I tried to flash the tango test rom but the only thing have been flashed is the SPL to the version 3.10.175005.0 and now i can't downgrade, not if the goldcard method worked and the sspl gives the model id problem.
i need some help to try downgrade my spl.
(sorry for my bad english)
Related
i upgrade the ROM using this :
http://forum.xda-developers.com/showthread.php?t=283965
but I would like to downgrade it again to send for repair ...
i cannot flash it back to the original IMATE JAMIN rom , always stop at 95%.
Please help.
Just wait, suddently it continue.
Regards
"Just wait, suddently it continue."
No, it doesnt. Error msg comes out and forces you to it.
SPL can not be easily downgrade by flashing ROM in a G4.
Same problem
I have same similar problem.
I created new topic. I guess my topic more explanatory.
Lets go on here -> http://forum.xda-developers.com/showthread.php?t=331474
thanks..
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
nForce said:
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
Click to expand...
Click to collapse
When you first flashed HardSPL, which verson of the SPL was shown after reboot? That, what you had before, or the new one, of the HardSPL? I am asking, because I managed to keep the original O2 2.15 SPL and I really dont want to channge it (for repair reasons
After flashing the patched HardSPL I see 2.G4.4PDA (I have a G4 XDA Neo)! But the good news are that you now can flash all SPL versions you want, like the original 2.15 when it's inside of your ROM image and you can see it after rebooting!
How to use Hard SPL if a can't pass bootloader?
I tryed hard SPL, but after upgrading it back to 2.20.001., and I can't pass even to "Windows mobile" screen and it is frozen this position.
Any suggestions?
Thanks
Hello,
I have a SPV M3100 and I upgraded to WM6. I flashed the spl and radio and followed the upgrade guide...
I want to put back my old spl and radio so I can send it back to Orange.
Before I had:
SPL: 1.04
Radio: 1.06.00.00
OS: Orange UK ROM
Now I have:
SPL: 1.40olipro
Radio: 1.38
OS: Orange UK ROM
The Orange UK ROM I used was the Reconstructed one here:
http://forum.xda-developers.com/show...=278060&page=3
Stupidly, to put back everything I flashed spl 1.10.oli then flashed the full ROM but kept getting noGSM and then getting stuck in boot.
To get it working I had to upgrade to spl 1.40olipro again and flash radio 1.38...
I then extracted the radio from the ROM (as its the one I need) and tried flashing it with that but still had same noGSM error.
How can I get 1.06.00.00??? on the WIKI 1.06 is unavailable (which is why I extracted it from the ROM)
In the 'Standard Method' here: http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
it says... "Your device MUST be running bootloader version 1.04 to upgrade the radio with these:"
Can anyone advice me on this??? I do need SPL1.04 anyway as thats what orange shipped with my phone...
I dont know where to get SPL1.04 and is it correct that radio 1.06 can only be flashed on SPL1.04 and thats why im getting noGSM when I do it???
Thanks Everyone, these forums are great, after thinking I bricked my phone yesturday (flashing the full UK Orange ROM) and getting noGSM it is now fixed
P.S.
If I trust the stuff in the Full Orange ROM I used.... I extracted the SPL too which says its 1.04.
I want to try flashing SPL 1.04 first then the radio, but been advised not to? Everyone says flash SPL last! But I dont see how if it says: "Your device MUST be running bootloader version 1.04 to upgrade the radio with these:"
The problem you are having is that radio 1.38.x.x will have flashed the updated Radio bootloader to HTC_BOOT 108.
Reflashing 1.06.0.0 will not downgrade the bootloader to the required 107, and afaik there currently is no way to downgrade the radio BL.
You should still be able to use the Orange ROM with the updated radio, and if you have to do a orange warranty call, it's unlikely they will complain.
@dlfranks: Read here:
http://forum.xda-developers.com/showthread.php?t=286755&?p=1217676&postcount=1007
@oliber: he's wanting to go to a radio with htc_boot 0106, probably that's not possible when you've already flashed 0108. I never tried this, but it seems that two users are having the same issue, so probably once you have 0108 you can only downgrade to radios with 0107 (but keeping 0108 on your phone, that is).
thanks
thanks guys, that makes sense. I think ill try the other radio. basicly i have only had it a few days and want to try a difo phone, there happy to swap it in the first 7 days... i just dont want them complaining i messed around with it...
want to make it look as much untampered with as poss!!
at least i got the orange rom on there, it looks good.
if i get the radio to the lowest one i can, how do i go about getting spl1.04 back on my phone. i have read the hard spl threads but cant work it out. i have 1.40olipro. do i downgrade to 1.10.oli then to 1.04? or to 1.06 then 1.04. what order?
I extracted the spl1.04 rom the orange rom i used...
thanks for your help again
dlfranks said:
how do i go about getting spl1.04 back on my phone. i have read the hard spl threads but cant work it out. i have 1.40olipro. do i downgrade to 1.10.oli then to 1.04? or to 1.06 then 1.04. what order?
Click to expand...
Click to collapse
first flash HardSPL-1.10, then flash 1.04. Never go to 1.06.
I have updated my phone x01ht WM5 to custom WM6 firmware,
before installing the wm6, i had install the Hard_SPL-V7
i wanna know, if i want to flash again to other wm5 roms, how could i do?
because when i was trying to flash the wm5 dopod rom (it loads the loader) but stop flashing, error said USB connection failed..
any advise pls reply, thanks... i am very noob at this level
Follow THIS guide. You will be able to downgrade to WM5 again but it is not as simple as running the RUU.
(pof im adding the warning dont worry)
My dopod 838pro now in IPL 1.04 SPL 1.40olipro
i can`t flash any rom
now in tricolour screen
what rom can i flash ???
pls help me...
If you've installed hardspl, flash to any ROM; if not, flash to your original carrier's ROM.
Sounds like kennychannel has simunlocked his Hermes after Hard SPL was installed. Thats why he has spl - 1.40. Do as kareem9nba says then either supercid your phone or reinstall Hard SPL....
Long story short, i was working on a new bootloader for HD2 and was testing the functioning of smem and my memory binaries, they seem good but i chose the wrong address to test them on. The address i picked was 0x0000219 which is actually the SPL partition. Now call it my luck or whatever, the only thing i damaged was the HTC logo during flash. So i've decided to flash a stock ROM through sdcard to replace SPL and also fix bad blocks which have developed after countless hours of developing and testing and flashing on HD2, Before i go on and update to an official SPL (ofc im running 2.08HSPL to be able to include a custom compiled ARM binary)
As i've read in some posts, once i upgrade to an OSPL (official) > 2 i will never be able to downgrade, no matter what. The stock SPL which came in with my device was 1.66 and i flashed 2.08HSPL to it.
1) What SPL is included in the official 3.14 WM6.5 ROM ?
2) Will i be able to downgrade to like 1.66 (My Stock) or install 2.08HSPL with it ? and if yes then how ?
I write here cause, i don't want to join the "Bricked my phone" club
I'm not sure about downgrading to 1.66, since I use TMOUS, but returning to HSPL shouldn't be a problem. The newer HSPL4 installer reads as follows:
1) To install this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
I've repeatedly switched between 2.10.0000 and 2.08.HSPL with no problems.
BTW, I'm suffering from bad block problems and reverting to stock by SD method did nothing to fix mine. If you figure out a better way I'd love to hear it!
1) 2.08-2.10 for EU and 3.03 on TMOUS.
2) Yes, using HSPL4 you'll be able to downgrade and flash HSPL from official SPL's
Kefir.net said:
1) 2.08-2.10 for EU and 3.03 on TMOUS.
2) Yes, using HSPL4 you'll be able to downgrade and flash HSPL from official SPL's
Click to expand...
Click to collapse
Wrong, there are NO EU roms that use 2.x spl. The EU spl path jumped from 1.66.0000 to 3.03.0000
Only tmous stock roms use spl 2.x
@op, ,,
1 3.03.0000
2 yes
Yes, Sam is quite correct!
samsamuel said:
Wrong, there are NO EU roms that use 2.x spl. The EU spl path jumped from 1.66.0000 to 3.03.0000
Only tmous stock roms use spl 2.x
@op, ,,
1 3.03.0000
2 yes
Click to expand...
Click to collapse
Also, just to clarify, the current stock SPL for tmo is 3.03, so if you're flashing stock for RMA or something like that on you're on tmo you can flash the 3.14 ROM with 3.03 SPL and be fine.
For Android/WP7 to function, you must be on HSPL 2.08