A couple of questions from me, would be grateful for help.
1. Can Light'ning rom V2.6 be flashed from CWM?
2. When I boot into CWM recovery its says "signature verification failed" how do I fix this?
Thanks.
Sent from my GT-I9100 using xda premium
00778692 said:
A couple of questions from me, would be grateful for help.
1. Can Light'ning rom V2.6 be flashed from CWM?
2. When I boot into CWM recovery its says "signature verification failed" how do I fix this?
Thanks.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Turn off the signature verification in the CWM options I dont remember where it is but you will find it if you dig deep!
All roms in .zip format can be flashed via CWM!
For more info read the thread by the creator and try to follow instructions!
Related
Hi..
i am new here and i have one question..
How to install any rom..when i go to the recovery i cant find install zip from sd card....any idea?
Tnx
Sent from my GT-I9100 using XDA App
probably u have the standard kernel and no custom kernel with clockwork mod on your phone. "install from zip" is only supported in cwm
dzontra11 said:
Hi..
i am new here and i have one question..
How to install any rom..when i go to the recovery i cant find install zip from sd card....any idea?
Tnx
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
To install a ROM you MUST read the instructions in the thread where you got it. It's not just 1 procedure for all different ROMs.
Seriously, if you've not read the installation instructions in the ROM thread, DO NOT try and install it!!!
Try to understand ,,my English its not good enough..
Also ,,i never have a Galaxy before (only HTc phones) and flasing and root its totaly diferent then Htc....so because of that i need help.
TNx
Hello
I'm having problems installing Android Revolution HD 12.0 ROM. I have installed Jelly Bean on my s3. When i'm trying to install this rom it shows me installation aborted. Also i've tried Omega rom to install but same thing happens again. Could someone provide me any help
Thanks
Regards
You need to be rooted and CWM installed to install Android Revo HD
Sent from my GT-I9300 using xda premium
My phone its rooted...
Sent from my GT-I9300 using xda premium
you need to install CMW on your phone first before you can install custom roms
I jave installed CWM. Otherwise u couldnt receive installation abort.
Sent from my GT-I9300 using xda premium
When you are in Recovery Mode, do NOT choose "apply update from sdcard" instead, choose "install zip from sdcard"
Sent from my GT-I9300 using xda premium
Im not applying update.
Sent from my GT-I9300 using xda premium
Why multiple same question posts why not ask in the ARHD question and answers thread .
Repeat the usual answer is one the download is bad or two the user fails to follow instructions are 99% of install faults.
jje
About the instruction im 100% sure that ive done them in right way. But the problem is that im recieving the same error in omega.
Sent from my GT-I9300 using xda premium
So, go through step by step what you do. It's easier to suggest fixes if we have all info instead of single line comments...
You said it's rooted, Are you using a Samsung rom with an exfat sd card or a CM rom with an exfat card, Is the card formatted fat32?
What steps do you do when you flash a rom, internal sd card or external?
Clean install or dirty?
elektron12 said:
About the instruction im 100% sure that ive done them in right way.
Click to expand...
Click to collapse
And yet you continue to post here <smh>
elektron12 said:
About the instruction im 100% sure that ive done them in right way. But the problem is that im recieving the same error in omega.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Find out what is going qrong by looking at the recovery logs..after a failed install..reboot the phone..use any root enabled explorer to go into cache》recovery and open last install..then read it and find the line where the installation aborts..post the error here..maybe then we can help..
Just writing i am not able to install will notbget you any help...
sent from here, there, somewhere!!
Hello guys,
When i flash the rom Cyanogen mod, i have got this output:installation aborted. What is problem ?
Thanks
gigitux said:
Hello guys,
When i flash the rom Cyanogen mod, i have got this output:installation aborted. What is problem ?
Thanks
Click to expand...
Click to collapse
You did not come from stock ics but from custom rom. Just read the instructions.
Sent from my ST25i using xda app-developers app
troullis2004 said:
You did not come from stock ics but from custom rom. Just read the instructions.
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
How do I install correctly cyanogenmod ?
Is it so hard to read the title of the first few threads ?
Thread moved to Q & A section, consider yourself warned.
hey guys, i have 2 simle maybe stupid questions but i would really apprecciate an answer:
1. can some tell me the difference between the fxp-144a-kumquat and fxp144-kumquat; what does that "a" mean?
2. if somebody knows if cm9 for xperia u has inbuild cwm or some recovery; and if yes, what recovery?
1.144a means it is later version than 144
2.It has CWM 6
Sent from my MT27i using xda app-developers app
installation aborted
Hey guys. I too am getting this same "aborted" message. I will admit, I had a custom ROM installed, but then I rebooted into the backup that cwmrecovery had created from the original Samsung ROM. It was from there that I tried to install the cyanogenmod. No luck... why? I followed all the instructions...
Guys, to install CM you must have Unlocked bootloader, stock ICS, CWM installed. Put the zip into your memory, reboot in CWM and install the zip, wipe data, cash and dalvick cashe and reboot.
pure2maestro said:
Hey guys. I too am getting this same "aborted" message. I will admit, I had a custom ROM installed, but then I rebooted into the backup that cwmrecovery had created from the original Samsung ROM. It was from there that I tried to install the cyanogenmod. No luck... why? I followed all the instructions...
Click to expand...
Click to collapse
Flash the boot.img from the CM9 zip using fastboot then flash the Rom
Tapatalked !
K thanks. I ended up fixing it by upgrading the new clockwork mod touch version. I think its required for cyanogen mod 10.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hi all,
I realize this issue must have been asked before but I couldn't find the fix through the forum.
I'm trying to flash my Galaxys S3 (I9300 International Version) but nothing seems to work.
I go into recovery and try to unzip the latest CWM (here) but all I get is a 'signature verification failed'.
I try to install CWM recovery through the app but it says 'an error occured while flashing your recovery'.
When I try to flash this ROM (here), CM11, from recovery, after a full factory reset I get 'failed to verify whole-file signature' & 'signature verification failed'.
So that leaves me stuck at the beginning ...
Can anyone help?
Thanks in advance!
Senorcoco said:
Hi all,
I realize this issue must have been asked before but I couldn't find the fix through the forum.
I'm trying to flash my Galaxys S3 (I9300 International Version) but nothing seems to work.
I go into recovery and try to unzip the latest CWM (here) but all I get is a 'signature verification failed'.
When I try to flash this ROM (here), CM11, from recovery, after a full factory reset I get 'failed to verify whole-file signature' & 'signature verification failed'.
So that leaves me stuck at the beginning ...
Can anyone help?
Thanks in advance!
Click to expand...
Click to collapse
Lemme guess. U are on stock recovery.
Sent from my GT-I9300.
Give a thank if i helped you.
JellyYogurt said:
Lemme guess. U are on stock recovery.
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
I am, but I can't get into CMW recovery either, not through the app.
I just get an error when it reaches a 100%.
Should I buy the touch version from the store?
Senorcoco said:
I am, but I can't get into CMW recovery either, not through the app.
I just get an error when it reaches a 100%.
Should I buy the touch version from the store?
Click to expand...
Click to collapse
U cannot flash tat zip file from the link u posted first with stock recovery. Tat must be flashed from cwm recovery. Use ROM manager from play store. Then flash the recovery zip file then the rom.
Sent from my SM-N9005 using xda app-developers app
Give a thank if I helped you.
JellyYogurt said:
U cannot flash tat zip file from the link u posted first with stock recovery. Tat must be flashed from cwm recovery. Use ROM manager from play store. Then flash the recovery zip file then the rom.
Sent from my SM-N9005 using xda app-developers app
Give a thank if I helped you.
Click to expand...
Click to collapse
I have installed ROM manager, but the app doesn't let me flash or do anything.
It gives me an error when I select Flash ClockworkMod Recovery ... an error occured while flashing your recovery
But no further info ...
Senorcoco said:
I have installed ROM manager, but the app doesn't let me flash or do anything.
It gives me an error when I select Flash ClockworkMod Recovery ... an error occured while flashing your recovery
But no further info ...
Click to expand...
Click to collapse
Are u rooted?
Sent from my SM-N9005 using xda app-developers app
Give a thank if I helped you.
JellyYogurt said:
Are u rooted?
Sent from my SM-N9005 using xda app-developers app
Give a thank if I helped you.
Click to expand...
Click to collapse
:cyclops:
I just discovered that I skipped that crucial step...
What is the fastest/easiest way to root your Galaxy S3?
Thanks for your help
Senorcoco said:
:cyclops:
I just discovered that I skipped that crucial step...
What is the fastest/easiest way to root your Galaxy S3?
Thanks for your help
Click to expand...
Click to collapse
Found it and managed to flash!
I just needed to ROOT
Thanks!
Senorcoco said:
:cyclops:
I just discovered that I skipped that crucial step...
What is the fastest/easiest way to root your Galaxy S3?
Thanks for your help
Click to expand...
Click to collapse
Its all in the faqs and guides .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
Senorcoco said:
Found it and managed to flash!
I just needed to ROOT
Thanks!
Click to expand...
Click to collapse
You are welcome
Sent from my SM-N9005 using xda app-developers app
Give a thank if I helped you.
You need to flash CWM through Odin in order to flash other stuff (.zip file to root, etc.). You can dig up guides on the internet.
Jacky0501 said:
You need to flash CWM through Odin in order to flash other stuff (.zip file to root, etc.). You can dig up guides on the internet.
Click to expand...
Click to collapse
Correction. U nid ROOT to use cwm
Sent from my SM-N9005 using xda app-developers app
Give a thank if I helped you.
Hello,
I download the rom, did a megawipe, then tried installing the rom but the installation failed in the recovery itself. Can anybody please help me with some solution?
Tell us wat it said.
Sent from my GT-I9300 using xda app-developers app
If it I'd status 6 error5 you have to go back to philz touch recovery 6.15.4 or 6.19.4.. and in install zip option click don't allow binary update...
Sent from my GT-I9300