I'm copy-pasting my own post from Reddit, because it seems that i already wrote everything i could to describe my problem:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried almost everything. I can't get PDA/CSC numbers out of the phone because it's bricked, and i can't access android on it.
I tried to flash with those softs:
G925FXXU4DPH9_G925FPRT4DPH9_PRT
G925FXXU5EQF1_G925FPRT5EQDR_PRT
G925FXXU6ERD1_G925FPRT6ERC1_PRT
G925FXXU6ERG1_G925FPRT6ERG1_PRT
G925FXXU5ERB1_G925FXEO5ERB2_XEO
G925FXXU6ERD1_G925FXEO6ERC2_XEO
AP_G925FXXU6ERF5_CL13830439_QB18615592_REV02_user_low_ship_meta
AP_G925FXXU6ERG1_CL13830439_QB18898846_REV02_user_low_ship_meta
Odin versions i have tried:
Odin3_v1.85
Odin3_v3.09
Odin3_v3.10.6
Odin3_v3.10.7
Odin3_v3.11.1
Odin3_v3.12.7
Odin3_v3.13.1
But no luck.
I tried extracting BOOT.IMG file out of those packages and using /tar-Tool/ from XDA Developers to pack it up again. Next, i have put Boot.tar.md5 into AP section of Odin, booted my phone to download mode (held volume down, home and power button until selection screen of restarting or continuing came out, then i've hit volume up). I pressed start button on Odin and it doesn't even try to flash Boot.img file. Other files like sboot.bin are flashable. I am powerless.
Another thing i tried was to use Smart Switch. Any version of it - both old and new ones. But it just says that it's incompatible with my device. I mean, what the hell, the phone ITSELF asks to be emergency recovered using Smart Switch and Smart Switch points middle finger at me saying it's incompatible with SM-G925F...
Download mode top-left corner text:
Code:
ODIN MODE
PRODUCT NAME: SM-G925F
CURRENT BINARY: CUSTOM
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 0 (0x0000)
RP SWREW: B:6 K:2 S:2
I can't take the phone to the boot menu anymore btw.
-----------------
Edit #1:
I have tried unpacking boot.img and repacking it with cygwin and tar-tool for odin. No luck. It's not even going to try to flash the file anymore. I'm getting "FAIL! (DeviceInfo)" at Odin.
I hope i won't be forced to play Chopin's funeral march...
-----------------
Edit #2:
Never use Dr.Fone, it's a scam. Good thing that i think with my wallet.
I am now trying to get latest 4 file software using SamFirm, will try to flash with PIT file from CSC
Result:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Whole operation took approx 8 seconds from START to FAIL.
-----------------
Edit #3:
I noticed i no longer need to go to Odin download mode in my phone. It's opened by default. It even shows a damn progress bar which gets stuck at approx 40%...
-----------------
Edit #4:
Something's flashing! Not what i want tho, but it seems like CSC and CP are flashing. Problem is that BL and AP doesn't want to flash.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
Nothing's flashed. that modem.bin file was sent but suddenly it timed out? I have no idea what just happened.
CSC (starting with cache.img) also fails, but it doesn't even completes sending.
Code:
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> cache.img
<ID:0/003> Complete(Write) operation failed.
-----------------
Edit: #5
Samsung support gave me a hint that CSC is Polish PLAY (PRT). It's something.png
I am trying to use Android ToolKit and repacking files separately into flashable .tar files. No luck yet.
Zerolte TWRP still not flashing. Odin 3.10.6.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recovery mode unavailable.
Phone might have OEM Lock turned on.
Try rooting your phone and install custom rom via twrp.
Im having the same problem with the exact model, mine pass flash with odin but never boot.
Good luck
thequietman1979 said:
Try rooting your phone and install custom rom via twrp.
Im having the same problem with the exact model, mine pass flash with odin but never boot.
Good luck
Click to expand...
Click to collapse
Tried flashing TWRP into device via odin, same problem, it's just not even trying to flash or gets stuck on the file.
Evangeder said:
I'm copy-pasting my own post from Reddit, because it seems that i already wrote everything i could to describe my problem:
Nothing's flashed. that modem.bin file was sent but suddenly it timed out? I have no idea what just happened.
https://youtu.be/zXSHe3oorIM
Click to expand...
Click to collapse
Try with this video, it can help to fix any Android system issues easily.
parsonssmith said:
Try with this video, it can help to fix any Android system issues easily.
Click to expand...
Click to collapse
Heck no. Dr.fone looks like scam, it's asking for money every single time i just opened it.
Evangeder said:
Heck no. Dr.fone looks like scam, it's asking for money every single time i just opened it.
Click to expand...
Click to collapse
Yeah, it's not free. But not a scam.
I don't really want to pay for something that couldn't work. I could've pay after it finishes, but not before.
Evangeder said:
I don't really want to pay for something that couldn't work. I could've pay after it finishes, but not before.
Click to expand...
Click to collapse
have you still got this issue?
callumbr1 said:
have you still got this issue?
Click to expand...
Click to collapse
Yeah.
Someone just told me that i have OEM lock. But i can't turn it off since the phone is bricked. TWRP fails to flash.
I tried Odin 3.10.6 and Android ToolKit
Evangeder said:
Yeah.
Someone just told me that i have OEM lock. But i can't turn it off since the phone is bricked. TWRP fails to flash.
I tried Odin 3.10.6 and Android ToolKit
Click to expand...
Click to collapse
Try Odin 3.10.7 it seems to work well with G925F.
Try flash the latest BTU firmware. If that fails, try with PIT file.
callumbr1 said:
Try Odin 3.10.7 it seems to work well with G925F.
Try flash the latest BTU firmware. If that fails, try with PIT file.
Click to expand...
Click to collapse
Code:
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
Odin 3.10.6 without PIT - stuck on param.bin
Odin 3.10.7 without PIT - stuck on param.bin
Odin 3.10.6 with PIT - stuck on param.bin
Odin 3.10.7 with PIT - stuck on param.bin
I could've add screenshot if i already had 10 posts, but yeah. It just doesn't want to flash.
Evangeder said:
Odin 3.10.6 without PIT - stuck on param.bin
Odin 3.10.7 without PIT - stuck on param.bin
Odin 3.10.6 with PIT - stuck on param.bin
Odin 3.10.7 with PIT - stuck on param.bin
I could've add screenshot if i already had 10 posts, but yeah. It just doesn't want to flash.
Click to expand...
Click to collapse
You flashed latest firmware? With latest BL? And zerolte_eur_open pit?
callumbr1 said:
You flashed latest firmware? With latest BL? And zerolte_eur_open pit?
Click to expand...
Click to collapse
Code:
BL_G925FXXU6ERF5_CL13830439_QB18615592_REV02_user_low_ship.tar.md5
I downloaded latest firmware with SamFirm
Hey Guys i had the same problem i have fixet it with the newest s6 egde firmware g925fxxu6erf6 i only use the csc,cp and BL the ap i have taken from this firmware G925FFXXU3DPDP and it works for me i hope it work for you too
sorry for my englisch
What are csc regions you used?
i have this problem
Hello everyone I have the similar problem
I have solved this problem by trying to sacrifice my time downloading the LATEST firmware from sammobile. this is very necessary because MAYBE you accidentally updated your bootloader to an invalid version.
after downloading the LATEST version of the firmware Open the package and extract all EXCEPT hidden.img
when extracting is complete Add all extracted files EXCEPT hidden.img as (WHATEVERNAMEYOUWANT).tar using 7zip
this should be done and last step is flash the .tar file you have archived in ODIN 3.13.1 as AP
Hope this helps
This is the firmware I have used
G925FXXU6ERF5_G925FAMO6ERF1_AMO
The 6 ERF5 represents the binary every firmware has binaries whatever you have in your phone in download mode it appears how much binary u have
PS sorry for my english
Evangeder said:
I downloaded latest firmware with SamFirm
Click to expand...
Click to collapse
Which version? BL v6?
callumbr1 said:
Which version? BL v6?
Click to expand...
Click to collapse
BL_G925FXXU6ERF5_CL13830439_QB18615592_REV02_user_low_ship
I am trying to flash TWRP recovery once again. I'm using lots of different odin versions and TWRP versions. Always ending up being stuck on 100% right after output prints "NAND Write Start!!"
Related
[Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
I was flashing the original unrooted TouchWiz ROM back to my phone, but accidentally put it in the "Phone" instead of "PDA" slot. Now the phone only says "Firmware update failed" and in Odin flashing a ROM to PDA also fails.
So I need a "Phone" ROM for the SCH-i605. Where can I get this? Please help. Thank you.
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Weres it falling in Odin now? What step or error messages. If it's sboot you need the alternate restore root66 file.
Sent from the dark on a Note 2
kintwofan said:
Weres it falling in Odin now? What step or error messages. If it's sboot you need the alternate restore root66 file.
Sent from the dark on a Note 2
Click to expand...
Click to collapse
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> param.bin
<ID:0/003> recovery.img
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Keavon said:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> param.bin
<ID:0/003> recovery.img
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you unlock your bootloader, and is it that new one that recently came out?
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Use the alternate restore from here
http://forum.xda-developers.com/showthread.php?p=35265728
I'm gonna bet you are on the latest ota with a locked boot loader. Which is why it's failing at sboot
Sent from the dark on a Note 2
kintwofan said:
Use the alternate restore from here
http://forum.xda-developers.com/showthread.php?p=35265728
I'm gonna bet you are on the latest ota with a locked boot loader. Which is why it's failing at sboot
Sent from the dark on a Note 2
Click to expand...
Click to collapse
I am using a locked bootloader, and the last ROM I had installed was the official original ROM from Samsung. My next step was to unlock the bootloader, but this happened first...
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Keavon said:
I am using a locked bootloader, and the last ROM I had installed was the official original ROM from Samsung. My next step was to unlock the bootloader, but this happened first...
Click to expand...
Click to collapse
So do what I just said and you should be good
Sent from the dark on a Note 2
kintwofan said:
So do what I just said and you should be good
Sent from the dark on a Note 2
Click to expand...
Click to collapse
The file I am flashing to 'PDA' is the one from that post, but it fails. Don't I need to flash something onto 'Phone'? Also what is 'Phone'?
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Keavon said:
The file I am flashing to 'PDA' is the one from that post, but it fails. Don't I need to flash something onto 'Phone'? Also what is 'Phone'?
Click to expand...
Click to collapse
Your not flashing the alternate restore file I linked or it would not be writing sboot
Sent from the dark on a Note 2
kintwofan said:
Your not flashing the alternate restore file I linked or it would not be writing sboot
Sent from the dark on a Note 2
Click to expand...
Click to collapse
I just redownloaded that file from http://forum.xda-developers.com/showthread.php?p=35265728 (one one that says Download Me and not Mirror 1 or 2) and it still fails at sboot.bin
Edit: I'm an idiot. I read your post wrong. I thought you meant that the link was an alternate way to restore, not to use the file called Alternate Restore. I'll go download that now.
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Keavon said:
I just redownloaded that file from http://forum.xda-developers.com/showthread.php?p=35265728 (one one that says Download Me and not Mirror 1 or 2) and it still fails at sboot.bin
Click to expand...
Click to collapse
I'll say it one more time... DOWNLOAD "ALTERNATE RESTORE" is in blue below the mirror 1 and mirror 2. It does not have sboot in it
I'll make it easy here is the link
http://www.androidfilehost.com/?fid=9390225151984927096
Sent from the dark on a Note 2
kintwofan said:
I'll say it one more time... DOWNLOAD "ALTERNATE RESTORE" is in blue below the mirror 1 and mirror 2. It does not have sboot in it
I'll make it easy here is the link
http://www.androidfilehost.com/?fid=9390225151984927096
Sent from the dark on a Note 2
Click to expand...
Click to collapse
Yeah, I apologize for that. I noticed it right after I posted my reply, but had to wait five minutes before it let me post my update, in which time you had already responded. As my edit says, I misinterpreted what you had said. 2/3 done downloading it now.
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Keavon said:
Yeah, I apologize for that. I noticed it right after I posted my reply, but had to wait five minutes before it let me post my update, in which time you had already responded. As my edit says, I misinterpreted what you had said. 2/3 done downloading it now.
Click to expand...
Click to collapse
Ya I saw that. Let's hope it at least gets you booting. I think you'll be good.
Sent from the dark on a Note 2
Oh great, the download died literally on the last megabyte. It said disconnected from the server, and I couldn't get it to reconnect...
So now it's time to re-download the ENTIRE file for the last piece of the very last megabyte...
Okay, I flashed it and it's all working. Do I still need to unlock the bootloader, or did that ROM do it for me?
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Keavon said:
Okay, I flashed it and it's all working. Do I still need to unlock the bootloader, or did that ROM do it for me?
Click to expand...
Click to collapse
You do need to unlock the boot loader still
Sent from the dark on a Note 2
Okay, following this guide: http://galaxynote2root.com/galaxy-note-2-tutorials/how-to-unlock-bootloader-on-verizon-galaxy-note-2-sch-i605/
At step 8 it flashes, but fails, still at sboot.bin.
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Keavon said:
Okay, following this guide: http://galaxynote2root.com/galaxy-n...bootloader-on-verizon-galaxy-note-2-sch-i605/
At step 8 it flashes, but fails, still at sboot.bin.
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Well that's because they method doesn't work on the new ota. Quick tip don't use outside sources that just repost xda work. Get it from the source.... This is the ota method
http://forum.xda-developers.com/showthread.php?p=37195287
Sent from the dark on a Note 2
Okay, thank you so much for everything. I got it all running with the unlocked bootloader, and now I'm running CyanogenMod! I guess it didn't hurt anything to flash to Phone.
Hey guys, long time lurker here, and finally made an account to get some help :/
It seems like I softbricked my phone today, and I have been unsuccessful at trying to recover it through Odin.
I was trying to install the GS4 GPE (KK 4.4.3) when I accidentally wiped my System (with my cache, data, and dalvik) and then turned my phone off. My phone wouldn't go past the "Samsung Custom" screen, so I tried to boot it into Download mode for a full recovery via Odin. I've been following the thread by Surge regarding using Odin with NC5, and it keeps failing on me
When I try to boot it normally now, it comes up to a screen that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".
If I try to do a Full Wipe using Surge's guide on Odin and NC5, it gives me this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
I've tried this multiple times, and it either stops at NAND Write Start into a Complete(write) operation failed, or it just gives me that response after Get PIT for mapping.
What I know for sure:
- I am on NC5, rooted and safestrap 3.72
Any ideas? Maybe my only option is to cancel my contract and get a new phone? Any help would be appreciated.
EDIT 1: I tried Odin again for the hell of it and seems like it got little further before failing. I got to sbl1.mbn and sbl2.mbn before hitting "Complete(Write) Operation failed"
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
wnsdlek said:
Hey guys, long time lurker here, and finally made an account to get some help :/
It seems like I softbricked my phone today, and I have been unsuccessful at trying to recover it through Odin.
I was trying to install the GS4 GPE (KK 4.4.3) when I accidentally wiped my System (with my cache, data, and dalvik) and then turned my phone off. My phone wouldn't go past the "Samsung Custom" screen, so I tried to boot it into Download mode for a full recovery via Odin. I've been following the thread by Surge regarding using Odin with NC5, and it keeps failing on me
When I try to boot it normally now, it comes up to a screen that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".
If I try to do a Full Wipe using Surge's guide on Odin and NC5, it gives me this:
I've tried this multiple times, and it either stops at NAND Write Start into a Complete(write) operation failed, or it just gives me that response after Get PIT for mapping.
What I know for sure:
- I am on NC5, rooted and safestrap 3.72
Any ideas? Maybe my only option is to cancel my contract and get a new phone? Any help would be appreciated.
EDIT 1: I tried Odin again for the hell of it and seems like it got little further before failing. I got to sbl1.mbn and sbl2.mbn before hitting "Complete(Write) Operation failed"
Click to expand...
Click to collapse
Try booting into download mode and plugging the phone in to your computer and running "Emergency Firmware Recovery" and "Firmware Upgrade and Initialisation" in Kies under the "Tools" tab. They will both fail, that is okay. Just follow the steps for both as far as it will let you. I have been in your exact situation (not turning my phone off after wiping, but the yellow triangle and firmware error message) a couple times and for some reason this seems to reset the phone or something, allowing you to run the odin program. Also, make sure you are using Odin 3.10. Im not sure the GPE Rom you are trying to flash is even compatible with NC5, I have not seen one on the threads that is except for one that Gigilie ported and I think that one was a 4.4.4 port, though I could be wrong. What is the link to the thread you were trying to flash? Let me know how it goes.
Hello,
i try to install twrp on my s6 edge, but now it will not start anymore, the screen is following the samsung Logo black.
i try to install the original firmware from sammobile, but it stuck or give me an error.
what can i do? i try on 2 computer, 2 usb cable and and and... its the same all time
can you help me pls?
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FAUT1AOCN_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
sure you using latest Odin..? and firmware matches..?
try from odin 1.85 to 3.10 all
What model of s6 edge you haw??Look on samifirmware for yours model.Use odin 3.10.6 i think
and use the right region code BTW branding code..for free Germany it's dbt as example..
I hate to say it, but I have the exact same issue...
I tried to install TWRP, now the screen just goes blank after the Samsung logo.
I have downloaded the latest O2 UK firmware, flashed as normal using odin 3.10.6, and I get a "fail" too
Please could someone suggest something?
Thanks
EDIT: Re-flashed root, and all good again!
Guys i was upgrading official firmware through ODIN, but it failed. Tried flashing TWRP Recovery as well and below error occured. Need help as my S6 Edge 925F is stuck and won't boot. One more thing, i can enter download mode just fine.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
PIT related error bothers me .......
@aneeqkhan I know this thread is a bit dated now, but nobody has replied to you question either? I am trying to recover my friends Galaxy S6 Edge SM-G925I, his bricked after a failed standard OTA update. Flashing stock firmware worked for about 1 week then the whole thing crashed and is un-bootable. Attempting to flash the exact same firmware again in hopes that I could boot into recovery (recovery by button combination DOES NOT WORK!) so was hoping to just boot and factory reset (I was thinking that maybe a data corruption was the cause we didn't wipe his phone because he didn't back it up)...upon putting the device into download mode and flashing the exact same firmware package that worked the week before I get the same error that you are getting? Not only that but none of the claimed fixes online for these devices has worked!?
Note: This is a 100% stock device never had anything flashed to it before I got it and still hasn't had anything custom flashed to it either
I am more interested now if you managed to recover your S6 and if so how did you do it?
I downloaded Lollipop 5.1.1 from SamMobile.com. Upgrading from 5.0.2 using ODIN 3.10.6 - the upgrade failed and now the device is soft bricked. I can still access the recovery (HOME/PWR/DN VOL), but can't apply the 5.0.2 stock ROM - that keeps failing too with SW REV CHECK FAIL DEVICE:2, BINARY:1 appearing on the device.
I'm not fussed what version 5.0.2 or 5.1.1 gets installed, but how can I get the device working properly again?
All help appreciated.
Update: I've tried using ODIN to upload the stock image and get the following:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FVIR1AOCN_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The device displays the SW REV message mentioned above.
you can't downgrade only upgrade
Thanks for the reply. So how can I push the 5.1.1 upgrade to the device?
if you can't flash your 5.0.2 means 5.1.1. firmware is already flashed..if you had problems with the 5.1.1 firmware you must delete the hidden Img..here is an example
http://forum.xda-developers.com/showthread.php?t=3141455
it's now the 7th time I wrote this..BTW don't mix your problems..the 5.1.1 firmware should have the fail problem later after system BTW hidden
Guys i was upgrading official firmware through ODIN, but it failed. Tried flashing TWRP Recovery as well and below error occured. Need help as my S6 Edge 925F is stuck and won't boot. One more thing, i can enter download mode just fine.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
PIT related error bothers me .......
aneeqkhan said:
Guys i was upgrading official firmware through ODIN, but it failed. Tried flashing TWRP Recovery as well and below error occured. Need help as my S6 Edge 925F is stuck and won't boot. One more thing, i can enter download mode just fine.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
PIT related error bothers me .......
Click to expand...
Click to collapse
can you describe your steps..maybe one of them is wrong..?!
Alex-V said:
can you describe your steps..maybe one of them is wrong..?!
Click to expand...
Click to collapse
I downloaded 5.1.1 firmware from sammobile and ODIN 3.10.6. when i connected the phone with PC for flashing, all drivers were already updated. Then i hit start after selecting ROM n it failed on the step as mentioned in OP. I tried booting up the phone but it didn't. Then when i again tried flashing the rom after booting in download mode, the error that i mentioned in my earlier post appeared (including error of PIT). Since then the phone does not even shut down. It either boots in download mode or stays at the error screen stating something about something went wrong with the software update and use smart switch.... something like it.... any suggestions.
EDIT: I was running stock 5.0.2 firmware unrooted....
aneeqkhan said:
I downloaded 5.1.1 firmware from sammobile and ODIN 3.10.6. when i connected the phone with PC for flashing, all drivers were already updated. Then i hit start after selecting ROM n it failed on the step as mentioned in OP. I tried booting up the phone but it didn't. Then when i again tried flashing the rom after booting in download mode, the error that i mentioned in my earlier post appeared (including error of PIT). Since then the phone does not even shut down. It either boots in download mode or stays at the error screen stating something about something went wrong with the software update and use smart switch.... something like it.... any suggestions.
EDIT: I was running stock 5.0.2 firmware unrooted....
Click to expand...
Click to collapse
OK..you put the firmware to the right box..don't have a laptop here..I think it was ap or so..will look later
try the steps I described here
http://forum.xda-developers.com/showthread.php?t=3091028
Alex-V said:
if you can't flash your 5.0.2 means 5.1.1. firmware is already flashed..if you had problems with the 5.1.1 firmware you must delete the hidden Img..here is an example
http://forum.xda-developers.com/showthread.php?t=3141455
it's now the 7th time I wrote this..BTW don't mix your problems..the 5.1.1 firmware should have the fail problem later after system BTW hidden
Click to expand...
Click to collapse
Thank you very much ... we're back up and running
cd716 said:
Debrick image to gt-i8730 in 5.1.1 ROM:
https://drive.google.com/file/d/0B3RYodobnzv5UWZfbHBOb3U3ZWM/view?usp=docslist_api
Debrick image to gt-i8730 in 4.1.2 (stock ROM)
https://drive.google.com/file/d/0B3RYodobnzv5RW5iRjI3aHpTNzg/view?usp=docslist_api.
Good luck.
Click to expand...
Click to collapse
---------- Post added at 04:22 AM ---------- Previous post was at 03:41 AM ----------
[/COLOR]ODIN:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
PHONE:
BOOT RECOVERY MODE
CHECK BOOT PARTITTONS. .
COPY FROM T-FLASH. .
FLASH READ FAILURE
ODIN MODE
PRODUCT NAME: GT-I8730
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: NONE
QUALCOMM SECUREBOOT: ENABLE
SECURE CHECK FAIL: PIT
ERROR: There is no pit binary.
Helppppppppppp me fast please , oh god help mme
i am poor no have money to buy other phone.
cyberc5 said:
Helppppppppppp me fast please , oh god help mme
i am poor no have money to buy other phone.
Click to expand...
Click to collapse
Sorry buddy, I've been busy. This link: PIT FILE will take you to download the pit file of our phone
:crying: more :crying: and more :crying:
:crying::crying::crying::crying::crying:
I tried with the two files and the same occurred prior error.
28/02/2016 - 16:37 PM on BRAZIL:
(GT-i8730.pit , out.pit , ou2.pit):
this error occurred:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8730UBAMC2_I8730ZTAAMC1_I8730UBAMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Out.pit, ou2.pit, GT-i8730.pit and more pit files,
this error occurred
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
no solution?
....
Le Penguino said:
... 123.
Click to expand...
Click to collapse
:crying::crying:
cyberc5 said:
:crying::crying:
Click to expand...
Click to collapse
Im sorry, but maybe that was what happened with @aureljared . The internal memory got corrupted. Coincidently, he was also using CM11. I'm sorry buddy, but I don't see anything else to help you :crying:
Le Penguino said:
Im sorry, but maybe that was what happened with @aureljared . The internal memory got corrupted. Coincidently, he was also using CM11. I'm sorry buddy, but I don't see anything else to help you :crying:
Click to expand...
Click to collapse
"internal memory got corrupted.".....
And how to solve the problem?
cyberc5 said:
"internal memory got corrupted.".....
And how to solve the problem?
Click to expand...
Click to collapse
Do you have the pit files? Do you have the stock rom for odin? try to flash it, i have no idea...
Le Penguino said:
Do you have the pit files? Do you have the stock rom for odin? try to flash it, i have no idea...
Click to expand...
Click to collapse
Hi,
Exactly same problem here with my gt8730. But i was running Cm13 and twrp 3. I tried the two previous debrick images for rom 4 and 5.1 with no success. Exactly the same message. And now i was trying to flash the PIT... same error.
SD with debrick image steps:
1 - Usb Cable on. Battery on. Press Power button.
2 - Vibrate, release battery and the power button.
Phone:
BOOT RECOVERY MODE.
CHECK BOOT PARTITIONS.
COPY FROM T-FLASH.
BOOT RECOVERY.
WRITE 159488 SECTORS.
FLASH WRITE FAILURE
ODIN MODE
PRODUCT NAME: GT- I8730
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: NONE
QUALCOM SECUREBOOT:ENABLE
after this ODIN detects. And the result is the same that Canoas reported. The result is the same with both debrick images. Should i use a debrick image for CM13? I dont have one.
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone:
PIT FAIL: TOTAL SECTORS (0)
ODIN: flash read failure
Any news on this topic?
Thanks
Prestolite said:
Hi,
Exactly same problem here with my gt8730. But i was running Cm13 and twrp 3. I tried the two previous debrick images for rom 4 and 5.1 with no success. Exactly the same message. And now i was trying to flash the PIT... same error.
SD with debrick image steps:
1 - Usb Cable on. Battery on. Press Power button.
2 - Vibrate, release battery and the power button.
Phone:
BOOT RECOVERY MODE.
CHECK BOOT PARTITIONS.
COPY FROM T-FLASH.
BOOT RECOVERY.
WRITE 159488 SECTORS.
FLASH WRITE FAILURE
ODIN MODE
PRODUCT NAME: GT- I8730
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: NONE
QUALCOM SECUREBOOT:ENABLE
after this ODIN detects. And the result is the same that Canoas reported. The result is the same with both debrick images. Should i use a debrick image for CM13? I dont have one.
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone:
PIT FAIL: TOTAL SECTORS (0)
ODIN: flash read failure
Any news on this topic?
Thanks
Click to expand...
Click to collapse
I believe @cyberc5 problem is the same as @aureljared . The phone NAND simply got corrupted. How do I know this? Easy, if you were running CM13 with TWRP, the "CUSTOM BINARY DOWNLOAD" line should say "Yes (X Counts)".
You should try to nand erase the Emmc