problem after installing Wolfs TW Gingerbread - XPERIA X10 Q&A, Help & Troubleshooting

hi, I just installed this custom rom on my x10i, it went all fine, but problem is that I no longer have internet connectivity. 3g won't work (I can turn on, but it won't show, and I can't download configurations from where it was previously, nothing shows up under settings>sony ericsson) and also, wi-fi isn't working. whenever I try to turn it on, it says "error" and won't turn on.
what to do? this rom is awesome, impressively fast than stock 2.3 on my x10, but without internet, it's useless....
thanks in advance

fael097 said:
hi, I just installed this custom rom on my x10i, it went all fine, but problem is that I no longer have internet connectivity. 3g won't work (I can turn on, but it won't show, and I can't download configurations from where it was previously, nothing shows up under settings>sony ericsson) and also, wi-fi isn't working. whenever I try to turn it on, it says "error" and won't turn on.
Click to expand...
Click to collapse
Have you done dalvik-cache wipe and erased cache partition? Also,are you on .71 baseband?
For wifi, have you flashed its kernel modules?
fael097 said:
... , but without internet, it's useless....
Click to expand...
Click to collapse
Your opinion But I am using same ROM without data plan and I am happy Sometimes wifi in restarnts in the streets are enough and free

The wifi could also mean that you havent flashed your roms wifi modules zip normally done in xrecovery
Sent from my CM7 Zmod / doomkernels v6 UL BL X10!
(And all that without bricking it) so far atleast.

HeliumX10 said:
Your opinion But I am using same ROM without data plan and I am happy Sometimes wifi in restarnts in the streets are enough and free
Click to expand...
Click to collapse
if I only had wi-fi. but I don't have any kind of internet right now heh
I did everything I was supposed to:
Factory Reset (Full wipe)
Wipe Cache Partition
Wipe Dalvik Cache
then I installed the rom, and flashed the FTF package
it says baseband 2.1.71 and kernel 2.6.29-00054 and etc. is that right?
the only thing I flashed was this FTF file. do I have to do anything other than that? idk how to flash my roms wifi modules, really new to this thing.
thanks guys

now I can't enter xrecovery anymore... so I went to troubleshooting:
Q: I'm experiencing problems with my xRecovery?
A: Make sure you have the latest version of xRecovery if Wolf hasn't included it yet.
You can get it HERE. Flash this over current recovery and should be fixed.
Click to expand...
Click to collapse
but there's only a .zip version of the xrecovery, I can't flash it through flashtool. and I obviously can't enter xrecovery to install xrecovery again. god this is confusing. what to do?

Suggest Back from Beginning
fael097 said:
now I can't enter xrecovery anymore... so I went to troubleshooting:
but there's only a .zip version of the xrecovery, I can't flash it through flashtool. and I obviously can't enter xrecovery to install xrecovery again. god this is confusing. what to do?
Click to expand...
Click to collapse
ZIP cannot be flashed in PC's Flashtool, but in Xrecovery my friend. TFT is for PC flashtool. If you wanna back where you begin, i suggest you follow this link's method. Worked as promised
http://forum.xda-developers.com/showthread.php?t=1196421
For ensuring your Future of changing new ROMS. Feel free to Send private message if got more doubts TQ
whitefang
fael097 said:
if I only had wi-fi. but I don't have any kind of internet right now heh
I did everything I was supposed to:
Factory Reset (Full wipe)
Wipe Cache Partition
Wipe Dalvik Cache
then I installed the rom, and flashed the FTF package
it says baseband 2.1.71 and kernel 2.6.29-00054 and etc. is that right?
the only thing I flashed was this FTF file. do I have to do anything other than that? idk how to flash my roms wifi modules, really new to this thing.
thanks guys
Click to expand...
Click to collapse
Try Full wipe again (ALERT THAT YOUR DATA WILL LOSS in your PHONE) if you can. THEN ,FOLLOW link i sent ya before and their instructions, videos. Best way is watch and learn. Have a nice day.
sincerely,
whitefang
PS: if you don't want to restart, you may have to find links that contains your downloaded WF ROM either is for unlocked/locked. Normally, wolfbreak will put its module links at his/her first post.
Feel free to PM if you want. Try my best

Related

[Q] Want to flash Wolf's gingerbread ROM v4

Hi
I want to flash my X10i with a custom ROM, but I'm a big time noob. I have been digging these forums for the past 2 hours as to what to flash and how. Decided to flash Wolf's TW Gingerbread 2.3.3 v 4.0.4. But I'm not sure how to go about this.
My phone stats:
model number x10I
firmware version 2.1
baseband version 2.1.54
kernel version 2.6.29
build number 2.1.A.0.435
I haven't done ANYTHING with my phone yet. It is not locked with any carrier, or whatever you call it. I bought the phone. Please let me know how to go about this. I have downloaded the below from wolf's post.
Wolf_GB_2.3_TW_V4.zip for Baseband 71 (The ROM itself!)
FTF bundle (2.3.3 kernel and baseband .71)
Much appreciated!
..JusT Try 2 Help..
You better UpDate your 2.1 X10i with PC Companion/SEUS to GB 2.3 first DuDe..
After that download a Flash Tool and follow TuT carefully from here http://forum.xda-developers.com/showthread.php?t=1196808
Try it and let me know if you've any problem..
If your phone is 2.1, you can easily root it so you can install xrecovery 0.3.
Search the Flashtool tutorial; root and install xrec and then you just have to install Wolf's package trough xrec
need help
i'm tryin to install the latest version of wb rom but my version of xrecovery isn't working what do i do.
Q Rock said:
i'm tryin to install the latest version of wb rom but my version of xrecovery isn't working what do i do.
Click to expand...
Click to collapse
How did you installed xrecovery ?
Did you used the recovery .apk installer?
Follow this process...
http://forum.xda-developers.com/showthread.php?t=920746
1. download flashtool from above link.
2. connect you phone in the flash mode (back button pressed)
if needed use this guide
http://forum.xda-developers.com/showthread.php?t=928343
3. root the phone again (follow the instructions in the flash tool exact way)
4. install xrecovery using the flash tool
Please report back if this fixed your issue...
Also, FYI... in order to flash 2.3 you need to even flash the 2.3 baseband and kernel... Just follow the dev's instruction (better use wolf ROM)...
runaway_bunny said:
How did you installed xrecovery ?
Did you used the recovery .apk installer?
Follow this process...
http://forum.xda-developers.com/showthread.php?t=920746
1. download flashtool from above link.
2. connect you phone in the flash mode (back button pressed)
if needed use this guide
http://forum.xda-developers.com/showthread.php?t=928343
3. root the phone again (follow the instructions in the flash tool exact way)
4. install xrecovery using the flash tool
Please report back if this fixed your issue...
Also, FYI... in order to flash 2.3 you need to even flash the 2.3 baseband and kernel... Just follow the dev's instruction (better use wolf ROM)...
Click to expand...
Click to collapse
that's how i installed it for wb v3.5. but now it isn't working i even tried installing it again with the flashtool but it still doesn't work. won't mount sd card or something keeps saying its busy.
Q Rock said:
that's how i installed it for wb v3.5. but now it isn't working i even tried installing it again with the flashtool but it still doesn't work. won't mount sd card or something keeps saying its busy.
Click to expand...
Click to collapse
But ur phone is rooted right?
Open flash tool in ur comp.
Just connect phone (not in flash mode, just the normal mode).
Flash tool will detect your x10.
Just hit the button "install recovery".
this will install/repair ur xrecovery.
Please try and let me know if this worked...
do i absolutetly need busybox for this to work.
Q Rock said:
do i absolutetly need busybox for this to work.
Click to expand...
Click to collapse
nope. Just follow my last post instruction and lemme know if it worked...
WB's directions say that i need to do a factory reset is that necessary as well
your directions didn't help. still says device or resource busy. do i need to flash 2.1 and go straight to v4
Q Rock said:
WB's directions say that i need to do a factory reset is that necessary as well
Click to expand...
Click to collapse
Yes ! Whatever the steps he mentioned are all needed to be followed.
Also do a batery stats wipe as well, as it will solve a lot of problems in the future.
Q Rock said:
your directions didn't help. still says device or resource busy. do i need to flash 2.1 and go straight to v4
Click to expand...
Click to collapse
flash 2.1 if that's the case and start from the scratch !
Good luck !
runaway_bunny said:
flash 2.1 if that's the case and start from the scratch !
Good luck !
Click to expand...
Click to collapse
i really don't want to do that so imma just stick with v3.5
4.04 -> 2.1 -> 4.04
Q Rock said:
i really don't want to do that so imma just stick with v3.5
Click to expand...
Click to collapse
My personal experience:
Had WB 3.5
When 4.04s came out, did update to 4 and then to 4.04.
But had issues with Titanium Backup etc., etc. Kind of not so fast ROM it was.
Did backup everything, formatted sdcard etc.
Flashed 2.1 Generic
Upgraded with SEUS to 2.3.3
Rooted
Then did 4.0 and 4.04 updates
Did reinstall from market needed software, not restore with Titanium Backup (except some, unrelated to system).
NOW it runs superfast and supersmooth! I figure - thats how it was supposed to run. No ANY issues at all.
P.S. My battery holds 3 full days with normal usage.
does anyone have issues with lag when using live wallpapers
http://forum.xda-developers.com/showthread.php?t=1240999
step by step

[Q] Help, Cant use my phone anymore :(

i just decided to move back to CyanogenMod 7 and i flashed kernel and when i went to clockworkmod i just installed cyanogenmod.zip but i forgot to wipe everything, then i just took battery off during rom installation and now when i try to install rom it just gives me error ;( please help me can i use flashtool?
Akizella said:
i just decided to move back to CyanogenMod 7 and i flashed kernel and when i went to clockworkmod i just installed cyanogenmod.zip but i forgot to wipe everything, then i just took battery off during rom installation and now when i try to install rom it just gives me error ;( please help me can i use flashtool?
Click to expand...
Click to collapse
Make full wipe and maybe helps redownload copy rom.zip.
Sent from my MT15i using Tapatalk
Akizella said:
i just decided to move back to CyanogenMod 7 and i flashed kernel and when i went to clockworkmod i just installed cyanogenmod.zip but i forgot to wipe everything, then i just took battery off during rom installation and now when i try to install rom it just gives me error ;( please help me can i use flashtool?
Click to expand...
Click to collapse
Yes you can use flashtool. Don't forget to mark wipe options in it.
And please tell me, what on earth did you thought when you got idea to remove battery in process of flashing ROM??
Thanks for fast answers
i know it was stupid i tried to remove those zips from sd card (GApps + CM), re downloaded them and wiped cache, dalvik cache, battery stats, and you know all wipe and tried to flash kernel again still error can you guys give me link to the stock global, bacause on that "all neo firmware download" there is multiupload links only wich dont seem to work for me? (since 3 weeks ago i cant open multiupload is it down?) thanks
Akizella said:
i know it was stupid i tried to remove those zips from sd card (GApps + CM), re downloaded them and wiped cache, dalvik cache, battery stats, and you know all wipe and tried to flash kernel again still error can you guys give me link to the stock global, bacause on that "all neo firmware download" there is multiupload links only wich dont seem to work for me? (since 3 weeks ago i cant open multiupload is it down?) thanks
Click to expand...
Click to collapse
You can try flashing it with wotan server.
hey thanks madfysh wotanserver seems really nice program! never heard program called that really thanks for help ^^
Akizella said:
hey thanks madfysh wotanserver seems really nice program! never heard program called that really thanks for help ^^
Click to expand...
Click to collapse
I'm glad you brought it back to life
Now go from start, and don't pull out battery in the middle of process.
99% can be fixed, even if you flashed something wrong, but pulling battery out when you realize you are doing something wrong makes those 99% goes dooooown loooow
Ye ye i know this things dont worry ^^ im old on all these rooting things

[Q] Lost WIFI after flashing/recovery

Hi all!
My wifi is not working at all on my xperia neo mt15i. In wi-fi settings it just says "Error". Trying to enable wifi: "Turning on ..." flashes by and then "Error".
Here is the story:
It used to work of course. Until yesterday. A few days ago I reverted from 4.0.2.A.0.62 to 4.0.2.A.43 (?) and rooted it. Then I upgraded to 62 OTA. This was of course to get root. No problems here, wifi working.
Then, yesterday I wanted to test ICS. So I unlocked the bootloader with instructions from sonyericsson using fastboot in linux. Went smooth and I confirmed the unlock. Flashed an ICS kernel with fastboot. Went into recovery, wiped all, did an update with a zip, rebooted. But here I got stuck on SONY logo at boot.
So I went into CWM recovery and did a recovery to the backup I made before unlocking bootloader. After booting everything looked good, but I did not check wifi. Went to sleep and this morning I realized that I had lost wifi. Could not get it to work at all.
So I tried once more to do recovery of same backup. This time I wiped caches, factory reset and wiped dalvik-cache before recover backup. After boot, same problem with wifi.
So, what do I do now? I have searched forums but have no clue. Please help!
I had a look in logcat and found this:
E/WifiService( 268): Failed to load Wi-Fi driver.
Is there a mismatch between kernel and wifi-driver? How come, since I did a recovery I would suppose both kernel and all drivers would be recovered and match?
Which ICS you used, since you say you flashed zip? And stock one is in img.
Is it possible that you didn't wipe system partition before flashing zip? I made same mistake yesterday, and got to stuck on sony screen Even though I didn't move to some different rom, but the same, so it's strange, but never mind.
Then you say you went back to your backup(.62 ?), did you also flash your old kernel?
So what kernel do you have now on your phone? Stock?
---------- Post added at 11:34 AM ---------- Previous post was at 11:32 AM ----------
yogodo said:
I would suppose both kernel and all drivers would be recovered and match?
Click to expand...
Click to collapse
Ah, there's problem kernel isn't contained in backup made from CWM. You need to flash it trough fastboot.
Madfysh said:
Which ICS you used, since you say you flashed zip? And stock one is in img.
Is it possible that you didn't wipe system partition before flashing zip? I made same mistake yesterday, and got to stuck on sony screen Even though I didn't move to some different rom, but the same, so it's strange, but never mind.
Then you say you went back to your backup(.62 ?), did you also flash your old kernel?
So what kernel do you have now on your phone? Stock?
---------- Post added at 11:34 AM ---------- Previous post was at 11:32 AM ----------
Ah, there's problem kernel isn't contained in backup made from CWM. You need to flash it trough fastboot.
Click to expand...
Click to collapse
First I followed this guide: http://forum.xda-developers.com/showthread.php?t=1468866, to get root and then go to 4.0.2.A.0.62.
Then for ICS I followed this guide: http://forum.xda-developers.com/showthread.php?t=1517794.
So the nandroid backup does not contain the kernel. I will try to flash kernel from 4.0.2.A.0.62 since it would match my backup. I hope
Thank you Madfysh for your help.
I will come back here later this evening or so and report the result.
Cheers!
Yup, I'm using same ROM now. Most likely you forgot to wipe/format something, as I did yesterday
Strange is that before I flashed that zip I was already on that ROM, so not sure why not wiping system partition confused it, but..
Maybe I will try ICS again first. Making sure I wipe everything.
But as I recall I think I followed the instructions.
1) I flashed the ICS kernel
2) Boot to CWM and wiped all I could wipe in the menues, even advanced/wipe dalvik-cache, and factory reset or whatever. Instruction says "format system, format data, format cache". I can't find that in CWM menues though. Is THAT my problem (with ICS)?
3) Flash update zip and reboot. Here it got stuck on SONY logo. Waited at least 15 minutes.
So maybe there is something I missed to format/wipe/clean?
By the way: if I now look at kernel version it says 2.6.32.9-perf which I think is the kernel from 4.0.2.A.0.62. So it did recover that from the backup? No?
yogodo said:
Instruction says "format system, format data, format cache". I can't find that in CWM menues though. Is THAT my problem (with ICS)?
Click to expand...
Click to collapse
Yup, there's your problem
My phone is on charger now so I can't check to be 100% sure, but I think those options are under mount and storage.
yogodo said:
By the way: if I now look at kernel version it says 2.6.32.9-perf which I think is the kernel from 4.0.2.A.0.62. So it did recover that from the backup? No?
Click to expand...
Click to collapse
No. It's just Sony didn't change kernel version.
That doesn't mean you can use kernel for GB on ICS and vice versa.
Madfysh said:
Yup, there's your problem
..., but I think those options are under mount and storage.
Click to expand...
Click to collapse
Sir! You are absolutely correct! I just booted to CWM and there they are!
Madfysh said:
No. It's just Sony didn't change kernel version.
That doesn't mean you can use kernel for GB on ICS and vice versa.
Click to expand...
Click to collapse
OK, thank you!
And thank you again
To night I WILL try ICS again, wiping even more!
Cheers!
I realized I had everything I needed at hands: ICS kernel, ICS update. Go for it!
So I rebooted to CWM and did all wiping and formatting. Then update with zip, reboot. And now I've got ICS! Nice! Everything thing seems to work alright, awesome!
Problem solved then.
Glad we solved that
Enjoy in ICS.
But you got it working in ICS. Same is happening for me. Its working in ICS but not on GB.
I am on Droid 3 which has locked bootloader & I have read that Locked bootloader = NO Kernel Replacement. Hence facing same wifi issue.
kapilthio said:
But you got it working in ICS. Same is happening for me. Its working in ICS but not on GB.
I am on Droid 3 which has locked bootloader & I have read that Locked bootloader = NO Kernel Replacement. Hence facing same wifi issue.
Click to expand...
Click to collapse
Oh yes, I've got it working. The problem was that I mistakenly had the wrong kernel. I went from GB to ICS switching kernel and everything. Then I tried to go back to GB but I did not switch back the old kernel.
I actually never tried again to go back to GB since I got it working in ICS. But I suppose it would work in GB if I switch kernel and install my recovery backup.
Good luck!
kapilthio said:
But you got it working in ICS. Same is happening for me. Its working in ICS but not on GB.
I am on Droid 3 which has locked bootloader & I have read that Locked bootloader = NO Kernel Replacement. Hence facing same wifi issue.
Click to expand...
Click to collapse
Droid phones are different and can flash kernel &devtree from recovery.
Sent from my MT11i using Tapatalk

[Q]Flashing several roms, nothing works.

Hi,
First of all, im a bit of a noob.
Second, i have rooted my phone, a SG2 GT-i9100 XWLPD.
And no matter what i do, it just wont succeed to install roms, every ones i tried, get stuck on boot screen. i have remembered to wipe.
Then i go to CWM, and install again, cause i read somewhere you maybe should do it twice. nothing.
Then i reverted to stock, that works.
Tried again, nothing.
I have tried
Thebyani_v4.3_ICS
Spike.pure.ics-v7.4
Villainrom 2.4.2
All to XWLPD.
What to do ?
Not sure what happens when you try those roms, but you can try the ICS Reseruction ROM which is the best ROM out there for SG2. Here is the link to the ROM page:
http://forum.xda-developers.com/showthread.php?t=1436854
You can install it using the following steps:
-Reboot into recovery (CWM)
-Wipe Data / Factory Reset
-Install the Main ROM
-In recovery go to Advanced
-Wipe Dalvik Cache
-Fix Permissions
-Wipe Cache Partition
-Reboot
-If at the first boot you can't do the configuration of the google account, skip this step and continue
-When you boot into the system, it's probably that you don't have data enabled (3g, H+) just reboot
-When you boot again into the system the data will be enable and you can do the configuration of Google Account (if you don't do this before)
-This is the moment for install all the extras like themes, fix's, kernels, etc.
Enjoy!!!
Thanks, ill try that..
I really wants a battery saver rom, if you know any better ones.
Edit: Didn't work, starts up, goes to samsung logo, with the triangle, goes to ICS siyahkernel, then it reboots to recovery mode (CWMR Touch v5.5.0.4)
Any advise?
xxbs said:
Hi,
First of all, im a bit of a noob.
Second, i have rooted my phone, a SG2 GT-i9100 XWLPD.
And no matter what i do, it just wont succeed to install roms, every ones i tried, get stuck on boot screen. i have remembered to wipe.
Then i go to CWM, and install again, cause i read somewhere you maybe should do it twice. nothing.
Then i reverted to stock, that works.
Tried again, nothing.
I have tried
Thebyani_v4.3_ICS
Spike.pure.ics-v7.4
Villainrom 2.4.2
All to XWLPD.
What to do ?
Click to expand...
Click to collapse
Get used to work with Odin, that's all!
Just read, there are so many descriptions out there!
Second, if your phone was delivered with ics (lpd) do not attempt to flash a GB ROM (vr 2.4.2] since it will not work with an ics bootloader!
Some ROM's are not running as standalone, they are mostly offset roms based on cm9 examples are slim ics or Clean blank ROM, don't know whether the roms you named are like this.
So, all you need is Odin (or mobile Odin) and a ROM in .tar.md5 format.
I recommend litening rom 3.2 which is fully deodexed and close to stock.
Good luck!
Tapatalked from my Samsung GT9100
Or you can try NEAT. It's stock and has gr8 battery.
I don't think it's the roms... u might do something wrong... follow the steps:
1. Reboot into recovery
2. Factory reset
3. Wipe cache, dalvik, battery stats
4. Install the rom
5. Reboot system
I always do that and never had a problem.
Good luck!
Sent from my awesome SGS2
Karpfenhai said:
Get used to work with Odin, that's all!
Just read, there are so many descriptions out there!
Second, if your phone was delivered with ics (lpd) do not attempt to flash a GB ROM (vr 2.4.2] since it will not work with an ics bootloader!
Some ROM's are not running as standalone, they are mostly offset roms based on cm9 examples are slim ics or Clean blank ROM, don't know whether the roms you named are like this.
So, all you need is Odin (or mobile Odin) and a ROM in .tar.md5 format.
I recommend litening rom 3.2 which is fully deodexed and close to stock.
Good luck!
Tapatalked from my Samsung GT9100
Click to expand...
Click to collapse
IT WORKED! you are my hero now, thanks alot mate !
A good video about ICS Resurrection features
http://galaxys2root.com/galaxy-s2-roms/resurrection-ics-rom-v2-0-for-galaxy-s2-i9100-best-ics-rom/
xxbs said:
IT WORKED! you are my hero now, thanks alot mate !
Click to expand...
Click to collapse
You're welcome
If you really want to save battery, go for phenomenal kernel extreme and use ki3 /ki4 modem, check my sig for bloatware which can be frozen.
Ps: if phenomenal extreme will end up in bootloop, use medium version, best approach, dl them both before flashing extreme
Tapatalked from my Samsung GT9100
Can you give me a link, cause theres too many to choose
right now im in this thread, but dont know what to choose..
http://forum.xda-developers.com/showthread.php?t=1601520
xxbs said:
Can you give me a link, cause theres too many to choose
right now im in this thread, but dont know what to choose..
http://forum.xda-developers.com/showthread.php?t=1601520
Click to expand...
Click to collapse
Just DL 5.5 Medium zip and extreme.zip, go to cwm and flash extreme, if boot stucks, wipe cache and dalvik, if its still not working, go to cwm again and flash medium.
if you DL them to the phone directly, rename it after dl cuz on the phone the name will be phenomenal5.zip in all cases!
If you use odin, dl the .tar files
Not too hard or?
Okay, ill do that, i will use odin.
Thanks again
Edit: It worked with Odin, now im on that kernel, thanks mate, im looking forward to see the battery improvement
xxbs said:
Okay, ill do that, i will use odin.
Thanks again
Edit: It worked with Odin, now im on that kernel, thanks mate, im looking forward to see the battery improvement
Click to expand...
Click to collapse
Great, which one ? extreme ? If yes, lucky you!
For further Battery Improvements, use BBS and post a dump in the desired thread.
Please do not use any benchmarks, they will not give you the best results on this kernel, as long as the phone is smooth, everything is fine!
Yes, extreme one
What do you mean with "use BBS and post a dump in the desired thread." ?
xxbs said:
Yes, extreme one
What do you mean with "use BBS and post a dump in the desired thread." ?
Click to expand...
Click to collapse
Means if you are not happy with your battery life and you want to work out your drainers, use this app and post a dump there --> http://forum.xda-developers.com/showthread.php?t=1179809
regards!
OK, Thanks alot for your time

[Q] Xperia p restarting

Hi everyone
a few days ago i have unlocked the bootloader on my xperia p following the official sony instructions.
After that i downloaded and flashed the sliding xp v5 kernel
Everything worked perfect and i wanted to install a custom rom, and i thought that the vision rom would be perfect.
I installed the vision rom v2 in cwm recovery and everything seemed perfect, i like the rom and everything is good but i have a few problems :-/
First i had the problem that sometimes when the screen locks and turns off,when i press the unlock button the screen wont turn on,i can hear that the phone works when i try to take a ss i hear the soind,but the screen wont turn on until i hard restart the phone :-/
The second problem is that the phone just restarts itself randomly sometimes :-/
And the last thin is that when i go in the dialer to call someone it happebs alot of times that the phone lags a lot there and it happens often that when someobe is calling me or when i call someone that it lags and the phone freezes :-/
Can someone tell me why is this happening,because of the kernel or the rom?
and what should i do to fix it,if possible i would like to keep all the settings which i made because i allready personalized it much....
Thanks to everyone in advance
arnes_king said:
Hi everyone
a few days ago i have unlocked the bootloader on my xperia p following the official sony instructions.
After that i downloaded and flashed the sliding xp v5 kernel
Everything worked perfect and i wanted to install a custom rom, and i thought that the vision rom would be perfect.
I installed the vision rom v2 in cwm recovery and everything seemed perfect, i like the rom and everything is good but i have a few problems :-/
First i had the problem that sometimes when the screen locks and turns off,when i press the unlock button the screen wont turn on,i can hear that the phone works when i try to take a ss i hear the soind,but the screen wont turn on until i hard restart the phone :-/
The second problem is that the phone just restarts itself randomly sometimes :-/
And the last thin is that when i go in the dialer to call someone it happebs alot of times that the phone lags a lot there and it happens often that when someobe is calling me or when i call someone that it lags and the phone freezes :-/
Can someone tell me why is this happening,because of the kernel or the rom?
and what should i do to fix it,if possible i would like to keep all the settings which i made because i allready personalized it much....
Thanks to everyone in advance
Click to expand...
Click to collapse
First that came in my mind is that this kernel and the rom are not for eachother - so try to flash munjeni's kernel and the rom again and try it.
Before that flash stock rom via flash tool to make clean install.
mirost1 said:
First that came in my mind is that this kernel and the rom are not for eachother - so try to flash munjeni's kernel and the rom again and try it.
Before that flash stock rom via flash tool to make clean install.
Click to expand...
Click to collapse
Thanks for your quick reply,right now the internet at my home isn't working so i will have to wait before i try it.
I have never used flashtool before so i want to ask you if anything from my phone will be deleted like apps,contacts or something else?
I have also made a backup using cwm before i installed this rom,would it be ok if i just restore the backup,then flash the new kerbel and after that the vision rom again?
arnes_king said:
Thanks for your quick reply,right now the internet at my home isn't working so i will have to wait before i try it.
I have never used flashtool before so i want to ask you if anything from my phone will be deleted like apps,contacts or something else?
I have also made a backup using cwm before i installed this rom,would it be ok if i just restore the backup,then flash the new kerbel and after that the vision rom again?
Click to expand...
Click to collapse
First of all the flash stock rom you need to put the ftf file in Flashtool/firmwares
Then connect the device in flashmode and flash rom (device switched off and to enter flashmode just do vol- and put usb in).
When flashing official stock rom as much as i know you will lose data, and its better to have clean install.
If you flash munjeni's kernel and the rom you want, and if you restore the back up that will flash the old boot.image too, i mean the old kernel and that is not wanted.
mirost1 said:
First of all the flash stock rom you need to put the ftf file in Flashtool/firmwares
Then connect the device in flashmode and flash rom (device switched off and to enter flashmode just do vol- and put usb in).
When flashing official stock rom as much as i know you will lose data, and its better to have clean install.
If you flash munjeni's kernel and the rom you want, and if you restore the back up that will flash the old boot.image too, i mean the old kernel and that is not wanted.
Click to expand...
Click to collapse
Ok then,thank you again for your help,as soon as my connection is back i will do that and post the results here
As for the kernel, flash tool and stock rom, i can find that all here on xda?
arnes_king said:
Ok then,thank you again for your help,as soon as my connection is back i will do that and post the results here
As for the kernel, flash tool and stock rom, i can find that all here on xda?
Click to expand...
Click to collapse
Yeah buddy, its all in Sola section.

Categories

Resources