I just installed this AOKP+Aroma Installer ROM from this page: http://forum.xda-developers.com/showthread.php?t=1580449
And I have NEVER been able to get past the Start-Up screen. It reboots every 30 seconds from the moment I press "Start". Is anybody else having this problem with this ROM as well?
I'm using a Korean Atrix btw, MB861. I would REALLY appreciate the help!
EDIT: Okay, so I've gotten past the start-up screen by skipping everything (setting up time, Google account, etc.) and now I got to the lock screen. Now, if I don't touch the phone at all, it stays on. But once I try to unlock the phone, it is 100% SURE to reboot 30 seconds right after I unlock it. Is there no workaround for this??
marayag001 said:
I just installed this AOKP+Aroma Installer ROM from this page: http://forum.xda-developers.com/showthread.php?t=1580449
And I have NEVER been able to get past the Start-Up screen. It reboots every 30 seconds from the moment I press "Start". Is anybody else having this problem with this ROM as well?
I'm using a Korean Atrix btw, MB861. I would REALLY appreciate the help!
Click to expand...
Click to collapse
what is your previous rom?
Stock Korean ROM
leonardoaraujo said:
what is your previous rom?
Click to expand...
Click to collapse
I was on the stock ROM, GB 2.3.5, MB861...
I also used CWM Recovery to flash this, not ROM Racer's recovery, because for some reason ROM Racer's recovery didn't want to work on my Atrix. =.=
Atrix is its unlocked?
recovery is new? which?
I used CWM Recovery to flash this, not ROM Racer's recovery, because for some reason ROM Racer's recovery didn't want to work on my Atrix. And yes, phone's bootloader was unlocked an hour before I flashed the ROM..
marayag001 said:
I used CWM Recovery to flash this, not ROM Racer's recovery, because for some reason ROM Racer's recovery didn't want to work on my Atrix. And yes, phone's bootloader was unlocked an hour before I flashed the ROM..
Click to expand...
Click to collapse
I hope you do not mind so many questions ... lol
you have to do a "format / system" is needed .... (in recovery).
then you'll probably lose touch in recovery, proceed with the installation aroma ...
up / down = volume
enter = power button
= capacitive return any key.
leonardoaraujo said:
I hope you do not mind so many questions ... lol
you have to do a "format / system" is needed .... (in recovery).
then you'll probably lose touch in recovery, proceed with the installation aroma ...
up / down = volume
enter = power button
= capacitive return any key.
Click to expand...
Click to collapse
I already did that, twice. And still the same problem.
ok .... then try fastboot wipe (it worked for some users).
I get this also with all ics roms but im having bp problems that are probably causing that.. nottach 1.3.1 and darkside stripped down are only reliable,stable roms I can run personally... and even those its only in boot android bp pass mode. Cold boot linux.
Sent from my MB860 using XDA
In AROMA set Full Wipe, and try to install only one Launcher, and take a look Kernels screen, check your Kernel and select the correct, i think you are trying some FauxKernel try original 1100 or your kernel...
I've tried installing all three of Joker's kernels (1.0, 1.3, 1.45) and still my Atrix goes haywire. I've tried all kinds of installs (Default, Custom, Full Wipe, Non Wipe, etc.) but none have worked. I wanted this ICS ROM so bad! Is there anything I have to do before I flash this ROM again? I've flashed it maybe 10 times or so now.
Which is your Kernel? Try the oders, the firsts 4 Kernels, like 1100 and others, stock kernels.
I don't know if I want to try installing another kernel, because I don't want to brick my Atrix. I've tried looking for kernels that were made for AOKP, but to no avail. Maybe you could give me a link to a good kernel that will work for AOKP? It's been half a day, and I still haven't been able to use my device...
EDIT: I also noticed that I don't have any service, and the backlights for the softkeys aren't lighting up. So I now have three things to deal with: constant reboot, no service, and softkeys backlights.
you can install rom joker?
I haven't tried installing other ROMs... Do you mean this one? http://forum.xda-developers.com/showthread.php?t=1445052 I'll be downloading and installing it ASAP. I hope the problem goes away.
marayag001 said:
I haven't tried installing other ROMs... Do you mean this one? http://forum.xda-developers.com/showthread.php?t=1445052 I'll be downloading and installing it ASAP. I hope the problem goes away.
Click to expand...
Click to collapse
which hopefully for you, if the Joker rom work for you, check MD5 sum of my link and compare with your downloaded file, can be a bad download ...
leonardoaraujo said:
which hopefully for you, if the Joker rom work for you, check MD5 sum of my link and compare with your downloaded file, can be a bad download ...
Click to expand...
Click to collapse
I wasn't able to download Joker's ROM, however, I have tried other ROMs, namely Neutrino and the Official CM7 for Atrix. I noticed one thing that both ROMs worked properly, but they didn't have Google Apps pre-installed, so I had to get and install Gapps separately. Then, when I installed the Gapps, that's when the rebooting problem started again. I think my problem has something to do with Google Apps...
I have similar problem when I did install the AOKP from for the first time. It become unstable. I did fastboot to flash the wrapped the phone and install again with (current version is 37a) and it's become quite stable now.
Sent from my MB860 using xda premium
Problem is fixed!... For now.
I was doing a LOT of research today, and I found some info about rebooting Atrixes which involved radios. I studied this, and I found out that by flashing the correct radio file, I could potentially solve this issue. I just flashed this radio: http://forum.xda-developers.com/showthread.php?t=1260963 and the issue seems to be fixed. I am currently on this ROM: http://forum.xda-developers.com/showthread.php?t=1257574 and so far, the phone has been smooth as butter! I have yet to try with AOKP. I am going to report as soon as possible regarding this ROM. But so far, everything is A-OK! Thanks for all the help, everybody! You have all been very helpful!
marayag001 said:
I was doing a LOT of research today, and I found some info about rebooting Atrixes which involved radios. I studied this, and I found out that by flashing the correct radio file, I could potentially solve this issue. I just flashed this radio: http://forum.xda-developers.com/showthread.php?t=1260963 and the issue seems to be fixed. I am currently on this ROM: http://forum.xda-developers.com/showthread.php?t=1257574 and so far, the phone has been smooth as butter! I have yet to try with AOKP. I am going to report as soon as possible regarding this ROM. But so far, everything is A-OK! Thanks for all the help, everybody! You have all been very helpful!
Click to expand...
Click to collapse
Hello maraya... im using the same atrix mb861 korean 2.3.5 ... but i didnt find a thread or topic showing how to unlock bootloader or root for 2.3.5 ... plz help
thanks
Found the anwser....
Related
This is only for Telus Fascinate not Verizon Fascniate!!
I'm not good at speaking English just you know (or can somebody rewrite this for me??)
As you know, Telus Fascinate is pretty simillar to Galaxy I9000
The differences between those two are FF Camera, buttons, and some others
Okay Ill shut up and let you know how to flash MIUI/CM7 rom
Flash it at your own risk!!! I'm not responsible for anythings that you just did!! This is only for people who know how to fix your 700$ toy. Read Carefully.!! There might be alot of bugs when you are using this methoud.
Things that you need
1. speedmod-kernel-k13c-500hz.tar
2. Newest Version of MIUI Rom or Newest Version of CM7 Rom
3. cm7-galaxys-initial-kernel.tar
4. galaxy-efsbackup.zip
5. [CM7/MIUI]Telus Fascinate Platypus Kernel
Here is How! (How to flash it, when you are using stock Froyo Rom)
1. Get those files download
2. Copy all these files into your Phone (except speedmod-kernel-k13c-500hz.tar & cm7-galaxys-initial-kernel.tar files)
3. Get into download mode and than flash speedmod-kernel-k13c-500hz.tar with using odin (do not check mark on the repartition!)
4. Get into recovery mode and than install galaxys-efsbackup.zip
5. Turn off your device and than get into download mode again
6. Install cm7-galaxys-initial-kernel.tar with using odin again (do not check mark on the repartition and auto reboot!!!)
7. Unplug your USB and than get into recovery mode again
8. Choose "mounts & storage" and format system, data, and cache
9. Flash MIUI Rom or CM7 Rom
10. Reboot your device and you will see MIUI rom booting and make sure you are in service and 3g working fine. If you dont get any of that you might have to go back to stock Froyo rom and do this steps again.
11. If you have service and 3g data working, go to recovery mode again!!
14. After done flashing it install [CM7/MIUI]Telus Fascinate Platypus Kernel kernel from recovery
15. Reboot your device and you will be running MIUI Rom or CM7 Rom
Starting from Telus Fascinate Platypus Kernle Quorra-r8, there is no need of changing home key and back key
16. There is a problem between home key and back key. They are reversed. so Donload Root Explorer app
17. Run Root Explorer and than go look for /system/usr/keylayout/cypress-touchkey.kl longpress of cypress-touchkey.kl file and you will see Open in Text Editor Press it
18. you will see in your text
key 139 MENU VIRTUAL
key 102 HOME VIRTUAL
key 158 BACK VIRTUAL
key 217 SEARCH VIRTUAL
19. Change this in to
key 139 MENU VIRTUAL
key 158 HOME VIRTUAL
key 102 BACK VIRTUAL
key 217 SEARCH VIRTUAL
20. and save it and reboot your device!!!!!
Please read this guide carefully and flash it at your own risk!!!!!
Sorry for my Bad English !!!!!
Thanks to (please dontae them!!)
The MIUI9000 team :MAMBO04, jblanc and Kenia
CyanogenMod team
zacharias.maladroit for the Kernel Build (Big thanks to you!!)
I know that you guys will understand my guide
I would be happy to test this on my device. Glad to see more roms/tutorials for the telus facinate.
Sent from my GT-I9000 using XDA App
Tested, with my modded way to install CM7 (Cant access recovery with hard key got me hard time ( I am not sharing this way to install as it's really dangerous)). Confirming that everyting is working very well on my phone. + I love this ^^. thx man.
chadouming said:
( I am not sharing this way to install as it's really dangerous)).
Click to expand...
Click to collapse
can you pm me about this part?? i want to test it too.
Which CM 7 files do you recommend using: Galaxy S or Vibrant?
What about flashing back the Telus modem?
daoom said:
Which CM 7 files do you recommend using: Galaxy S or Vibrant?
What about flashing back the Telus modem?
Click to expand...
Click to collapse
I recommend to use GALAXYS and you dont need to worry about flashing back the Telus modem cause it is fine to use jvk modem.
If you want it, i can make one for you.
harimgs said:
I recommend to use GALAXYS and you dont need to worry about flashing back the Telus modem cause it is fine to use jvk modem.
If you want it, i can make one for you.
Click to expand...
Click to collapse
I'm sure it's somewhere already, but it would be nice of you to add it
daoom said:
I'm sure it's somewhere already, but it would be nice of you to add it
Click to expand...
Click to collapse
Can you submit a telus modem file for me??
Magnetic detector isn't working. Has some issues getting to HSPA (Stays on 3g) but everything else works.
I'll rewrite this bad boy for you if you wish.
nvm, I was wrong lol
Doc_rockulus said:
Magnetic detector isn't working. Has some issues getting to HSPA (Stays on 3g) but everything else works.
I'll rewrite this bad boy for you if you wish.
Click to expand...
Click to collapse
you mean g-sensor(gravity sensor) right?
just reboot your device few times 2~3 times, its just a normal problem that everyone has
danboard said:
nvm, I was wrong lol
Click to expand...
Click to collapse
you was wrong about what?
harimgs said:
you mean g-sensor(gravity sensor) right?
just reboot your device few times 2~3 times, its just a normal problem that everyone has
Click to expand...
Click to collapse
No, I'm refering to the built in geo-magnetic sensor. Essentially the built in compass.
Edit: But the accelerometer doesn't work either, I don't particularly care about that.
Also, occasionally after being plugged in, the software seems to ignore the fact that it's charging until reboot. That one sucks because it stops charging while I'm sleeping.
Camera app occasionally won't display a preview until the phone is locked/unlocked with the app open. Widgets disappear puriodically, and sometimes it won't let me fruit ninja
Hey harimgs,
is it normal to constantly bootloop on miui? My phone will bootloop 3 or 4 times then finally boot on the 5th.
danboard said:
Hey harimgs,
is it normal to constantly bootloop on miui? My phone will bootloop 3 or 4 times then finally boot on the 5th.
Click to expand...
Click to collapse
The first few times it takes a while, I think the boot animation is too long/too short. I changed it to a different one (Through the theme manager) and it boots a lot quicker now.
Do I have to flash the CM7_TELUS-FASCINATE_platypus-kernel_20110418_16_core.zip and then the WiFi fix? Or can I just flash the Wifi fix?
Doc_rockulus said:
Do I have to flash the CM7_TELUS-FASCINATE_platypus-kernel_20110418_16_core.zip and then the WiFi fix? Or can I just flash the Wifi fix?
Click to expand...
Click to collapse
You gotta flash CM7_TELUS-FASCINATE_platypus-kernel_20110418_16_core.zip and than if your wifi works and everythung else works fine, you dont have to flash wifi fix kernel. If dont flash it
Sent from my GT-I9000 using XDA Premium App
So, say I wanted to overclock the phone, afaik there is no kernel allowing to do that, right? Supercurio's didn't allow it when I used it on my 959D to load Darky's and SimplyHoney and I just flashed CM7 using the instructions in this thread (so I'm now running Platypus kernel).
Also, is there a lagfix included with CM7?
Hey! I was using 2.3.3 miui rom with Platypus everything worked fine, I upgraded myself to the new miui rom which uses 2.3.4 and problem is when I flash the kernel if wont go past the cm7 boot logo. I have flashed it several times and reinstalled the rom still same issue.
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Hi Folks,
Hope you are well - wasn't sure if anyone has come across this - but anyone seen the Recovery mode flickering / scrolling when flashed on a locked Galaxy Tab 10.1?
Thanks again!
I'm using CWM 4.0.0.4 on my locked P7510, works as intended.
http://forum.xda-developers.com/showthread.php?t=1171089
Thanks yqed,
For some reason when I have CWM 4.0.0.4, and when I reboot into the recovery mode - CWM shows up - but the screen keeps on flickering / scrolling / refreshing all over the place.
I'm wondering if there is something different in my Retail Galaxy Tab 10.1 WIFI vs. the others - I bought mine from Korea (retail). Appears that I have kernel version 2.6.36.3 instead of .4 and the build is EH14.
Thanks.
I to get some lag while using the cmw...
Sent from my Galaxy Tab!
+1
I have a Korean 32Gb wifi Galaxy Tab 10.1, and my CWM Recovery also starts having a seizure when I boot into it. It still seems to be working fine, but it is nearly impossible to use.
I would really like to know what causes this issue.
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
frankus0512 said:
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
Click to expand...
Click to collapse
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
castiel19 said:
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
Click to expand...
Click to collapse
Are you using the cwm5?
I'M just curious if so and you still get issues.
Sorry I can't really help.
If you can read this it was sent using my GT-P7510.
HOPING solution
frankus0512 said:
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Click to expand...
Click to collapse
Did you try CMW 5? Preshoot has a tutorial in the development section, its pretty simple just follow it and I think and hope that your issue would be solved!
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Misledz said:
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Click to expand...
Click to collapse
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
---------- Post added at 12:49 PM ---------- Previous post was at 12:40 PM ----------
castiel19 said:
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
Click to expand...
Click to collapse
how can i copy link of youtube here?? i want to show my screen flicker
Just link it here,
HTML:
[media=youtube] bracket [/media]
Where "bracket" is the ID of your video, those letters at the end. EG: FL7yD-0pqZg
Have you tried Overcome's CWM? I'm using that and it's perfectly fine. PS it's the ver 5 release.
PS; For being an epic House fan I shall see to it that you get it worked out
And to top that off, an offlink to the CWM of Overcome http://www.mediafire.com/?6c5tdmds927npdv
PS: Here's your video, Embedded anyways.
I'm on the same page. My screen flicker after entering CWM recovery mode. Very annoying.
In the development section for 10.1 I was just reading in a thread about a Korean ROM, Pershoot stated something about someones device not being compatible with his kernel. I don't know if either one has to do with the other but I think I read in the same thread of someone having "this problem"
Honestly don't know if anything between this thread and that thread are relevant to each other.
Just thought I'd mention it to see if it helps. sorry if it doesn't apply to anything here.
I somehow fixed it by flashing the tab with an non-HK 3.1 stock ROM using Odlin. then then cwm recovery works fine.
Not really a fix but
You could always just find a pre rooted rom to flash with odin, then once u have the pre rooted rom installed get rom manager and u will no longer have to worry about cwm. Plus u could then flash to whatever rom u need to using rom manager.
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Still not working
appreciate your help Misledz, 002001-Overcome_CWM_Recovery_v5.1.2.6 got same result.. my screen still flicker..
I think I will give up on CWM too complicated for me
Can you just give me tips on how to root my tab 10.1 without CWM (if that is possible)
sunnymui said:
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
What Stock Rom did you use? a, planning to download stock rom
P7510ZCLA1 ## 2012 February P7510OZHLA1 China Download
From samfirmware and flash... hope I can use CWM and instal ROM
for the past 3 hours I tried to search pre rooted ROM that can be flash using Odin with no avail
hi.
i flashed stock rom S5830XWKS2 through Odin. the phone started rebooting randomly.
then i flashed custom rom TheMyth KS3 but the problem kept getting worse. when i'm using the phone, it reboots every few seconds.
i flashed stock rom S5830XWKS3. but the Baseband version in the phone didnt change (S5830XWKS2). and the problem is still persistent.
the phones does not do full reboot. it freezes, the screen goes black, then goes strait to the boot animation.
also, if it reboots while transferring files through mass usb storage, the transfer doesnt stop, to continues normally.
1. any idea why is this happening?
2. why didnt the baseband version change when i flashed KS3?
3. do you recommend another stock rom to flash.
p.s: KS3 seems fast. i got 1040 score in quadrant on stock rom.
i would appreciate any help. thanks
dali47 said:
hi.
i flashed stock rom S5830XWKS2 through Odin. the phone started rebooting randomly.
then i flashed custom rom TheMyth KS3 but the problem kept getting worse. when i'm using the phone, it reboots every few seconds.
i flashed stock rom S5830XWKS3. but the Baseband version in the phone didnt change (S5830XWKS2). and the problem is still persistent.
the phones does not do full reboot. it freezes, the screen goes black, then goes strait to the boot animation.
also, if it reboots while transferring files through mass usb storage, the transfer doesnt stop, to continues normally.
1. any idea why is this happening?
2. why didnt the baseband version change when i flashed KS3?
3. do you recommend another stock rom to flash.
p.s: KS3 seems fast. i got 1040 score in quadrant on stock rom.
i would appreciate any help. thanks
Click to expand...
Click to collapse
Hey !
The Baseband Version is KS2 while Build is KS9 (in my stock rom)
If you end in Bootloops, press Power + Home till you get into recovery, then Clear data/Factory Reset and clear Cache, then reboot.
Come back and tell me if it worked for you.
Greetings
thank you for your reply.
it's actually not a bootloop. the phone boots normally and works fine for some times (few seconds/minutes) then it freezes for few seconds, then the screen turns black for a second, then shows the boot animation (doesn't show the boot screen with the samsung logo). it works fine for some time, then again.
it seems that the problem is related to the wifi. it only happens when wifi is on.
On Samfirmware.com they say that you should make a Factory Reset after flashing, maybe that works for you ? I flashed the KS9 Stock today and had some problems till I did this in Recovery. Else I would have no Idea, maybe reflash or get another Version ?
You could also try to install any custom Rom, like Jusada´s ICS for example, just to test if there are problems with CM also ..
Umm, maybe a question to those who only touch the Earth to answer our Newb questions...is it possible that the Ace restarts when it get´s attacked from the outside ? I faced that after flashing a Rom that I modified and didn´t have the right Permissions the Phone restarted/bootlooped when I tried to install any App (\data\app wasn´t set correct)
Greetings
thank you. i guess i'll try to flash again. or maybe try a different stock.
dali47 said:
thank you. i guess i'll try to flash again. or maybe try a different stock.
Click to expand...
Click to collapse
If you had the Android SDK Tools , you could show me a logcat of what's going on
EmoBoiix3 said:
If you had the Android SDK Tools , you could show me a logcat of what's going on
Click to expand...
Click to collapse
hi. i do have the sdk. here are a few log files:
http://pastebin.com/Amt00nuY
http://pastebin.com/SHeasfvq
http://pastebin.com/sirV2FEe
this is the first time i use logcat, so if there is a command or option i should use to make the log file more useful, just let me know.
thank you for your time
dali47 said:
hi. i do have the sdk. here are a few log files:
http://pastebin.com/Amt00nuY
http://pastebin.com/SHeasfvq
http://pastebin.com/sirV2FEe
this is the first time i use logcat, so if there is a command or option i should use to make the log file more useful, just let me know.
thank you for your time
Click to expand...
Click to collapse
The original TheMyth creator said that KS3 was badly unstable .
Use KS2 instead
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
The original TheMyth creator said that KS3 was badly unstable .
Use KS2 instead
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
He should try to upgrade to KS3 v1.1. That's final update for TheMyth KS3 with:
- Meizu Myth theme
- BLN Control activated
- changed some small things
>> I think this update can help him to solve frequent random reboot in TheMyth KS3
http://mobile.livemodding.com/forum/398-samsung-galaxy-ace/
Click to expand...
Click to collapse
my first attempt was with KS2. that's when the problem started, even before i install TheMyth. The 1.1 update didnt help either.
I guess my phone is not getting along with the KS2 baseband. i will just switch to GingerReal, hopefully it will be stable.
thank you everyone
Hey I need some help. I keep trying to flash clean ics ROM. I'm on hb 1.50 rooted s on . I keep flash it and I keep to the boot screen then when I fell the little vibration to tell me the boots screen over it turns off right there. And yes I do.use my computer to get into twrp . Plz help I really wanna use this ROM
Sent from my PG86100 using XDA
http://forum.xda-developers.com/showthread.php?t=1639471
You need to flash that kernel when you install the rom.
I am going to try this right now, I hope this works, I've been trying for 2 days now going from stock to different ICS ROMS without being able to get past the HTC screen on a ROM
Before you do that you might try flashing the kernel out of the rom zip with Flash img gui, tell it to reboot to recovery and then flash the rom. The only reason I recommend this is that chads kernel will break 3d and mount sd via usb.
So I'm having the exact same symptoms as OP but I'm S-OFF and GSM, I don't know if there is something like the fix you posted birddog_61 that could help me in my case.
Unfortunately this did not work for me, I did a superwipe, flashed the ROM, and then flashed the kernel, then rebooted and still cannot get past the damn HTC screen, any other advice?
jursery said:
Unfortunately this did not work for me, I did a superwipe, flashed the ROM, and then flashed the kernel, then rebooted and still cannot get past the damn HTC screen, any other advice?
Click to expand...
Click to collapse
Curious question but have you tried any of the Sense 4.0 ROMs cause those work for me but whenever I install a 3.6 ROM(atleast the ones based on the leak) my phone reboots every 10 seconds, It's just a little odd that for such a rare problem, it'd be someone with such a different configuration that I have.
Jep4444 said:
Curious question but have you tried any of the Sense 4.0 ROMs cause those work for me but whenever I install a 3.6 ROM(atleast the ones based on the leak) my phone reboots every 10 seconds, It's just a little odd that for such a rare problem, it'd be someone with such a different configuration that I have.
Click to expand...
Click to collapse
Which ones are the Sense 4.0 cause I will gladly try one of those?
jursery said:
Which ones are the Sense 4.0 cause I will gladly try one of those?
Click to expand...
Click to collapse
Well I'm on GSM so we don't have the exact same ROMs but I used Shooter Ice, in my case flashing the boot.img for Shooter Ice over Virtuous 3.0.2(a ROM based on the leak) actually fixed the bootloop though the system was too unstable to use. But try something not based on the leak since that did work for me(though none of those ROMs are fully functional).
jursery said:
Unfortunately this did not work for me, I did a superwipe, flashed the ROM, and then flashed the kernel, then rebooted and still cannot get past the damn HTC screen, any other advice?
Click to expand...
Click to collapse
Ok try this, go back to a rom that will boot for you. Boot up and download Flash Image Gui. Now make sure the rom zip file is on your sd card. Open flash image gui and grant it super user permission, make sure kernel image is selected and also clear dalvik and clear cache are checked. Click on the browse button at the top and find the rom zip file on your sd card and tell the prompt yes to extract the kernel. Now it will flash the kernel and ask you to reboot, tell it to reboot to bootloader. From there get into recovery and flash your rom like normal.
birddog_61 said:
Ok try this, go back to a rom that will boot for you. Boot up and download Flash Image Gui. Now make sure the rom zip file is on your sd card. Open flash image gui and grant it super user permission, make sure kernel image is selected and also clear dalvik and clear cache are checked. Click on the browse button at the top and find the rom zip file on your sd card and tell the prompt yes to extract the kernel. Now it will flash the kernel and ask you to reboot, tell it to reboot to bootloader. From there get into recovery and flash your rom like normal.
Click to expand...
Click to collapse
Didn't work for me(not that I really thought it would but I'm pretty desperate at this point), if he's having the same issue I am(atleast the OP had the same bootloop I do), I know in my case it's the boot.img not getting along with something, what that something is I'm still trying to figure out though.
Hi,
First of all, im a bit of a noob.
Second, i have rooted my phone, a SG2 GT-i9100 XWLPD.
And no matter what i do, it just wont succeed to install roms, every ones i tried, get stuck on boot screen. i have remembered to wipe.
Then i go to CWM, and install again, cause i read somewhere you maybe should do it twice. nothing.
Then i reverted to stock, that works.
Tried again, nothing.
I have tried
Thebyani_v4.3_ICS
Spike.pure.ics-v7.4
Villainrom 2.4.2
All to XWLPD.
What to do ?
Not sure what happens when you try those roms, but you can try the ICS Reseruction ROM which is the best ROM out there for SG2. Here is the link to the ROM page:
http://forum.xda-developers.com/showthread.php?t=1436854
You can install it using the following steps:
-Reboot into recovery (CWM)
-Wipe Data / Factory Reset
-Install the Main ROM
-In recovery go to Advanced
-Wipe Dalvik Cache
-Fix Permissions
-Wipe Cache Partition
-Reboot
-If at the first boot you can't do the configuration of the google account, skip this step and continue
-When you boot into the system, it's probably that you don't have data enabled (3g, H+) just reboot
-When you boot again into the system the data will be enable and you can do the configuration of Google Account (if you don't do this before)
-This is the moment for install all the extras like themes, fix's, kernels, etc.
Enjoy!!!
Thanks, ill try that..
I really wants a battery saver rom, if you know any better ones.
Edit: Didn't work, starts up, goes to samsung logo, with the triangle, goes to ICS siyahkernel, then it reboots to recovery mode (CWMR Touch v5.5.0.4)
Any advise?
xxbs said:
Hi,
First of all, im a bit of a noob.
Second, i have rooted my phone, a SG2 GT-i9100 XWLPD.
And no matter what i do, it just wont succeed to install roms, every ones i tried, get stuck on boot screen. i have remembered to wipe.
Then i go to CWM, and install again, cause i read somewhere you maybe should do it twice. nothing.
Then i reverted to stock, that works.
Tried again, nothing.
I have tried
Thebyani_v4.3_ICS
Spike.pure.ics-v7.4
Villainrom 2.4.2
All to XWLPD.
What to do ?
Click to expand...
Click to collapse
Get used to work with Odin, that's all!
Just read, there are so many descriptions out there!
Second, if your phone was delivered with ics (lpd) do not attempt to flash a GB ROM (vr 2.4.2] since it will not work with an ics bootloader!
Some ROM's are not running as standalone, they are mostly offset roms based on cm9 examples are slim ics or Clean blank ROM, don't know whether the roms you named are like this.
So, all you need is Odin (or mobile Odin) and a ROM in .tar.md5 format.
I recommend litening rom 3.2 which is fully deodexed and close to stock.
Good luck!
Tapatalked from my Samsung GT9100
Or you can try NEAT. It's stock and has gr8 battery.
I don't think it's the roms... u might do something wrong... follow the steps:
1. Reboot into recovery
2. Factory reset
3. Wipe cache, dalvik, battery stats
4. Install the rom
5. Reboot system
I always do that and never had a problem.
Good luck!
Sent from my awesome SGS2
Karpfenhai said:
Get used to work with Odin, that's all!
Just read, there are so many descriptions out there!
Second, if your phone was delivered with ics (lpd) do not attempt to flash a GB ROM (vr 2.4.2] since it will not work with an ics bootloader!
Some ROM's are not running as standalone, they are mostly offset roms based on cm9 examples are slim ics or Clean blank ROM, don't know whether the roms you named are like this.
So, all you need is Odin (or mobile Odin) and a ROM in .tar.md5 format.
I recommend litening rom 3.2 which is fully deodexed and close to stock.
Good luck!
Tapatalked from my Samsung GT9100
Click to expand...
Click to collapse
IT WORKED! you are my hero now, thanks alot mate !
A good video about ICS Resurrection features
http://galaxys2root.com/galaxy-s2-roms/resurrection-ics-rom-v2-0-for-galaxy-s2-i9100-best-ics-rom/
xxbs said:
IT WORKED! you are my hero now, thanks alot mate !
Click to expand...
Click to collapse
You're welcome
If you really want to save battery, go for phenomenal kernel extreme and use ki3 /ki4 modem, check my sig for bloatware which can be frozen.
Ps: if phenomenal extreme will end up in bootloop, use medium version, best approach, dl them both before flashing extreme
Tapatalked from my Samsung GT9100
Can you give me a link, cause theres too many to choose
right now im in this thread, but dont know what to choose..
http://forum.xda-developers.com/showthread.php?t=1601520
xxbs said:
Can you give me a link, cause theres too many to choose
right now im in this thread, but dont know what to choose..
http://forum.xda-developers.com/showthread.php?t=1601520
Click to expand...
Click to collapse
Just DL 5.5 Medium zip and extreme.zip, go to cwm and flash extreme, if boot stucks, wipe cache and dalvik, if its still not working, go to cwm again and flash medium.
if you DL them to the phone directly, rename it after dl cuz on the phone the name will be phenomenal5.zip in all cases!
If you use odin, dl the .tar files
Not too hard or?
Okay, ill do that, i will use odin.
Thanks again
Edit: It worked with Odin, now im on that kernel, thanks mate, im looking forward to see the battery improvement
xxbs said:
Okay, ill do that, i will use odin.
Thanks again
Edit: It worked with Odin, now im on that kernel, thanks mate, im looking forward to see the battery improvement
Click to expand...
Click to collapse
Great, which one ? extreme ? If yes, lucky you!
For further Battery Improvements, use BBS and post a dump in the desired thread.
Please do not use any benchmarks, they will not give you the best results on this kernel, as long as the phone is smooth, everything is fine!
Yes, extreme one
What do you mean with "use BBS and post a dump in the desired thread." ?
xxbs said:
Yes, extreme one
What do you mean with "use BBS and post a dump in the desired thread." ?
Click to expand...
Click to collapse
Means if you are not happy with your battery life and you want to work out your drainers, use this app and post a dump there --> http://forum.xda-developers.com/showthread.php?t=1179809
regards!
OK, Thanks alot for your time