Hi I have a problem with the Galaxy Player. I managed to make a brick of it, probably hard brick. The display will not boot but the register is something like a USB TEST B/C. I found that it is soft to unbrick "Unbrick Recovery" I tried to download and run the mod. Now I tried to reflash via Odin running on Virtual Box but Odin says that I am wrong about the PIT file, error re-partition.
I tried all possible PIT files for international and U.S. but still nothing. Can you please advise?
This is the (Galaxy S Wifi 5.0 8GB) Galaxy Player 5.0 YP-G70CB/XEO. (International, Poland region)
Sorry for my bad english :/
bump ... no help?
Ok. Your situation right now is the same?
rumirand said:
Ok. Your situation right now is the same?
Click to expand...
Click to collapse
unfortunately yes. but i've got message from heimdall
"failed to confirm end of PIT file transfer" probably i have bad pit file.
Player is YP-G70CB/XEO (XEO - Poland region)
lukyrys said:
unfortunately yes. but i've got message from heimdall
"failed to confirm end of PIT file transfer" probably i have bad pit file.
Player is YP-G70CB/XEO (XEO - Poland region)
Click to expand...
Click to collapse
Unfortunately, Heimdall is not the best option here (even with latest update). Use Odin instead.
Flash first a rom which includes Sbl.bin and boot.bin with "phone bootloader update" option checked in Odin. Then, check if your device can turn on or stays in debug mode. If so, flash with re-partition option and the pit file (search AdamOutler's thread).
rumirand said:
Unfortunately, Heimdall is not the best option here (even with latest update). Use Odin instead.
Flash first a rom which includes Sbl.bin and boot.bin with "phone bootloader update" option checked in Odin. Then, check if your device can turn on or stays in debug mode. If so, flash with re-partition option and the pit file (search AdamOutler's thread).
Click to expand...
Click to collapse
i tried to flash by this topic (without pit file, only bootloader) http://forum.xda-developers.com/showthread.php?t=1386669 but odin return this message
without pit
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
with pit
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what is wrong? i think that pit file is bad. is important region?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
lukyrys said:
i tried to flash by this topic (without pit file, only bootloader) http://forum.xda-developers.com/showthread.php?t=1386669 but odin return this message
without pit
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
with pit
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what is wrong? i think that pit file is bad. is important region?
Click to expand...
Click to collapse
PIT is wrong. Download the right PIT here: http://forum.xda-developers.com/showthread.php?t=1389873
rumirand said:
PIT is wrong. Download the right PIT here: http://forum.xda-developers.com/showthread.php?t=1389873
Click to expand...
Click to collapse
same problem.
Samsung Galaxy Player 5.0 (XEO - Poland rergion => international) right?
This pit i tried "Galaxy Player 5.0 International 8gig thanks aillez" for several times before.
Not sure if it's important, but try flashing using PDA section. And try the full rom.
rumirand said:
Not sure if it's important, but try flashing using PDA section. And try the full rom.
Click to expand...
Click to collapse
same result.. (with check/uncheck re-partition)
That's exactly how I ended up on 2 forums before . I was hoping at least someone from xda could advise.
Does not really help?
Not sure if it's important, but two things.
1. My Odin3 in the title doesn't say I9000. It says Android + SLP (it's v1.82).
2. You don't need to flash GalaxyPlayerBootloaders. Try just using a stock rom in PDA section.
rumirand said:
Not sure if it's important, but two things.
1. My Odin3 in the title doesn't say I9000. It says Android + SLP (it's v1.82).
2. You don't need to flash GalaxyPlayerBootloaders. Try just using a stock rom in PDA section.
Click to expand...
Click to collapse
1) title is customizable in odin.ini - not important
2) how i using stock rom without partitioning? player is totaly bricked probably without partition and this is the problem, bootloader isnt important in this step because odin didnt started uploading any others but pit. or.. where i get right stock rom?
i have a similar problem...
Odin stop when show:
<ID:0/003> SetupConnection..
why?. I have all drivers installed, but it fails..
thx for help!
I'm having the same problem as described by the OP. Did anyone get this working??
Related
Guys i was flashing stock firmware through ODIN, but it failed after install TWRP. Need help as my S6 Edge 925P is stuck and won't boot. One more thing, i can enter download mode just fine.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
My rom version is G925PVPU2BOH1_G925PSPT2BOH1_G925PVPU2BOH1_HOME
Answer seen on this forum to solve the problem is
1) delete the .md5 from the. tar.md5 and open it using winrar
2) extract the firmware..than delete the file from the folder use the new multitool in development thread to make a new tar for Odin..and flash
Can someone please give me step by step direction to do this, please i urgently need help
cd716 said:
Debrick image to gt-i8730 in 5.1.1 ROM:
https://drive.google.com/file/d/0B3RYodobnzv5UWZfbHBOb3U3ZWM/view?usp=docslist_api
Debrick image to gt-i8730 in 4.1.2 (stock ROM)
https://drive.google.com/file/d/0B3RYodobnzv5RW5iRjI3aHpTNzg/view?usp=docslist_api.
Good luck.
Click to expand...
Click to collapse
---------- Post added at 04:22 AM ---------- Previous post was at 03:41 AM ----------
[/COLOR]ODIN:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
PHONE:
BOOT RECOVERY MODE
CHECK BOOT PARTITTONS. .
COPY FROM T-FLASH. .
FLASH READ FAILURE
ODIN MODE
PRODUCT NAME: GT-I8730
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: NONE
QUALCOMM SECUREBOOT: ENABLE
SECURE CHECK FAIL: PIT
ERROR: There is no pit binary.
Helppppppppppp me fast please , oh god help mme
i am poor no have money to buy other phone.
cyberc5 said:
Helppppppppppp me fast please , oh god help mme
i am poor no have money to buy other phone.
Click to expand...
Click to collapse
Sorry buddy, I've been busy. This link: PIT FILE will take you to download the pit file of our phone
:crying: more :crying: and more :crying:
:crying::crying::crying::crying::crying:
I tried with the two files and the same occurred prior error.
28/02/2016 - 16:37 PM on BRAZIL:
(GT-i8730.pit , out.pit , ou2.pit):
this error occurred:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8730UBAMC2_I8730ZTAAMC1_I8730UBAMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Out.pit, ou2.pit, GT-i8730.pit and more pit files,
this error occurred
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
no solution?
....
Le Penguino said:
... 123.
Click to expand...
Click to collapse
:crying::crying:
cyberc5 said:
:crying::crying:
Click to expand...
Click to collapse
Im sorry, but maybe that was what happened with @aureljared . The internal memory got corrupted. Coincidently, he was also using CM11. I'm sorry buddy, but I don't see anything else to help you :crying:
Le Penguino said:
Im sorry, but maybe that was what happened with @aureljared . The internal memory got corrupted. Coincidently, he was also using CM11. I'm sorry buddy, but I don't see anything else to help you :crying:
Click to expand...
Click to collapse
"internal memory got corrupted.".....
And how to solve the problem?
cyberc5 said:
"internal memory got corrupted.".....
And how to solve the problem?
Click to expand...
Click to collapse
Do you have the pit files? Do you have the stock rom for odin? try to flash it, i have no idea...
Le Penguino said:
Do you have the pit files? Do you have the stock rom for odin? try to flash it, i have no idea...
Click to expand...
Click to collapse
Hi,
Exactly same problem here with my gt8730. But i was running Cm13 and twrp 3. I tried the two previous debrick images for rom 4 and 5.1 with no success. Exactly the same message. And now i was trying to flash the PIT... same error.
SD with debrick image steps:
1 - Usb Cable on. Battery on. Press Power button.
2 - Vibrate, release battery and the power button.
Phone:
BOOT RECOVERY MODE.
CHECK BOOT PARTITIONS.
COPY FROM T-FLASH.
BOOT RECOVERY.
WRITE 159488 SECTORS.
FLASH WRITE FAILURE
ODIN MODE
PRODUCT NAME: GT- I8730
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: NONE
QUALCOM SECUREBOOT:ENABLE
after this ODIN detects. And the result is the same that Canoas reported. The result is the same with both debrick images. Should i use a debrick image for CM13? I dont have one.
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone:
PIT FAIL: TOTAL SECTORS (0)
ODIN: flash read failure
Any news on this topic?
Thanks
Prestolite said:
Hi,
Exactly same problem here with my gt8730. But i was running Cm13 and twrp 3. I tried the two previous debrick images for rom 4 and 5.1 with no success. Exactly the same message. And now i was trying to flash the PIT... same error.
SD with debrick image steps:
1 - Usb Cable on. Battery on. Press Power button.
2 - Vibrate, release battery and the power button.
Phone:
BOOT RECOVERY MODE.
CHECK BOOT PARTITIONS.
COPY FROM T-FLASH.
BOOT RECOVERY.
WRITE 159488 SECTORS.
FLASH WRITE FAILURE
ODIN MODE
PRODUCT NAME: GT- I8730
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: NONE
QUALCOM SECUREBOOT:ENABLE
after this ODIN detects. And the result is the same that Canoas reported. The result is the same with both debrick images. Should i use a debrick image for CM13? I dont have one.
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone:
PIT FAIL: TOTAL SECTORS (0)
ODIN: flash read failure
Any news on this topic?
Thanks
Click to expand...
Click to collapse
I believe @cyberc5 problem is the same as @aureljared . The phone NAND simply got corrupted. How do I know this? Easy, if you were running CM13 with TWRP, the "CUSTOM BINARY DOWNLOAD" line should say "Yes (X Counts)".
You should try to nand erase the Emmc
NAND Write Start!! <ID:0/004> FAIL! <ID:0/004> <ID:0/004> Complete(Write)
Please help me i was trying to downgrade my samsung galaxy s6 edge (g925f) but odin says
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in download mode
sw. rev check fails device:4 binary 3
i tried already different stock roms but still failed
hope someone can fix my problem
Flash latest firmware with odin....
I just solved 5 minutes before with my s6e g925f
---------- Post added at 12:50 AM ---------- Previous post was at 12:49 AM ----------
Flash latest firmware with odin....
I just solved 5 minutes before with my s6e g925f
christianesquejo12 said:
Please help me i was trying to downgrade my samsung galaxy s6 edge (g925f) but odin says
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in download mode
sw. rev check fails device:4 binary 3
i tried already different stock roms but still failed
hope someone can fix my problem
Click to expand...
Click to collapse
You Have to flash 5.1.1 bootloader first before flashing frimware
thank you sir but i cant find a bootloader file for s6 edge g925f.
osman34 said:
You Have to flash 5.1.1 bootloader first before flashing frimware
Click to expand...
Click to collapse
thanks sir, can you recommend me some links for bootloader files for s6 g925f edge
christianesquejo12 said:
thanks sir, can you recommend me some links for bootloader files for s6 g925f edge
Click to expand...
Click to collapse
i tried to flash 5.1.1 bootloader but it says fail again. how about you mate?
nicoE. said:
i tried to flash 5.1.1 bootloader but it says fail again. how about you mate?
Click to expand...
Click to collapse
still failed
christianesquejo12 said:
still failed
Click to expand...
Click to collapse
so you did not downgrade your phone? is there any possible solution to downgrade?
christianesquejo12 said:
Please help me i was trying to downgrade my samsung galaxy s6 edge (g925f) but odin says
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in download mode
sw. rev check fails device:4 binary 3
i tried already different stock roms but still failed
hope someone can fix my problem
Click to expand...
Click to collapse
make sure ur reactivation lock is off
here is the link to 5.1.1 bootloader
https://www.androidfilehost.com/?fid=24052804347786560
nicoE. said:
so you did not downgrade your phone? is there any possible solution to downgrade?
Click to expand...
Click to collapse
i tried to flashed 5.1.1 stock rom still failed , then i tried bootloader 5.1.1 only still failed
osman34 said:
make sure ur reactivation lock is off
here is the link to 5.1.1 bootloader
https://www.androidfilehost.com/?fid=24052804347786560
Click to expand...
Click to collapse
i tried that bootloader already still giving me a message sw. rev check fail device: 4 binary: 2
osman34 said:
make sure ur reactivation lock is off
here is the link to 5.1.1 bootloader
https://www.androidfilehost.com/?fid=24052804347786560
Click to expand...
Click to collapse
its FAIL again mate... sad... any idea?
nicoE. said:
its FAIL again mate... sad... any idea?
Click to expand...
Click to collapse
I tried everything for weeks to downgrade back to 5.1.1 and its not possible. Your stuck on mm for now. Have you got your phone back up and running?
Hi.
Even i am facing the same problem on Galaxy S6 920f while downgrading it to 5.1.1. Were you able to resolve the problem.
I tried with following stock roms but facing same error.
G920FXXS3COK5_G920FTEF2COH1_G920FXXS3COK5_HOME.tar
G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar
tinks931 said:
Hi.
Even i am facing the same problem on Galaxy S6 920f while downgrading it to 5.1.1. Were you able to resolve the problem.
I tried with following stock roms but facing same error.
G920FXXS3COK5_G920FTEF2COH1_G920FXXS3COK5_HOME.tar
G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar
Click to expand...
Click to collapse
It is impossible to downgrade....
I found the solution to this "error" the problem lies in the rom we are trying to flashed, when trying to use a rom with the different binary of the phone model it causes these nand errors, here a photo of how to see what the binary of your phone, to know if the rom is the same binary as yours I will leave a small note along, always the 5th number from left to right tells us the binary number of rom after knowing that only lower the correct and voila is ready.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello Guys,
after a bootloop i tried to flash the original firmware via odin on my note 4 but unfortunatly it always fails.
Here is the log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I already try it with a pit file, but it dosent't work.
My Problem is that i don't know if the stock which i had downloaded is the right one for my phone. The smartphone is in bootloop and i cant check the pda and the product code. Is there any possibility to find out the right pda number if the smartphone is in bootloop??
Please guys i need ur help.
Note4_HelpPlease said:
Hello Guys,
after a bootloop i tried to flash the original firmware via odin on my note 4 but unfortunatly it always fails.
Here is the log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I already try it with a pit file, but it dosent't work.
My Problem is that i don't know if the stock which i had downloaded is the right one for my phone. The smartphone is in bootloop and i cant check the pda and the product code. Is there any possibility to find out the right pda number if the smartphone is in bootloop??
Please guys i need ur help.
Click to expand...
Click to collapse
Hi , try with latest GERMAN DBT firmware and don't use pit file for now , also make sure that you set correctly Odin!
download firmware from Sammobile .
One Example :
https://www.youtube.com/watch?v=-wElvfTIDDE
Teddy Lo said:
Hi , try with latest GERMAN DBT firmware and don't use pit file for now , also make sure that you set correctly Odin!
download firmware from Sammobile .
Thank you for ur replie.
I downloaded the latest dbt firmware for my smartphone by sammobile. Then I flash it with Odin, there were no fail in the flash process. After "Pass" in Odin the Smartphone try a reboot, then there were some erros (look at the link).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sry i cant post a picture now because I'm new in the forum.
For Example: "E:failed to mount /cache (no such file or directory).
And there is a lot of this errors.
What that means?
Thank you for ur help.
Click to expand...
Click to collapse
[/QUOTE] Example: "E:failed to mount /cache (no such file or directory).
And there is a lot of this errors.
What that means?
Thank you for ur help.[/QUOTE]
Okay , flash again and this time put this pit file for F you can see in folder F
https://forum.xda-developers.com/attachment.php?attachmentid=3593957&d=1451518504
Good Luck , and let me know if you fix or not .
I'm copy-pasting my own post from Reddit, because it seems that i already wrote everything i could to describe my problem:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried almost everything. I can't get PDA/CSC numbers out of the phone because it's bricked, and i can't access android on it.
I tried to flash with those softs:
G925FXXU4DPH9_G925FPRT4DPH9_PRT
G925FXXU5EQF1_G925FPRT5EQDR_PRT
G925FXXU6ERD1_G925FPRT6ERC1_PRT
G925FXXU6ERG1_G925FPRT6ERG1_PRT
G925FXXU5ERB1_G925FXEO5ERB2_XEO
G925FXXU6ERD1_G925FXEO6ERC2_XEO
AP_G925FXXU6ERF5_CL13830439_QB18615592_REV02_user_low_ship_meta
AP_G925FXXU6ERG1_CL13830439_QB18898846_REV02_user_low_ship_meta
Odin versions i have tried:
Odin3_v1.85
Odin3_v3.09
Odin3_v3.10.6
Odin3_v3.10.7
Odin3_v3.11.1
Odin3_v3.12.7
Odin3_v3.13.1
But no luck.
I tried extracting BOOT.IMG file out of those packages and using /tar-Tool/ from XDA Developers to pack it up again. Next, i have put Boot.tar.md5 into AP section of Odin, booted my phone to download mode (held volume down, home and power button until selection screen of restarting or continuing came out, then i've hit volume up). I pressed start button on Odin and it doesn't even try to flash Boot.img file. Other files like sboot.bin are flashable. I am powerless.
Another thing i tried was to use Smart Switch. Any version of it - both old and new ones. But it just says that it's incompatible with my device. I mean, what the hell, the phone ITSELF asks to be emergency recovered using Smart Switch and Smart Switch points middle finger at me saying it's incompatible with SM-G925F...
Download mode top-left corner text:
Code:
ODIN MODE
PRODUCT NAME: SM-G925F
CURRENT BINARY: CUSTOM
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 0 (0x0000)
RP SWREW: B:6 K:2 S:2
I can't take the phone to the boot menu anymore btw.
-----------------
Edit #1:
I have tried unpacking boot.img and repacking it with cygwin and tar-tool for odin. No luck. It's not even going to try to flash the file anymore. I'm getting "FAIL! (DeviceInfo)" at Odin.
I hope i won't be forced to play Chopin's funeral march...
-----------------
Edit #2:
Never use Dr.Fone, it's a scam. Good thing that i think with my wallet.
I am now trying to get latest 4 file software using SamFirm, will try to flash with PIT file from CSC
Result:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Whole operation took approx 8 seconds from START to FAIL.
-----------------
Edit #3:
I noticed i no longer need to go to Odin download mode in my phone. It's opened by default. It even shows a damn progress bar which gets stuck at approx 40%...
-----------------
Edit #4:
Something's flashing! Not what i want tho, but it seems like CSC and CP are flashing. Problem is that BL and AP doesn't want to flash.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
Nothing's flashed. that modem.bin file was sent but suddenly it timed out? I have no idea what just happened.
CSC (starting with cache.img) also fails, but it doesn't even completes sending.
Code:
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> cache.img
<ID:0/003> Complete(Write) operation failed.
-----------------
Edit: #5
Samsung support gave me a hint that CSC is Polish PLAY (PRT). It's something.png
I am trying to use Android ToolKit and repacking files separately into flashable .tar files. No luck yet.
Zerolte TWRP still not flashing. Odin 3.10.6.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recovery mode unavailable.
Phone might have OEM Lock turned on.
Try rooting your phone and install custom rom via twrp.
Im having the same problem with the exact model, mine pass flash with odin but never boot.
Good luck
thequietman1979 said:
Try rooting your phone and install custom rom via twrp.
Im having the same problem with the exact model, mine pass flash with odin but never boot.
Good luck
Click to expand...
Click to collapse
Tried flashing TWRP into device via odin, same problem, it's just not even trying to flash or gets stuck on the file.
Evangeder said:
I'm copy-pasting my own post from Reddit, because it seems that i already wrote everything i could to describe my problem:
Nothing's flashed. that modem.bin file was sent but suddenly it timed out? I have no idea what just happened.
https://youtu.be/zXSHe3oorIM
Click to expand...
Click to collapse
Try with this video, it can help to fix any Android system issues easily.
parsonssmith said:
Try with this video, it can help to fix any Android system issues easily.
Click to expand...
Click to collapse
Heck no. Dr.fone looks like scam, it's asking for money every single time i just opened it.
Evangeder said:
Heck no. Dr.fone looks like scam, it's asking for money every single time i just opened it.
Click to expand...
Click to collapse
Yeah, it's not free. But not a scam.
I don't really want to pay for something that couldn't work. I could've pay after it finishes, but not before.
Evangeder said:
I don't really want to pay for something that couldn't work. I could've pay after it finishes, but not before.
Click to expand...
Click to collapse
have you still got this issue?
callumbr1 said:
have you still got this issue?
Click to expand...
Click to collapse
Yeah.
Someone just told me that i have OEM lock. But i can't turn it off since the phone is bricked. TWRP fails to flash.
I tried Odin 3.10.6 and Android ToolKit
Evangeder said:
Yeah.
Someone just told me that i have OEM lock. But i can't turn it off since the phone is bricked. TWRP fails to flash.
I tried Odin 3.10.6 and Android ToolKit
Click to expand...
Click to collapse
Try Odin 3.10.7 it seems to work well with G925F.
Try flash the latest BTU firmware. If that fails, try with PIT file.
callumbr1 said:
Try Odin 3.10.7 it seems to work well with G925F.
Try flash the latest BTU firmware. If that fails, try with PIT file.
Click to expand...
Click to collapse
Code:
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
Odin 3.10.6 without PIT - stuck on param.bin
Odin 3.10.7 without PIT - stuck on param.bin
Odin 3.10.6 with PIT - stuck on param.bin
Odin 3.10.7 with PIT - stuck on param.bin
I could've add screenshot if i already had 10 posts, but yeah. It just doesn't want to flash.
Evangeder said:
Odin 3.10.6 without PIT - stuck on param.bin
Odin 3.10.7 without PIT - stuck on param.bin
Odin 3.10.6 with PIT - stuck on param.bin
Odin 3.10.7 with PIT - stuck on param.bin
I could've add screenshot if i already had 10 posts, but yeah. It just doesn't want to flash.
Click to expand...
Click to collapse
You flashed latest firmware? With latest BL? And zerolte_eur_open pit?
callumbr1 said:
You flashed latest firmware? With latest BL? And zerolte_eur_open pit?
Click to expand...
Click to collapse
Code:
BL_G925FXXU6ERF5_CL13830439_QB18615592_REV02_user_low_ship.tar.md5
I downloaded latest firmware with SamFirm
Hey Guys i had the same problem i have fixet it with the newest s6 egde firmware g925fxxu6erf6 i only use the csc,cp and BL the ap i have taken from this firmware G925FFXXU3DPDP and it works for me i hope it work for you too
sorry for my englisch
What are csc regions you used?
i have this problem
Hello everyone I have the similar problem
I have solved this problem by trying to sacrifice my time downloading the LATEST firmware from sammobile. this is very necessary because MAYBE you accidentally updated your bootloader to an invalid version.
after downloading the LATEST version of the firmware Open the package and extract all EXCEPT hidden.img
when extracting is complete Add all extracted files EXCEPT hidden.img as (WHATEVERNAMEYOUWANT).tar using 7zip
this should be done and last step is flash the .tar file you have archived in ODIN 3.13.1 as AP
Hope this helps
This is the firmware I have used
G925FXXU6ERF5_G925FAMO6ERF1_AMO
The 6 ERF5 represents the binary every firmware has binaries whatever you have in your phone in download mode it appears how much binary u have
PS sorry for my english
Evangeder said:
I downloaded latest firmware with SamFirm
Click to expand...
Click to collapse
Which version? BL v6?
callumbr1 said:
Which version? BL v6?
Click to expand...
Click to collapse
BL_G925FXXU6ERF5_CL13830439_QB18615592_REV02_user_low_ship
I am trying to flash TWRP recovery once again. I'm using lots of different odin versions and TWRP versions. Always ending up being stuck on 100% right after output prints "NAND Write Start!!"