Is it possible to make plants vs zombies to play on every lg gt540...
Like weaker version of the game ??
Sry for my bad english
Forget about this thread just use swapper swap on 127 mb and it will work on phone
You need chinfire 3D and 16bit & reduce texture
no you dont ;p
i had only swapp and clocked cpu (864 mhz)
Sent using Lewa
sry for my bad english
smileydr0id said:
no you dont ;p
i had only swapp and clocked cpu (864 mhz)
Sent using Lewa
sry for my bad english
Click to expand...
Click to collapse
Ok, that was version 1.0 BTW on the GT540 using swiftdroid RC1
Ow rc1 the good old times
bs828 said:
Ow rc1 the good old times
Click to expand...
Click to collapse
but still Swiftdroid M5 was the best in its series
Dunno about SDSL
I've played it with no problem!
I tried everything to make this work but it didn't succed, tried on both SDSL and CM7 by tejas and it was crashing at the loading screen all the time. Nothing helped, including swap and chainfire with nvidia plug / 16bit textures.
Did you try to Oc your phone ?
Well actually it was oced all the time, 768 mhz on CM7 by tejas and 806 mhz on SDSL. I believe it's memory managament fault not the cpu frequency anyway, pvz itself doesn't have any high requirements when it comes to hardware, it's just that the game is poorly optimized and it can't manage memory by itself. And as far i know it requires a lot of free memory to be launched ( near 200 mb ) otherwise it crashes. I just don't understand why it does work for some people and for other it doesn't, basically it shouldn't work on any GT540 because it lacks physical memory ( 168 mb when 80-110 mb is available for the user depending on the rom ) and swap is nothing like physical memory, it's just a paging file used to keep data that isn't needed.
Please tell me how to creat swap on my phone ? i installed swapper and i don't know how to make it work
http://forum.xda-developers.com/showthread.php?t=1317362 :good:
Plants Vs zombies only work with some ROMs don't know why.... testing I discovered that on my phone it works with Miroslav's ICS, JB and AOSP 1.2
Varrasco said:
Plants Vs zombies only work with some ROMs don't know why.... testing I discovered that on my phone it works with Miroslav's ICS, JB and AOSP 1.2
Click to expand...
Click to collapse
It works on any rom with swap if you cant run it at all i would recommend you to download chainfire aplication and put custom settings for it and powervr driver
I tried with sdsl 3 that has swap and it didn't work. But that's with my phone...
try b3 by tejas with swap
Related
I tried asking this in the Megatron-thread but as usual, no answers...
I am a little worried about keeping my phone overclocked at all times, so I was thinking about downloading SetCPU and switching between 600 and 700 via that app. But my question is this: Megatron ROM overclocks the phone by default. If I download a 3rd-party app to overclock/underclock the phone, will this mess up the whole system?
Anyone? Would really appreciate help!
i've been using megatron & setcpu together for the past month.. no issues yet, so cant promise ma phone wont go up in flames i clock extra if needed
Ok, thanks!
My Experience: USing LOL rom with default OC gave me kernel panics ...so instead i disabled OC in ROm and wud then OC using SetCPu...ALso I dont know why but touch feels a lot more smoother on LOL rom with the lag fix than megatron....so i switched from megatron to LOL...Currently even with maxCPu 480Mhz and conservative profile..touch is very smooth on LOL
sarfaraz1989 said:
My Experience: USing LOL rom with default OC gave me kernel panics ...so instead i disabled OC in ROm and wud then OC using SetCPu...ALso I dont know why but touch feels a lot more smoother on LOL rom with the lag fix than megatron....so i switched from megatron to LOL...Currently even with maxCPu 480Mhz and conservative profile..touch is very smooth on LOL
Click to expand...
Click to collapse
How do I disable the OC in Megatron? By adding the "minitron" file and then using SetCPU?
Hi all,
I'm a newbie in Android world. Successfully flashed my O1 to Megatron v1. Afterwhich I tried installing SetCPU to it and overclock to 806mhz & above. However, after overclocking with SetCPU, the whole phone's performance became more sluggish than the original Megatron 729mhz...
Someone please advise me on how to overcome this and make the phone speedier with high frequency.
Is there a way to edit some of Megatron's kernel to make it 806mhz on default even without using SetCPU?
Don't use set on boot feature, it will make ur phone get stock on bootloop...
So can someone tell me how to proceed with this? I want to be able to change between 600 and 700, when I please. Thanks
ccdreadcc said:
Don't use set on boot feature, it will make ur phone get stock on bootloop...
Click to expand...
Click to collapse
Got it! Tried last night without set on boot feature. Working fine with 806mhz and speedier than 729mhz. However my chipset refuses to go into higher frequency without freezing and rebooting... Is it due to my microsd card? I'm still using the original 2gb microsd card tt came together with the O1... Will changing to a class 6 or higher microsd card let me clock higher? or my chipset is just lemon at 806mhz?
FnH84 said:
So can someone tell me how to proceed with this? I want to be able to change between 600 and 700, when I please. Thanks
Click to expand...
Click to collapse
FnH84: I downloaded SetCPU from XDA forum and can tweak the frequency between 600 & 700 by myself. Even can set profiles to govern the speed at different situations.
taeivon said:
However my chipset refuses to go into higher frequency without freezing and rebooting... Is it due to my microsd card?
Click to expand...
Click to collapse
You are already pushing the CPU to its limit with that 806 MHz frequency. Do you even realize is 34% above the designed specs for this CPU? You're already lucky enough you got it stable at 806, and no SD card will ever make a difference, they're not related.
How come Samsung Galaxy Mini running on the same chipset offer 800Mhz as stock???
Man, I don't know! How come the same "Pentium IV" processor could come in speeds from 1.3 GHz to 3.8 GHz?
Can any of you actually believe that LG would underclock an 800 MHz CPU and sell it to us as a 600 MHz instead of letting it run at its best?
Galaxy Mini is obviously using a CPU designed to run at 800 MHz, even though it bears the same name. And that one can probably be overclocked to above 1 GHz.
masteryx said:
You are already pushing the CPU to its limit with that 806 MHz frequency. Do you even realize is 34% above the designed specs for this CPU? You're already lucky enough you got it stable at 806, and no SD card will ever make a difference, they're not related.
Click to expand...
Click to collapse
Thanks for your reply. I was thinking bout the same as the other guy, that galaxy ace can run at 800mhz, and why not O1.
Hmm... Isn't there any other ways to push the frequency higher? Maybe supply more voltage to the core? I dont mind sacrificing batt life, I just wanna try ways to push it to the max~~
Has anyone tried this game yet?
Is it working or no?
Minimum Requirements:
512 MB RAM (256 free at runtime)
GPU capable of OpenGL ES 2.0
Android 2.1
800 Mhz CPU or greater recommended
SD card with at least 600 MB free storage
It's on Unreal 3, this phone can't get full speed on "HD" games, and you want to run this game
JoHnNy08PL said:
Minimum Requirements:
512 MB RAM (256 free at runtime)
GPU capable of OpenGL ES 2.0
Android 2.1
800 Mhz CPU or greater recommended
SD card with at least 600 MB free storage
It's on Unreal 3, this phone can't get full speed on "HD" games, and you want to run this game
Click to expand...
Click to collapse
Would there be any help if I use ChainFire 3D?
[email protected] said:
Would there be any help if I use ChainFire 3D?
Click to expand...
Click to collapse
The game is too advanced. It doesn't even work on the sgs2 properly.
Sent from my GT-I5800 using XDA App
yea i tink dis game is too advanced for our phone even overclocked and with cf3d enabled...
Well, that certainly is disappointing....
I have
CyanogenMod 7.2 KANG latest version
min 480 mhz
max 806 mhz
so can i run it? please reply to me
If u like laggy football..you can try...mostly it wont work...if it will..it will lag...
There are a few ports that make it faster....GIYF
I run it smooth on 480-806MHz with Chainfire 3d and nividia drivers
(I know that chainfire 3d is for 1GHz phones but it improves my gaming performance anyway!)
can i?
King ACE said:
If u like laggy football..you can try...mostly it wont work...if it will..it will lag...
Click to expand...
Click to collapse
can i somehow disable the lag ?
UltimateHack3r said:
can i somehow disable the lag ?
Click to expand...
Click to collapse
unfortunately not
Set the CPU to Max 800 Min 800 gernovor performance
Chainfire 3d with nvidia..
I also work on temple run
i play this game before without lag . cm7
Moderators, please close/hide/delete this thread, as we have to create new one in the future, this just breaking some rules, thanks to wedgess for information.
KERNEL VERSIONS
Nominal
720P Recording
1.6GHz Max Clock
4MB VRAM
383MB Available Ram
Stock GPU Clock (245 MHz)
Balance
480P Recording
2GHz Max Clock
6MB VRAM
400MB Available Ram
Stock GPU Clock (245 MHz)
Fast
480P Recording
2GHz Max Clock
8MB VRAM
398MB Available Ram
Overclocked GPU (260MHz)
Extreme
No Camera Features
2.3GHz Max Clock
8MB VRAM
429MB Available Ram
Overclocked GPU (265 MHz )
Eagerly awaiting the R800x GB version! Thanks much for your efforts!
Are this for hardcore gamers???
There will be correct version which fits DiXperia Perennial in the future .
Sent from my Xperia X10i using xda premium
Can't wait for jb version and would it be possible to disable als from the kernel level because it causes me lots of problems. If it isn't too much trouble please make version disabling als. Thanks
Sent from my Xperia Play (r800x)
extremetempz said:
KERNEL VERSIONS
Nominal
720P Recording
1.6GHz Max Clock
4MB VRAM
383MB Available Ram
Stock GPU Clock (245 MHz)
Balance
480P Recording
2GHz Max Clock
6MB VRAM
395MB Available Ram
Stock GPU Clock (245 MHz)
Extreme
No Camera Features
2.3GHz Max Clock
8MB VRAM
419MB Available Ram
Overclocked GPU (260 MHz )
Click to expand...
Click to collapse
Is it possible to get say Extreme with 420p recording? I know it would lose some of its RAM... just curious. The thoguht of 8mb vram and gpu OC to 260mhz sounds appealing to me. But I would like to have 420p camera. If not I totally understand. Just curious is all
Saw the FAST options added. Oh man.... just made my day. Awesome. Just to clarify/confirm there will be different version for GB & ICS/JB correct?
Sent from my R800i using xda premium
ozzmanj1 said:
Saw the FAST options added. Oh man.... just made my day. Awesome. Just to clarify/confirm there will be different version for GB & ICS/JB correct?
Sent from my R800i using xda premium
Click to expand...
Click to collapse
eventually there will be but for now I'm polishing off gingerbread
i m only posting here cause of this: is really safe OC at 2.3ghz? i have a feeling many chips gonna be burned..as Doomlord himself said on Doomkernel thread,its more safe using cpu near to default..and he doesnt recommend using cpu above 1.6..wedgess and cosmic dan same opinions..so i think it would be good for all, a release with a bit more juice on GPU..mostly on ICS we need a boost. on GB with adrenobooster we already have an amazing result on roms and daily use. 1ghz--»2.3 seems..xtreme.
just my 2 cents beeing carefull..anyway great work,highly appreciated..and a little question: are JB kernel being thought?:good:
That was Justin's decision - you can always flash Extreme version and use 1.6GHz frequency . If you want my opinion about this, check DiXperia thread where I post my few words of using right frequency with right profile etc.
For example, my XPlay could reach 1.9GHz max, sometimes 2.0, but never more. Some devices, like Justin's Play, working on 2.3GHz better than 2.1, cause of voltages for each frequency .
i totally agree with you..but cutting a bit more frequencies it would not be bad at all..i ve said that on other thread, as i has a xtreme OC on desktop pc..i always be carefull, cause some chips yeh..they handle it..in same cpu/gpu series,same can do it nicely (always short time using) others cant..on long term result they might cause some graphics glithces,cpu faulty and so on..but it always depend on users choice to OC or not,cause a phone doesnt have a refrigeration system as pc can have to reduce temperatures and avoid burning chip.
More than the CPU, the GPU overclock seems really unsafe: doom has tried it still 2 years ago into one version of his kernel (I don't remember which release) and it only gives problem (if I remember correct one guy hasd his play death after some test), maybe is better to ask to doom some more information (he is busy with other devices but I think that he would reply with some more details)
Sent from my Nexus 7 using Tapatalk 4 Beta
[email protected] said:
More than the CPU, the GPU overclock seems really unsafe: doom has tried it still 2 years ago into one version of his kernel (I don't remember which release) and it only gives problem (if I remember correct one guy hasd his play death after some test), maybe is better to ask to doom some more information (he is busy with other devices but I think that he would reply with some more details)
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I agree with the GPU overclock thing and it was v13 he had it ,then he removed it and made v14, So @extremetempz i think you should PM DoomLord and ask!
Pizza_Dox said:
I agree with the GPU overclock thing and it was v13 he had it ,then he removed it and made v14, So @extremetempz i think you should PM DoomLord and ask!
Click to expand...
Click to collapse
and ask him wich clock he used..250 i think it would not be harmful..but Doomlord can say better at wich clocks did he use both GPU/CPU.
i remember to read that one guy also burned his play with 2.0ghz..cant remember wich version of Doomlord kernel,.heated so much that board died.:crying: of course always users choice and fault..cant have a fiat punto racing like a ferrari.
smokerman said:
and ask him wich clock he used..250 i think it would not be harmful..but Doomlord can say better at wich clocks did he use both GPU/CPU.
i remember to read that one guy also burned his play with 2.0ghz..cant remember wich version of Doomlord kernel,.heated so much that board died.:crying: of course always users choice and fault..cant have a fiat punto racing like a ferrari.
Click to expand...
Click to collapse
I have a gilera runner pm tuning,pro street 3!!!
Sent from my R800i using xda app-developers app
Good
This looks very good! Very promising , can't wait to give the monster 2.3ghz a try ) . Anyway good luck with this !
How much ram would removing the 3g function give?
Spatinator said:
How much ram would removing the 3g function give?
Click to expand...
Click to collapse
(correct me if im wrong) i think 3G and Data dosent have a Ram Partition,
Pizza_Dox said:
(correct me if im wrong) i think 3G and Data dosent have a Ram Partition,
Click to expand...
Click to collapse
Ha i don't know it either
I have a samsung galaxy young s6312, stock android 4.1.2, rooted. Now Subway surfers and temple run oz games are NOT playable on my device, they lag so much. I tried setcpu to overclock, but the problem remains. Does anyone here have this problem, and does anyone have any suggestions on how to solve it??
P. S. I have a 1 GHz processor and a 768 MB ram (although 665 MB is available for use)
mayank06199 said:
I have a samsung galaxy young s6312, stock android 4.1.2, rooted. Now Subway surfers and temple run oz games are NOT playable on my device, they lag so much. I tried setcpu to overclock, but the problem remains. Does anyone here have this problem, and does anyone have any suggestions on how to solve it??
P. S. I have a 1 GHz processor and a 768 MB ram (although 665 MB is available for use)
Click to expand...
Click to collapse
try chainfire 3d
Actually I have seen many times that chainfire 3d has bricked up many phones. I don't want to brick my phone just for playing a game. I would appreciate a safer solution. Thanks though...
mayank06199 said:
Actually I have seen many times that chainfire 3d has bricked up many phones. I don't want to brick my phone just for playing a game. I would appreciate a safer solution. Thanks though...
Click to expand...
Click to collapse
try a different kernel and in set cpu set your governor for performance
try swap for increasing ram
but remember it will decrease the life of your ext memory a little
other than these two I don't know anything
Not recommended for chanfire 3D because it will soft brick on jellybean rom
Sent from my HTC Sensation using XDA Premium 4 mobile app