Sorry To Bother All Of You.
I HAve The Strangest Problem.
I flashed Omega Rom V.7.0 to my phone and was using it for a few days.
I left it overnight for charging for battery calibration.
When I Look At My Phone In The Morning It Doesnt Start.
I Tried A Hard Reset.
I Tried Putting It Into Download Mode.
Nothing Works.
I Have Another S2 working Perfectly Fine With The Same ROM.
It Doesnt Even Show The Charging Icon.
Please Any HElp Would BE Appreciated.
If another Thread Regarding The Same Problem Exists Please Do Let ME Know.
I Searched A Lot Before Putting Up This Thread.
Thank You.
Asif Motorwala said:
Sorry To Bother All Of You.
I HAve The Strangest Problem.
I flashed Omega Rom V.7.0 to my phone and was using it for a few days.
I left it overnight for charging for battery calibration.
That does not calibrate the battery .
When I Look At My Phone In The Morning It Doesnt Start.
I Tried A Hard Reset.
So can you get to recovery mode .
Download mode no you said .
Tried another battery ???
Looks like a JTag repair from here .
jje
Click to expand...
Click to collapse
Thanks.
Thanks For Your Quick Reply.
Should I Use A USB Jig For Resetting The Flash Count And The Boot Splash?
I Am Planning To Return the Phone As It Is Still Under Warranty.
Also I Tried Another Battery.
No Response Either.
had same issue on another rom. went back service center n they replaced the mainboard
jig can help i guess
gavolo said:
had same issue on another rom. went back service center n they replaced the mainboard
jig can help i guess
Click to expand...
Click to collapse
Thanks For The Quick Reply.
i Will Try The USB JIg.
Also Did They Make Any Fuss Over Warranty Issues?
I Have Flashed Many A Phones And This Has Never Happened.
What Has Gone Wrong?
you were just unlucky, but if jig won't get you to download mode, then you'll pretty sure need jtag
Sent from my sgs2 running cm9 using xda app
Root Custom rom or rom counter above zero void warranty according to Samsung service bulletin .
jje
Thanks.
Makrilli said:
you were just unlucky, but if jig won't get you to download mode, then you'll pretty sure need jtag
Sent from my sgs2 running cm9 using xda app
Click to expand...
Click to collapse
Thanks For Your Quick Reply.
I will Try A Jig.
I Hope The Service Centre Accepts It.
A Question.
If I Cannot Get Into Download Mode Is There any way for the Samsung people to know about The Rooting?
Related
hello experts
i had followed steps to root my galaxy s2 using odin flashing and it was success, and unlocked.
The phone started well with a yellow Exclamation.
and the phone was unlocked.
after a few minutes the phone was very slow and got stuck. i restarted it.
again stuck, restarted but it dint start again. i thought battry was low and put to charge.
but it dint charge as well.
So i showed the phone to a repairing center and they said its dead.
Any help that i can start my phone again ??
Thanks in advance guys :'(
Try reverting back to the stock unrooted rom.
Go to Sam firmware.com and download the stock from ..flash it via Odin.. search ..google is ur friend..Don't ask the repairing shop again for advice (phone is dead...duh)
Sent from my GT-I9100 using XDA App
mmmsabeel said:
hello experts
i had followed steps to root my galaxy s2 using odin flashing and it was success, and unlocked.
The phone started well with a yellow Exclamation.
As the instructions say it will .
and the phone was unlocked.
after a few minutes the phone was very slow and got stuck. i restarted it.
again stuck, restarted but it dint start again. i thought battry was low and put to charge.
http://forum.xda-developers.com/showthread.php?t=1108499
but it dint charge as well.
Can you get to download or recovery mode is the first question .
http://forum.xda-developers.com/showthread.php?t=1134290
If you cannot get to download mode a USB recovery jig may help .
jje
Click to expand...
Click to collapse
Hello guys
hi,
i have tried everything above but still its the same, just screen is black, no indications. getting heat behind only wen put to charge.
usb jig does nothing.
best regards
sabeel
mmmsabeel said:
hi,
i have tried everything above but still its the same, just screen is black, no indications. getting heat behind only wen put to charge.
usb jig does nothing.
best regards
sabeel
Click to expand...
Click to collapse
If you have an official stock ROM with official firmware on it, the repair centre should change your mainboard and basically making your phone brand new.
mmmsabeel said:
hi,
i have tried everything above but still its the same, just screen is black, no indications. getting heat behind only wen put to charge.
usb jig does nothing.
best regards
sabeel
Click to expand...
Click to collapse
Warranty time.
mmmsabeel said:
hi,
i have tried everything above but still its the same, just screen is black, no indications. getting heat behind only wen put to charge.
usb jig does nothing.
best regards
sabeel
Click to expand...
Click to collapse
which version were you on? Are you sure the rooting went okay?
The USB-Jig must work. especially on GB. it even works fot me on ICS.
When you can not get into download-mode (odin mode) ór recovery you can't flash anything..
Hope for you that your battery is broke. or maybe one of the processors... Still got warrenty?
Vreestyle said:
The USB-Jig must work. especially on GB. i
Not true at all .
When you can not get into download-mode (odin mode) ór recovery you can't flash anything..
Not strictly true either Mobile Odin .
jje
Click to expand...
Click to collapse
Hi you cant do anything unless you have download mode on you device,
if you have JTAG box you can repair your device using this.
Its normal device getting heat near charging/USB component. This is not HW problem.
Farshard
JJEgan said:
Not strictly true either Mobile Odin .
jje
Click to expand...
Click to collapse
he just got root. and his phone won't boot....
Maybe, recovery-mode?
Vreestyle said:
he just got root. and his phone won't boot....
Maybe, recovery-mode?
Click to expand...
Click to collapse
He already said it won't boot normally, to recovery, or to download mode. JTag or warranty are his only options.
[A] Galaxy s2 bricked
You have to know smthng:
- It is always possible to get to download mode, if not through the button combo (home+power+Volume_DOWN), then through the USB Jig
- If your phone is bricked, the download mode might not announce itself through the android robot: the exclamation mark will persist in some cases. One indication is that ODIN will be recognizing your phone on the COM port (USB that is).
Notify me if you needed further assistance
Which instructions did you follow?
If those are wrong hopefully somebody else will see this and avoid those instructions.
Hello everyone,
I've just bricked my S2.
It won't start at all.
I've flashed I9100XXLP1_I9100OXALP1_OXA and tried to root it with cf-root-sgs2_xx_oxa_ki3-v4.1-cwm4
After the root it won't start up, it was showing SAMSUNG and the yellow triangle with a ! in it.
I've tried to re flash the XXLP1 and it won't start flashing, so I pulled the data cable.
And now it won't start.
PLS HEEEELP!!!
I'm from Romania, maybe someone from Bucharest can help me.
It is not mine, and the owner is anxious to see it, I just wanted to help her unlock it, and..... (
pls help!!
thx a lot!!!
try a usb jig but seems like its a complete brick if it will not turn, needs jtagging by the sounds of it,
can you go into download mod? flash stock firmware in download mod via odin by press volume down +home button + power.
humaila said:
Hello everyone,
I've just bricked my S2.
It won't start at all.
I've flashed I9100XXLP1_I9100OXALP1_OXA and tried to root it with cf-root-sgs2_xx_oxa_ki3-v4.1-cwm4
After the root it won't start up, it was showing SAMSUNG and the yellow triangle with a ! in it.
I've tried to re flash the XXLP1 and it won't start flashing, so I pulled the data cable.
And now it won't start.
PLS HEEEELP!!!
I'm from Romania, maybe someone from Bucharest can help me.
It is not mine, and the owner is anxious to see it, I just wanted to help her unlock it, and..... (
pls help!!
thx a lot!!!
Click to expand...
Click to collapse
1) You didn't read instructions... Why would you try to root a XXLP1 >> ICS << Rom with a KI3 >> Gingerbread << CF-Root ? It states in Chainfire's thread to find the matching letters and root it with the corresponding kernel... You DIDN'T bother to read.
2) Like the poster above said, try entering download mode, and flashing stock ROM again... If you can't, read >> 4)
3) You can try with a USB Jig, though i doubt it will help...
4) Seems like it's completely bricked, probably will need jtag repair, or maybe you can get lucky with warranty + samsung repair service
5) Learn to read...
E_Goldstein said:
try a usb jig but seems like its a complete brick if it will not turn, needs jtagging by the sounds of it,
Click to expand...
Click to collapse
this is what I want to do next
thx
sopheaknhek said:
can you go into download mod? flash stock firmware in download mod via odin by press volume down +home button + power.
Click to expand...
Click to collapse
nope, it's completely dead
@gr4ndm4st3r_bl4ck
yes, my bad
do you think that if I send it back from where I bought it and lie them that it didn't start at all, and that I didn't do anything they will replace it?
it is worth it to try or they will figure it out?
thanks
You could send it into your carrier/Samsung for repair & they might repair it anyway, but there's a much greater chance they'll charge you for it.
A jig is very unlikely to work, but for the sake of a few dollars is worth a try.
Do a search for JTAG repair on here/Google (here's one to get you started). This will probably be cheaper than having it repaired by Samsung/whomever does their repairs in your country.
Which option you choose is obviously up to you.
As MistahBungle said, you could try taking it to samsung and they might repair it under warranty,no questions asked...then again,they could charge you more likely than not... If that happened to me I would take the phone to samsung as i don't trust those shady guys doing jtag repairs... they fu** something up, you lose warranty, you get left without a phone...my 2 cents
Sent from my GT-I9100 using XDA App
gr4ndm4st3r_bl4ck said:
As MistahBungle said, you could try taking it to samsung and they might repair it under warranty,no questions asked...then again,they could charge you more likely than not... If that happened to me I would take the phone to samsung as i don't trust those shady guys doing jtag repairs... they fu** something up, you lose warranty, you get left without a phone...my 2 cents
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I sent it back to them.
Reason: I tried to update via Kies and it went black.
They said it will be replaced -> YEEEEY!!!
Thanks a lot for you concern.
humaila said:
I sent it back to them.
Reason: I tried to update via Kies and it went black.
They said it will be replaced -> YEEEEY!!!
Thanks a lot for you concern.
Click to expand...
Click to collapse
No problem dude, glad you managed to get it under warranty Just make sure you read the instructions carefully next time
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to ICS STOCK LPQ.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
EDIT:
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
I'm assuming download mode and recovery also don't work when the device is powered off?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
Hmm have you tried getting into download mode to see if the device shows up in odin?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
If you can get into download mode then there is still hope. If you can't then your only option is either warranty repair of Jtag service. If download mode then works then just reflash using Odin.
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
Didn't even notice that XXJVU was an i9000 firmware.
To OP: Yup nothing to do, but send it in for repairs.
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
dk206 said:
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
Click to expand...
Click to collapse
Are u sure?
vol down+power+home button is download mode
Check it once again if it doesn't work...
maybe u can try some usb-jigg ?!
so you can come in to download-mode and then flash with odin =(
dk206 said:
ye
So shall I order a JTAG to flash?
JTag is not Samsung warranty its a paid for service .
or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment....
.
Warranty is void with custom rom root or rom counter above zero .
Will they know yes counter is on 4 .
Will they ignore it and put it through as warranty they may but dont count on it .
USB jig would be the starting point .
That fails you could go to warranty repair if thats rejected then pay for JTag repair .
jjue
Click to expand...
Click to collapse
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
eBay. Or Google.
first charge it. Then try to enter download mode again. I have exp. 1 time battery low and phone just warm up and black screen. After Charge, it's ok till now!
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
Read the post USB jigs to loan out
http://forum.xda-developers.com/showthread.php?t=1495867
jje
if you have adb maybe you could try:
1. Connecting your device to PC while turned off,
2. CMD > adb devices
* If you see your device connected, proceed with:
adb reboot recovery or adb reboot bootloader
* If you don't see any device connected, try googling for qhsusb_dload driver for your device, and after you install them (and maybe a couple of PC restarts) repeat step 2
3. if you manage to get to recovery, i hope you have your nandroid backup so you could restore them.
my HTC sensation 4G had this situation few days ago, couldn't go to recovery/bootloader, blanked out when turned on and had fever
i fixed it using those steps, i wish i could remember where i got the qhsusb driver thingy from.. i'll let you know when i remember.
edit: it might work on S2, or might not.. i don't know this will help or not, but you could read adb/fastboot/bootloader/android 101, maybe you could get something from there
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
The bootloader death thing is not 100% true. When I first got my phone, (when there wasn't any rom for it) I tried flashing a I9000 rom. I was so stupid and luckily it didn't break my phone. After the flashing it turned on and stayed on bootlogo.
It was a miracle for me!
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
JJEgan said:
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
Click to expand...
Click to collapse
Ok update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
you should have tried download mode blindly first. as i have flashed once blindly and it fixed my all dead screen.
Dear Forum members i am new to this forum please help me to boot up my Phone :
After rooting using odin i have installed custom rom all working fine later tried to install another using odin selected .PIT file & re partition was checked in the middle Odin stopped responding disconnected the phone & phone stopped as attached image later battery empty. Now its completely dead no light no logo no boot sign tried to enter download mode, recovery mode, connecting to pc using kies, Odin nothing working.
Please help me to get the phone back to working
Thanks in advance
Unfortunately because you played around with the PIT file unless advised means that your phone is bricked.
Since you cannot get into any mode at all, the only method that might work to fix your phone is a Jtag device.
Cosmic Blue said:
Unfortunately because you played around with the PIT file unless advised means that your phone is bricked.
Since you cannot get into any mode at all, the only method that might work to fix your phone is a Jtag device.
Click to expand...
Click to collapse
Thanks for quick reply. can you please tell me where Jtag is available in India people who do it?
Thanks in advance.
For the first time i used forum and its really helpfull.
If he's still getting the screen that he posted in his first post, then it does NOT mean it is bricked beyond repair. In fact, you should be able to flash using Odin while that screen is up.
I've only ever seen people get that screen when they either flashed an I9100G ROM or firmware to an I9100, or the reverse. (flashed an I9100 ROM or firmware to an I9100G)
OP, I'd make absolutely sure you are flashing a ROM or firmware that is meant for your model of device.
ctomgee said:
If he's still getting the screen that he posted in his first post, then it does NOT mean it is bricked beyond repair. In fact, you should be able to flash using Odin while that screen is up.
I've only ever seen people get that screen when they either flashed an I9100G ROM or firmware to an I9100, or the reverse. (flashed an I9100 ROM or firmware to an I9100G)
OP, I'd make absolutely sure you are flashing a ROM or firmware that is meant for your model of device.
Click to expand...
Click to collapse
Hi,
Yes previously it was showing as attached image then i have switched off & switch on back then no indication. completely dead just like a phone with out battery.
tried connecting to pc in all types( using all software's & drivers) not working. now only hardware part is pending.
chetankalburgi said:
Hi,
Yes previously it was showing as attached image then i have switched off & switch on back then no indication. completely dead just like a phone with out battery.
tried connecting to pc in all types( using all software's & drivers) not working. now only hardware part is pending.
Click to expand...
Click to collapse
Oh. Well, if it's completely dead now, and no longer shows that screen, than Cosmic Blue's statement is probably true. JTag it is.
Use Google to try to find a repair shop near you that offers this service. If you can't find one close to you, you'll probably have to mail it off to a shop that does it.
ctomgee said:
Oh. Well, if it's completely dead now, and no longer shows that screen, than Cosmic Blue's statement is probably true. JTag it is.
Use Google to try to find a repair shop near you that offers this service. If you can't find one close to you, you'll probably have to mail it off to a shop that does it.
Click to expand...
Click to collapse
Thank you
Sent to Samsung service center got reply as mother board faulty & has to change Price 9000 INR tried speaking about jtag & USB Jig with service center people even they have no clue about these words.
ctomgee said:
If he's still getting the screen that he posted in his first post, then it does NOT mean it is bricked beyond repair. In fact, you should be able to flash using Odin while that screen is up.
I've only ever seen people get that screen when they either flashed an I9100G ROM or firmware to an I9100, or the reverse. (flashed an I9100 ROM or firmware to an I9100G)
OP, I'd make absolutely sure you are flashing a ROM or firmware that is meant for your model of device.
Click to expand...
Click to collapse
@OP: I'm with this guy. Try a usb jig before jtag.
chetankalburgi said:
Thank you
Sent to Samsung service center got reply as mother board faulty & has to change Price 9000 INR tried speaking about jtag & USB Jig with service center people even they have no clue about these words.
Click to expand...
Click to collapse
Customer service may not know but if you talk to the technician he will know but may not want to do it as they will not make as much money as replacing the motherboard.
If you check the service manual that are posted on in this forum. one of the steps before replAcing the motherboard is using jig then jtag before you replace MB.
My Galaxy S2 won't turn on.....!!!!
Yesterday I tried to flash new android version using Odin 3.7. It got stuck on half way and the phone restarted, which never turned on again... No download mode n recovery mode either....
Please help me guys...
There is no Warranty.. I really appreciate if someone can explain the steps, so that I can do it myself.
Thanks in Advance....
Please don't reply with Jtag n USB jig because I don't have these devices.... And I don't think I can get one here in Qatar. I had mailed skander who own a jig in Qatar but no reply... :/ :/ :/
Hello,
Are you sure that it's charged? Leave it in charge fore 10 mins and then try recovery or download mode.
You know, you can create a jig by yourself if you have a proper working USB-cable. Look for guides for this
Other things i don't know, then only a motherboard replacement can fix it.
If you hadn't flashed anything unofficial, would you still have warranty? Cause i "had" warranty when i hardbricked my (rooted) gt-i9100 and they still fixed it...
Thanks for the reply.
TheMasterOfToast said:
Hello,
Are you sure that it's charged? Leave it in charge fore 10 mins and then try recovery or download mode.
You know, you can create a jig by yourself if you have a proper working USB-cable. Look for guides for this
Other things i don't know, then only a motherboard replacement can fix it.
If you hadn't flashed anything unofficial, would you still have warranty? Cause i "had" warranty when i hardbricked my (rooted) gt-i9100 and they still fixed it...
Click to expand...
Click to collapse
I really appreciate your reply. I had charged it for more than 3 hours.. but still not turning on... Can you give me a good guide on making the USB jig....
mhh.... but I think I need to get a soldering iron too....
Here is the guide: http://forum.xda-developers.com/showthread.php?p=24974232
I saw that you still need some other stuff for this to work, like a resistor etc.. Don't know if you have access to this stuff but..
GOOD LUCK!