Recently I unlocked my phone's boot loader & I install Hybrom v16.
I don't know why but my phone just cut off the call even incoming or outgoing after 15s sometimes about 46s.
I try not to touch the phone when I call but it still cut off like that!!!
My phone is Sony Ericsson Live With Walkman WT19i.
I have the same phone but I have not experienced this problem.
Did you try wiping data, cache partition and dalvik prior to installing hybrom?
What kernel are you using?
I had Hybroman ROM on my LWW also, but never experienced such problem...
Does the screen turn off during the call?
melander said:
I have the same phone but I have not experienced this problem.
Did you try wiping data, cache partition and dalvik prior to installing hybrom?
What kernel are you using?
Click to expand...
Click to collapse
I did all the thing before install, I use kernel of bbooff
http://forum.xda-developers.com/showthread.php?t=1440161
This is the link!!!
@someguyfromhell: the screen turn off during the call also
On Hybrom's thread, on the 1st post, Bbooff gave a link to download an attachment which is the Proximity Fix, download that and flash it to your phone through CWM or try the Ultimate Proximity Fix.
BudgyN1 said:
On Hybrom's thread, on the 1st post, Bbooff gave a link to download an attachment which is the Proximity Fix, download that and flash it to your phone through CWM or try the Ultimate Proximity Fix.
Click to expand...
Click to collapse
There is no fix for my WT19i, so which one should I choose?
I thought there was a fix for the Lww. Go to his thread and post your problem. Maybe Bbooff might have a solution.
Related
hi, I just installed this custom rom on my x10i, it went all fine, but problem is that I no longer have internet connectivity. 3g won't work (I can turn on, but it won't show, and I can't download configurations from where it was previously, nothing shows up under settings>sony ericsson) and also, wi-fi isn't working. whenever I try to turn it on, it says "error" and won't turn on.
what to do? this rom is awesome, impressively fast than stock 2.3 on my x10, but without internet, it's useless....
thanks in advance
fael097 said:
hi, I just installed this custom rom on my x10i, it went all fine, but problem is that I no longer have internet connectivity. 3g won't work (I can turn on, but it won't show, and I can't download configurations from where it was previously, nothing shows up under settings>sony ericsson) and also, wi-fi isn't working. whenever I try to turn it on, it says "error" and won't turn on.
Click to expand...
Click to collapse
Have you done dalvik-cache wipe and erased cache partition? Also,are you on .71 baseband?
For wifi, have you flashed its kernel modules?
fael097 said:
... , but without internet, it's useless....
Click to expand...
Click to collapse
Your opinion But I am using same ROM without data plan and I am happy Sometimes wifi in restarnts in the streets are enough and free
The wifi could also mean that you havent flashed your roms wifi modules zip normally done in xrecovery
Sent from my CM7 Zmod / doomkernels v6 UL BL X10!
(And all that without bricking it) so far atleast.
HeliumX10 said:
Your opinion But I am using same ROM without data plan and I am happy Sometimes wifi in restarnts in the streets are enough and free
Click to expand...
Click to collapse
if I only had wi-fi. but I don't have any kind of internet right now heh
I did everything I was supposed to:
Factory Reset (Full wipe)
Wipe Cache Partition
Wipe Dalvik Cache
then I installed the rom, and flashed the FTF package
it says baseband 2.1.71 and kernel 2.6.29-00054 and etc. is that right?
the only thing I flashed was this FTF file. do I have to do anything other than that? idk how to flash my roms wifi modules, really new to this thing.
thanks guys
now I can't enter xrecovery anymore... so I went to troubleshooting:
Q: I'm experiencing problems with my xRecovery?
A: Make sure you have the latest version of xRecovery if Wolf hasn't included it yet.
You can get it HERE. Flash this over current recovery and should be fixed.
Click to expand...
Click to collapse
but there's only a .zip version of the xrecovery, I can't flash it through flashtool. and I obviously can't enter xrecovery to install xrecovery again. god this is confusing. what to do?
Suggest Back from Beginning
fael097 said:
now I can't enter xrecovery anymore... so I went to troubleshooting:
but there's only a .zip version of the xrecovery, I can't flash it through flashtool. and I obviously can't enter xrecovery to install xrecovery again. god this is confusing. what to do?
Click to expand...
Click to collapse
ZIP cannot be flashed in PC's Flashtool, but in Xrecovery my friend. TFT is for PC flashtool. If you wanna back where you begin, i suggest you follow this link's method. Worked as promised
http://forum.xda-developers.com/showthread.php?t=1196421
For ensuring your Future of changing new ROMS. Feel free to Send private message if got more doubts TQ
whitefang
fael097 said:
if I only had wi-fi. but I don't have any kind of internet right now heh
I did everything I was supposed to:
Factory Reset (Full wipe)
Wipe Cache Partition
Wipe Dalvik Cache
then I installed the rom, and flashed the FTF package
it says baseband 2.1.71 and kernel 2.6.29-00054 and etc. is that right?
the only thing I flashed was this FTF file. do I have to do anything other than that? idk how to flash my roms wifi modules, really new to this thing.
thanks guys
Click to expand...
Click to collapse
Try Full wipe again (ALERT THAT YOUR DATA WILL LOSS in your PHONE) if you can. THEN ,FOLLOW link i sent ya before and their instructions, videos. Best way is watch and learn. Have a nice day.
sincerely,
whitefang
PS: if you don't want to restart, you may have to find links that contains your downloaded WF ROM either is for unlocked/locked. Normally, wolfbreak will put its module links at his/her first post.
Feel free to PM if you want. Try my best
Hi everyone
a few days ago i have unlocked the bootloader on my xperia p following the official sony instructions.
After that i downloaded and flashed the sliding xp v5 kernel
Everything worked perfect and i wanted to install a custom rom, and i thought that the vision rom would be perfect.
I installed the vision rom v2 in cwm recovery and everything seemed perfect, i like the rom and everything is good but i have a few problems :-/
First i had the problem that sometimes when the screen locks and turns off,when i press the unlock button the screen wont turn on,i can hear that the phone works when i try to take a ss i hear the soind,but the screen wont turn on until i hard restart the phone :-/
The second problem is that the phone just restarts itself randomly sometimes :-/
And the last thin is that when i go in the dialer to call someone it happebs alot of times that the phone lags a lot there and it happens often that when someobe is calling me or when i call someone that it lags and the phone freezes :-/
Can someone tell me why is this happening,because of the kernel or the rom?
and what should i do to fix it,if possible i would like to keep all the settings which i made because i allready personalized it much....
Thanks to everyone in advance
arnes_king said:
Hi everyone
a few days ago i have unlocked the bootloader on my xperia p following the official sony instructions.
After that i downloaded and flashed the sliding xp v5 kernel
Everything worked perfect and i wanted to install a custom rom, and i thought that the vision rom would be perfect.
I installed the vision rom v2 in cwm recovery and everything seemed perfect, i like the rom and everything is good but i have a few problems :-/
First i had the problem that sometimes when the screen locks and turns off,when i press the unlock button the screen wont turn on,i can hear that the phone works when i try to take a ss i hear the soind,but the screen wont turn on until i hard restart the phone :-/
The second problem is that the phone just restarts itself randomly sometimes :-/
And the last thin is that when i go in the dialer to call someone it happebs alot of times that the phone lags a lot there and it happens often that when someobe is calling me or when i call someone that it lags and the phone freezes :-/
Can someone tell me why is this happening,because of the kernel or the rom?
and what should i do to fix it,if possible i would like to keep all the settings which i made because i allready personalized it much....
Thanks to everyone in advance
Click to expand...
Click to collapse
First that came in my mind is that this kernel and the rom are not for eachother - so try to flash munjeni's kernel and the rom again and try it.
Before that flash stock rom via flash tool to make clean install.
mirost1 said:
First that came in my mind is that this kernel and the rom are not for eachother - so try to flash munjeni's kernel and the rom again and try it.
Before that flash stock rom via flash tool to make clean install.
Click to expand...
Click to collapse
Thanks for your quick reply,right now the internet at my home isn't working so i will have to wait before i try it.
I have never used flashtool before so i want to ask you if anything from my phone will be deleted like apps,contacts or something else?
I have also made a backup using cwm before i installed this rom,would it be ok if i just restore the backup,then flash the new kerbel and after that the vision rom again?
arnes_king said:
Thanks for your quick reply,right now the internet at my home isn't working so i will have to wait before i try it.
I have never used flashtool before so i want to ask you if anything from my phone will be deleted like apps,contacts or something else?
I have also made a backup using cwm before i installed this rom,would it be ok if i just restore the backup,then flash the new kerbel and after that the vision rom again?
Click to expand...
Click to collapse
First of all the flash stock rom you need to put the ftf file in Flashtool/firmwares
Then connect the device in flashmode and flash rom (device switched off and to enter flashmode just do vol- and put usb in).
When flashing official stock rom as much as i know you will lose data, and its better to have clean install.
If you flash munjeni's kernel and the rom you want, and if you restore the back up that will flash the old boot.image too, i mean the old kernel and that is not wanted.
mirost1 said:
First of all the flash stock rom you need to put the ftf file in Flashtool/firmwares
Then connect the device in flashmode and flash rom (device switched off and to enter flashmode just do vol- and put usb in).
When flashing official stock rom as much as i know you will lose data, and its better to have clean install.
If you flash munjeni's kernel and the rom you want, and if you restore the back up that will flash the old boot.image too, i mean the old kernel and that is not wanted.
Click to expand...
Click to collapse
Ok then,thank you again for your help,as soon as my connection is back i will do that and post the results here
As for the kernel, flash tool and stock rom, i can find that all here on xda?
arnes_king said:
Ok then,thank you again for your help,as soon as my connection is back i will do that and post the results here
As for the kernel, flash tool and stock rom, i can find that all here on xda?
Click to expand...
Click to collapse
Yeah buddy, its all in Sola section.
Hello, sorry for my bad english. I have a problem, my Xperia Ray is stuck on boot logo after flash this ROM http://forum.xda-developers.com/showthread.php?t=1788672 ... I've been tried to flash official rom with flash tool with no sucess, i've tried to use PC Companion and SEUS but it says that my device is already updated and not have new updates. When i flash my device i realize that it still shows things about the version that i uninstall, it's weird because i flashed and wiped everything. The capacitive buttons and display doesn't work too. Please help me, i tried everything but nothing work. I hope you can help me to fix it.:crying: I leave to you some pictures of the problems:crying:
My solution:
http://forum.xda-developers.com/showpost.php?p=40004040&postcount=10
For $2 I have 4 recoveries.
For me it was the only way.
ErickST18 said:
Hello, sorry for my bad english. I have a problem, my Xperia Ray is stuck on boot logo after flash this ROM http://forum.xda-developers.com/showthread.php?t=1788672 ... I've been tried to flash official rom with flash tool with no sucess, i've tried to use PC Companion and SEUS but it says that my device is already updated and not have new updates. When i flash my device i realize that it still shows things about the version that i uninstall, it's weird because i flashed and wiped everything. The capacitive buttons and display doesn't work too. Please help me, i tried everything but nothing work. I hope you can help me to fix it.:crying: I leave to you some pictures of the problems:crying:
Click to expand...
Click to collapse
is ur bootloader unlocked?
have u flashed a custom kernel?
if yes,u can still boot into recovery and wipe data,dalvik cache nd battery stats
and did u install the patch?
coolancool said:
is ur bootloader unlocked?
have u flashed a custom kernel?
if yes,u can still boot into recovery and wipe data,dalvik cache nd battery stats
and did u install the patch?
Click to expand...
Click to collapse
Yes it's unlocked. Yes i flashed Radeon 4.0 Kernel... I tried wiping data, dalvik and battery stats but it still doesn't work.
Yep i did it too. I don't know what to do:crying:
panayi said:
My solution:
http://forum.xda-developers.com/showpost.php?p=40004040&postcount=10
For $2 I have 4 recoveries.
For me it was the only way.
Click to expand...
Click to collapse
Hmm got it, thank you bro i didn't think in this option. But, what i should do? Where i get these option?:crying: ... Didn't any other process works for your device?
ErickST18 said:
Yes it's unlocked. Yes i flashed Radeon 4.0 Kernel... I tried wiping data, dalvik and battery stats but it still doesn't work.
Yep i did it too. I don't know what to do:crying:
Click to expand...
Click to collapse
wipe all the data and try fashing the rom again is all that i can say...or the last option wud be to go to the Sony center and pay THEM instead of others and repair ur phone
---------- Post added at 08:50 AM ---------- Previous post was at 08:43 AM ----------
OR u cud try flashing back stock kernel,relocking the bootloader and then flash .587 firmware in ur device....try it!
Guys i got another problem... When i try to use Wotan to flash my device, it close... I mean, when i connect my ray in flash mode, the wotanclient close :S I tried on XP and Seven and i have the same problem. Can u help me?
ErickST18 said:
Hello, sorry for my bad english. I have a problem, my Xperia Ray is stuck on boot logo after flash this ROM http://forum.xda-developers.com/showthread.php?t=1788672 ... I've been tried to flash official rom with flash tool with no sucess, i've tried to use PC Companion and SEUS but it says that my device is already updated and not have new updates. When i flash my device i realize that it still shows things about the version that i uninstall, it's weird because i flashed and wiped everything. The capacitive buttons and display doesn't work too. Please help me, i tried everything but nothing work. I hope you can help me to fix it.:crying: I leave to you some pictures of the problems:crying:
Click to expand...
Click to collapse
how did u unlock your bootloader ?
and
how did u root your phone ? (i mean which process)
the ways in which rooting phone also affects the phone
newkid39 said:
how did u unlock your bootloader ?
and
how did u root your phone ? (i mean which process)
the ways in which rooting phone also affects the phone
Click to expand...
Click to collapse
The phone has already unlocked when i bought it... I can't remember exactly name of applications i used, I remember that i first intall Gingerbread then i root GB with Doomlord or something like that, and then install ICS but unchecking "wipe data" on flash tool, sorry that i dont give the name of the applications but im not in my pc. I hope you know what i'm talking about. Sorry for my bad english :S
Sony Ericsson Xperia st18i hang on logo solution
I try all those but not succeed after that i think is it Hardware?? when check there is problem with Charging Socket so please all of u check this and post reply, i'm success:good::good:
Not Boot
Hi
I have the Same problem. I can't flash my ST18i. Always fail. Not Boot-up. Only Sony log. How did you solve this problem?
Hello!
Like you see I don't have permissions to write on developer forum so I am asking here for my problem.
I have installed rom from here: http://forum.xda-developers.com/showthread.php?t=2265805
Everything is perfect on my Neo V, except one thing:
When I plug in charger or USB-PC cable, sound of connecting is audible but no state of charging is visible. When I enter into BATTERY menu in Settings, I can see increasing percents of battery level, but status of battery is "discharging". No icon of charging, no information on lock screen - nothing. It is frustrating My phone is rooted, CWM 6, kernel from package above. Can I do something to solve this problem?
Thank you for help everyone!
Michał
johny_noc said:
Hello!
Like you see I don't have permissions to write on developer forum so I am asking here for my problem.
I have installed rom from here: http://forum.xda-developers.com/showthread.php?t=2265805
Everything is perfect on my Neo V, except one thing:
When I plug in charger or USB-PC cable, sound of connecting is audible but no state of charging is visible. When I enter into BATTERY menu in Settings, I can see increasing percents of battery level, but status of battery is "discharging". No icon of charging, no information on lock screen - nothing. It is frustrating My phone is rooted, CWM 6, kernel from package above. Can I do something to solve this problem?
Thank you for help everyone!
Michał
Click to expand...
Click to collapse
PS. I see forest of hands to help me
I do not use this rom, but I try to help you with some this advice message.
You should try to reflash the stock firmware (the whole firmware, including kernel) and verify if the charging icon appear, then if you like the custom rom, try to flash it again, but be careful with each installation steps.
Try also to clear the battery status from CWM before flashing custom rom.
ciubexx said:
I do not use this rom, but I try to help you with some this advice message.
You should try to reflash the stock firmware (the whole firmware, including kernel) and verify if the charging icon appear, then if you like the custom rom, try to flash it again, but be careful with each installation steps.
Try also to clear the battery status from CWM before flashing custom rom.
Click to expand...
Click to collapse
Hello!
Thank you for answering my question!
Before installing this ROM everything works fine. Now battery shows how many energy left in percent, but when connecting phone to charger it doesn't show "charging" state. I will try to reset battery status before installing this ROM but I do not know if there is such option in CWM 6.
The second problem I saw yesterday is Gallery app crash, when trying to view picture from Camera app. It shows message "unfortunately, app Gallery was stopped". I was trying to clear cache, data, Dalvik cache - no results.
I will try to do what you've said and report back if it helps.
Best regards,
Michał
Hello again!
I've done what you asking for unfortunately with no success... All work fine without charging status and Gallery app (camera app, gallery app, recorder app). Any other ideas?
Thank you,
Michał
The charging issue is present on stock room too?
Or only on this customized rom?
I'll suggest to use for a couples of days stock room to see if the phone is stable: charging ok and the applications do not crash.
Then, if all is ok with the stock room installed, try another customized room or this custom room, but with another custom kernel.
I have my phone (Neo = MT15i) from november 2012, and on the first 4 ... 5 months I used at least one customized room, but in the final I given up to all customized room, and I use a stock room with only few application from a customized room. (InfiniteView, System UI and Calculator).
On stock ROM everything is OK. Do you really think it could be kernel problem? If yes then I wait for update of this kernel.
I also removed batterystats.bin using special app with no effects with charging state. Is there any possibility to change built Gallery app which includes Camera app and sound recorder app?
Besides of described problems I don't see anything else. I though the battery problem can be solved changing something in scripts...
What is strange, that when I connect a cable I hear special sound which signalize charger is plugged in.
Could you propose me a stable kernel compatible with android 4.2.2 (CyanogenMod 10.1)?
Thank you VERY MUCH for response and help!
Michał
Anyone??
Can anyone help me, please?
Stock firmware is slow (full of SONY app which are useless), but this (4.2.2) is much faster, but has bugs...
Sorry for this delayed message, as I mentioned above I did not use / used this firmware.
I suggest you to try different ROM based on ICS or JB, look at this post list: [REF][ALL Roms,Kernels ,firmwares for NEO/V/L ][14.07.2013][ACTIVELY UPDATED]
ciubexx said:
Sorry for this delayed message, as I mentioned above I did not use / used this firmware.
I suggest you to try different ROM based on ICS or JB, look at this post list: [REF][ALL Roms,Kernels ,firmwares for NEO/V/L ][14.07.2013][ACTIVELY UPDATED]
Click to expand...
Click to collapse
Hello!
I used another 4.2.2 ROM and the same issue appears... I repeat: on Stock ROM everything is OK...
Best regards,
Michał
johny_noc said:
Hello!
I used another 4.2.2 ROM and the same issue appears... I repeat: on Stock ROM everything is OK...
Best regards,
Michał
Click to expand...
Click to collapse
That's strange. I've using CM10 (JB 4.1.2) and CM10.1 (JB 4.2.2) since long time and never had this issue. Try re-flashing the kernel or try another cable
Regards
I've done reflashing... Trying to use other kernel, trying to do "fresh flash" (install stock ROM from .tft file then all procedure with rooting and CWM install). No results. Now I have kernel nAa+ 3.4.51 (maybe it is bugged)...
now I am on this ROM: http://forum.xda-developers.com/showthread.php?t=2358730
Michał
johny_noc said:
I've done reflashing... Trying to use other kernel, trying to do "fresh flash" (install stock ROM from .tft file then all procedure with rooting and CWM install). No results. Now I have kernel nAa+ 3.4.51 (maybe it is bugged)...
now I am on this ROM: http://forum.xda-developers.com/showthread.php?t=2358730
Michał
Click to expand...
Click to collapse
Hi,
nAa 3.4.51 works fine, I've been using it with DarkRom since it was released and never had your problem. You can try to flash latest nAa kernel 3.4.53 from DD thread (he released it on Saturday). It works fine and includes the latest changes
@milanjm - Thank you for your reply!
I have some questions:
1. Do I need to wipe something or reflashing ROM after this kernel installation?
2. What are "modules" in this thread? Do I need to install them too?
johny_noc said:
Do I need to wipe something or reflashing ROM after this kernel installation?
Click to expand...
Click to collapse
yes only format system,
on jb (cm10) do wipe battery stats in CWM >advanced>wipe battery stats
tiestobunio said:
yes only format system,
on jb (cm10) do wipe battery stats in CWM >advanced>wipe battery stats
Click to expand...
Click to collapse
Could you please answer all questions? Thank you.
johny_noc said:
@milanjm - Thank you for your reply!
I have some questions:
1. Do I need to wipe something or reflashing ROM after this kernel installation?
2. What are "modules" in this thread? Do I need to install them too?
Click to expand...
Click to collapse
1.. Flash another kernel like alfs 09c then in CWM do format system and full wipe then instal this rom .
2.Modules are the same as all roms , on cm9,cm10 is another but you have cm6/7 .
johny_noc said:
@milanjm - Thank you for your reply!
I have some questions:
1. Do I need to wipe something or reflashing ROM after this kernel installation?
2. What are "modules" in this thread? Do I need to install them too?
Click to expand...
Click to collapse
Here you have a detailed process:
1. Flash the kernel (fastboot)
2. Enter in recovery and format /system (only that) in mount option
3. Flash ROM
4. Flash modules (they are for WiFi)
5. Wipe dalvik (in advanced option)
6. Reboot
Let's hope this will solve your problem
@milanjm - Thank you for detailed instructions!
I will try to flash this new kernel after work (now I am at work ) and will inform you if something changes.
@tiestobunio - Thank you for pointing a good GB ROM.
I will flash it if every solution fails. I won't go back to 2.3.x GB now from known reasons.
johny_noc said:
@milanjm - Thank you for detailed instructions!
I will try to flash this new kernel after work (now I am at work ) and will inform you if something changes.
@tiestobunio - Thank you for pointing a good GB ROM.
I will flash it if every solution fails. I won't go back to 2.3.x GB now from known reasons.
Click to expand...
Click to collapse
Good luck
hi last week i updated my friend's xperia ray gb to ics everything works smooth.few days before he tried to send a song through bt.but phone restarts and bootloop happens.then i flashed ics again.then yesterday he tried to send a picture through bluetooth again the same problem happens.is that ics issue?is there any fix for it?i am waiting for reply.
Fixx
jamshadinho said:
hi last week i updated my friend's xperia ray gb to ics everything works smooth.few days before he tried to send a song through bt.but phone restarts and bootloop happens.then i flashed ics again.then yesterday he tried to send a picture through bluetooth again the same problem happens.is that ics issue?is there any fix for it?i am waiting for reply.
Click to expand...
Click to collapse
Dude, wrong place to post this question. This is not the appropriate thread to post queries.
Solution:
There is a app named "Bluetooth Fix Repair" on playstore.Download & install the app from playstore
Here is the link of GooglePlay store Download
Run the app. Tap on screen to FiX Bluetooth. thats simple. now bootloop problem is solved. restart your device. turn on Bluetooth to check. TA DA....
Source: http://forum.xda-developers.com/showthread.php?t=2319679
Press thanks if this post fixes your issue. Press thanks for original poster also.
Same problem happened to me also. Performed a full wipe and restored a nandroid backup. And about the app, the reviews in play store are not very promising.
jamshadinho, if you don't have any important data on the device, then perform a full wipe and flash the stock ICS with flashtool.
And BTW if a phone bootloops, how the h**l can we install an app from play store??????? chiyaanchinnu, please think about that before commenting on someone's problem.
tintin100 said:
Same problem happened to me also. Performed a full wipe and restored a nandroid backup. And about the app, the reviews in play store are not very promising.
jamshadinho, if you don't have any important data on the device, then perform a full wipe and flash the stock ICS with flashtool.
And BTW if a phone bootloops, how the h**l can we install an app from play store??????? chiyaanchinnu, please think about that before commenting on someone's problem.
Click to expand...
Click to collapse
Sure sir.