I've tried the several listed proper sequences, I've tried USB debugging on and off, and I've tried rebooting my phone repeated times. I have the Menotek adapter others on here have said they've had luck with... but no matter what I do, neither the phone, nor the several TVs I've tried it with have recognized each other. I feel like there must be some setting or program I'm missing. Please help.
I get sound, no video
Sent from my SAMSUNG-SGH-I717 using XDA
My phone is the att stock version. I have the menotenk with rcp and it works every time I use it on a HDTV but if i use it on a dvi device I have to use headphones or any audio cable in the headphone port or at least use a bluetooth audio other wise I get video that plays about a frame every 3 seconds and no audio. If I am not watching a video it will work fine... but that don't seem to be your problem.
Debugging should be off. This is my procedure:
*Make sure you hdmi cable is already connected to the tv. For things like RCP most tv will only work on hdmi port 1, so just to be sure use port 1 on your tv and make dobule sure you are using the right cable for the port.
* Restart your phone, do not load any app that does not load automaticaly.
Make sure tv is on and set for whichever hdmi port that you intend to use.
Hook hdmi cable to your adapter.
Connect your charger to the adapter. (Most tv's will have some sort of reaction to this. My small tv goes from no signal to no video when I do this, my 52" goes from a blue screen saying no signal to a black screen, this might not happen on every tv but if it does in your then you can guess that connection is good.)
Connect the adapter to your phone. (When this happens you should see the charging icon in your phone, also, you will see a message that says something like "hdmi connected", I can't remeber off my head)
In a few seconds you should see your tv flicker and they you should see video and have audio.
Before I got this menotek I bought another brand and it was touch and go with that one, I had to try the above procedure a couple of times and sometimes it would work, most times it would not....
If you are stock and it don't work I will have to say that you have a defective unit.
Sounds like a hassle to me.
I'm on stock firmware using the OEM Samsung MHL adapter. I simply pull the HDMI out of my PS3, and plug it in to the MHL adapter. Then I plug in the power supply. Then I plug the MHL adapter in my phone. Works flawlessly every time...tested on multiple video apps and games.
Snizzoop said:
Sounds like a hassle to me.
I'm on stock firmware using the OEM Samsung MHL adapter. I simply pull the HDMI out of my PS3, and plug it in to the MHL adapter. Then I plug in the power supply. Then I plug the MHL adapter in my phone. Works flawlessly every time...tested on multiple video apps and games.
Click to expand...
Click to collapse
Hassle? How so? Sounds like the same thing I do.... I'm trying to help the op, telling him how to connect it probably will not do, If he is reading the instruction on the adapter he is alreading doing that same process, I'm trying to give him a better picture than the instructions on the adapter documentation.
Related
For a few months I have used the ipod cable with the original adapter that came with the phone. It worked ok but every so often (5 minutes or so) the registry setting would have to be set back to 1. This was not acceptable so I spent the extra money to buy the HTC tv-out cable.
With the HTC cable I dont have the issue of constantly changing the registry setting but even though it has a port to charge the phone while watching videos on the TV if I plug in the power the video on the TV goes out. This now happens with the adapter and ipod cable. So I dont think its related to the cable.
I am using the stock rom, with SPB mobile shell. I have also went back to make sure the registry entry is 0.
I am at a loss and I cant use the tv-out cable with it connected to the power now at all. I have scanned the forums and have not seen this issue mentioned.
Thanks in advance for any ideas.
I never tried it before, but just did and mine does the same thing with the video out cable. Ironically enough it works just fine with the ipod cable. I dont have to rest mine every 5 minutes, though. I set it once and it stays.
google EnableTVOutCab.CAB and install and works fine with the ipod cable just fine.
Thanks for the replies.
The TV Out cab is certianly easier then changing the registry entry each time. I have not had to reset it in the 10 minutes of testing so it might be the answer. However, as soon as I plug in the power cord (htc wall charger and the proprietary usb cable that came with the phone) the sound stops on the TV and is played on the phone. The Video stays on the TV I just loose sound output to the TV, so your watching the video on the TV but hearing the sound come from the phone.
Hi guys, i bought the MHL adapter from T-Mobile's website for the Sensation 4G (i have an Evo 3D). I set everything up, plugging the MHL adapter into my phone, standard HDMI into the adapter and TV, and the usb cable into the adapter...
After plugging everything in nothing happens. I even tried playing a video and nothing occurred. How do i activate the video out? Do i just have a bad MHL adapter?
A few questions. Does the battery icon on the phone show it is charging? This means that power is going to the adapter and to the phone. If not, try changing power adapters. If the charging icon is there, then try changing HDMI cables. If this doesn't work, you might have a bad MHL to HDMI adapter.
with your tv off, plug your mhl adapter into your phone, plug your power cable into the adapter, turn your tv on and bam! (note that the hdmi doesnt display the lockscreen)
Rydah805 said:
with your tv off, plug your mhl adapter into your phone, plug your power cable into the adapter, turn your tv on and bam! (note that the hdmi doesnt display the lockscreen)
Click to expand...
Click to collapse
My lockscreen shows and boot animation , Also to OP ...the hdmi mirroring is not as stable as HDMWIN is for the OG Evo imo, i had to play with it a bit to first get a picture on my Sammy (unplug/replug/reboot etc.)...then i got pic without sound (OG worked w/audio), ended up running hdmi through my Yamaha amp and that worked. Still not as stable as my 4g evo....LAME
btw I've read usb can't be plugged into pc for powering, must be plugged into wall adapter
louforgiveno said:
btw I've read usb can't be plugged into pc for powering, must be plugged into wall adapter
Click to expand...
Click to collapse
my macbook pro powers it fine. weird.
I was using it with my stand that had a video on/off button to turn the display on an off. Everything was mirrored fine but I had no audio and hulu was intentionally shutting off the hdmi before any video played. Are they blocking media streaming apps from displaying through the mhl adapter? Oh an i powered mine by pluging it into my ps3.
Eat it iPhone said:
Hi guys, i bought the MHL adapter from T-Mobile's website for the Sensation 4G (i have an Evo 3D). I set everything up, plugging the MHL adapter into my phone, standard HDMI into the adapter and TV, and the usb cable into the adapter...
After plugging everything in nothing happens. I even tried playing a video and nothing occurred. How do i activate the video out? Do i just have a bad MHL adapter?
Click to expand...
Click to collapse
Funny that you ask this. I just got an MHL adapter off of Amazon that was just the adapter itself (micro USB one end, female HDMI on the other).
I connected the HDMI cable to my TV and MHL adapter, then I connected my MHL adapter to my phone. Last but not least, I connected my power adapter directly to the MHL adapter and my phone started charging.
The input should be immediate from your phone but if it doesn't, check the following:
1. Make sure your TV is on and the input is selected for the proper HDMI port. If nothing is detected, the TV should report that it's receiving no signal.
2. Make sure the power cable is plugged into your MHL adapter. From my experience, it will not push out the HDMI signal without external power.
3. From my experience, you have to connect your phone to the MHL adapter LAST. NOt sure why but if everything else checks out fine and your phone still isn't pushing out a signal, reconnect the phone to the MHL adapter. You should get an HDMI icon on your top bar.
I have the EVO3D stock.
Everything works fine for me (pictures, music, video) except Netflix. For some reason Netflix looks extremely pixellated. Not quite sure why when everything else looks fine.
Every time i try to connect my MHL adapter recently it will not output to the TV. TV is fine, HDMI cables are fine, adapter works with other devices.
ONCE i did get the MHL adapter to work properly however the rom was very buggy and i had to switch. Even on stock i can not seem to get my phone to output to the TV. It always says MTP Device Detected and never displays out to the TV. I tried USB Debugging but that didnt seem to change things. Im confused, what can be causing this? All my hardware seems fine, i have tried too many roms to count, what can be making me have this problem?
Any help / suggestions will be helpful
Have you got power connected to the MHL adapter?
Sent from my GT-I9100 using XDA App
Fizzerr said:
Have you got power connected to the MHL adapter?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Sure do, even found a power adapter that puts out more power because i thought the one i was using wasnt working properly (1000ma instead of 200ma)
Phone shows its charging, but also comes up with that MTP Initilization message.... put it into USB mode and i dont get that message, but no MHL either.
Ok, a bit more testing, using a HDMI to DVI cable i can connect my phone into my computer screen and it works fine! Using the exact same setup on my TV, nothing. Use the same HDMI port on my TV that my other cables were using, nothing. Use different cables (That work on other devices), nothing. Aparently my TV is not accepting the signal from my MHL adapter.
My TV is a Sony KDL 46E400.
Ideas why i can connect to the monitor just fine but the TV doesnt work?
Hi,
Noob question...
I bought myself the MHL USB Adapter. I want to output my SGSII to my TV. I tried the obvious and plugged in the adapter into the phone along with the HDMI but nothing happened.
Is there something I need to enable (i.e. when connecting a laptop to a project, you have to press Alt+F4 to change output)??
BTW I am running the latest Cyanogen Mod (update-cm-9-20120606-NIGHTLY-galaxys2-signed).
Only stock Samsung roms will work.
Cm9 official problem list stated same, you should have seen that first.
I bought the cheapest mhl adapter of eBay. The adapter is powered and came with a mains power supply ( a micro USB supply like the GS2 itself) and a vradle . I have to power up the mhl before connecting to the HDMI socket on the TV. Otherwise there is nothing to set up or switch on the phone, it just works, you get the beep and the connection icon in the status bar at the top, like when connecting to a pc by a cable.
I use it to watch rented films from the play store. It gives a very good picture on the TV.
Sent from my GT-I9100 using XDA
Hey there, i have tried gathering information about this subject and it seems all threads always lead to this announcement:
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Short: Samsung have changed to an 11 Pin-out to enable USB OTG and MHL Hdmi out at the same time. I purchased an original HDTV Adapter (EPL-3FHUBEGSTD) which as far as i can reliably count indeed has about 11 connectors inside the USB connector that goes into the phone.
Now, i can get HDMI out just fine, but ONLY when i also connect the MHL adapter to a power source (a PC USB Port will do fine), however i have also read, that the phone is able to power the MHL adapter itself but obviously would not be charged then (no surprises there). This does not work however.
Further, connecting a USB OTG cable to the micro usb port on the MHL adapter does nothing. No notification and no devices connecting. No power either, since the LED on my USB Hub does not light up as it should. Connecting any devices to the hub does nothing to change that situation. If i leave out the MHL adapter and connect the USB OTG cable directly to the phone, everything works perfectly. I have tried this with 2 different OTG cables so they are not the problem.
This is an original genuine HDTV Adapter for our phones, which according to that post should be working fine with USB OTG.
AFAIK, this topic --does-- come up more frequently now as i can find a few more discussions about it, albeit none really helpful:
http://android.stackexchange.com/qu...-of-11-pin-mhl-connector-in-samsung-galaxy-s3
http://forum.xda-developers.com/showthread.php?t=1743128
http://forum.xda-developers.com/showthread.php?t=1803079
http://en.wikipedia.org/wiki/Mobile_High-Definition_Link#11-pin_MHL-USB_Connector
http://forum.xda-developers.com/showthread.php?t=1811435
That wiki entry is the most interesting link as it definitely states that using MHL and USB OTG simultaneously is possible and is also the reason why the 5 pin layout was changed to an 11 Pin layout.
Looking forward to reading your replies!
the ability to use MHL and OTG simultaneously would give the S3 so much more purpose. It is powerful enough to replace a desktop computer used only for light stuff like browsing and watching videos, and even simple gaming. If samsung made a dock like the one for the motorola atrix I'm convinced they will broaden their target group. The atrix got everything right with this but is inferior hardware wise. I love the idea of a one device for everything concept. Unfortunately it doesn't rhyme very well with the growth society.
Love the MHL and the OTG is even better only after I got the correct cables as the cables changed on S3 to the S2 version, unlimited space for watching films on my phone is now awesome and even better connecting it to to the TV just need a good dock,
is there perhaps any expert advise on this? According to multiple sources it should work but really doesnt. Did i buy the wrong mhl adapter?
I think they will only both work together when being used with an MHL enabled tv. That way the power comes from the tv and the usb on the adapter can be used for the usb-otg cable.
Sent from my GT-I9300 using Tapatalk 2
But if i connected the MHL with the s3. Would sound come out of my phone AND my TV or just my TV. If it justs comes out of my TV, then can i hook up my bluetooth headphones and listen to my video or it would not allow me?
Thanks
joysleep said:
But if i connected the MHL with the s3. Would sound come out of my phone AND my TV or just my TV. If it justs comes out of my TV, then can i hook up my bluetooth headphones and listen to my video or it would not allow me?
Thanks
Click to expand...
Click to collapse
I think you already got a reply in the other thread on this, you should use subscriptions.
mertzi said:
I think you already got a reply in the other thread on this, you should use subscriptions.
Click to expand...
Click to collapse
It wasnt clear.
No1 knows the actual answer to this questions. Really frustraing
joysleep said:
It wasnt clear.
No1 knows the actual answer to this questions. Really frustraing
Click to expand...
Click to collapse
Ah ok sorry! Afaik you should be able to choose your headphones as primary audio source in the bluetooth settings. I know I can choose what I want to be output to my bluetooth headset, but I don't own an MHL adapter so I don't know about that. Someone with one should be able to try it, and if they don't own a bluetooth headset/pair of headphones they could try with wired ones and see what happens.
mertzi said:
Ah ok sorry! Afaik you should be able to choose your headphones as primary audio source in the bluetooth settings. I know I can choose what I want to be output to my bluetooth headset, but I don't own an MHL adapter so I don't know about that. Someone with one should be able to try it, and if they don't own a bluetooth headset/pair of headphones they could try with wired ones and see what happens.
Click to expand...
Click to collapse
I have recently received an MHL connector (5 pin type) and the samsung 11 to 5 pin adapter for it. I can confirm that if I plug my OTG cable into it, and then into my powered USB hub, I can get the MHL to work just fine, both video and audio. The OTG cable powers it just fine, but does NOT allow me to use other devices attached to the USB hub.
I am still researching. I suspect you need to bring all 11 pins off the phone with a splitter of some sort, or possibly wire data lines through the MHL. Probably not with the 5 pin MHL connector and 11 to 5 pin adapter, but with the full 11 pin MHL adapter. I am not up to that level of hardware hacking. I suspect whoever does it first can sell a BUNCH of them!
Oh, and I have a Moto Lapdock for my Raspberry Pi, and would love to hook my S3 to it too!
Scott