Hi,
First of all, im a bit of a noob.
Second, i have rooted my phone, a SG2 GT-i9100 XWLPD.
And no matter what i do, it just wont succeed to install roms, every ones i tried, get stuck on boot screen. i have remembered to wipe.
Then i go to CWM, and install again, cause i read somewhere you maybe should do it twice. nothing.
Then i reverted to stock, that works.
Tried again, nothing.
I have tried
Thebyani_v4.3_ICS
Spike.pure.ics-v7.4
Villainrom 2.4.2
All to XWLPD.
What to do ?
Not sure what happens when you try those roms, but you can try the ICS Reseruction ROM which is the best ROM out there for SG2. Here is the link to the ROM page:
http://forum.xda-developers.com/showthread.php?t=1436854
You can install it using the following steps:
-Reboot into recovery (CWM)
-Wipe Data / Factory Reset
-Install the Main ROM
-In recovery go to Advanced
-Wipe Dalvik Cache
-Fix Permissions
-Wipe Cache Partition
-Reboot
-If at the first boot you can't do the configuration of the google account, skip this step and continue
-When you boot into the system, it's probably that you don't have data enabled (3g, H+) just reboot
-When you boot again into the system the data will be enable and you can do the configuration of Google Account (if you don't do this before)
-This is the moment for install all the extras like themes, fix's, kernels, etc.
Enjoy!!!
Thanks, ill try that..
I really wants a battery saver rom, if you know any better ones.
Edit: Didn't work, starts up, goes to samsung logo, with the triangle, goes to ICS siyahkernel, then it reboots to recovery mode (CWMR Touch v5.5.0.4)
Any advise?
xxbs said:
Hi,
First of all, im a bit of a noob.
Second, i have rooted my phone, a SG2 GT-i9100 XWLPD.
And no matter what i do, it just wont succeed to install roms, every ones i tried, get stuck on boot screen. i have remembered to wipe.
Then i go to CWM, and install again, cause i read somewhere you maybe should do it twice. nothing.
Then i reverted to stock, that works.
Tried again, nothing.
I have tried
Thebyani_v4.3_ICS
Spike.pure.ics-v7.4
Villainrom 2.4.2
All to XWLPD.
What to do ?
Click to expand...
Click to collapse
Get used to work with Odin, that's all!
Just read, there are so many descriptions out there!
Second, if your phone was delivered with ics (lpd) do not attempt to flash a GB ROM (vr 2.4.2] since it will not work with an ics bootloader!
Some ROM's are not running as standalone, they are mostly offset roms based on cm9 examples are slim ics or Clean blank ROM, don't know whether the roms you named are like this.
So, all you need is Odin (or mobile Odin) and a ROM in .tar.md5 format.
I recommend litening rom 3.2 which is fully deodexed and close to stock.
Good luck!
Tapatalked from my Samsung GT9100
Or you can try NEAT. It's stock and has gr8 battery.
I don't think it's the roms... u might do something wrong... follow the steps:
1. Reboot into recovery
2. Factory reset
3. Wipe cache, dalvik, battery stats
4. Install the rom
5. Reboot system
I always do that and never had a problem.
Good luck!
Sent from my awesome SGS2
Karpfenhai said:
Get used to work with Odin, that's all!
Just read, there are so many descriptions out there!
Second, if your phone was delivered with ics (lpd) do not attempt to flash a GB ROM (vr 2.4.2] since it will not work with an ics bootloader!
Some ROM's are not running as standalone, they are mostly offset roms based on cm9 examples are slim ics or Clean blank ROM, don't know whether the roms you named are like this.
So, all you need is Odin (or mobile Odin) and a ROM in .tar.md5 format.
I recommend litening rom 3.2 which is fully deodexed and close to stock.
Good luck!
Tapatalked from my Samsung GT9100
Click to expand...
Click to collapse
IT WORKED! you are my hero now, thanks alot mate !
A good video about ICS Resurrection features
http://galaxys2root.com/galaxy-s2-roms/resurrection-ics-rom-v2-0-for-galaxy-s2-i9100-best-ics-rom/
xxbs said:
IT WORKED! you are my hero now, thanks alot mate !
Click to expand...
Click to collapse
You're welcome
If you really want to save battery, go for phenomenal kernel extreme and use ki3 /ki4 modem, check my sig for bloatware which can be frozen.
Ps: if phenomenal extreme will end up in bootloop, use medium version, best approach, dl them both before flashing extreme
Tapatalked from my Samsung GT9100
Can you give me a link, cause theres too many to choose
right now im in this thread, but dont know what to choose..
http://forum.xda-developers.com/showthread.php?t=1601520
xxbs said:
Can you give me a link, cause theres too many to choose
right now im in this thread, but dont know what to choose..
http://forum.xda-developers.com/showthread.php?t=1601520
Click to expand...
Click to collapse
Just DL 5.5 Medium zip and extreme.zip, go to cwm and flash extreme, if boot stucks, wipe cache and dalvik, if its still not working, go to cwm again and flash medium.
if you DL them to the phone directly, rename it after dl cuz on the phone the name will be phenomenal5.zip in all cases!
If you use odin, dl the .tar files
Not too hard or?
Okay, ill do that, i will use odin.
Thanks again
Edit: It worked with Odin, now im on that kernel, thanks mate, im looking forward to see the battery improvement
xxbs said:
Okay, ill do that, i will use odin.
Thanks again
Edit: It worked with Odin, now im on that kernel, thanks mate, im looking forward to see the battery improvement
Click to expand...
Click to collapse
Great, which one ? extreme ? If yes, lucky you!
For further Battery Improvements, use BBS and post a dump in the desired thread.
Please do not use any benchmarks, they will not give you the best results on this kernel, as long as the phone is smooth, everything is fine!
Yes, extreme one
What do you mean with "use BBS and post a dump in the desired thread." ?
xxbs said:
Yes, extreme one
What do you mean with "use BBS and post a dump in the desired thread." ?
Click to expand...
Click to collapse
Means if you are not happy with your battery life and you want to work out your drainers, use this app and post a dump there --> http://forum.xda-developers.com/showthread.php?t=1179809
regards!
OK, Thanks alot for your time
Related
Hey I need some help. I keep trying to flash clean ics ROM. I'm on hb 1.50 rooted s on . I keep flash it and I keep to the boot screen then when I fell the little vibration to tell me the boots screen over it turns off right there. And yes I do.use my computer to get into twrp . Plz help I really wanna use this ROM
Sent from my PG86100 using XDA
http://forum.xda-developers.com/showthread.php?t=1639471
You need to flash that kernel when you install the rom.
I am going to try this right now, I hope this works, I've been trying for 2 days now going from stock to different ICS ROMS without being able to get past the HTC screen on a ROM
Before you do that you might try flashing the kernel out of the rom zip with Flash img gui, tell it to reboot to recovery and then flash the rom. The only reason I recommend this is that chads kernel will break 3d and mount sd via usb.
So I'm having the exact same symptoms as OP but I'm S-OFF and GSM, I don't know if there is something like the fix you posted birddog_61 that could help me in my case.
Unfortunately this did not work for me, I did a superwipe, flashed the ROM, and then flashed the kernel, then rebooted and still cannot get past the damn HTC screen, any other advice?
jursery said:
Unfortunately this did not work for me, I did a superwipe, flashed the ROM, and then flashed the kernel, then rebooted and still cannot get past the damn HTC screen, any other advice?
Click to expand...
Click to collapse
Curious question but have you tried any of the Sense 4.0 ROMs cause those work for me but whenever I install a 3.6 ROM(atleast the ones based on the leak) my phone reboots every 10 seconds, It's just a little odd that for such a rare problem, it'd be someone with such a different configuration that I have.
Jep4444 said:
Curious question but have you tried any of the Sense 4.0 ROMs cause those work for me but whenever I install a 3.6 ROM(atleast the ones based on the leak) my phone reboots every 10 seconds, It's just a little odd that for such a rare problem, it'd be someone with such a different configuration that I have.
Click to expand...
Click to collapse
Which ones are the Sense 4.0 cause I will gladly try one of those?
jursery said:
Which ones are the Sense 4.0 cause I will gladly try one of those?
Click to expand...
Click to collapse
Well I'm on GSM so we don't have the exact same ROMs but I used Shooter Ice, in my case flashing the boot.img for Shooter Ice over Virtuous 3.0.2(a ROM based on the leak) actually fixed the bootloop though the system was too unstable to use. But try something not based on the leak since that did work for me(though none of those ROMs are fully functional).
jursery said:
Unfortunately this did not work for me, I did a superwipe, flashed the ROM, and then flashed the kernel, then rebooted and still cannot get past the damn HTC screen, any other advice?
Click to expand...
Click to collapse
Ok try this, go back to a rom that will boot for you. Boot up and download Flash Image Gui. Now make sure the rom zip file is on your sd card. Open flash image gui and grant it super user permission, make sure kernel image is selected and also clear dalvik and clear cache are checked. Click on the browse button at the top and find the rom zip file on your sd card and tell the prompt yes to extract the kernel. Now it will flash the kernel and ask you to reboot, tell it to reboot to bootloader. From there get into recovery and flash your rom like normal.
birddog_61 said:
Ok try this, go back to a rom that will boot for you. Boot up and download Flash Image Gui. Now make sure the rom zip file is on your sd card. Open flash image gui and grant it super user permission, make sure kernel image is selected and also clear dalvik and clear cache are checked. Click on the browse button at the top and find the rom zip file on your sd card and tell the prompt yes to extract the kernel. Now it will flash the kernel and ask you to reboot, tell it to reboot to bootloader. From there get into recovery and flash your rom like normal.
Click to expand...
Click to collapse
Didn't work for me(not that I really thought it would but I'm pretty desperate at this point), if he's having the same issue I am(atleast the OP had the same bootloop I do), I know in my case it's the boot.img not getting along with something, what that something is I'm still trying to figure out though.
I just installed this AOKP+Aroma Installer ROM from this page: http://forum.xda-developers.com/showthread.php?t=1580449
And I have NEVER been able to get past the Start-Up screen. It reboots every 30 seconds from the moment I press "Start". Is anybody else having this problem with this ROM as well?
I'm using a Korean Atrix btw, MB861. I would REALLY appreciate the help!
EDIT: Okay, so I've gotten past the start-up screen by skipping everything (setting up time, Google account, etc.) and now I got to the lock screen. Now, if I don't touch the phone at all, it stays on. But once I try to unlock the phone, it is 100% SURE to reboot 30 seconds right after I unlock it. Is there no workaround for this??
marayag001 said:
I just installed this AOKP+Aroma Installer ROM from this page: http://forum.xda-developers.com/showthread.php?t=1580449
And I have NEVER been able to get past the Start-Up screen. It reboots every 30 seconds from the moment I press "Start". Is anybody else having this problem with this ROM as well?
I'm using a Korean Atrix btw, MB861. I would REALLY appreciate the help!
Click to expand...
Click to collapse
what is your previous rom?
Stock Korean ROM
leonardoaraujo said:
what is your previous rom?
Click to expand...
Click to collapse
I was on the stock ROM, GB 2.3.5, MB861...
I also used CWM Recovery to flash this, not ROM Racer's recovery, because for some reason ROM Racer's recovery didn't want to work on my Atrix. =.=
Atrix is its unlocked?
recovery is new? which?
I used CWM Recovery to flash this, not ROM Racer's recovery, because for some reason ROM Racer's recovery didn't want to work on my Atrix. And yes, phone's bootloader was unlocked an hour before I flashed the ROM..
marayag001 said:
I used CWM Recovery to flash this, not ROM Racer's recovery, because for some reason ROM Racer's recovery didn't want to work on my Atrix. And yes, phone's bootloader was unlocked an hour before I flashed the ROM..
Click to expand...
Click to collapse
I hope you do not mind so many questions ... lol
you have to do a "format / system" is needed .... (in recovery).
then you'll probably lose touch in recovery, proceed with the installation aroma ...
up / down = volume
enter = power button
= capacitive return any key.
leonardoaraujo said:
I hope you do not mind so many questions ... lol
you have to do a "format / system" is needed .... (in recovery).
then you'll probably lose touch in recovery, proceed with the installation aroma ...
up / down = volume
enter = power button
= capacitive return any key.
Click to expand...
Click to collapse
I already did that, twice. And still the same problem.
ok .... then try fastboot wipe (it worked for some users).
I get this also with all ics roms but im having bp problems that are probably causing that.. nottach 1.3.1 and darkside stripped down are only reliable,stable roms I can run personally... and even those its only in boot android bp pass mode. Cold boot linux.
Sent from my MB860 using XDA
In AROMA set Full Wipe, and try to install only one Launcher, and take a look Kernels screen, check your Kernel and select the correct, i think you are trying some FauxKernel try original 1100 or your kernel...
I've tried installing all three of Joker's kernels (1.0, 1.3, 1.45) and still my Atrix goes haywire. I've tried all kinds of installs (Default, Custom, Full Wipe, Non Wipe, etc.) but none have worked. I wanted this ICS ROM so bad! Is there anything I have to do before I flash this ROM again? I've flashed it maybe 10 times or so now.
Which is your Kernel? Try the oders, the firsts 4 Kernels, like 1100 and others, stock kernels.
I don't know if I want to try installing another kernel, because I don't want to brick my Atrix. I've tried looking for kernels that were made for AOKP, but to no avail. Maybe you could give me a link to a good kernel that will work for AOKP? It's been half a day, and I still haven't been able to use my device...
EDIT: I also noticed that I don't have any service, and the backlights for the softkeys aren't lighting up. So I now have three things to deal with: constant reboot, no service, and softkeys backlights.
you can install rom joker?
I haven't tried installing other ROMs... Do you mean this one? http://forum.xda-developers.com/showthread.php?t=1445052 I'll be downloading and installing it ASAP. I hope the problem goes away.
marayag001 said:
I haven't tried installing other ROMs... Do you mean this one? http://forum.xda-developers.com/showthread.php?t=1445052 I'll be downloading and installing it ASAP. I hope the problem goes away.
Click to expand...
Click to collapse
which hopefully for you, if the Joker rom work for you, check MD5 sum of my link and compare with your downloaded file, can be a bad download ...
leonardoaraujo said:
which hopefully for you, if the Joker rom work for you, check MD5 sum of my link and compare with your downloaded file, can be a bad download ...
Click to expand...
Click to collapse
I wasn't able to download Joker's ROM, however, I have tried other ROMs, namely Neutrino and the Official CM7 for Atrix. I noticed one thing that both ROMs worked properly, but they didn't have Google Apps pre-installed, so I had to get and install Gapps separately. Then, when I installed the Gapps, that's when the rebooting problem started again. I think my problem has something to do with Google Apps...
I have similar problem when I did install the AOKP from for the first time. It become unstable. I did fastboot to flash the wrapped the phone and install again with (current version is 37a) and it's become quite stable now.
Sent from my MB860 using xda premium
Problem is fixed!... For now.
I was doing a LOT of research today, and I found some info about rebooting Atrixes which involved radios. I studied this, and I found out that by flashing the correct radio file, I could potentially solve this issue. I just flashed this radio: http://forum.xda-developers.com/showthread.php?t=1260963 and the issue seems to be fixed. I am currently on this ROM: http://forum.xda-developers.com/showthread.php?t=1257574 and so far, the phone has been smooth as butter! I have yet to try with AOKP. I am going to report as soon as possible regarding this ROM. But so far, everything is A-OK! Thanks for all the help, everybody! You have all been very helpful!
marayag001 said:
I was doing a LOT of research today, and I found some info about rebooting Atrixes which involved radios. I studied this, and I found out that by flashing the correct radio file, I could potentially solve this issue. I just flashed this radio: http://forum.xda-developers.com/showthread.php?t=1260963 and the issue seems to be fixed. I am currently on this ROM: http://forum.xda-developers.com/showthread.php?t=1257574 and so far, the phone has been smooth as butter! I have yet to try with AOKP. I am going to report as soon as possible regarding this ROM. But so far, everything is A-OK! Thanks for all the help, everybody! You have all been very helpful!
Click to expand...
Click to collapse
Hello maraya... im using the same atrix mb861 korean 2.3.5 ... but i didnt find a thread or topic showing how to unlock bootloader or root for 2.3.5 ... plz help
thanks
Found the anwser....
Hello!
Like you see I don't have permissions to write on developer forum so I am asking here for my problem.
I have installed rom from here: http://forum.xda-developers.com/showthread.php?t=2265805
Everything is perfect on my Neo V, except one thing:
When I plug in charger or USB-PC cable, sound of connecting is audible but no state of charging is visible. When I enter into BATTERY menu in Settings, I can see increasing percents of battery level, but status of battery is "discharging". No icon of charging, no information on lock screen - nothing. It is frustrating My phone is rooted, CWM 6, kernel from package above. Can I do something to solve this problem?
Thank you for help everyone!
Michał
johny_noc said:
Hello!
Like you see I don't have permissions to write on developer forum so I am asking here for my problem.
I have installed rom from here: http://forum.xda-developers.com/showthread.php?t=2265805
Everything is perfect on my Neo V, except one thing:
When I plug in charger or USB-PC cable, sound of connecting is audible but no state of charging is visible. When I enter into BATTERY menu in Settings, I can see increasing percents of battery level, but status of battery is "discharging". No icon of charging, no information on lock screen - nothing. It is frustrating My phone is rooted, CWM 6, kernel from package above. Can I do something to solve this problem?
Thank you for help everyone!
Michał
Click to expand...
Click to collapse
PS. I see forest of hands to help me
I do not use this rom, but I try to help you with some this advice message.
You should try to reflash the stock firmware (the whole firmware, including kernel) and verify if the charging icon appear, then if you like the custom rom, try to flash it again, but be careful with each installation steps.
Try also to clear the battery status from CWM before flashing custom rom.
ciubexx said:
I do not use this rom, but I try to help you with some this advice message.
You should try to reflash the stock firmware (the whole firmware, including kernel) and verify if the charging icon appear, then if you like the custom rom, try to flash it again, but be careful with each installation steps.
Try also to clear the battery status from CWM before flashing custom rom.
Click to expand...
Click to collapse
Hello!
Thank you for answering my question!
Before installing this ROM everything works fine. Now battery shows how many energy left in percent, but when connecting phone to charger it doesn't show "charging" state. I will try to reset battery status before installing this ROM but I do not know if there is such option in CWM 6.
The second problem I saw yesterday is Gallery app crash, when trying to view picture from Camera app. It shows message "unfortunately, app Gallery was stopped". I was trying to clear cache, data, Dalvik cache - no results.
I will try to do what you've said and report back if it helps.
Best regards,
Michał
Hello again!
I've done what you asking for unfortunately with no success... All work fine without charging status and Gallery app (camera app, gallery app, recorder app). Any other ideas?
Thank you,
Michał
The charging issue is present on stock room too?
Or only on this customized rom?
I'll suggest to use for a couples of days stock room to see if the phone is stable: charging ok and the applications do not crash.
Then, if all is ok with the stock room installed, try another customized room or this custom room, but with another custom kernel.
I have my phone (Neo = MT15i) from november 2012, and on the first 4 ... 5 months I used at least one customized room, but in the final I given up to all customized room, and I use a stock room with only few application from a customized room. (InfiniteView, System UI and Calculator).
On stock ROM everything is OK. Do you really think it could be kernel problem? If yes then I wait for update of this kernel.
I also removed batterystats.bin using special app with no effects with charging state. Is there any possibility to change built Gallery app which includes Camera app and sound recorder app?
Besides of described problems I don't see anything else. I though the battery problem can be solved changing something in scripts...
What is strange, that when I connect a cable I hear special sound which signalize charger is plugged in.
Could you propose me a stable kernel compatible with android 4.2.2 (CyanogenMod 10.1)?
Thank you VERY MUCH for response and help!
Michał
Anyone??
Can anyone help me, please?
Stock firmware is slow (full of SONY app which are useless), but this (4.2.2) is much faster, but has bugs...
Sorry for this delayed message, as I mentioned above I did not use / used this firmware.
I suggest you to try different ROM based on ICS or JB, look at this post list: [REF][ALL Roms,Kernels ,firmwares for NEO/V/L ][14.07.2013][ACTIVELY UPDATED]
ciubexx said:
Sorry for this delayed message, as I mentioned above I did not use / used this firmware.
I suggest you to try different ROM based on ICS or JB, look at this post list: [REF][ALL Roms,Kernels ,firmwares for NEO/V/L ][14.07.2013][ACTIVELY UPDATED]
Click to expand...
Click to collapse
Hello!
I used another 4.2.2 ROM and the same issue appears... I repeat: on Stock ROM everything is OK...
Best regards,
Michał
johny_noc said:
Hello!
I used another 4.2.2 ROM and the same issue appears... I repeat: on Stock ROM everything is OK...
Best regards,
Michał
Click to expand...
Click to collapse
That's strange. I've using CM10 (JB 4.1.2) and CM10.1 (JB 4.2.2) since long time and never had this issue. Try re-flashing the kernel or try another cable
Regards
I've done reflashing... Trying to use other kernel, trying to do "fresh flash" (install stock ROM from .tft file then all procedure with rooting and CWM install). No results. Now I have kernel nAa+ 3.4.51 (maybe it is bugged)...
now I am on this ROM: http://forum.xda-developers.com/showthread.php?t=2358730
Michał
johny_noc said:
I've done reflashing... Trying to use other kernel, trying to do "fresh flash" (install stock ROM from .tft file then all procedure with rooting and CWM install). No results. Now I have kernel nAa+ 3.4.51 (maybe it is bugged)...
now I am on this ROM: http://forum.xda-developers.com/showthread.php?t=2358730
Michał
Click to expand...
Click to collapse
Hi,
nAa 3.4.51 works fine, I've been using it with DarkRom since it was released and never had your problem. You can try to flash latest nAa kernel 3.4.53 from DD thread (he released it on Saturday). It works fine and includes the latest changes
@milanjm - Thank you for your reply!
I have some questions:
1. Do I need to wipe something or reflashing ROM after this kernel installation?
2. What are "modules" in this thread? Do I need to install them too?
johny_noc said:
Do I need to wipe something or reflashing ROM after this kernel installation?
Click to expand...
Click to collapse
yes only format system,
on jb (cm10) do wipe battery stats in CWM >advanced>wipe battery stats
tiestobunio said:
yes only format system,
on jb (cm10) do wipe battery stats in CWM >advanced>wipe battery stats
Click to expand...
Click to collapse
Could you please answer all questions? Thank you.
johny_noc said:
@milanjm - Thank you for your reply!
I have some questions:
1. Do I need to wipe something or reflashing ROM after this kernel installation?
2. What are "modules" in this thread? Do I need to install them too?
Click to expand...
Click to collapse
1.. Flash another kernel like alfs 09c then in CWM do format system and full wipe then instal this rom .
2.Modules are the same as all roms , on cm9,cm10 is another but you have cm6/7 .
johny_noc said:
@milanjm - Thank you for your reply!
I have some questions:
1. Do I need to wipe something or reflashing ROM after this kernel installation?
2. What are "modules" in this thread? Do I need to install them too?
Click to expand...
Click to collapse
Here you have a detailed process:
1. Flash the kernel (fastboot)
2. Enter in recovery and format /system (only that) in mount option
3. Flash ROM
4. Flash modules (they are for WiFi)
5. Wipe dalvik (in advanced option)
6. Reboot
Let's hope this will solve your problem
@milanjm - Thank you for detailed instructions!
I will try to flash this new kernel after work (now I am at work ) and will inform you if something changes.
@tiestobunio - Thank you for pointing a good GB ROM.
I will flash it if every solution fails. I won't go back to 2.3.x GB now from known reasons.
johny_noc said:
@milanjm - Thank you for detailed instructions!
I will try to flash this new kernel after work (now I am at work ) and will inform you if something changes.
@tiestobunio - Thank you for pointing a good GB ROM.
I will flash it if every solution fails. I won't go back to 2.3.x GB now from known reasons.
Click to expand...
Click to collapse
Good luck
Hello all
I have searched all over but have not found any similar problems.
I rooted my phone and installed CWM and would like to install a custom rom that exists for Gingerbread 2.3.6 (I flashed back to stock OS), I have found the rom that I seem to like a lot (Atomic rom) however when I put the .zip file into my external sd and use rom manager to install the rom it turns off, then the phone boots back up... Any ideas about what is happening? Maybe I do not have everything rom manager needs?
I am definitely not ready to flash the new rom using odin, unless you put the .zip file into PDA section and hit "Start" when the phone is in download mode... from the forums I read it is not as easy as installing the stock OS
Thanks in advance!
HeyLookItsKarl said:
Hello all
I have searched all over but have not found any similar problems.
I rooted my phone and installed CWM and would like to install a custom rom that exists for Gingerbread 2.3.6 (I flashed back to stock OS), I have found the rom that I seem to like a lot (Atomic rom) however when I put the .zip file into my external sd and use rom manager to install the rom it turns off, then the phone boots back up... Any ideas about what is happening? Maybe I do not have everything rom manager needs?
I am definitely not ready to flash the new rom using odin, unless you put the .zip file into PDA section and hit "Start" when the phone is in download mode... from the forums I read it is not as easy as installing the stock OS
Thanks in advance!
Click to expand...
Click to collapse
you leave so many questions unanswered here. you have provided some information here, but not the vital info and the last part is very confusing.
im sorry, I know you are new here, but you lead me to ask some very generic questions....................
are you in the right forum for the right phone? this is for the Note1
I only ask this because I cant even find any GB ROMS for this phone. the Note 1 has been updated to official JB. I would and I am sure you would hate to flash wrong files to wrong phone and wind up with a BRICK.
I am not trying to make it sound as if you don't even know what phone you have, but you would not be the first to flash wrong and kill your phone.
may I suggest you read up in the "Super Everything Thread", which is in the General Forum. you will find exactly that, EVERYTHING, there. Odin is no big deal and super easy to use. also most don't even use CWM or ROM MANAGER anymore. TWRP is now the RECOVERY of choice and much more user friendly.
there are also many YOUTUBE tutorals that can walk you through. but first, lets make sure you are in the right place.
your phone is a ???????? NOTE 1
you carrier is ?????? att, tmo, ver, sprint
it is presently running ??????? GB, ICS, JB
good luck and let us know if we help
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
shayneflashindaily said:
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
Click to expand...
Click to collapse
SAUROM !!!!
captemo said:
you leave so many questions unanswered here. you have provided some information here, but not the vital info and the last part is very confusing.
im sorry, I know you are new here, but you lead me to ask some very generic questions....................
are you in the right forum for the right phone? this is for the Note1
I only ask this because I cant even find any GB ROMS for this phone. the Note 1 has been updated to official JB. I would and I am sure you would hate to flash wrong files to wrong phone and wind up with a BRICK.
I am not trying to make it sound as if you don't even know what phone you have, but you would not be the first to flash wrong and kill your phone.
may I suggest you read up in the "Super Everything Thread", which is in the General Forum. you will find exactly that, EVERYTHING, there. Odin is no big deal and super easy to use. also most don't even use CWM or ROM MANAGER anymore. TWRP is now the RECOVERY of choice and much more user friendly.
there are also many YOUTUBE tutorals that can walk you through. but first, lets make sure you are in the right place.
your phone is a ???????? NOTE 1
you carrier is ?????? att, tmo, ver, sprint
it is presently running ??????? GB, ICS, JB
good luck and let us know if we help
Click to expand...
Click to collapse
Sorry about that... I have the Samsung Galaxy Note i717 for AT&T and I am running Gingerbread 2.3.6
I thought that if a rom could run on GB it could run on any phone that has GB but your response has lead me to know that it also depends on what phone I'm running, so thanks!
I'll go and double check to see if the rom I tried to install was for the note... I guess I'm lucky I didn't brick my phone when I tried flashing the other 2 rome xD... Gonna count my blessings tonight lol
HeyLookItsKarl said:
Sorry about that... I have the Samsung Galaxy Note i717 for AT&T and I am running Gingerbread 2.3.6
I thought that if a rom could run on GB it could run on any phone that has GB but your response has lead me to know that it also depends on what phone I'm running, so thanks!
I'll go and double check to see if the rom I tried to install was for the note... I guess I'm lucky I didn't brick my phone when I tried flashing the other 2 rome xD... Gonna count my blessings tonight lol
Click to expand...
Click to collapse
don't need to apologize to me for anything. the more information the better. not only are there so many phones out there, there are variations of those phones that have gotten people in trouble.
you have the North American version
International version
Korean version
different internals and wont all take same ROM. just be careful my friend.
shayneflashindaily said:
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
Click to expand...
Click to collapse
I am looking into this rom, looks pretty interesting. Flashing the "AT&T fix" though, do I put that on my SD card also?
Update: For some reason I can not install rome
I am not sure what I am doing wrong because I have Rom manager do everything when I put the .zip file on my SD card and the phone restarts like normal, I even tried doing it manually in cwm recovery. I have no idea what I am doing wrong. And this rom I know for sure is meant for GB and the i717.
Any suggestions? Thanks again
You mean it's a gb rom meant for the i717 galaxy note....... I think you may be a little mixed up on what a rom is and what your actually doing...... Explain in detail what exact steps your doing when your flashing the rom so someone can help you.
2§HAYNE
shayneflashindaily said:
You mean it's a gb rom meant for the i717 galaxy note....... I think you may be a little mixed up on what a rom is and what your actually doing...... Explain in detail what exact steps your doing when your flashing the rom so someone can help you.
2§HAYNE
Click to expand...
Click to collapse
I appreciate your patience
Step 1: I put the downloaded .zip rom (saurom) into my external sd card in a special folder I named Roms
Step 2: I fire up Rom manager and go to "Install ROM from SD Card"
Step 3: Go to folder containing the Saurom .zip file and select it
Step 4: Make sure "Backup Existing Rom" and "Wipe Data and Cache" are selected
Step 5: Hit "Reboot And Install"
The phone will then turn off and restart like normal, I check but the rom did not install. I honestly have no idea how I'm screwing up lol
Do you have a custom recovery installed....
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
HeyLookItsKarl said:
I appreciate your patience
Step 1: I put the downloaded .zip rom (saurom) into my external sd card in a special folder I named Roms
Step 2: I fire up Rom manager and go to "Install ROM from SD Card"
Step 3: Go to folder containing the Saurom .zip file and select it
Step 4: Make sure "Backup Existing Rom" and "Wipe Data and Cache" are selected
Step 5: Hit "Reboot And Install"
The phone will then turn off and restart like normal, I check but the rom did not install. I honestly have no idea how I'm screwing up lol
Click to expand...
Click to collapse
You have to understand this as well, the ROMS do not install in conjunction or within the current Stock ROM. They replace them. So as stated above you have to make sure you have CWM or TWRP installed and boot directly to the custom recovery. Then wipe your data/system/cache/dalvik and after all of that install the ROM of choice.
http://forum.xda-developers.com/showthread.php?t=1525341
The very first thing listed in this topic is how to install Saurom. No where does it say to try and do it through ROM Manager.
Maybe that is where your hiccup is coming from?
No further instructions needed good luck and happy flashing
2§HAYNE
ZacksBuilds said:
Do you have a custom recovery installed....
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yes
KSoD said:
You have to understand this as well, the ROMS do not install in conjunction or within the current Stock ROM. They replace them. So as stated above you have to make sure you have CWM or TWRP installed and boot directly to the custom recovery. Then wipe your data/system/cache/dalvik and after all of that install the ROM of choice.
http://forum.xda-developers.com/showthread.php?t=1525341
The very first thing listed in this topic is how to install Saurom. No where does it say to try and do it through ROM Manager.
Maybe that is where your hiccup is coming from?
Click to expand...
Click to collapse
Alright so I forgot that I had to wipe the data/system / cache / dalvik
But even when I tried that just now and went into installing the .zip file it said that the installation failed, is it because cwm was removed when I wiped the device?
Update your recovery to twrp 2.6
Sent from my SGH-I717 using xda app-developers app
What would updating the recovery do?
Gets rid of status 7 error that makes it unable to flash.
Sent from my SGH-I717 using xda app-developers app
HeyLookItsKarl said:
Yes
Alright so I forgot that I had to wipe the data/system / cache / dalvik
But even when I tried that just now and went into installing the .zip file it said that the installation failed, is it because cwm was removed when I wiped the device?
Click to expand...
Click to collapse
How do you forget that? That's the whole point besides actually flashing the rom... It's a must.... Smfh
2§HAYNE
ZacksBuilds said:
Gets rid of status 7 error that makes it unable to flash.
Sent from my SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
So could I flash using GooManager?
shayneflashindaily said:
How do you forget that? That's the whole point besides actually flashing the rom... It's a must.... Smfh
2§HAYNE
Click to expand...
Click to collapse
haha, only problem is that the rom hit an error anyways so I'm still lost at what I am doing wrong...
Another question, when I reset all of the settings and stuff before I flash the rom, wouldn't that get rid of titanium back up? then how would I restore my apps and data?
Yes you are right... But first stick your phone in the freezer for 2hrs...then microwave it for 3 mins... It will cause your recovery to reconstruct and see your internal storage enabling developer options to be on... Then hit the rom installer button.
2§HAYNE
---------- Post added at 03:36 AM ---------- Previous post was at 03:33 AM ----------
Disregard last post I put..... Go to super everything thread.....
2§HAYNE
Hi everyone. This is my first post...anyways, been playing around with a gt-i9100 and have flashed many ROMs successfully. The latest (and best) being slim saber. I THOUGHT it was soooo easy! Haha! Wrong! Recently flashed the experimental cm11. Did the customary cwm backup, wiped cacheband partition, formatted, and wiped dalvik. Installed and Booted up fine. From reading that thread I'm experiencing the same common problems. The two worst are the battery level is out of whack and cwm can't read the SD card or micro SD. Smaller problems include can't adjust screen brightness and any apps on SD get deleted after reboot. Other smaller issues also. The overall speed is great and battery life is better than 4.3 ROMs.
Now, the real problem...because cwm can't read SD, I can't go reinstall my backup, which was my plan. Unable to flash new because downloads also go to sd, which is unreadable. Performed a backup of the current rom and its going to the phone memory. Is there anyway to move my nanadroid backup or new ROM there so cwm can see it and I can flash or any other suggestions? Any help would be greatly appreciated!!!
hawaiisteve said:
Hi everyone. This is my first post...anyways, been playing around with a gt-i9100 and have flashed many ROMs successfully. The latest (and best) being slim saber. I THOUGHT it was soooo easy! Haha! Wrong! Recently flashed the experimental cm11. Did the customary cwm backup, wiped cacheband partition, formatted, and wiped dalvik. Installed and Booted up fine. From reading that thread I'm experiencing the same common problems. The two worst are the battery level is out of whack and cwm can't read the SD card or micro SD. Smaller problems include can't adjust screen brightness and any apps on SD get deleted after reboot. Other smaller issues also. The overall speed is great and battery life is better than 4.3 ROMs.
Now, the real problem...because cwm can't read SD, I can't go reinstall my backup, which was my plan. Unable to flash new because downloads also go to sd, which is unreadable. Performed a backup of the current rom and its going to the phone memory. Is there anyway to move my nanadroid backup or new ROM there so cwm can see it and I can flash or any other suggestions? Any help would be greatly appreciated!!!
Click to expand...
Click to collapse
Flash apolo 6.1 tar from Odin, then you get cwm back.
full wipe n flash stock rom to aviod ny further problems n then install your backup after rooting again
Jimsilver73 said:
Flash apolo 6.1 tar from Odin, then you get cwm back.
Click to expand...
Click to collapse
thanks, Jim! can you direct me to a link to download apolo? been searching high and low...cant seem to find it...
hawaiisteve said:
thanks, Jim! can you direct me to a link to download apolo? been searching high and low...cant seem to find it...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2291756&page=314
First post ?
Not sure why you couldn't find it though, comes up straight away when I search for it?? Do you type in the search box for all forums xda?
Jimsilver73 said:
http://forum.xda-developers.com/showthread.php?t=2291756&page=314
First post ?
Not sure why you couldn't find it though, comes up straight away when I search for it?? Do you type in the search box for all forums xda?
Click to expand...
Click to collapse
Thanks again! Found it after all...I was using an ooolllllddd pc with really bad connection...everytime I clicked that link nothing happened. Went home and tried on mine and presto! It opened!
hawaiisteve said:
Thanks again! Found it after all...I was using an ooolllllddd pc with really bad connection...everytime I clicked that link nothing happened. Went home and tried on mine and presto! It opened!
Click to expand...
Click to collapse
OK, glad your sorted now. Have fun playing with new kk, think I'm gonna wait a couple of weeks till the devs iron out the teething problems ?
Jimsilver73 said:
OK, glad your sorted now. Have fun playing with new kk, think I'm gonna wait a couple of weeks till the devs iron out the teething problems ?
Click to expand...
Click to collapse
Man Jim, u gonna hate me lol. Unfortunately apolo 6.1 is a zip file, and as far as my research has gone, no way to convert it to tar for odin flash. any other suggestions? I think the only way might be to revert to stock and root again like bhavstech recommended. I'm not desperate, as it is still usable and I have another phone so I'll wait a while and hope someone can enlighten me...thanks!
hawaiisteve said:
Man Jim, u gonna hate me lol. Unfortunately apolo 6.1 is a zip file, and as far as my research has gone, no way to convert it to tar for odin flash. any other suggestions? I think the only way might be to revert to stock and root again like bhavstech recommended. I'm not desperate, as it is still usable and I have another phone so I'll wait a while and hope someone can enlighten me...thanks!
Click to expand...
Click to collapse
LOL - I forgot!! I think there is a tar file for 4.1 - use that, or use latest dori (either 8.43 or 9.43) it doesn't matter which because you will be re installing your back up which will have its own recovery img.
Hope this helps :cyclops:
Jimsilver73 said:
LOL - I forgot!! I think there is a tar file for 4.1 - use that, or use latest dori (either 8.43 or 9.43) it doesn't matter which because you will be re installing your back up which will have its own recovery img.
Hope this helps :cyclops:
Click to expand...
Click to collapse
Hey Jim I got it fixed using dori! Funny because the latest 4.4 addressed both of my major issues...stubborn me decided to try it out and I gotta say its pretty good! Stable but just a few broken apps and small issues. Gonna five it a try as a daily driver...thanks again!!!!
use odin to flash tar and then install and older rom which is functional with the sdcard. and then flash back your backups.