Hello!
Like you see I don't have permissions to write on developer forum so I am asking here for my problem.
I have installed rom from here: http://forum.xda-developers.com/showthread.php?t=2265805
Everything is perfect on my Neo V, except one thing:
When I plug in charger or USB-PC cable, sound of connecting is audible but no state of charging is visible. When I enter into BATTERY menu in Settings, I can see increasing percents of battery level, but status of battery is "discharging". No icon of charging, no information on lock screen - nothing. It is frustrating My phone is rooted, CWM 6, kernel from package above. Can I do something to solve this problem?
Thank you for help everyone!
Michał
johny_noc said:
Hello!
Like you see I don't have permissions to write on developer forum so I am asking here for my problem.
I have installed rom from here: http://forum.xda-developers.com/showthread.php?t=2265805
Everything is perfect on my Neo V, except one thing:
When I plug in charger or USB-PC cable, sound of connecting is audible but no state of charging is visible. When I enter into BATTERY menu in Settings, I can see increasing percents of battery level, but status of battery is "discharging". No icon of charging, no information on lock screen - nothing. It is frustrating My phone is rooted, CWM 6, kernel from package above. Can I do something to solve this problem?
Thank you for help everyone!
Michał
Click to expand...
Click to collapse
PS. I see forest of hands to help me
I do not use this rom, but I try to help you with some this advice message.
You should try to reflash the stock firmware (the whole firmware, including kernel) and verify if the charging icon appear, then if you like the custom rom, try to flash it again, but be careful with each installation steps.
Try also to clear the battery status from CWM before flashing custom rom.
ciubexx said:
I do not use this rom, but I try to help you with some this advice message.
You should try to reflash the stock firmware (the whole firmware, including kernel) and verify if the charging icon appear, then if you like the custom rom, try to flash it again, but be careful with each installation steps.
Try also to clear the battery status from CWM before flashing custom rom.
Click to expand...
Click to collapse
Hello!
Thank you for answering my question!
Before installing this ROM everything works fine. Now battery shows how many energy left in percent, but when connecting phone to charger it doesn't show "charging" state. I will try to reset battery status before installing this ROM but I do not know if there is such option in CWM 6.
The second problem I saw yesterday is Gallery app crash, when trying to view picture from Camera app. It shows message "unfortunately, app Gallery was stopped". I was trying to clear cache, data, Dalvik cache - no results.
I will try to do what you've said and report back if it helps.
Best regards,
Michał
Hello again!
I've done what you asking for unfortunately with no success... All work fine without charging status and Gallery app (camera app, gallery app, recorder app). Any other ideas?
Thank you,
Michał
The charging issue is present on stock room too?
Or only on this customized rom?
I'll suggest to use for a couples of days stock room to see if the phone is stable: charging ok and the applications do not crash.
Then, if all is ok with the stock room installed, try another customized room or this custom room, but with another custom kernel.
I have my phone (Neo = MT15i) from november 2012, and on the first 4 ... 5 months I used at least one customized room, but in the final I given up to all customized room, and I use a stock room with only few application from a customized room. (InfiniteView, System UI and Calculator).
On stock ROM everything is OK. Do you really think it could be kernel problem? If yes then I wait for update of this kernel.
I also removed batterystats.bin using special app with no effects with charging state. Is there any possibility to change built Gallery app which includes Camera app and sound recorder app?
Besides of described problems I don't see anything else. I though the battery problem can be solved changing something in scripts...
What is strange, that when I connect a cable I hear special sound which signalize charger is plugged in.
Could you propose me a stable kernel compatible with android 4.2.2 (CyanogenMod 10.1)?
Thank you VERY MUCH for response and help!
Michał
Anyone??
Can anyone help me, please?
Stock firmware is slow (full of SONY app which are useless), but this (4.2.2) is much faster, but has bugs...
Sorry for this delayed message, as I mentioned above I did not use / used this firmware.
I suggest you to try different ROM based on ICS or JB, look at this post list: [REF][ALL Roms,Kernels ,firmwares for NEO/V/L ][14.07.2013][ACTIVELY UPDATED]
ciubexx said:
Sorry for this delayed message, as I mentioned above I did not use / used this firmware.
I suggest you to try different ROM based on ICS or JB, look at this post list: [REF][ALL Roms,Kernels ,firmwares for NEO/V/L ][14.07.2013][ACTIVELY UPDATED]
Click to expand...
Click to collapse
Hello!
I used another 4.2.2 ROM and the same issue appears... I repeat: on Stock ROM everything is OK...
Best regards,
Michał
johny_noc said:
Hello!
I used another 4.2.2 ROM and the same issue appears... I repeat: on Stock ROM everything is OK...
Best regards,
Michał
Click to expand...
Click to collapse
That's strange. I've using CM10 (JB 4.1.2) and CM10.1 (JB 4.2.2) since long time and never had this issue. Try re-flashing the kernel or try another cable
Regards
I've done reflashing... Trying to use other kernel, trying to do "fresh flash" (install stock ROM from .tft file then all procedure with rooting and CWM install). No results. Now I have kernel nAa+ 3.4.51 (maybe it is bugged)...
now I am on this ROM: http://forum.xda-developers.com/showthread.php?t=2358730
Michał
johny_noc said:
I've done reflashing... Trying to use other kernel, trying to do "fresh flash" (install stock ROM from .tft file then all procedure with rooting and CWM install). No results. Now I have kernel nAa+ 3.4.51 (maybe it is bugged)...
now I am on this ROM: http://forum.xda-developers.com/showthread.php?t=2358730
Michał
Click to expand...
Click to collapse
Hi,
nAa 3.4.51 works fine, I've been using it with DarkRom since it was released and never had your problem. You can try to flash latest nAa kernel 3.4.53 from DD thread (he released it on Saturday). It works fine and includes the latest changes
@milanjm - Thank you for your reply!
I have some questions:
1. Do I need to wipe something or reflashing ROM after this kernel installation?
2. What are "modules" in this thread? Do I need to install them too?
johny_noc said:
Do I need to wipe something or reflashing ROM after this kernel installation?
Click to expand...
Click to collapse
yes only format system,
on jb (cm10) do wipe battery stats in CWM >advanced>wipe battery stats
tiestobunio said:
yes only format system,
on jb (cm10) do wipe battery stats in CWM >advanced>wipe battery stats
Click to expand...
Click to collapse
Could you please answer all questions? Thank you.
johny_noc said:
@milanjm - Thank you for your reply!
I have some questions:
1. Do I need to wipe something or reflashing ROM after this kernel installation?
2. What are "modules" in this thread? Do I need to install them too?
Click to expand...
Click to collapse
1.. Flash another kernel like alfs 09c then in CWM do format system and full wipe then instal this rom .
2.Modules are the same as all roms , on cm9,cm10 is another but you have cm6/7 .
johny_noc said:
@milanjm - Thank you for your reply!
I have some questions:
1. Do I need to wipe something or reflashing ROM after this kernel installation?
2. What are "modules" in this thread? Do I need to install them too?
Click to expand...
Click to collapse
Here you have a detailed process:
1. Flash the kernel (fastboot)
2. Enter in recovery and format /system (only that) in mount option
3. Flash ROM
4. Flash modules (they are for WiFi)
5. Wipe dalvik (in advanced option)
6. Reboot
Let's hope this will solve your problem
@milanjm - Thank you for detailed instructions!
I will try to flash this new kernel after work (now I am at work ) and will inform you if something changes.
@tiestobunio - Thank you for pointing a good GB ROM.
I will flash it if every solution fails. I won't go back to 2.3.x GB now from known reasons.
johny_noc said:
@milanjm - Thank you for detailed instructions!
I will try to flash this new kernel after work (now I am at work ) and will inform you if something changes.
@tiestobunio - Thank you for pointing a good GB ROM.
I will flash it if every solution fails. I won't go back to 2.3.x GB now from known reasons.
Click to expand...
Click to collapse
Good luck
Related
Hi~
im using GT-I9003 ..... and i think problem not just in my mobile
maybe android system!
when install room 2.3 camera go wrong just take one photo and shown black
screen!!~ i try maybe 10 rooms (2.1 & 2.3) the same problem
and not just the camera all multmedia>>>>(youtube,video player,camera)
plese what is the problem
thank you~
Back-up all your stuff and do full wipe and factory re-set and re-flash again.follow the instructions to the word and dont forget that when you do a flash it has to be compatable with the make and model of your phone.also after a flash you must do a wipe and factory re-set.i also do a battery stats wipe to start of fresh just incase.
cooza said:
Back-up all your stuff and do full wipe and factory re-set and re-flash again.follow the instructions to the word and dont forget that when you do a flash it has to be compatable with the make and model of your phone.also after a flash you must do a wipe and factory re-set.i also do a battery stats wipe to start of fresh just incase.
Click to expand...
Click to collapse
no any change thank you maybe i,m not do all steps....(do full wipe)did you mean
format? or what,,,,also do a battery stats wipe? i don,t understand plese more
explin~
another sloution plese
fso0ol said:
no any change thank you maybe i,m not do all steps....(do full wipe)did you mean
format? or what,,,,also do a battery stats wipe? i don,t understand plese more
explin~
another sloution plese
Click to expand...
Click to collapse
He means to restore to factory default as in go back to stock (how it came out of the box).
vinvam said:
He means to restore to factory default as in go back to stock (how it came out of the box).
Click to expand...
Click to collapse
I do that & nothing happen! i think the frimware have proplems
now i have 2.2 and i find out new problems like (force close) when delete app!
and some times stop and shown message force close for all app and made me
should restart phone!
i need clean frim ware all frims i install have apps like opera mini and some
markets 2.2
and setting frim ware apps in 2.3.4
plese new solution
what rom and kernel are you using? are they compatible with each other? try flashing another kernel
when i flashed an incompatible kernel with my rom, my camera got screwed up, accelerometer didnt work, etc
sweetnsour said:
what rom and kernel are you using? are they compatible with each other? try flashing another kernel
when i flashed an incompatible kernel with my rom, my camera got screwed up, accelerometer didnt work, etc
Click to expand...
Click to collapse
Room:FROYO.JPKD1
Kernel:2.6.32.9 [email protected] #1....and i think it very compatible
because i download it in 1 file from samfrimware
plese help me~
Plese any one have arabic full room not just one file or 3
plese any full room for gt-i9003
I Have the same question on MOTO xt502
I intall all update 2.1 to 2.3 always wipe
I TRY to change the dirver for camera
but no use
nothing happened
now I use
Room:cm_z71_full-161.zip
Kernel:2.6.35.19 -cyanogenmod [email protected] #1
the camera also connot open
hi.
i flashed stock rom S5830XWKS2 through Odin. the phone started rebooting randomly.
then i flashed custom rom TheMyth KS3 but the problem kept getting worse. when i'm using the phone, it reboots every few seconds.
i flashed stock rom S5830XWKS3. but the Baseband version in the phone didnt change (S5830XWKS2). and the problem is still persistent.
the phones does not do full reboot. it freezes, the screen goes black, then goes strait to the boot animation.
also, if it reboots while transferring files through mass usb storage, the transfer doesnt stop, to continues normally.
1. any idea why is this happening?
2. why didnt the baseband version change when i flashed KS3?
3. do you recommend another stock rom to flash.
p.s: KS3 seems fast. i got 1040 score in quadrant on stock rom.
i would appreciate any help. thanks
dali47 said:
hi.
i flashed stock rom S5830XWKS2 through Odin. the phone started rebooting randomly.
then i flashed custom rom TheMyth KS3 but the problem kept getting worse. when i'm using the phone, it reboots every few seconds.
i flashed stock rom S5830XWKS3. but the Baseband version in the phone didnt change (S5830XWKS2). and the problem is still persistent.
the phones does not do full reboot. it freezes, the screen goes black, then goes strait to the boot animation.
also, if it reboots while transferring files through mass usb storage, the transfer doesnt stop, to continues normally.
1. any idea why is this happening?
2. why didnt the baseband version change when i flashed KS3?
3. do you recommend another stock rom to flash.
p.s: KS3 seems fast. i got 1040 score in quadrant on stock rom.
i would appreciate any help. thanks
Click to expand...
Click to collapse
Hey !
The Baseband Version is KS2 while Build is KS9 (in my stock rom)
If you end in Bootloops, press Power + Home till you get into recovery, then Clear data/Factory Reset and clear Cache, then reboot.
Come back and tell me if it worked for you.
Greetings
thank you for your reply.
it's actually not a bootloop. the phone boots normally and works fine for some times (few seconds/minutes) then it freezes for few seconds, then the screen turns black for a second, then shows the boot animation (doesn't show the boot screen with the samsung logo). it works fine for some time, then again.
it seems that the problem is related to the wifi. it only happens when wifi is on.
On Samfirmware.com they say that you should make a Factory Reset after flashing, maybe that works for you ? I flashed the KS9 Stock today and had some problems till I did this in Recovery. Else I would have no Idea, maybe reflash or get another Version ?
You could also try to install any custom Rom, like Jusada´s ICS for example, just to test if there are problems with CM also ..
Umm, maybe a question to those who only touch the Earth to answer our Newb questions...is it possible that the Ace restarts when it get´s attacked from the outside ? I faced that after flashing a Rom that I modified and didn´t have the right Permissions the Phone restarted/bootlooped when I tried to install any App (\data\app wasn´t set correct)
Greetings
thank you. i guess i'll try to flash again. or maybe try a different stock.
dali47 said:
thank you. i guess i'll try to flash again. or maybe try a different stock.
Click to expand...
Click to collapse
If you had the Android SDK Tools , you could show me a logcat of what's going on
EmoBoiix3 said:
If you had the Android SDK Tools , you could show me a logcat of what's going on
Click to expand...
Click to collapse
hi. i do have the sdk. here are a few log files:
http://pastebin.com/Amt00nuY
http://pastebin.com/SHeasfvq
http://pastebin.com/sirV2FEe
this is the first time i use logcat, so if there is a command or option i should use to make the log file more useful, just let me know.
thank you for your time
dali47 said:
hi. i do have the sdk. here are a few log files:
http://pastebin.com/Amt00nuY
http://pastebin.com/SHeasfvq
http://pastebin.com/sirV2FEe
this is the first time i use logcat, so if there is a command or option i should use to make the log file more useful, just let me know.
thank you for your time
Click to expand...
Click to collapse
The original TheMyth creator said that KS3 was badly unstable .
Use KS2 instead
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
The original TheMyth creator said that KS3 was badly unstable .
Use KS2 instead
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
He should try to upgrade to KS3 v1.1. That's final update for TheMyth KS3 with:
- Meizu Myth theme
- BLN Control activated
- changed some small things
>> I think this update can help him to solve frequent random reboot in TheMyth KS3
http://mobile.livemodding.com/forum/398-samsung-galaxy-ace/
Click to expand...
Click to collapse
my first attempt was with KS2. that's when the problem started, even before i install TheMyth. The 1.1 update didnt help either.
I guess my phone is not getting along with the KS2 baseband. i will just switch to GingerReal, hopefully it will be stable.
thank you everyone
Hi,
First of all, im a bit of a noob.
Second, i have rooted my phone, a SG2 GT-i9100 XWLPD.
And no matter what i do, it just wont succeed to install roms, every ones i tried, get stuck on boot screen. i have remembered to wipe.
Then i go to CWM, and install again, cause i read somewhere you maybe should do it twice. nothing.
Then i reverted to stock, that works.
Tried again, nothing.
I have tried
Thebyani_v4.3_ICS
Spike.pure.ics-v7.4
Villainrom 2.4.2
All to XWLPD.
What to do ?
Not sure what happens when you try those roms, but you can try the ICS Reseruction ROM which is the best ROM out there for SG2. Here is the link to the ROM page:
http://forum.xda-developers.com/showthread.php?t=1436854
You can install it using the following steps:
-Reboot into recovery (CWM)
-Wipe Data / Factory Reset
-Install the Main ROM
-In recovery go to Advanced
-Wipe Dalvik Cache
-Fix Permissions
-Wipe Cache Partition
-Reboot
-If at the first boot you can't do the configuration of the google account, skip this step and continue
-When you boot into the system, it's probably that you don't have data enabled (3g, H+) just reboot
-When you boot again into the system the data will be enable and you can do the configuration of Google Account (if you don't do this before)
-This is the moment for install all the extras like themes, fix's, kernels, etc.
Enjoy!!!
Thanks, ill try that..
I really wants a battery saver rom, if you know any better ones.
Edit: Didn't work, starts up, goes to samsung logo, with the triangle, goes to ICS siyahkernel, then it reboots to recovery mode (CWMR Touch v5.5.0.4)
Any advise?
xxbs said:
Hi,
First of all, im a bit of a noob.
Second, i have rooted my phone, a SG2 GT-i9100 XWLPD.
And no matter what i do, it just wont succeed to install roms, every ones i tried, get stuck on boot screen. i have remembered to wipe.
Then i go to CWM, and install again, cause i read somewhere you maybe should do it twice. nothing.
Then i reverted to stock, that works.
Tried again, nothing.
I have tried
Thebyani_v4.3_ICS
Spike.pure.ics-v7.4
Villainrom 2.4.2
All to XWLPD.
What to do ?
Click to expand...
Click to collapse
Get used to work with Odin, that's all!
Just read, there are so many descriptions out there!
Second, if your phone was delivered with ics (lpd) do not attempt to flash a GB ROM (vr 2.4.2] since it will not work with an ics bootloader!
Some ROM's are not running as standalone, they are mostly offset roms based on cm9 examples are slim ics or Clean blank ROM, don't know whether the roms you named are like this.
So, all you need is Odin (or mobile Odin) and a ROM in .tar.md5 format.
I recommend litening rom 3.2 which is fully deodexed and close to stock.
Good luck!
Tapatalked from my Samsung GT9100
Or you can try NEAT. It's stock and has gr8 battery.
I don't think it's the roms... u might do something wrong... follow the steps:
1. Reboot into recovery
2. Factory reset
3. Wipe cache, dalvik, battery stats
4. Install the rom
5. Reboot system
I always do that and never had a problem.
Good luck!
Sent from my awesome SGS2
Karpfenhai said:
Get used to work with Odin, that's all!
Just read, there are so many descriptions out there!
Second, if your phone was delivered with ics (lpd) do not attempt to flash a GB ROM (vr 2.4.2] since it will not work with an ics bootloader!
Some ROM's are not running as standalone, they are mostly offset roms based on cm9 examples are slim ics or Clean blank ROM, don't know whether the roms you named are like this.
So, all you need is Odin (or mobile Odin) and a ROM in .tar.md5 format.
I recommend litening rom 3.2 which is fully deodexed and close to stock.
Good luck!
Tapatalked from my Samsung GT9100
Click to expand...
Click to collapse
IT WORKED! you are my hero now, thanks alot mate !
A good video about ICS Resurrection features
http://galaxys2root.com/galaxy-s2-roms/resurrection-ics-rom-v2-0-for-galaxy-s2-i9100-best-ics-rom/
xxbs said:
IT WORKED! you are my hero now, thanks alot mate !
Click to expand...
Click to collapse
You're welcome
If you really want to save battery, go for phenomenal kernel extreme and use ki3 /ki4 modem, check my sig for bloatware which can be frozen.
Ps: if phenomenal extreme will end up in bootloop, use medium version, best approach, dl them both before flashing extreme
Tapatalked from my Samsung GT9100
Can you give me a link, cause theres too many to choose
right now im in this thread, but dont know what to choose..
http://forum.xda-developers.com/showthread.php?t=1601520
xxbs said:
Can you give me a link, cause theres too many to choose
right now im in this thread, but dont know what to choose..
http://forum.xda-developers.com/showthread.php?t=1601520
Click to expand...
Click to collapse
Just DL 5.5 Medium zip and extreme.zip, go to cwm and flash extreme, if boot stucks, wipe cache and dalvik, if its still not working, go to cwm again and flash medium.
if you DL them to the phone directly, rename it after dl cuz on the phone the name will be phenomenal5.zip in all cases!
If you use odin, dl the .tar files
Not too hard or?
Okay, ill do that, i will use odin.
Thanks again
Edit: It worked with Odin, now im on that kernel, thanks mate, im looking forward to see the battery improvement
xxbs said:
Okay, ill do that, i will use odin.
Thanks again
Edit: It worked with Odin, now im on that kernel, thanks mate, im looking forward to see the battery improvement
Click to expand...
Click to collapse
Great, which one ? extreme ? If yes, lucky you!
For further Battery Improvements, use BBS and post a dump in the desired thread.
Please do not use any benchmarks, they will not give you the best results on this kernel, as long as the phone is smooth, everything is fine!
Yes, extreme one
What do you mean with "use BBS and post a dump in the desired thread." ?
xxbs said:
Yes, extreme one
What do you mean with "use BBS and post a dump in the desired thread." ?
Click to expand...
Click to collapse
Means if you are not happy with your battery life and you want to work out your drainers, use this app and post a dump there --> http://forum.xda-developers.com/showthread.php?t=1179809
regards!
OK, Thanks alot for your time
Hi everyone
a few days ago i have unlocked the bootloader on my xperia p following the official sony instructions.
After that i downloaded and flashed the sliding xp v5 kernel
Everything worked perfect and i wanted to install a custom rom, and i thought that the vision rom would be perfect.
I installed the vision rom v2 in cwm recovery and everything seemed perfect, i like the rom and everything is good but i have a few problems :-/
First i had the problem that sometimes when the screen locks and turns off,when i press the unlock button the screen wont turn on,i can hear that the phone works when i try to take a ss i hear the soind,but the screen wont turn on until i hard restart the phone :-/
The second problem is that the phone just restarts itself randomly sometimes :-/
And the last thin is that when i go in the dialer to call someone it happebs alot of times that the phone lags a lot there and it happens often that when someobe is calling me or when i call someone that it lags and the phone freezes :-/
Can someone tell me why is this happening,because of the kernel or the rom?
and what should i do to fix it,if possible i would like to keep all the settings which i made because i allready personalized it much....
Thanks to everyone in advance
arnes_king said:
Hi everyone
a few days ago i have unlocked the bootloader on my xperia p following the official sony instructions.
After that i downloaded and flashed the sliding xp v5 kernel
Everything worked perfect and i wanted to install a custom rom, and i thought that the vision rom would be perfect.
I installed the vision rom v2 in cwm recovery and everything seemed perfect, i like the rom and everything is good but i have a few problems :-/
First i had the problem that sometimes when the screen locks and turns off,when i press the unlock button the screen wont turn on,i can hear that the phone works when i try to take a ss i hear the soind,but the screen wont turn on until i hard restart the phone :-/
The second problem is that the phone just restarts itself randomly sometimes :-/
And the last thin is that when i go in the dialer to call someone it happebs alot of times that the phone lags a lot there and it happens often that when someobe is calling me or when i call someone that it lags and the phone freezes :-/
Can someone tell me why is this happening,because of the kernel or the rom?
and what should i do to fix it,if possible i would like to keep all the settings which i made because i allready personalized it much....
Thanks to everyone in advance
Click to expand...
Click to collapse
First that came in my mind is that this kernel and the rom are not for eachother - so try to flash munjeni's kernel and the rom again and try it.
Before that flash stock rom via flash tool to make clean install.
mirost1 said:
First that came in my mind is that this kernel and the rom are not for eachother - so try to flash munjeni's kernel and the rom again and try it.
Before that flash stock rom via flash tool to make clean install.
Click to expand...
Click to collapse
Thanks for your quick reply,right now the internet at my home isn't working so i will have to wait before i try it.
I have never used flashtool before so i want to ask you if anything from my phone will be deleted like apps,contacts or something else?
I have also made a backup using cwm before i installed this rom,would it be ok if i just restore the backup,then flash the new kerbel and after that the vision rom again?
arnes_king said:
Thanks for your quick reply,right now the internet at my home isn't working so i will have to wait before i try it.
I have never used flashtool before so i want to ask you if anything from my phone will be deleted like apps,contacts or something else?
I have also made a backup using cwm before i installed this rom,would it be ok if i just restore the backup,then flash the new kerbel and after that the vision rom again?
Click to expand...
Click to collapse
First of all the flash stock rom you need to put the ftf file in Flashtool/firmwares
Then connect the device in flashmode and flash rom (device switched off and to enter flashmode just do vol- and put usb in).
When flashing official stock rom as much as i know you will lose data, and its better to have clean install.
If you flash munjeni's kernel and the rom you want, and if you restore the back up that will flash the old boot.image too, i mean the old kernel and that is not wanted.
mirost1 said:
First of all the flash stock rom you need to put the ftf file in Flashtool/firmwares
Then connect the device in flashmode and flash rom (device switched off and to enter flashmode just do vol- and put usb in).
When flashing official stock rom as much as i know you will lose data, and its better to have clean install.
If you flash munjeni's kernel and the rom you want, and if you restore the back up that will flash the old boot.image too, i mean the old kernel and that is not wanted.
Click to expand...
Click to collapse
Ok then,thank you again for your help,as soon as my connection is back i will do that and post the results here
As for the kernel, flash tool and stock rom, i can find that all here on xda?
arnes_king said:
Ok then,thank you again for your help,as soon as my connection is back i will do that and post the results here
As for the kernel, flash tool and stock rom, i can find that all here on xda?
Click to expand...
Click to collapse
Yeah buddy, its all in Sola section.
Hello guys,
I kinda confused about flashing jbx kernel because every time I try to flash it into custom rom (fresh install or not), it made my phone go boot loop (screen never go pass SS menu) right after first reboot system. But if i'm excluding the jbx, there's no problem about booting at all.
this is my flashing prosedure when using jbx:
- wipe everything except sd card & internal
- install rom
- install gapps
- install jbx kernel
- reboot....and bamm! bootloop
Already search the rom thread that everyone said it's compatible with it, tried with/without tweak, or wipe cache/dalvik cache every single flashing and still get same problem. Is it just me? Please help me
btw this is my 1st thread in xda so please go easy on me
additional note--> I'm always getting "unable to mount /osh". Maybe there's a connection with this.
Thx
guitarholixx said:
Hello guys,
I kinda confused about flashing jbx kernel because every time I try to flash it into custom rom (fresh install or not), it made my phone go boot loop (screen never go pass SS menu) right after first reboot system. But if i'm excluding the jbx, there's no problem about booting at all.
this is my flashing prosedure when using jbx:
- wipe everything except sd card & internal
- install rom
- install gapps
- install jbx kernel
- reboot....and bamm! bootloop
Already search the rom thread that everyone said it's compatible with it, tried with/without tweak, or wipe cache/dalvik cache every single flashing and still get same problem. Is it just me? Please help me
btw this is my 1st thread in xda so please go easy on me
additional note--> I'm always getting "unable to mount /osh". Maybe there's a connection with this.
Thx
Click to expand...
Click to collapse
It could be a corrupted zip file. Try re-downloading it.
The mount error you mentioned was faced by some users when they updated to SS 3.6x (some, not all), but it didn't cause any flashing issues.So that is not probably related.
neo.ank said:
It could be a corrupted zip file. Try re-downloading it.
The mount error you mentioned was faced by some users when they updated to SS 3.6x (some, not all), but it didn't cause any flashing issues.So that is not probably related.
Click to expand...
Click to collapse
thank you for your reply neo. sorry i forgot to mention that i already try jbx even before kitkat version is out. previously i try slimbean with jbx for jb. try re-downloading, try the previous build, still get that problem. And now i'm using KK LiquidSmooth v3.0 nightly and try flashing with JBX_Kernel-3.0-Hybrid-4.4_2014-02-06.zip, yet still getting bootloop. so until now im using it without jbx
98 2628252
is there no one here experience this except me? no one have another answer for this? I'm really eager to overclocking and tweaking my xt912
(sorry for the title. use wrong textbox for img verification)
guitarholixx said:
is there no one here experience this except me? no one have another answer for this? I'm really eager to overclocking and tweaking my xt912
(sorry for the title. use wrong textbox for img verification)
Click to expand...
Click to collapse
hi man, if you are able to enter to safestrap, mount system and delete bootanimation (system>>media) Good Luck!
guitarholixx said:
is there no one here experience this except me? no one have another answer for this? I'm really eager to overclocking and tweaking my xt912
(sorry for the title. use wrong textbox for img verification)
Click to expand...
Click to collapse
Are you sure you're downloading the and flashing the correct JBX for your OS. It sounds like the wrong version.
JBX-Kernel 3.0.8 Versions:
0.8.x ==> Android 4.2.2
1.x == > Android 4.3
2.x == > Android 4.4
JBX-Kernel 3.0.31 Versions:
3.x == > Android 4.4
Click to expand...
Click to collapse
If you're using the correct version with OS, try an older KK JBX zip, he has many for 4.4 (http://d-h.st/users/dtrail/?fld_id=28796#files) and I know at least half work with Liquid Smooth and CM11, did on my XT912. Also Verify MD5 before you flash.
Another problem, based on that error, do you still have root for the device? Double check.
I'm sorry for the late reply. Been busy since my last post.
siracuervo said:
hi man, if you are able to enter to safestrap, mount system and delete bootanimation (system>>media) Good Luck!
Click to expand...
Click to collapse
nope. still not working.
hakarune said:
Are you sure you're downloading the and flashing the correct JBX for your OS. It sounds like the wrong version.
If you're using the correct version with OS, try an older KK JBX zip, he has many for 4.4 (http://d-h.st/users/dtrail/?fld_id=28796#files) and I know at least half work with Liquid Smooth and CM11, did on my XT912. Also Verify MD5 before you flash.
Another problem, based on that error, do you still have root for the device? Double check.
Click to expand...
Click to collapse
I think i download the correct one. I'm using JBX_Kernel-3.0-Hybrid-4.4_2014-02-06.zip for liquidsmooth KK, and yes the root access still there.
And the last i try flashing, I still getting the bootloop. then I flash it again to restore the build in kernel and still flashing the moto x camera and a few tweaks and my phone boot perfectly with moto x camera installed. don't know with the tweaks though. I think just the kernel that made my phone bootlooping.
guitarholixx said:
I think i download the correct one. I'm using JBX_Kernel-3.0-Hybrid-4.4_2014-02-06.zip for liquidsmooth KK, and yes the root access still there.
And the last i try flashing, I still getting the bootloop. then I flash it again to restore the build in kernel and still flashing the moto x camera and a few tweaks and my phone boot perfectly with moto x camera installed. don't know with the tweaks though. I think just the kernel that made my phone bootlooping.
Click to expand...
Click to collapse
Do you have a ROM running now? So, I had this problem with slimkat and the jbx. Just flash the ROM over now! Go on recovery and flash the rom
EDIT: I didn´t read the massage... Solved?
Enviado desde mi XT910
siracuervo said:
Do you have a ROM running now? So, I had this problem with slimkat and the jbx. Just flash the ROM over now! Go on recovery and flash the rom
EDIT: I didn´t read the massage... Solved?
Enviado desde mi XT910
Click to expand...
Click to collapse
sorry for the late reply. Really busy here
Do you mean when I'm getting the bootloop, i have to dirty flash it again with the ROM? okay i'll try as soon as possible.
for changing the kernel, not yet solved. but for installing camera moto x, trickster etc, it's work. I still can't overclocked it.
after I dirty flash it, looks like the kernel got replaced with the new one. It's successfully booted, but I cannot overclock it, the apps like xposed, moto x camera, etc is missing.
finally it work. i flash it without any tweak at all. my phone need to reboot twice before it successfully enter homescreen.