GT-I9000 using XDA App
geri.st said:
If you manage to unroot it and flash stock kernel and rom...which your friend should have, they won't!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
What about some counter which count installed ROMS
Never heard about that before.
maybe. You should google that
Sent from my GT-I9000 using XDA App
it exist only on sgs2 but it's easy to reset using the USB dongle.
To counter-act the counter, look on Ebay for a Samsung Galaxy "Jig". Make sure your model is specifically supported. It will reset the ROM counter to 0 and put the phone into download mode. (And it will restore almost any kind of bricked Galaxy S)
Please board members, correct me if I'm wrong, but using Odin vs Kies doesn't affect the ROM install. That is to say, a tech looking at the phone's data files couldn't tell if it was Odin or Kies that was used for the flash.
Look up your exact phone in the forums, go to the development subsection, look for a subject heading that says "[Odin]" and "[Stock]" that doesn't also have other ROM modifications such as "[rooted]" or [ext4].
Hi there can't post in Development so here will have to do...
Ex SE Satio user moved over to android SGS2 and got one late last year from CPW (Car Phone Warehouse), Unlocked and with cpw stock firmware, I think it was XEU or one of the general ones, I rooted it using odin and was happy as larry, until the proximity chip failed, so I rehashed it back to Out Of Box and sent it back.
Great Then then sent it back with a different firmware, I'm still getting my head together with this but I'm sure I cant find it? and there is hardly anything online about it.
PDA:I9100XWKD6
PHONE:I9100XXKDA
CSC:I9100CPWKD1
18/4/11
I wan't to root my phone, but can't find anything about, I could flash a different ROM on but then I wouldn,t be able to Back up if the hardware fails.
Thank You
leeackky said:
Hi there can't post in Development so here will have to do...
Ex SE Satio user moved over to android SGS2 and got one late last year from CPW (Car Phone Warehouse), Unlocked and with cpw stock firmware, I think it was XEU or one of the general ones, I rooted it using odin and was happy as larry, until the proximity chip failed, so I rehashed it back to Out Of Box and sent it back.
Great Then then sent it back with a different firmware, I'm still getting my head together with this but I'm sure I cant find it? and there is hardly anything online about it.
PDA:I9100XWKD6
PHONE:I9100XXKDA
CSC:I9100CPWKD1
18/4/11
I wan't to root my phone, but can't find anything about, I could flash a different ROM on but then I wouldn,t be able to Back up if the hardware fails.
Thank You
Click to expand...
Click to collapse
I also failed to state that its...
2.3.3 and Kies say's "THERE WILL BE NO MORE UPDATES FOR THS PHONE."
???
Well if you want to root flash a cf root kernel via odin from the original development thread.
Also check out infratechs thread to see if he has this firmware there incase you need to revert back, once rooted just make a backup via CWM either via recovery mode or using the CWM app that comes with cf root.
Sent from my GT-I9100 using Tapatalk
Hi mate and Thank You for your quick reply. I've scoured the threads and the closest I've found is..
XWKDD
Firmware info
PDA:XWKDD
PHONE: XXKDH
Build date: 26/04/2011
Generic XEU
But I thought that when you rooted your device it had to be identical, I could flash Ice Cream, but then I wouldn't have anything to back up to if my device blobs?
O2 say's I shouldn't have this firmware and so does Samsung, Kies actually said..
"Your device does not support software upgrading via kies"
I's that odd?
Don't worry about it, if you've got an o2 model just flash the latest UK firmware for o2, again in infratechs thread or maybe sammobile. You can flash o2s CSC anyway that will give you back the splash screen and such.
For now if you want to root, cf root is the easiest then flash away using CWM any of the plethora of roms available.
I suggest you flash a stock rom from Infratechs thread so you can update to the latest if you want LA2, then use CF Root to root. Then if you want ICS just flash that via CWM.
You can also use Checkfus (search on here) to find/download the latest firmware for your phone/carrier.
leeackky said:
=
O2 say's I shouldn't have this firmware and so does Samsung, Kies actually said..
"
PDA:I9100XWKD6
PHONE:I9100XXKDA
CSC:I9100CPWKD1
Its not O2 firmware its CPW firmware CPW is the clue
KD was a very very old firmware May 2011
What has the firmware to do with O2 its not an O2 phone .
UPGRADE CHOICES
One ask CPW service for an upgrade
Two wait for KIES upgrade if CPW upgrade KIES .
Their should be a CPW firmware and most definitely an O2 Firmware in the branded providers rom section .Or via CheckFus that should give you a backup of whats on the phone .
Carrier branded .
http://forum.xda-developers.com/showthread.php?t=1113928
or flash a stock 2.3.5 or 2.3.6 XEU from the stock roms thread
jje
Click to expand...
Click to collapse
As you said JJe, it is a CPW rom, and I knew it was an old one, but it's odd that CPW are sending refurb phones out with such an old ROM on it. I've decided to bite the bullet and go with the original ROM that I got with my first phone...
Product Code: GT-I9100LKACPW
Version: Android 2.3.3
HIDSWVER: I9100XWKE7/I9100CPWKD1/I9100XXKE4/I9100XWKE7
Bypassing this and going for...
I9100XWKI4/I9100CPWKH1/I9100XXKI1/I9100XWKI4 (2.3.4)
This is the original firmware plus KIES update to 2.3.4! I know that CPW were sending NEW phones out with this, so this will have to be my BackUp If my hardware blobs.
I'ts a shame I couldn't find the original ROM/Kernel. Checkfus did come in handy after all.
Many thanks for your help and patience you 3.
Now I just got to cope with FBI shutting down MEGAupload, as most of the Rom's etc reside there.
hey ya, lets say someone i know (wink ;D) is employee at carphone warehouse, and to tell you a fact, the repair centres tend to care very little if youve changed the firmware, at most they will charge you £10 to 'upgrade' the software to the latest official release, if you cant find it, i really wouldnt worry to much, most staff dont even realise what the yellow non stock firmware triangle is, though i would be sure to get rid of it just incase you get one clever clogs but for the most part, no big worry really
Just my luck flashed new ROM and i'm gettin "The process.com.android.phone has stopped unexpectedly. Please try again" every 5 minutes when i'm navigating through menus and that.
leeackky said:
Just my luck flashed new ROM and i'm gettin "The process.com.android.phone has stopped unexpectedly. Please try again" every 5 minutes when i'm navigating through menus and that.
Click to expand...
Click to collapse
Make sure you have wiped data/cache and dalvik cache via recovery (If you have CWM recovery) otherwise pick a rom from the stock rom thread that says wipe, flash it via odin, then flash the new rom you want.
Just my luck flashed new ROM and i'm gettin "The process.com.android.phone has stopped unexpectedly. Please try again" every 5 minutes when i'm navigating through menus and that.
Turns out that it's incompatible with my sim card, the phone works fine when I remove it, but as soon as I put my sim back in I get the same error?
CF-rooted fine,CWM etc ok, but still this error, might have to try another ROM
Sussed It!
Flashed to XXI1, then flashed the CF-Root Kernel and wiped it, looked like veyka, it was my Backup that I was Restoring, because now it works fine with the SIM card, something from the Backup from that ROM was incompatible with XXI1!
Got just a DATA backup on CWM from main backup, will see what I can restore safely!
Got Yellow Triangle, no Jig. will try SuperOneClick method
Trial and error eh?
Thank you again. (buttons pressed.)
After a day and a half of trouble and stress using Kies, I wonder if there is anyway of getting the stock AT&T ICS ROM (the one that I would get if I upgrade using Kies) without using Kies, like downloading and flashing in ODIN or some other method. Because using Kies is impossible.
Bump I really, really need this. I won't be able to update for weeks or a month if not.
also, when Kies recognizes it (1 in 1000 times) it says "Your device does not support software upgrading via Kies". I am unrooted and on stock rom.
http://forum.xda-developers.com/showthread.php?t=1763634 first link in post #5 unzip and place in pda slot in odin
or you could just root your phone and flash an ICS rom
XDA is no longer worth my time.
TimOster said:
OK, try Kies one more time. FIRST uninstall and reinstall the Samsung Mobile Device Driver. Just to be sure since you seem to be having connection problems.
Then...
Put Note into Download mode with no USB connected.
Start Kies (must be latest version ....12064_9...)
Plug in the USB (Note and PC)
Select > Tools > Firmware Upgrade and Initialization
THIS WIPES YOUR PHONE! But when it completes you are at the latest FW, currently ICS. It WILL do it even if Kies never says it connected first. I did this with my soft bricked Note that wouldn't boot completely.
Click to expand...
Click to collapse
Fixed, had tried that 10 times, but tried on another computer and it worked.
Also, now how to root and keep stock? Pref. A stock kernel. Or rerouted kernel. Or the easiest way
Is there a light at the end of the tunnel for me?
Buddy39914 said:
After a day and a half of trouble and stress using Kies, I wonder if there is anyway of getting the stock AT&T ICS ROM (the one that I would get if I upgrade using Kies) without using Kies, like downloading and flashing in ODIN or some other method. Because using Kies is impossible.
Click to expand...
Click to collapse
I have been trying to outsmart Samsung Kies since the update came out. I could not wait, like many of you guys, and decided to try out some custom ROMs, so I was not allowed to download the update because of the firmware message. I've downgraded to stock Gingerbread ROM, reset the binary flash counter, and wiped all the data on my phone, yet it is not enough.
When i did the *#1234# thing, I got PDA: I717UCLA1 (which was the same code as my CSC before I reset the flash counter), Phone: I717UCLC5 (the last ROM I was on), and CSC: I717ATTLA1 (what I think I need them all to be).
Since there has only been one official firmware version, 2.3.6, aside from the ICS I want, I can't make my phone think I have only been on stock firmware for the past two flashes. I'm totally screwed unless someone makes the Kies version flash-able through ODIN or tells me I'm an idiot and hands me the solution to cracking Kies on a silver platter!
Do the method that If you open Kies then go to Tools then Firmware upgrade & initialization, it asks for two pieces of info about the phone. The S/N & model number. Enter them exactly as is (back of the phone behind the battery) use SGH-I717 as model (capital letters). Worked for me. If it doesn't, try on another pc.
Also, now signal seems a lot weaker, fix?
You guys know how much easier it would have been to just to flash clockwork recovery mod right? You could download and flash roms without a computer or USB cord all day.
Sent from my SAMSUNG-SGH-I717 using xda premium
Buddy39914 said:
Do the method that If you open Kies then go to Tools then Firmware upgrade & initialization, it asks for two pieces of info about the phone. The S/N & model number. Enter them exactly as is (back of the phone behind the battery) use SGH-I717 as model (capital letters). Worked for me. If it doesn't, try on another pc.
Also, now signal seems a lot weaker, fix?
Click to expand...
Click to collapse
I'm on a Mac and when i click on Tools, i get this: Emergency firmware recovery, Firmware upgrade settings, and Install driver
When i go to Firmware upgrade settings, i see a blank box. I feel like the Kies update itself didn't work properly because it goes to 100%, asks for my computer password, then just freezes there until i click cancel at the bottom.
Help.
I went to software update and there is a 197mb update on my phone then i started to download and it downloaded just fine but after rebooting it is failed always at 12% and meesage comes up " update through kies or contact samsung"... on kies there is no update.
My phone is not rooted.S II I9100 from KSA.
anyone?
This is what exactly going on
http://www.youtube.com/watch?v=gHkU_57zmlM&feature=player_embedded
Assuming you're running stock & have never messed with (rooted/run non stock firmware) the phone, try a factory reset/wipe in the first instance (boot into recovery), then try the update again.
You could flash a stock ICS rom manually with Odin, but be aware if you bork it in the process (very unlikely/small risk, but still a risk nonetheless), you'll likely not get it fixed under warranty. Get the PC version of Checkfus if you want to go down this route (search for it on here/Google), this will enable you to download the update manually, then flash it following the instructions here.
Ton need at least 40% to install an update.
MistahBungle said:
Assuming you're running stock & have never messed with (rooted/run non stock firmware) the phone, try a factory reset/wipe in the first instance (boot into recovery), then try the update again.
Click to expand...
Click to collapse
actually i have rooted my phone before 2 months but now it is not rooted... i just want to install official ICS using kies or through OTA ...don't want to root again.
Then take your pick. Do the reset & try it again (make sure you've got at least 40% battery; I think that's what JT meant), or do it manually with Odin. Or try the first option, then the 2nd one.
Up to you.
Also, if you can't find the firmware you need with Checkfus, search Samfirmware or here
Edit after your edit - In that case definitely the first option. If it doesn't work & you don't want to do it manually, take it to a Samsung service centre & ask them to put the latest firmware on it for you.
MistahBungle said:
Then take your pick. Do the reset & try it again (make sure you've got at least 40% battery; I think that's what JT meant), or do it manually with Odin. Or try the first option, then the 2nd one.
Up to you.
Also, if you can't find the firmware you need with Checkfus, search Samfirmware or here
Edit after your edit - In that case definitely the first option. If it doesn't work & you don't want to do it manually, take it to a Samsung service centre & ask them to put the latest firmware on it for you.
Click to expand...
Click to collapse
Ok, after reseting there is no update available on my phone when i try to update using phone.
OK. Have you ever flashed any other stock firmware on the phone ? I have two theories about this 'upgrade' - one; if you've flashed stock firmware for other regions on your phone, there's may be some issue with the CSC (even if you're currently running correct firmware for your region) preventing you from getting OTA updates successfully. Also, the update you saw may have been not for your region, because your CSC is messed up , it may have tried to pull an update for the region whose firmware you had on the phone previously. And when you did a reset it might have somehow fixed the issue with the CSC, and there is no update for your region. Conjecture, but hard to know exactly without knowing the history of the phone & exactly what you've done it.
Two; the size of the update sounds a bit strange. I would have thought it would be bigger than 197MB. Even zipped, I have a carrier branded ICS firmware and it's huge (>700MB). That you were able to download it, yet there was nothing on Kies is really strange.
Go into settings/about phone & tell me all the details you have in there. Also tell me everything you've done with the phone since you got it so far as rooting/flashing other firmware goes (details of kernels, roms, etc). And we'll see if we can shed a bit more light on things.
And one other thing, in your last post you say there's no update on the phone, have you checked Kies again. If not, have a look.
MistahBungle said:
it may have tried to pull an update for the region whose firmware you had on the phone previously. And when you did a reset it might have somehow fixed the issue with the CSC, and there is no update for your region. Conjecture
Click to expand...
Click to collapse
This might be true
Go into settings/about phone & tell me all the details you have in there
Click to expand...
Click to collapse
.
I bought S2 from Saudi Arabia.
baseband version: I9100XXKI4
Kernal Version: 2.6.35.7-I9100JPKJ2-CL655700 [email protected] #2
GBuild Number: GINGERBREAD.JPKJ2
]Also tell me everything you've done with the phone since you got it so far as rooting/flashing other firmware goes (details of kernels, roms, etc). And we'll see if we can shed a bit more light on things.
Click to expand...
Click to collapse
I have used this guide for rooting http://androidforums.com/galaxy-s2-...t/482994-rooting-galaxy-s2-dummies-guide.html
but after trying 5 or 6 custom ROMS i just unroot my phone.
And one other thing, in your last post you say there's no update on the phone, have you checked Kies again. If not, have a look.
Click to expand...
Click to collapse
no update on kies either.
I have also used this method toinstall official stock firmware http://www.technetinfo.in/mobile/mobile-software/stock-gingerbread.html
let me quote my own message while i was having problem with CSC.
k i did factory reset and wipe all data now it doesn't show "that device doest not support software upgrading via KIES" but firmware info is totally different now, it is suppose to be (KSA) not (XSG).
Click to expand...
Click to collapse
one thing more i would like to mention here is that before rooting....KIES showing
PDA:KJ2 / PHONE:KI4: / CSC KJ1 (KSA)
now it's showing
PDA:KJ2 / PHONE:KI4: / CSC KJ1 (XSG)
Click to expand...
Click to collapse
FIXED BY CHANGING CSC CODE
OK. Given all that, then it's obviously a CSC issue. Which means either it showed an update was available for the wrong region, and now that CSC issue has been resolved. Or there is an update for your region but your CSC is messed up so it can't get the update.
I've had a look at Checkfus, and the stock rom you're currently running is the latest for Saudi Arabia (GT-I9100LKAKSA -I9100JPKJ2/I9100OJPKJ1/I9100XXKI4/I9100JPKJ2) which was released on 25/10/2011.
So I'd say that update you saw was for another region, and the factory reset you did fixed whatever issue there was. There are no updates for your region, put it that way.
Edit - Unless it's some kind of minor carrier specific update ? That could explain the relatively small size of the one you saw. I guess you could find this out by contacting your carrier.
Thanks a lot MistahBungle, i really appreciate your help.
Now i have changed my CSC code from (KSA) to (JED) and now i'm getting official update from kies. Just curious about changing CSC, is there any negative effect on my phone in future by just changing CSC code?
Given you're getting OTA updates OK, probably not. Normally if you change your CSC to a different region, you often have problems getting OTA firmware updates. If it's working for you, it's obviously fine.
MistahBungle said:
Given you're getting OTA updates OK, probably not. Normally if you change your CSC to a different region, you often have problems getting OTA firmware updates. If it's working for you, it's obviously fine.
Click to expand...
Click to collapse
not sure about OTA but on KIES it is showing my firmware info correctly, i mean i can get updates through KIES without any issues.
suppose if i want to change my CSC back to original one (KSA) then what will happen?
As long as you can get it via Kies you're set. And even if you couldn't, it's simple to download the firmware with Checkfus & flash it via Odin. That's what I'd do if I were on rooted stock, for example (but I probably wouldn't be in any event).
I don't know. Try it & find out. Yes, I'm serious. I hate stock firmware, it's rubbish, and haven't run it since the first week I got my phone. So I honestly don't know.
Hey all,
Had my S3 for about 10months.
HANDSET DETAILS:
* Unlocked GT-i9300 (running GiffGaff sim)
* 16GB White, running Stock Touch-Wizzed ICS 4.0.4
* Baseband: I9300BVLE4
* Kernel Ver: 3.0.15-554502-user
[email protected]#1
SMP PREEMPT Sun May 13 11:40:33 KST 2012
* Build Number: IMM76D.I9300BVALE4
WHAT I'M TRYING TO DO:
I am not trying to root this phone (YET!), I am just trying to use Kies to upgrade to JB.
All the 'legal information' in the Settings menu is 'greyed out'. I cannot select, or update OTA.
I will probably get to the CM / custom ROMs sometime but for now I just thought I'd do a simple (I thought) easy upgrade to JB.
Kies recognises the phone, suggests I do a back-up (which I did), and then attempts to download a 3000mb install package. At this point, it throws up a dialog box showing a bunch of 'square characters' - the kind of thing you see if you don't have a language installed on your OS. (which is XP by the way).
It's an error for sure, as after closing it (OK is the only option), the download process loops as it asks me again 'do I want to backup before upgrade'. So I'm getting nowhere.
I'm not sure why Kies has such a problem with my phone.
If it's any use, I can say that this was bought brand-new, unlocked, from a retailer website, though upon boot it displays an Orange logo, and certain parts of the menus (although very few) were in French by default. I've registered the phone with Samsung on their site successfully so that's fine. I put in a QUERY for them to help but it's been over a month and nothing back so far.
So I thought I would come to the expert village and see if I can get some help.
-I'm hoping it's okay to ask about Official updating here and not completely boring ( ! ) as I'm aware this is a land of great rootery and customisation! which I think is great by the way :good:
Thanks to anyone that can help!
regards,
SkEvol (newbie)
Have a look in the stickies about how to use ODIN (its not difficult to use).
Then, I would advise you flash the latest official Samsung firmware from here - http://forum.xda-developers.com/showthread.php?t=1646610
Ensure you follow the ODIN instructions properly and make sure Kies isn't running when you use ODIN.
This will get you onto the latest version of JB to be released by Samsung...
mikep99 said:
Have a look in the stickies about how to use ODIN (its not difficult to use).
Then, I would advise you flash the latest official Samsung firmware from here - http://forum.xda-developers.com/showthread.php?t=1646610
Ensure you follow the ODIN instructions properly and make sure Kies isn't running when you use ODIN.
This will get you onto the latest version of JB to be released by Samsung...
Click to expand...
Click to collapse
Hi there Mike,
Thanks for the reply, while I'm quite happy to use some ODIN to do this (I don't mind a learning curve), I'm just a bit put off by the disclaimer "Using ODIN can change your bootloader to show that the system is MODIFIED and may increase your ODIN flash count. This may void your Warrenty".
-my phone is still under warranty and I would rather avoid breaking the warranty if at all possible.
Are there any other options?
SkEvol said:
Hi there Mike,
Thanks for the reply, while I'm quite happy to use some ODIN to do this (I don't mind a learning curve), I'm just a bit put off by the disclaimer "Using ODIN can change your bootloader to show that the system is MODIFIED and may increase your ODIN flash count. This may void your Warrenty".
-my phone is still under warranty and I would rather avoid breaking the warranty if at all possible.
Are there any other options?
Click to expand...
Click to collapse
I wouldn't worry about that tbh.
As your phone hasn't been rooted it shouldn't be an issue.
Also, there are ways to change the system flag back to 'official' using Triangle Away but I don't think you'll need to.
Sent from my GT-I9300 using xda app-developers app
mikep99 said:
I wouldn't worry about that tbh.
As your phone hasn't been rooted it shouldn't be an issue.
Also, there are ways to change the system flag back to 'official' using Triangle Away but I don't think you'll need to.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks again Mike,
I'm going to use ODIN to update to Samsung's official I9300XXEMD2_I9300OXXEMD1_I9300XXEMC2_XEO.zip ROM.
I'm already using the Stock ICS which came with the phone (brand new, but unlocked). So essentially I'll just be updating to a new version of an official ROM from Samsung.
I have already taken steps using KIES, to backup the call logs, SMS's, contacts, and APPS.
These are all items which are stored on the internal 16GB (I believe) please correct me if I'm wrong?
I would like to ask:
1) Will this ODIN flashing process effect any data on my external SD card? (I obviously don't want to lose any of it)
2) And, will I be able to use KIES afterwards, to return all my old data (ie app settings, the APPS themselves, call logs, SMS's, contacts etc) to the phone's 16GB memory?
Hopefully simple questions :fingers-crossed:
Thanks again.
The ODIN process doesn't wipe your phone as far as I can remember so everything should still be there (downloaded apps, SMS, call log etc).
Hopefully someone else can clarify this who has used it recently...
Sent from my GT-I9300 using xda app-developers app
mikep99 said:
The ODIN process doesn't wipe your phone as far as I can remember so everything should still be there (downloaded apps, SMS, call log etc).
Hopefully someone else can clarify this who has used it recently...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for heading me in Odin's direction
I haven't gotten round to doing the update yet.. and considering just hanging on until samsung release their official 'non-leaked' JB s3 update.
I'm still in the dark as to why my update options / legal information are greyed out though..
Does anyone know why?
I'm still in the dark as to why my update options / legal information are greyed out though..
Does anyone know why?
usual reason is a mismatch in the phone codes shown to KIES .
Orange logo means its an Orange phone and based upon the OP i would suggest that its an Orange France phone originally . It may have had firmware modifications or been a return phone or even a grey import .That would explain wrong codes no update path .
jje
'Mismatch in phone codes shown to Kies'
Are you saying Kies is expecting a certain code from the phone?
(Presumably derived from its serial number or something) - I don't know what a 'phone code' is.
I never had a doubt this phone has been messed with.
Presumably then.. the warranty might have been void (technically) since the day I bought it.
Since the firmware has been messed with?
If you have a mismatch in the Phone and CSC Kies will tell you that you can't update when you connect it as its trying to update that wont be the problem.
Your baseband and build are defiantly Orange so you need to flash the latest Orange France version to keep warranty but would guess that if it doesn't have Orange bloatware on it then at some point its been rooted and the bloatware wiped, in which case you want have a warranty
The latest France Orange firmware is phone I9300XELLA csc I9300FTMELL1 from sammobile site but if you want non branded then you need Open Europe OXA or UK & Europe BTU, the one you mention XEO is Poland although it will work for you its not really the one you want but the choice is yours.
You don't need a rooted phone to use Odin but any update will increase your flash count you can zero this by using triangle away from XDA if you want.
EDIT :- Just noticed in your first post the version is from May 2012 that you currently have so is this phone previously used.