Related
Hello everyone !
Heres a new rom..
This rom is from taiwan made by Youzii.
- Build 18125
- No Cube, but TouchFLO and Touch Comm manager
- Including some tools and apps (Pocket RAR, psshutxp, pbar, and more!)
- Very stable and fast !
- Page Pool is 6 MB !
NOTE !
I have just updated this version and it works very well, BUT you might use the NVID WM5 rom before you flash this one, NOT the one which is included.. That made my phone start to boot loader..
Download Link:
Here
I have changed the files a little so they now look more like the ones we are used to..
http://da9l.4shared.com/
1. Under the EVO7 folder download both EVO7.part1.rar and EVO7.part2.rar
2. Begin with the extraction of part 1.. Run the exe thats the right for you
3. Now after flashing is done remain the pda unused and extract EVO7.part2.rar
4. Run Upgrade_Rom.bat and wait for its completion. Do as the utility tells you to
5. And now the rom should be installed !
Pictures in the bottom if the thread!
Thank You For ROM
All is OK
The page pool is 6mb.
Thank you ! will update it !
Thank you for sharing, Da9L!!
As in EVO7tw, Cube and HTCHome can be installed in EVO7en indepandantly with removable cab files later.^^
Visit http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en to download the long-waited Cube and HTCHome cabs now!!
Thank Support for the mirrors:
http://rapidshare.com/files/51991260/EVO7en.part1.exe
http://rapidshare.com/files/51991566/EVO7en.part2.rar
-------------------------------------------------------------------
How to falsh your device to EVO7：
-------------------------------------------------------------------
1.Flash PV_TEMP (download PV_Temp http://tom-love.net/Rom/Prophet/WM6....et_PV_Temp.zip )
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
-------------------------------------------------------------------
Wanna try EVO7tw (with removable Cube and HTCHome)?? Here is the link to the original thread:
http://www.mobile01.com/topicdetail.php?f=224&t=385791&last=3478621
Tips: ---------------------------------------------------------------------
1. The default region is Taiwan which can be changed at "Start\Settings\System\Regional Settings\Region.
2. Support Far-East characters including troditional Chinese, simplified Chinese, Japanese, and Korea, etc,. To display the characters properly please set the region accordingly at the same path above.
3. It's strongly recommanded to update the new version of G4 SIP Tweak, a third party application incorporated in EVO7en, for a better dispaly to the app.
4. The blue lines on the uppermost screen is an application to show battery and memory status on the left and right part respectively. Disable it by deleting pwrstat.lnk at the folder of Windows\Startup if it is not right to your eye^^|||
5. If you prefer the original contacts, disable the built-in PocketCM by assing the right soft-button to Contacts with Soft Key at Start\Settings\System.
6. No higher than 264MHz over-clock is recommanded for stability, though 274MHz works fine for some devices.
7. The clock on the upper menu bar can be changed to the battery icon by editing the value of registry as below:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell] "ShowTitleBarClock"=dword:0 >> battery display (1 = clock display)
8. Button 4 is yet to assign. Do it with Buttons at Start\Settings.
9. Edit the values of registry as below to modify the sensitivity of Touchflo (finger scrolling):
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings "SpeedHigh" (20 is recommanded) and "SpeedLow" (65 is recommanded).
10. To edit registry, you may like to run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
11. X-button, thanks to the freelancer contributing it, seems to take to built-18125 better than pBar 1.4. (my case is that there are always 20M or so left no matter how long the device runs)
12. For whom like to read Thai characters properly, please visit the EVO7en link to download EVO extFont.cab
13. Original IM (原生輸入法) installation:
Copy all files OriginalIM.zip into the Windows folder
Import the registry file PhonIM.zip (注音輸入法).
Chajeiim (倉頡輸入法) and Mboxcht (手寫板輸入法) installation:
Copy the AdditionalDll.zip files into Windows
Import All_Chtim.reg instead.
You'll get all three input methods at once.
OriginalIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48906&d=1188663728
PhonIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48907&d=1188663758
AdditionalDll >> http://forum.xda-developers.com/attachment.php?attachmentid=48908&d=1188663783
AllChiIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48909&d=1188663798
14. To get Chinese lunar calendar, change the value of the Dword, "ShowLunarCalendar", under "HKEY_LOCAL_MACHINE\Software\Microsoft\Calendar" from "0" to "1"
15. The letters chopped on the setting pages can be sloved by editing the registry as below: (Note: not for Chinese users)
[HKEY_LOCAL_MACHINE\nls] "SystemLCID"=dword:404 << change dword from 404 to 409
16. Users who are not good at modifying registry please install EVO ENGfix.cab to fix the letter-chopping problem on some setting pages.
http://forum.xda-developers.com/attachment.php?attachmentid=49966&d=1189363816
17. For whom who like to have the setting pages for HTCHome, please install EVO HTCHomeSettings.cab.
http://forum.xda-developers.com/attachment.php?attachmentid=49970&d=1189364038
18. Users who like to check your namelist with Celedial instead of the default SmartDialing, please modify the registry as below:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
change the path from "Ext"="\\windows\\phcanhtc.dll" to "Ext"="\\windows\\celedial1.dll" (reboot your device to get it^^)
--------------------------------------------------------------------------
Note: The Evo7 series supports devices listed as below:
* SPV M600
* Qtek S200
* i-mate JAMin
* Dopod 818 Pro
* Dopod 830
* XDA neo (O2 Germany)
* VPA Compact S (Vodafone Germany)
* TC 500 (T-Home Germany)
evo7 EN .....
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
dioxda2 said:
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
Click to expand...
Click to collapse
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
iiiox said:
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
Click to expand...
Click to collapse
Dear iiiox,
noted, set, enjoying now!! ^_^
Thai font display incorrect
Thai font cannot display on today screen, how can I solve this problem?
I already change regional setting to "Thai".
thanks
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
G4 SIP Tweak.cab
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
tb146 said:
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
Click to expand...
Click to collapse
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
mark_vip said:
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
Click to expand...
Click to collapse
Not totally sure what your point is. If it is that your device failed to upgrade from wm5 to EVO7, try the steps listed below.
How to falsh your device to EVO7：
1.Flash PVTEMP (you can find it at the forum everywhere, literally speaking^^")
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
iiiox said:
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Click to expand...
Click to collapse
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
fungsaikit said:
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
Click to expand...
Click to collapse
Haha!! Brother fungsaikit, I'm here only because Youzii's out of sight at the time being^^" You know that I can solve few [email protected][email protected] Only if Youzii ansers calls in person here....
BTW, why don't you try EVO7en^^?? It's even faster (though fewer applications like removable HTCHome and Cube at this moment^^)
Hi, please follow the following steps:
1. Flash the PV Temp Rom;
2. Install the Cert_SPCS cab to your device;
3. Install the EnableRapi cab to your device;
4. Double the file name EVO7.1 Part 1;
5. Choose 3 on the cmd screen;
6. Wait 20 minutes at least;
7. Disconnect the USB;
8. Press the soft-reset button on the bottom. Then press the camera button and command manager button simutaneously. When you see a few lines of words on the black screen, press the phone-calling button. You will see "FAT Format is completed".
9. Enjoy!
tb146 said:
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
Click to expand...
Click to collapse
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Hehehe, I am a bit lazy recently. Maybe because I flashed my 818 Pro at least 3 to 4 times a day before. Now the EVO7.1 is really fantastic. It is very stable and fast. The new method of calling out the cube can't be better in elsewhere. Also, I am playing with my new BT headset Sony HBH-DS220 these 2 days. Hehehe.... forgive me being a bit lazy to flash new ROM.
iiiox said:
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Click to expand...
Click to collapse
So sorry, cannot wait to flash so i miss to read it.
Thank you guys....
This program is for those of you looking for HTC Cube program which -
1) Runs on O2 ATOM
2) Which works fully without using FlashLite or FlashPlayer
3) Which is low in memory requirement and does not increase battery consumption.
4) Has a Contact page on cube that is fully working and integrates with HTC Home plugin
5) Which is tested on ATOM and is considered relatively 'stable' code
THIS IS ONLY TESTED ON O2 ATOM
NOTE: All other PDAs can try but please test it at your own risk and feedback if it works for you.
HTC Touch Cube working on O2 ATOM(WM6 AKU0.7.0)!
================================================================================
LATEST UPDATE - NOV 18th 2007
+++++++++++++
Touchflo Alpha 2
+++++++++++++
PRE-REQUISITE: This program needs HTC Home Plugin, HTC Music Plugin, and HTC AudioManager to be fully integrated.
The latest Alpha 2 cab file is downloadable now!
(See one of the attachments here labelled - Touchflo alpha 2.zip)
Instructions
1) Install this cab file
2) Delete APL, Biotouch, and HUB from the /Windows/Startup first to avoid black screen problem.
3) Soft-reset
Features in this cab file -
1) Finger activation of cube
2) Efrost's 'activation icon' at the top bar is no longer visible.
3) All efrost's finger scrolling features available and functioning.
FOOTNOTE:
1) You must uninstall the old version of this cab first. Then soft-reset before installing this one.
2) This cab does not include Touch Settings - for this feature, you can still download the Touch Settings V1.22.cab attached below.
3) You can ignore all the other archive information below to avoid confusing yourself!
4) You can ask for help in this thread but don't expect me to help you troubleshoot unless you're using an O2 ATOM!
5) Please share your ideas and findings here on how to improve it further.
=====================================================================================
TO GET FULL CONTROL MOVEMENT OF CUBE
THIS CUBE WILL NOT BE COMPLETE WITHOUT MENTIONING THE BREAKTHROUGH THAT KONA MADE FOR THE HTC CUBE ON NON-TOUCH DEVICES LIKE THE O2 ATOM. THANKS KONA AND GANG FOR DOING THIS!
To learn more, visit Kona's thread here: http://forum.xda-developers.com/showthread.php?t=343583.
NOTE: Kindly donate(any amount, no matter how small) to these WONDERFUL DEVELOPERS who solve so many problems for us in O2 ATOM!!!
=====================================================================================
ARCHIVE INFO - from previous postings.
Hi guys,
I've managed to get the HTC Touch Cube working with jiggs's WM6 AKU 0.7.0. Not sure if anyone was previously successful in doing this. But unfortunately, at the moment, it is using the ButtonFlo method of turning the cube.
I dont have the expertise to get this thing working using the Finger or stylus to get the touchscreen to turn the cube yet.
Maybe one of you geniuses out there will be able to take this one step further and get it working fully! (I'm hoping)
To get the HTC Cube working with finger touch-screen capability (using eFrost's FTouchFlo) - just follow the steps in post #150 - http://forum.xda-developers.com/showpost.php?p=1598731&postcount=150
The files needed for this installation is also located in this post.
============================
ALTERNATIVE INSTALLATION METHOD
============================
ALTERNATIVELY, if you want to configure using the long-way; and using the attachments below, please follow the steps listed here:-
INSTALLATION STEPS -
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
PART 2 - Customizing Your Cube using Touch Settings!
Step 1: Install Touch settings V1.22.cab, then soft reset.
Step 2: Go to windows\startup and delete file called "Mediahubmini"
Step 3: Soft reset (I don't think it's neccesary though, but i do perform
this step.
Step 4: OH YES! Also install the missing ICON files for the APLauncher - AL_xx_Touch.zip into a separate directory (eg. \Touch).
Step 5: Copy the same ICON files(from Step4) into \Windows. (these files were missing in Part1).
Step6 - Soft-reset and you should see everything working!
CHECKLIST ON HOW TO AVOID BLACKSCREEN AFTER YOU INSTALL THIS APPS
1) Make sure that you have HTC Home, HTC Audio Mgr & Plugin installed and activated in Today settings.
2) Make sure you install all the missing AP_xx_Touch.zip ICON files.
3) If you have Touch Settings program installed -
a) Make sure you DELETE MediaHubMini.lnk from \Windows\Startup &
b) Start Touch Settings and click SAVE to save the settings once after missing icons are installed.
Once you have Steps 1-3 done properly, just do a SOFT-RESET and the cube should be working.
NOTE: Below is a photo of Touch Settings V1.22.
( and here's the official link from the author - http://ww2.fatattitude.com/software/software-item.aspx?appid=10 )
If you're happy with his work, you can buy him a beer - http://www.fatattitude.com/buybeer)
Additional info available here - http://forum.xda-developers.com/showthread.php?t=324556
(Pls note that this is still in Alpha testing stage so install at your own risk)
ADDENDUM - (POSTED on OCT 16, 2007)
TOUCHSCREEN ACTIVATION FOR TOUCH CUBE
Thanks to efrost's FTouchFlo (Alpha 3 version) with application launcher function, I can now use my finger to 'activate' the cube without using button!
For efrost's program FTouchFlo, please refer to his posting and donate if you're happy with his contribution! Here's the link - http://forum.xda-developers.com/showthread.php?t=334965
Pre-requisite - you MUST have a working Touch Cube on yr ATOM.
Step 1 - Install efrost's FTouchFlo ( and follow his instructions to calibrate and then try making sure u can scroll).
Step 2 - Replace the default FTouchflo config file under /Program Files/FTouchFlo_a3/FTouchFloConfig.txt with the one I've posted here.
Step 3 - Restart FTouchFlo - under Programs, select Start FTouchFlo and then u try to test the scrolling.
Step 4 - You're ready to test the activation -
a) You must first put Ftouchflo into launcher mode (IMPORTANT STEP) - swipe your finger from down-to-up-and-down again in one swift motion. (you will hear a *beep* on your PDA to let you know that you've toggled into launcher mode.
b) Just swipe your finger from LEFT to RIGHT and then it will automatically launch the cube on your screen!
Step 5 - Once the cube is on yr screen, you can then continue to swipe from LEFT to RIGHT and be able to turn the cube.
TO ENSURE RESPONSIVENESS IN YOUR DEVICE
To ensure responsiveness in your device, do not specify too many applications to launch using gestures - I've modified FTouchFloConfig.txt to only launch the cube.
The touchscreen functionality for this Touch cube will improve as efrost improves his program!
Thanks efrost!
(Pls note that this is still in Alpha testing stage so install at your own risk)
NOTE: NO OFFICIAL SUPPORT IS PROVIDED FOR ANY OF THESE SOFTWARE POSTED HERE!
That good news if it can work. Will try it out when i'm free.
http://forum.xda-developers.com/showthread.php?t=333163
this is the one ur asking right? same touchflo? the author of that program is on that thread. He visited there & u may ask some question to him.
Hi mikewtw. May i know the installation steps?
wonder12 said:
Hi mikewtw. May i know the installation steps?
Click to expand...
Click to collapse
please try to read http://forum.xda-developers.com/showthread.php?t=328010 i never try to me also..
Installation steps I used to get Touch Cube working.
Here are the steps I used:-
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
Everything should work beautifully when you press the button for the old O2 Media Plus ( which has now been mapped to Touch Flo program).
Everything in the Touch Flo Cube should work.
And I believe there's also a Touch Flo Cube Customizer program available. I will try to repost it here if I find it working well.
I'm hoping someone will get the touchscreen interface working so that we can swipe and activate the cube using our fingers or stylus! Thats what I'm waiting for!
The ultimate "O2 Touch" is coming!
Mike
I will stick with my Iphone look O2 Atom, much cooler must say
Phone goes missing / Touch Settings V1.22 not working on this Touch Cube yet.
PROBLEM #1
I notice that my Phone button is missing from the HTC Home Plugin after I installed this Touch Cube. So instead of 6 buttons on the Home Plugin, I'm only left with 5 button!
Luckily the Touch Cube (using buttonflo) works and I can put my 9 favorite contacts in the contact page on the cube
When I reinstall Home Plugin again and reset, the 6buttons comes back, but my Touch Cube blanks out Then when I reinstall Touch Cube again, my Home Plugin is missing the Phone button...Oh well...
PROBLEM#2
Also, when I install Touch Settings V1.22, my Touch Cube blanks out when I try to launch it.
Tried installing Touch Settings before Touch Cube and vice-versa, but that didnt help either
If anyone can get Touch Settings V1.22 working with this Touch Cube, please post your files and installation instructions. THanks.
this touchflo is still on demo version, alot of programs have conflict here.
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Ultimate Chicken said:
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Click to expand...
Click to collapse
You must have HTC Audio Mgr and HTC Audio Mgr Plugin installed and also HTC Home Plugin running first.
Then install Touch Flo(alpha).cab and lastly the JTButtonFlo.cab file. Map a O2 Atom button to Touch Flo and then do a soft-reset.
After that, it should work.
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Ultimate Chicken said:
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Click to expand...
Click to collapse
the CREATOR IF THIS program is BYKA.. he is on this thread
Try this in your ATOM..Touchflo...
http://forum.xda-developers.com/showthread.php?t=333163
Byka's Cool Touchflo 3D Cube
http://forum.xda-developers.com/showthread.php?t=328010
try to ask question on that thread..
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Ultimate Chicken said:
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Click to expand...
Click to collapse
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
gives black screen , will wait for touchflo rom ,if it is possible
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
Click to expand...
Click to collapse
I can't, because it blackscreens my device. <.<
I'll try again when I get home, tho, but don't expect a miracle. This needs to be worked on.
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Exellent
jiggs said:
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Click to expand...
Click to collapse
I can smell TouchFlo on our MightY AtoM soon
Windows Mobile 6.1 Professional AKU 1.0.0
5.2.19199 Build 19199.1.0.0 WWE (ENG)
v1g
Author:
- pArtizAn (Erofich)
Thanks to:
- Alex[DFR] - WM6.1 Pro XIP, a lot of useful info
- GreateVK - betatesting, advices, SmartPhone->PocketPC device id changing, rewritten keyboard driver
- Jony_aa - betatesting
What's included:
- NET Compact Framework v2.0
- xT9 Eng/Rus
- StarTrek settings applet
- Short Home button press to Win
- Long Home button press to OK/Close
- MS Office deleted
- Windows Live deleted
- Esmertec Jbed 3D java
Known issues:
- software keyboard required to write is some text fields
How to flash:
0) READ A README.DOC FILE located in RUU folder in the archive!!!
1) make an application unlock
1.5) make a SuperCID (optional)
2) copy content of SSPL folder to the root (\ folder) of your device
3) run SPL.lnk from the root (\ folder) of your device
4) run ROM Update Utility.exe (from RUU directory in the archive) on your PC
5) follow the instructions
6) wait until flash process will be completed
7) READ A README.DOC FILE located in RUU folder in the archive!!!
You can flash it over ANY (Qtek, Dopod or Cingular) rom!
Download:
https://disk.yandex.ru/d/NuX0TfNy3Przs
REUPLOADED in 2023
Erofich!
Looks amazing... Although the link is dead
Churchill said:
Erofich!
Looks amazing... Although the link is dead
Click to expand...
Click to collapse
link fixed
OK I downloaded it via the russian Forum...
It is mentioned that some fields need onscreen keyboard... Do you need it in messaging?
And how fast is the device with the PRO version??
link is dead again
It's WM61ProV1g.7z, not WM61Prov1g.7z.
Anyway, it's finally here, cant wait to flash it. Totally awesome.
I was waiting for this but I cannot flash right now. Can't wait to find time for flash and test.
Thanks a lot Erofich, you are the best!
Thank You!
It's already running on my Qtek 8500! At moment I've done only my first phone call with new OS
Thank You!!
im backing up my phone now and i will be joining the WM6.1 PRO community soon! ETA 90min. thanks Erofich!
backup done! preparing to flash... fingers crossed..
Beautiful ROM
Not that i dislike Russian but the Calendar and Date/Time show Russian and the rest is in English. Can this be changed?
Really nice ROM
I like it a lot. Everything with Active Sync seems to be working great. Great work. I would like to donate something via paypal. is this possible.
woobieman75 said:
Not that i dislike Russian but the Calendar and Date/Time show Russian and the rest is in English. Can this be changed?
Click to expand...
Click to collapse
i think you can change the language in regional settings. im not 100% sure, my phone is still backing up. cant wait to try it.
woobieman75 said:
Not that i dislike Russian but the Calendar and Date/Time show Russian and the rest is in English. Can this be changed?
Click to expand...
Click to collapse
Change it to yours in regional settings
most likely, you only need to change it in settings-system-regional settings
Update on Russian Language
Update: Sorry it was be default in Russian. I just set it to English.
Why should somebody change from standard WM 6.1 to WM 6.1 Pro? - The Pro Version has not so much funktiones - as i see...
What are the advantages of the new version?
Thanks!
Bug(s) List
OK i finally flashed WM6.1 PRO to my startrek. so *****ing as always (sorry Erofich, i just want to help you guys iron out the bugs), here is the bugs list. (to be updated as frequently as needed, so please check back this post)
Bug List (updated 20th Mac 08)
=======================
1. Microphone AGC does not work. enabling will only get a white display with nothing (doesnt hang the device though). and when you check it again, it is still not enabled.
UPDATE : Will be removed in future version
2. When in fake cursor mode, if you leave the device there for a while and it does into standby, the device wakes up in a black dark screen, with only cursor working and the rest of the buttons disabled. cannot access anything too. (i have the owner information displayed on power up optoion checked)
UPDATE : According to Erofich, new cursor coming soon!
3. Camera software is not displaying properly. no menu can be seen, or message from the software cannot be seen. settings keys not working too.
UPDATE : Currently in development by Erofich
4. I noticed bluetooth light is flashing when device is switced on, however, when the OS is fully loaded, bluetooth is not ON. not really an issue, just an observation.
Suggestion(s)
==========
1. back key for smartphone to be enabled so we can map it to close/OK instead of having to hold home key. (will it affect phone dialing backspace? im not sure)
UPDATE : As suspected, nothing can be done here. Holding home key for OK/Close is a bit troublesome,but i guess we just have to sacrifice this for WM PRO
2. where can i download abode reader LE 2.00.261818 cab that i can choose installation path? can you please make a cab for this program?
Annoying Issues with using WM PRO without touchscreen ( Not the author's fault )
=============================================================
1. Old programs that are not designed with soft key feature is a really a PAIN. have to depend a lot on fake cursor. hopefully GreatVK will have a better solution for cursor.
UPDATE : Discovered an easier way of minimizing. double click on home key will minimize any running program.
P/S :All these testings and getting used to is giving me a headache.. will do further testings later. Great work Erofich and your team! By the way, you just appeared in engadget! http://www.engadget.com/2008/03/20/windows-mobile-6-1-professional-running-on-an-htc-startrek/
Witch Type of t9 i have to install? The default cab for smartphone doesen't work...
slavix said:
Witch Type of t9 i have to install? The default cab for smartphone doesen't work...
Click to expand...
Click to collapse
this is WM6.1 PRO, smartphone softwares wont work with it (not fully compatible)
alexnvidia said:
this is WM6.1 PRO, smartphone softwares wont work with it (not fully compatible)
Click to expand...
Click to collapse
Yes tes.. but i think the Xt9 for pocket pc works.. but witch pack of xt9? I try something... i try to change mssp2 and statdict.0409 and dictprob.0409 file to italian.. but i have no results! My girls write and write message.. I think i have to Keep his hands occupied with my one eyed snake.. hahahah!
I started this thread out in the Leo forum but since these hacks are not really device (or resolution, not entirely sure though) dependent might as well post them for all to see.
Alarm Hack Home tab
Description:
Changes the alarm shortcut on the Home tab to another application than the default windows\HTC one.
The app prompts you a couple of questions which determine where your alarm application is installed, and adjust the shortcut accordingly. Make sure you type the names in correctly because typo's (case or errors) will produce an incorrect shortcut. It will create either a manila files or a cab.
Supported Applications:
- CradleAlarm
- G-Alarm
- Klaxon
- SPB Time
Supported manila versions:
- 2.1 Sense
- 2.5 Sense
- Others? (not actively supported)
How it works:
It's done via a batch script. This does not work if the application folder is placed somewhere that has a space in the filename (e.g. C:\Wrong File Path\Alarm_Hack_Home_Tab -> C:\Right_File_Path\Alarm_Hack_Home_Tab). It's not just a matter of shortcut creation, this hack is done in lua.
Changelog:
v1.1
- Made it foolproof by adding various checks
- Combined the 2.1 and 2.5 version to a single script
- Added choice.exe to the Tools folder since older versions of windows do not have this
v1.2
- Added support for CradleAlarm
v1.3
- Added simple logging
v1.4
- Supports manila 1922 (manila from dec 2009) but not the lower versions.
Calendar Hack Home tab
Description:
Changes the calendar shortcut on the Home tab to another application than the default windows\HTC one.
The app prompts you a couple of questions which determine where your alarm application is installed, and adjust the shortcut accordingly. Make sure you type the names in correctly because typo's (case or errors) will produce an incorrect shortcut. It will create either a manila files or a cab.
Supported Applications:
- ThumbCal
- PocketInformant
Supported manila versions:
- 2.1 Sense
- 2.5 Sense
- Others? (not actively supported)
Changelog:
v1.0
- Initial release
Sense hacks: Download
- Alarm Hack Home Tab v1.3 (Lower than 1922)
- Alarm Hack Home Tab v1.4 (1922 and up)
- Calendar Hack Home Tab v1.0
K00l I'm in the news
Thanks for sharing 12aon.
How do I provide the app path if it's in "\Program Files\agepe\G-Alarm" ?
Do I enter ""\agepe\G-Alarm" or just "G-Alarm" ?
Thanks.
wmserver said:
Thanks for sharing 12aon.
How do I provide the app path if it's in "\Program Files\agepe\G-Alarm" ?
Do I enter ""\agepe\G-Alarm" or just "G-Alarm" ?
Thanks.
Click to expand...
Click to collapse
First step is the name of the storage card, second the name of the program files folder, third the name of the alarm application and last whether you want a cab or just the manila files. But it's all pretty clearly explained in the command prompt,
12
Edit: Question though, the latest official Rhodium WWE ROM (3.44) does have sense 2.1 right?
Works like a charm on HTC Touch Diamond 2 (Topaz) with WM 6.5 (upgraded WM 6.1 with HTC official ROM)
Thank you 12aon !!!
Jack_Surfer said:
Works like a charm on HTC Touch Diamond 2 (Topaz) with WM 6.5 (upgraded WM 6.1 with HTC official ROM)
Thank you 12aon !!!
Click to expand...
Click to collapse
Good to know, does it have sense?
@everyone: I'm willing to support more alarm applications, but I need to know the default install path,
12
First sorry for my english
Fantastic!! it works perfect in my Touch pro VGA with manila 2.5 and Tael Rom. Shortcut to G-Alarm!
Congratulations!!
Man, is it possible to make another modification on manila shortcut.. let me tell you what I want, I instaled a second today screen, than I instaled the weather pannel application, Than I instaled the WP-Activate, that creates a shortcut to the main screen of weather panel.
I want to link the weather button located in the midle of the clock on home tab, to the main screen of weather panel or to the second screen, instead of the weather panel.
I am not a developer, so if you can help,
Again sorry for my english.
Thank you!
danilovac said:
First sorry for my english
Fantastic!! it works perfect in my Touch pro VGA with manila 2.5 and Tael Rom. Shortcut to G-Alarm!
Congratulations!!
Man, is it possible to make another modification on manila shortcut.. let me tell you what I want, I instaled a second today screen, than I instaled the weather pannel application, Than I instaled the WP-Activate, that creates a shortcut to the main screen of weather panel.
I want to link the weather button located in the midle of the clock on home tab, to the main screen of weather panel or to the second screen, instead of the weather panel.
I am not a developer, so if you can help,
Again sorry for my english.
Thank you!
Click to expand...
Click to collapse
Depends on the lua file, but I thinks it doable. It would however be linked to the weather app directly. Not sure I understand exactly what it is that WP-Activate does,
12
Ehi 12aon, any chance this would be compatible to Klaxon?
12aon said:
Depends on the lua file, but I thinks it doable. It would however be linked to the weather app directly. Not sure I understand exactly what it is that WP-Activate does,
12
Click to expand...
Click to collapse
let me try to explain, the weather panel is a today plugin, when you click on this today plugin, it opens the main screen of weather panel, where you have more information about the weather. The WP-Activate creates a shortcut on the start menu that allows to acess the main screen of weather pannel directly, without clicking on the today plugin... so it is not necessary to change from Manila to second today screen, just to click on the today plugin, I just use the shortcut.
Now what I am asking, is to use the weather button in home tab to link directly to the weather pannel main screen
I know that is dificult to understand my english, but if it is not clear I can try again...
thank you
teorouge said:
Ehi 12aon, any chance this would be compatible to Klaxon?
Click to expand...
Click to collapse
Sure like I said I need to know the default install path (e.g. \Program Files\Khoush\Klaxon.exe)
danilovac said:
let me try to explain, the weather panel is a today plugin, when you click on this today plugin, it opens the main screen of weather panel, where you have more information about the weather. The WP-Activate creates a shortcut on the start menu that allows to acess the main screen of weather pannel directly, without clicking on the today plugin... so it is not necessary to change from Manila to second today screen, just to click on the today plugin, I just use the shortcut.
Now what I am asking, is to use the weather button in home tab to link directly to the weather pannel main screen
I know that is dificult to understand my english, but if it is not clear I can try again...
thank you
Click to expand...
Click to collapse
I can see what I can find out. This would however require me to write entirely new script (which is fine) but I don't have that kind of time now. I'll keep you posted,
12
12aon said:
Sure like I said I need to know the default install path (e.g. \Program Files\Khoush\Klaxon.exe)
12
Click to expand...
Click to collapse
It's just "\Program Files\Klaxon\Klaxon.exe".
Done! 10 chars...
12aon said:
I can see what I can find out. This would however require me to write entirely new script (which is fine) but I don't have that kind of time now. I'll keep you posted,
12
Click to expand...
Click to collapse
Great, let me know your progress, than I try to make you a donation if it works!
danilovac said:
Great, let me know your progress, than I try to make you a donation if it works!
Click to expand...
Click to collapse
I am going to need the default install path of the application you would like to open though,
12
BTW: is this for 2.5 or 2.1 manila? I could be incorrect but I don't think anything happens on 2.1 Sense when you hit hit the weather on home tab. If it does please tell me the manila version you are using.
12aon said:
I am going to need the default install path of the application you would like to open though,
12
Click to expand...
Click to collapse
Are you talking about weather panel? I instaled it in device, at \Program Files\MarsWare\WeatherPanel
danilovac said:
Are you talking about weather panel? I instaled it in device, at \Program Files\MarsWare\WeatherPanel
Click to expand...
Click to collapse
And the manila version? 2.5 or 2.1?
12aon said:
And the manila version? 2.5 or 2.1?
Click to expand...
Click to collapse
sense vga 2.5
I am having problems with the cab creation, it only creates the lua file and after asking to create cab or manila file, gets a " "CHOICE" not recognized as internal or external comand. press any key to cotinue" and then comand promt closes.
what can I do?
Thank you very much
Spanish oficial ROM, manila Sense 2.1
The "Alarm_Hack_Home_Tab_2.1" is installed in C:/Alarm_Hack_Home_Tab_2.1
File path: //archivos de programa/ageye/G-alarm
in main memory
Works a treat...
Thanks for this..
Works a treat on SHep's Rom for Raph together with 12icons shortlist an allbackgrounds..
Was looking for a way to hook g-alarm to alarm button...Well done
onomico said:
I am having problems with the cab creation, it only creates the lua file and after asking to create cab or manila file, gets a " "CHOICE" not recognized as internal or external comand. press any key to cotinue" and then comand promt closes.
what can I do?
Thank you very much
Spanish oficial ROM, manila Sense 2.1
The "Alarm_Hack_Home_Tab_2.1" is installed in C:/Alarm_Hack_Home_Tab_2.1
File path: //archivos de programa/ageye/G-alarm
in main memory
Click to expand...
Click to collapse
1. What version of windows do you run? 2. Can you tell me the complete pathname is where you extracted the folder? if I can't reproduce your error, I can't fix it,
12
--------------------------------------------------
JWMD Armids 1.0a
Ever want to change the number of columns in your Windows Mobile 6.5/x Start Menu without doing a lot of hardwork? Here's another tool to do the job for you.
Armids can change your the number of columns in your Windows Mobile 6.5/6.5.x Start Menu or Edit the Start Menu Item look or even change the Selection Background image!
--------------------------------------------------
Armids supports the ff resolutions:
QVGA
WQVGA
SqVGA
VGA
WVGA
Armids has this ff features:
Change the number of columns
Portrait
Landscape
Change Selection background not yet implemented
Restor original GridScene file from custom ROM or Original Firmware
- Backup occurs upon first use of the application.
--------------------------------------------------
Using Armids
Please make sure that your device is currently in Portrait mode.
KNOWN PROBLEMS
No effect after reset
You ROM uses custom GridScene that was setup in registry. I have not yet got any answer on Chefs thread about setting this up. So if you have any idea, please share.
This registry key has something to do with it "[HKEY_LOCAL_MACHINE\Security\Shell\StartMenu] "CustomGridForm"="StartMenuCust"
History said:
February 27, 2011
- Landscape support
- Fixed some null errors when reading the CPL file.
Click to expand...
Click to collapse
Guys when reporting an error
Kindly include this details:
Device Brand and Model
ROM, ROM Language, ROM Link
Error Message and Screenshots
What you did before the error shown.
tried it, just letting u know it doesn't work on touch pro2 running 6.5
orlandojumpoff said:
tried it, just letting u know it doesn't work on touch pro2 running 6.5
Click to expand...
Click to collapse
you might be using custom gridscene that was setup in registry which I tried to ask in Chefs thread.. and still no answer from them
Thanks for the feedback.
very nicely done. What program were you using in the first video to control your device with your pc? I've used several. Some I like more than others but they all have their faults/lack of capability.
scott8813 said:
very nicely done. What program were you using in the first video to control your device with your pc? I've used several. Some I like more than others but they all have their faults/lack of capability.
Click to expand...
Click to collapse
I was just using an Windows Emulator from Visual Studio.
but if you want a desktop app to control the screen of your winmo device; you can use My Mobiler. It's very very free!
Nice job seeing the videos, what about making it for HVGA aswell, tried it with hope but no luck on my HD mini
Nullstring said:
KNOWN PROBLEMS
No effect after reset
You ROM uses custom GridScene that was setup in registry. I have not yet got any answer on Chefs thread about setting this up. So if you have any idea, please share.
This registry key has something to do with it "[HKEY_LOCAL_MACHINE\Security\Shell\StartMenu] "CustomGridForm"="StartMenuCust"
Click to expand...
Click to collapse
That registry key tells the start menu engine to use a "custom" .cpr layout for the Start menu. The normal filename of for the start menu layout is StartMenu_GridScene_480x800.cpr , but if you have the registry key enabled, then windows looks for StartMenuCust_480x800.cpr . HTC does this by default in their stock ROMs, in order for windows to load their custom .cpr files. A pure windows ROM will look for a StartMenu_GridScene_480x800.cpr for example.
Some chefs choose not to mess with that and just StartMenuCust_480x800.cpr gets used. *I* for example, take that key out in my ROMs and I use StartMenu_GridScene_480x800.cpr . So you just have to account for both All you have to do is look for the registry key and if it's not there, then it's safe to say StartMenu_GridScene_480x800.cpr is the layout used.
Testing on HD2 T-mobile
Does not work on HD2 T-Mo Even after reset.
Running
Manila version 2.5
Rom/2.13.531.1 (90963) WWE
Hi Nullstring,
very well done, really. I have also a future request:
- what do you think about background changing?
-- That will be the right function for the CHTArtwork thead. Because i have to many ideas and can not do all the work .
Not working
xperia x1
wm 6.5.3
rom 826x wwe
It doesn´t work in HD2 European, ROM HTC 1.66.
Humongus1 said:
Does not work on HD2 T-Mo Even after reset.
Running
Manila version 2.5
Rom/2.13.531.1 (90963) WWE
Click to expand...
Click to collapse
So...I think this would be a great add on to our HD2's. Is there going to be an update?
hi nice app. but sadly dosent work on HD2 , hope works in a future cose is a god app to have.
I got it working on my European HD2 (Factory ROM) by editing the registry value - as mentioned in an earlier post in this thread. As suggested I changed the registry key HKLM\Security\Shell\StartMenu] "CustomGridForm" to say "StartMenuCust" instead of "StartMenuCust". after a soft reset the program worked.
simonwoods33 said:
I got it working on my European HD2 (Factory ROM) by editing the registry value - as mentioned in an earlier post in this thread. As suggested I changed the registry key HKLM\Security\Shell\StartMenu] "CustomGridForm" to say "StartMenuCust" instead of "StartMenuCust". after a soft reset the program worked.
Click to expand...
Click to collapse
ok my register key now is
HKLM\Security\shell\startmenu "CustomGridForm" = StartMenuCust
what do i have to chage from this register key to make the JWMD Armis work? becouse i didnt get what u said .
hi guys!! am so sorry for this issues. Just got back from vacation!
I'll see what I can do tonight!
for the mean time. the fix for this is..
if you have stock rom or your chef did not change any graphical changes in the start menu (other than number of columns) then:
create/update this registry
[HKLM\Security\shell\startmenu]
CustomGridForm="StartMenuCust"
to
[HKLM\Security\shell\startmenu]
CustomGridForm="StartMenu"
Hey just wanted to say thanks, very handy little app. Works fine for me on my TP2 running MightyRom official. Keep up the great work!
Nullstring said:
for the mean time. the fix for this is..
if you have stock rom or your chef did not change any graphical changes in the start menu (other than number of columns) then:
create/update this registry
[HKLM\Security\shell\startmenu]
CustomGridForm="StartMenuCust"
to
[HKLM\Security\shell\startmenu]
CustomGridForm="StartMenu"
Click to expand...
Click to collapse
OK,i will install it once again on my hd2 and try your modification...
It's me again,it didn't work and showed me this error msg below...