I recently got TF201 in Canada and updated to latest version but ran into few problems and I want to put it back to the way it was. Yes I know I could do Wipe data but its laggy after so I want to Flash it based on rom download from ASUS website. I followed these steps but When it says
"just simply copy this extracted file"
Click to expand...
Click to collapse
do they mean the METAINF and the blob file? also
"press the volume down key and then the power key till the device boots up in the ROM Mode after which you will have to press the Volume up key"
Click to expand...
Click to collapse
the volume up key takes me to recovery and a symbol with Android laying down with red triangle on him appears and thats it nothing else.
Is there an easy way to flash? Also It there is SOP but which SD card are they talking about and do i need to root device before all this stuff. Please help.
Procedure to update Asus Eee Pad Transformer:
First up you will have to download the Zip file of Transformer 3.1 Update in which you will find the update file which you will have to download in your computer.
Now, up next with the help of the USB cable just connect the Asus Eee Pad transformer tablet with the computer in which you have extracted the file so as to copy the extracted file in the tablet.
Now, after extracting the file, just simply copy this extracted file in the Transformer tablet in the SD card and please note that don’t place the file in the inside of any folders, if placed so the file won’t be detected as an update file.
Now, after this simply turn off the device and after that press the volume down key and then the power key till the device boots up in the ROM Mode after which you will have to press the Volume up key after which the updation process will be initiated after selecting the file which you have placed in the tablet.
After the process is started, the device will take 5 – 10 minutes of time while it applies the update. As soon as the device is updated the tablet will be rebooting automatically and then a user notification will be popping up on your dock station stating the update availability notification to the version of 0209. Just follow the on screen instructions to proceed for the update and then there you go, you are ready with the update on your device
Click to expand...
Click to collapse
Related
I installed clockworkmod per instructions.
When I press the on and volume up buttons I get the appropriate message and then the system boots with the tap n tap (ugh) rom.
I never see a clockworkmod menu
What am I doing wrong?
I am having the same issue!!! I am beyond frustrated right now. I have downgraded to 1.1 and had success during one try and from now on trying to boot into Clockwork it won't let me. All it does is say booting from kernal image and then goes to the splash screen then to the box with the down arrow and continues until it goes right back to the viewsonic birds and boots to the normal rom again.
What the He!! am I doing wrong here? I have already done a factory reset with data wipe...
Instructional video
See if this helps.
How to install Clockwork mid and tnt lite - Pensacola computers
http://www.youtube.com/watch?v=27oDBi-x760
argusvision said:
See if this helps.
How to install Clockwork mid and tnt lite - Pensacola computers
http://www.youtube.com/watch?v=27oDBi-x760
Click to expand...
Click to collapse
That is exactly what I was watching and following when this happened to me. Any other ideas? I did however just return the other one after clearing the data and got another one so I am going to try and avoid doing that again.. I am going to try and tread slowly here so I can get things right....
I've had 100% success using the instructions here:
http://forum.xda-developers.com/showthread.php?t=861950
Go to the first link (Dropbox) and, if Windows, download the 2 zipped files. I will say I bought a Viewsonic G tablet back in December and I had to used the older zipped file in the DEPRECATED folder. My latest Viewsonic G tablet works with the latest files.
Unzip the 2 files, combine into one folder, plug in the USB cable, and reboot by holding the POWER button *and* the Vol- button. You should see the initial boot screen but should quickly see a black screen. Run the .bat file (nvflash_gtablet.bat). If the computer doesn't see the tablet, read the above link on how to make sure you've installed the drivers for the tablet. Once the batch file ends, your tablet will automatically reboot. I would suggest powering off the tablet before it reboots as you can install CW_Mod via NVFlash, which is what I do. Grab CW_Mod 1.1 (not 1.2). Unzip the UPDATE.ZIP file and copy RECOVERY.IMG to the folder where you combined the 2 zipped files from Dropbox. Connect your tablet to your PC via the USB cable. Reboot the tablet again by pressing the POWER button while holding the Vol- button. Same thing--i.e. initial boot screen, then a black screen. Either create a batch file or run the following command (sorry cannot remember the thread where I found this, so I take no credit for this):
nvflash.exe --bl bootloader.bin --download 9 recovery.img
This is a quick process. Once the command finishes. Unplug your USB cable from your tablet and hold down the POWER button to turn off your tablet. You can either power it back on or power it back on and check to make sure CW_Mod is installed (recommended). For this, press the POWER button while holding down the Vol+ key until you see the line of text appear in the upper left hand corner of the screen.
Again, on one of my Viewsonic G tablets, I had to use the zipped file contained in the DEPRECATED folder on the Dropbox. I can't remember what the current files did (think soft-brick).
Good luck. As I've said, I've used these steps so many times as I went through every 1.1 ROM and 1.2 ROM trying to find the one I liked and the steps were perfect. At this point, though, while in CW_Mod, I would go through the process of partitioning your system and formatting stuff.
Has anybody found a link to any custom or stock firmware for this tablet?
I have a small annoying issue that I am sure could be fixed with a flash, the back button randomly stops working until I reboot.
The baby Einstein on their 800 number thought a factory reset would fix it, then that using the software button was a good enough solution and had no clue about tablets in general. Through Support e-mail they were heading towards wanting me to ship the tablet back rather than supply a link to firmware. I explained to them it doesn't appear to be hardware related as it is random, and reboot fixes it.
im looking for the same firmware man, i have mine bricked :S
How to Flash Zeki TB782B, TB1082B Rom with Livesuit (UnBrick)
gmrastaman said:
im looking for the same firmware man, i have mine bricked :S
Click to expand...
Click to collapse
There is already a different thread on here with the information, but here is how I have personally done it......
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/show....php?t=1621831
ROM for Zeki TB753b
Do you happen to have the Rom for the TB753b (JB 4.1.1)? I have soft bricked my mom's tablet, and need the rom so I can flash it, and hopefully get her tablet back in working order.
Zeki TBD753B stock rom
I am generally good at finding stuff, but I too can not find the stock rom for the tbd753b 7" zeki tab. Any help would be much appreciated. Thank You
need build.prop
i need the original build.prop to flash to my messed up TB753B. does anyone got it??!!??
dragonfriend0013 said:
i need the original build.prop to flash to my messed up TB753B. does anyone got it??!!??
Click to expand...
Click to collapse
Do you still need the build.prop.original?
Sent from my TBD753B using Tapatalk 4
Got it working
vindicato said:
Do you still need the build.prop.original?
Sent from my TBD753B using Tapatalk 4
Click to expand...
Click to collapse
I was finally able to get access to it through ADB and reset the permissions on the file. all is good now. I do still have problems with the screen "double tapping" though and have not figured out how to fix it. Does yours do the same thing.
The only problem I seem to have is that top left hand corner. Sometimes you have to tap that location a couple of times if that's what you mean
Sent from my TBD753B using Tapatalk 4
---------- Post added at 06:42 PM ---------- Previous post was at 06:37 PM ----------
That and updating my Super su binary...
Sent from my TBD753B using Tapatalk 4
please give the firmware for tb753b
please give the firmware for tb753b. for Livesuit.exe
ROM for TAB ZEKI tbdc1093b
any have de rom for this tab? ZEKI tbdc1093b
fallen links , FID: BN TB782B
Can someone help me? I need this rom , my tablet is brick
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/show....php?t=1621831[/QUOTE]
hi guys
i have Crony cn98 MID tablet (Chinese)
i deleted file bin from system folder by wrong
when i power up the tablet, restarting itself
what should i do to fix that problem
i have 2 tablets of this type
it means i can bring file bin
but how to put bin folder in the tablet?
i need help
no way to fix it ?
how to reinstall android os?
or install custom rom 4.0.3 from pc ?
for crony cn98
os : 4.0.3
kernel : 3.0.8+
no reply :crying:
I did some reading on your behalf, let's try to sort this out. Good news is you can't really brick A10 allwinner devices.
Ideally you would need the original firmware from the manufacturer (.img file) and flash it through livesuit. However, this firmware is no where to be found on their website, I would try to email the device maker to send you the firmware. The email is: [email protected]
1 . Acqure the firmware file from manufacturer
2. Download livesuit (http://www.mediafire.com/download.php?lawkcbqhbictar4).
Follow these Instructions to flash .img file through livesuite (I found them elsewhere):
3. Open LiveSuit.exe
Double-click to open the upgrade tool LiveSuit.exe
4.Select the firmware
Click the cube to the far left to select the firmware .img file.
5. Turn off your tablet
6. Press the key combination to start it in the upgrade mode
a. Press the "Vol -" key, then press the "Power" button, hold two buttons at the same time
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly or hold the "Vol -" keys and the "Power" button for more than 6 seconds (you should get a pop up window if done correctly , if not repeat step 5 from beginning)
d. DON'T release the "Vol -" button till the LiveSuit window pops up
e. You can now release the "Vol -" button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver LiveSuit folder, click Next to complete the driver installation prompts).
You should see LiveSuit window pops up; otherwise, you didn't do it correctly, you have to repeat step 4 and 5.
7. Select the format to force upgrade
Livesuit prompt "force format", click "Yes" (Y). All of the original apps installed will be removed.We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
8. Upgrade begins
Pop-up "OK to force format" dialog box, select "Yes", the upgrade begins.
9. The upgrade is complete
Firmware download process last about three and a half minutes or so, please wait until the prompt "upgrade successful."
10. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
11. Congratulations! You have flashed the firmware.
If you are not able to acquire the original firmware from manufacturer, you can try to flash this one:
http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img (funbook pro m500, similar specs and running same processor)
thank u very very much
i do that all but this frimware is not compatible (it show me all thing black)
i still need frimware
i send email for [email protected] but no reply yet
Hello!
So when i boot my tablet holding power button and volume - button my tablet enter into special asus menu, and there are some options. I don't know what is RCK. When i choose it after a few secounds i can see android with red triangle above. I also find some infos that i can flash firmware using this option. So can anybody tell me what is it and if it is possibble to flash tablet using this, how to do it?
Sent from my ME301T using xda premium
i don't know how it works... but it is the stock recovery on our me301t
just to say you can install upgrade e downgrade (yes even if asus says not ) without RCK utility, simply unzip (once not twice) the firmware, you can download from asus site, into root directory of your sd (formatted as fat32)... insert it into a tablet (off mode)... power on and in the bottom angle near clock you must see a triangle with exclamation mark that informs you can upgrade/downgrade your tablet...
maybe you can try info on RCK on TF300 forum... both tablet are similar use
So,what if i brick my tablet and get bootloop. How to flash firmware?
it seems you can flash file as .blob with RCK but I don't know how...
if you'll brick the tablet i think there is no more chance that send it to asus RMA but first you'll can try to flash stock firmware .blob with RCK
now... with your tablet completely functional if you want to try it only at your own risk :fingers-crossed:
I don't know if RCK works with firmware you can download from asus site in .zip format or once unzip it or unzip twice and use the .blob file... I don't know if RCK works with this files insert in external SD or internal memory (but if you have bricked the tablet how can you put the file into it???) or you need help by adb command (usb debug) and the last but not the least are you sure that RCK works if the tablet is bricked or need it in function? my phone samsung for example needs, to replace stock rom, odin software on a pc to flash it on the phone even if I can't access to the recovery partition
I'm sorry can not help you more, try asking some of the functionality of RCK dev in section TF300
I believe that i've unlocked my asus tf201 prime by following the document : Asus Transformer Prime TF201 ROM update
i did following
* unlock bootloader
* root
But when i want to upgrade the bootloader by using fastloader i select the usb icon and then the documentation says that
i should be able to write "fastloader devices" and get a serial number but this is not happening
actually nothing more is happening when i've selected the usb icon
It seems that im able to boot my device as usual but i still want to upgrade my device.
How should i proceed ??
After powering down the tablet and pressing vol down and power and then selecting the usb icon, how long time do i need to wait to see some response ??
jka_dk said:
I believe that i've unlocked my asus tf201 prime by following the document : Asus Transformer Prime TF201 ROM update
i did following
* unlock bootloader
* root
But when i want to upgrade the bootloader by using fastloader i select the usb icon and then the documentation says that
i should be able to write "fastloader devices" and get a serial number but this is not happening
actually nothing more is happening when i've selected the usb icon
It seems that im able to boot my device as usual but i still want to upgrade my device.
How should i proceed ??
Click to expand...
Click to collapse
Did you try to follow my tutorial from step 1 ?
Here is the link
Keep us updated,
regards
Hi
No the link you supply is not the instructions i followed. But im unable to find the link to the instructions i tried to follow. I did download a text document called "Asus Transformer Prime TF201 ROM update"
But perhaps its an old one.
As soon as i get some spare time i will try to follow the instructions supplied by the above link
Thanks
jka_dk said:
After powering down the tablet and pressing vol down and power and then selecting the usb icon, how long time do i need to wait to see some response ??
Click to expand...
Click to collapse
1) Press and hold VOL-DOWN + POWER simultaneously (TF should boot into 'Starting Fastboot USB download protocol') and give you the options in the center of the screen.
2) Using the VOL-DOWN cycle to the USB plug option (it should be blinking to show that it has been selected)
3) Once USB is selected press the DOWN-VOL to execute USB option.
NP
Nektopoli said:
After pressing the VOL-UP to select the USB option you have to then press VOL-DOWN to execute it.
NP
Click to expand...
Click to collapse
I did that, but nothing happened
What recovery console is installed? (I'm on TWRP_3.0.0.0-KANG)?
NP
Windows unsigned driver mode
jka_dk said:
I did that, but nothing happened
Click to expand...
Click to collapse
Have you installed the Asus drivers in Windows unsigned driver mode ?
http://forum.xda-developers.com/tra...uide-tutorial-asus-transformer-prime-t3486237
I am getting the same problem right now. The hang up is step 4:
4 - PREVENT BRICK : NVFlash
This step is optionnal but highly recommended, your tab will never be bricked after it !!!
1ST PART --------------------
Tab shut down, press Power + Volume- for 3 seconds and release, you are in the bootloader.
Use Volume- to move cursor over the USB logo, confirm with Volume+, you are in the fastboot mode.
Select USB and the tablet just sits there, seems to be indefinetely. Each time, eventually I've held down the power button, turning it off, then it powers up ok. What are we missing?
Step 1 = download
Step 2 is done on PC
Step 3 is on tablet = unlocked successfully
Step 4 = "Prevent Brick" = FAILURE!
Thanks for any help :>
Phil
I usually press and hold VOL-DOWN + POWER simultaneously until it put me into the recovery console [RC], takes about 8 to 10 seconds for the RC menu to pop-up
NP