Can anyone help me where can I download S5830XWKPN full package file?
On samfirmware site they only provide one-package file.
Thanks alot!
that one package already include every files needed to fully flash your ace.
if you/re not sure, open that one package tar file using winrar, or 7zip. if you see 9 files total, then you're good
setya5785 said:
that one package already include every files needed to fully flash your ace.
if you/re not sure, open that one package tar file using winrar, or 7zip. if you see 9 files total, then you're good
Click to expand...
Click to collapse
I already did that, but I noticed those files are different compare to usual full package file like in KPH.
those are the individual file.
if you extract all 4 full package files using winrar, you'll get the same 9 individual files
setya5785 said:
those are the individual file.
if you extract all 4 full package files using winrar, you'll get the same 9 individual files
Click to expand...
Click to collapse
I'm confused. for full package, extension file names are ".md5".
But on a one package file some files don't have extension name.
What could be wrong?
those full package are also tar archieve. the same 9 files archieved seperately.
lol, you ectract onepackage, pack into 4 seperate archive and vise-versa
it doesn't matter as long as you have all 9 files needed. ODIN will extract all files and flash individual files.
for those who flash onepackage and failed, mostly due to incomplete onepackage.
You sure it'll work all right? You won't be able to flash the KPN 1 package from say 2.2 right?
setya5785 said:
those full package are also tar archieve. the same 9 files archieved seperately.
lol, you ectract onepackage, pack into 4 seperate archive and vise-versa
it doesn't matter as long as you have all 9 files needed. ODIN will extract all files and flash individual files.
for those who flash onepackage and failed, mostly due to incomplete onepackage.
Click to expand...
Click to collapse
Define an incomplete onepackage and a complete onepackage .
consegregate said:
You sure it'll work all right? You won't be able to flash the KPN 1 package from say 2.2 right?
Click to expand...
Click to collapse
as long as you use a full one package file. it's work.
all you need is this files :
amss
arm11boot
boot.img
data.rfs (optional)
csc.rfs
mibib
oemsbl
qcsbl
recovery.img
system.rfs
either you get it from a single archive (onepackage), or 4 archieves (seperated into appboot, code, csc and modem). it doesn't matter.
whatever you give ODIN, it will unpack the archieve to get all those files before actually flashing it into the device.
if you get 4 archieve version -like i said, you can actually extract a full onepackage, and pack it again into 4 archieve-
APBOOT tar.md5 should include :
arm11boot
mibib
oemsbl
qcsbl
CODE tar.md5 should include :
boot.img
data.rfs (optional)
recovery.img
system.rfs
CSC tar.md5 should include :
csc.rfs
MODEM tar.md5 should include :
amss
and yea, i did flash my stock froyo (2.2.1 DXKC1) directly into XWKPN.
EmoBoiix3 said:
Define an incomplete onepackage and a complete onepackage .
Click to expand...
Click to collapse
see above
setya5785 said:
as long as you use a full one package file. it's work.
all you need is this files :
amss
arm11boot
boot.img
data.rfs (optional)
csc.rfs
mibib
oemsbl
qcsbl
recovery.img
system.rfs
either you get it from a single archive (onepackage), or 4 archieves (seperated into appboot, code, csc and modem). it doesn't matter.
whatever you give ODIN, it will unpack the archieve to get all those files before actually flashing it into the device.
if you get 4 archieve version -like i said, you can actually extract a full onepackage, and pack it again into 4 archieve-
APBOOT tar.md5 should include :
arm11boot
mibib
oemsbl
qcsbl
CODE tar.md5 should include :
boot.img
data.rfs (optional)
recovery.img
system.rfs
CSC tar.md5 should include :
csc.rfs
MODEM tar.md5 should include :
amss
and yea, i did flash my stock froyo (2.2.1 DXKC1) directly into XWKPN.
see above
Click to expand...
Click to collapse
I see.....you win .
setya5785 said:
as long as you use a full one package file. it's work.
all you need is this files :
amss
arm11boot
boot.img
data.rfs (optional)
csc.rfs
mibib
oemsbl
qcsbl
recovery.img
system.rfs
either you get it from a single archive (onepackage), or 4 archieves (seperated into appboot, code, csc and modem). it doesn't matter.
whatever you give ODIN, it will unpack the archieve to get all those files before actually flashing it into the device.
if you get 4 archieve version -like i said, you can actually extract a full onepackage, and pack it again into 4 archieve-
APBOOT tar.md5 should include :
arm11boot
mibib
oemsbl
qcsbl
CODE tar.md5 should include :
boot.img
data.rfs (optional)
recovery.img
system.rfs
CSC tar.md5 should include :
csc.rfs
MODEM tar.md5 should include :
amss
and yea, i did flash my stock froyo (2.2.1 DXKC1) directly into XWKPN.
see above
Click to expand...
Click to collapse
Hello setya5785. nice explanation!
Just a few questions.
1. Some other mods here said that you can't directly flash stock froyo (2.2.1 DXKC1) to KPN using one package file. they said, you must flash with any 2.3.3 with full package before flash KPN with one package file. is this true??
2. What do you recommend more, flash KPN with one package file? or extract files first and archive them with tar.md5 then flash??
Hope to here from you, thanks!
EmoBoiix3 said:
I see.....you win .
Click to expand...
Click to collapse
LOL, there's no win or lose
droidtwoseven said:
Hello setya5785. nice explanation!
Just a few questions.
1. Some other mods here said that you can't directly flash stock froyo (2.2.1 DXKC1) to KPN using one package file. they said, you must flash with any 2.3.3 with full package before flash KPN with one package file. is this true??
2. What do you recommend more, flash KPN with one package file? or extract files first and archive them with tar.md5 then flash??
Hope to here from you, thanks!
Click to expand...
Click to collapse
1. it depends. if you can get a complete onepackage, it'll be safe. i flash from DXKC1 directly to XWKPN using onepackage file that include all files (well minus data.rfs, but not that it matter, as long as you wipe before flashing).
so basicly, check your file or where you get your file from.
i use this onepackage - http://www.multiupload.com/Y643XGWMMN (password: sampro.pl)
most mod advice againts onepackage probably because, some uploader / site only give backup files from PDA files like system.rfs, boot.img, and some other (you can only get this from your phone using normal backup).
when flashing only ginger's PDA files into froyo. you'll get stuck at boot. this is because froyo's bootloader can't boot ginger (and vide versa)
so check your files first.
4 speerate archieve can be easier to identify. but onepackgae file, you need to extract or open teh archieve in some archieving app (like winrar or 8zip)
2. if you already got onepackage file with all needed files. just use it.
setya5785 said:
as long as you use a full one package file. it's work.
all you need is this files :
amss
arm11boot
boot.img
data.rfs (optional)
csc.rfs
mibib
oemsbl
qcsbl
recovery.img
system.rfs
either you get it from a single archive (onepackage), or 4 archieves (seperated into appboot, code, csc and modem). it doesn't matter.
whatever you give ODIN, it will unpack the archieve to get all those files before actually flashing it into the device.
if you get 4 archieve version -like i said, you can actually extract a full onepackage, and pack it again into 4 archieve-
APBOOT tar.md5 should include :
arm11boot
mibib
oemsbl
qcsbl
CODE tar.md5 should include :
boot.img
data.rfs (optional)
recovery.img
system.rfs
CSC tar.md5 should include :
csc.rfs
MODEM tar.md5 should include :
amss
and yea, i did flash my stock froyo (2.2.1 DXKC1) directly into XWKPN.
see above
Click to expand...
Click to collapse
Hello setya5785. Nice explanation.
Just a few more questions.
1. Some mods and threads here said the you can't directly flash stock froyo (2.2.1 DXKC1) to KPN using one package file. They said that you must first flash with any 2.3.3 using full package file before you can flash KPN using one package file. Is this true??
2. About flashing froyo 2.2.1 DXKC1 to KPN what do you recommend more, flashing with one package file? or extracting one package file then archive certain files to .tar.md5 then flash??
Hope to hear form you! Thanks!
double post ? see reply above
Excellent explanation. Mind making a thread to include these details? Will clear up the many questions about flashing Samsung firmwares.
setya5785 said:
double post ? see reply above
Click to expand...
Click to collapse
Sorry for the double post. I thought I didn't post it at first. Thanks for the explanation men. I think I'm now ready to update my Ace.
Anyway, can you tell me more about this "when flashing only ginger's PDA files into froyo. you'll get stuck at boot. this is because froyo's bootloader can't boot ginger (and vide versa)". You said I will stock on boot? What will I do when I encounter this?
i could, but it'll just be a copy and paste and redundant from this one.
might as well refer to this post/thread
droidtwoseven said:
Sorry for the double post. I thought I didn't post it at first. Thanks for the explanation men. I think I'm now ready to update my Ace.
Anyway, can you tell me more about this "when flashing only ginger's PDA files into froyo. you'll get stuck at boot. this is because froyo's bootloader can't boot ginger (and vide versa)". You said I will stock on boot? What will I do when I encounter this?
Click to expand...
Click to collapse
you'll mostly gonna get stuck at galaxy ace GT-5830 samsung boot screen.
when you do encounter this. just turn off your phone.
enter download mode, and flash another rom (back to froyo stock) or another ginger using another source.
setya5785 said:
you'll mostly gonna get stuck at galaxy ace GT-5830 samsung boot screen.
when you do encounter this. just turn off your phone.
enter download mode, and flash another rom (back to froyo stock) or another ginger using another source.
Click to expand...
Click to collapse
What could be the reason for this? The file/s??
You just said you successfully flash your stock froyo to KPN using one package file, can I ask you the files you used?
I can't download the file from the link you'd given
droidtwoseven said:
What could be the reason for this? The file/s??
You just said you successfully flash your stock froyo to KPN using one package file, can I ask you the files you used?
I can't download the file from the link you'd given
Click to expand...
Click to collapse
most incomplete (or should i say update/version) or onepackage only include pds files backup. there's no bootloader, modem/phone/baseband.
so if you flash this ginger's update into froyo, your phone still using froyo's bootloader and baseband. this bootloader can't load ginger's system.
this is why most will advice to flash any full package ginger, to get the bootloader.
but if you already have the full onepackage, it's good to go.
i use XWKPN from the on i linked at post #12
there's 9 mirror from that multiupload link.
how can i extract a full rom to use with dsixda kitchen version 0.224? im trying to extract it with 7zip but even though it extracts it i get an error when doing so. all i want to do is get a stock rom to work (extract it and set it up) with the kitchen to do a rom.
so far:
1. downloaded rom from sammobile.com/firmwares/
- it downloads in zip format and after extracting the zip i get a tar.md5 file and a dll file
2. trying to extract full rom to use in kitchen, which is where im stuck...
thanks in advance
rename the file from whatEverTheNameWas.tar.md5 to whatEverTheNameWas.tar and extract
XxPixX said:
rename the file from whatEverTheNameWas.tar.md5 to whatEverTheNameWas.tar and extract
Click to expand...
Click to collapse
did that but kitchen wont detect it
Yeah, sorry I forgot... put it back into a tar and then it should accept it.
Device : s9e
I downloaded a stock rom from sammobile but it refuses to flash because i have newer binary version (latest)
So i decided to extract the vendor.img.lz4 from it and flash it separately in TWRP.
But when i extract the vendor.img from AP i found that it has .lz4 extension. Can i just remove it and flash in TWRP? Or do i need additional steps? Thanks in
Update: i found 7zip zs and it allowed me to extract the .lz4 compressed file
You need to extract them first
On Windows 7-Zip ZS can do it
https://github.com/mcmilk/7-Zip-zstd/releases
On Linux use lz4, sould be in the repos
# lz4 -d somefile.lz4
Areventon said:
Device : s9e
I downloaded a stock rom from sammobile but it refuses to flash because i have newer binary version (latest)
So i decided to extract the vendor.img.lz4 from it and flash it separately in TWRP.
But when i extract the vendor.img from AP i found that it has .lz4 extension. Can i just remove it and flash in TWRP? Or do i need additional steps? Thanks in
Update: i found 7zip zs and it allowed me to extract the .lz4 compressed file
Click to expand...
Click to collapse
You can flash .img with TWRP, idk what's Iz4 but you may want to search a Iz4 to img converter.
I'm not sure tho if Iz4 is just a nickname you can remove or you have to convert it to .img. you may want to search that too
Have a good day
I found something : https://stackoverflow.com/questions/54330039/how-to-read-spark-log-files-iz4-or-snappy
Start you search here