ok you have to usb surf to get build 30 to charge the first time.
Download current widget. It will tell you how much you are drawing from the port vs battery.
once you have it up and running plug in the TP into a pc. Watch for the current draw to drop to 400ma or less. This means its sucking some power from the usb port, and from the battery. Once its sucking juice from the usb port unplug the cable and wait for the current draw to pop back up to 650-900ma. Then plug in the charger. It should start sucking over an amp, and the lightning bolt on the current widget should turn green.
I thought it was just me. I went back to the cm9 nightlies.
Sent from my cm_tenderloin using XDA
Hm...mine seems to be charging fine, but I'm only using a motorola charger at the moment so no faster charge.
I was using the HP charger that came with it. I plugged it in last night like usual with the screen and wifi off. It was still at 0% this morning.
EDIT: Hmm,I may have just let mine discharge too much. I did run it all the way down. In another thread, I found this:
"If you let it drain that much, you MUST use the provided adapters and start the charge process within WebOS. It's a bug that exists where when you let it drain too much, it sets the charge level to Trickle Charge (to help prevent damage to the charge circuits and battery). So, boot it with the provided charger (Touchstone or the charge plug and cord that came with the box) into WebOS and let it power-charge that way, and you're set. Once it's charged to about a quarter, you're good to go back to Android and charge fast from there." --ve6ay
http://forum.xda-developers.com/showpost.php?p=24357376&postcount=15
Related
(Be nice!)
My Streak is only 3 days old and I am thrilled with it but .....
Last night I shut it off and put it on the wall charger as usual at bedtime. It had about 80% charge left and had been working fine all day.
When I got up this morning and tried to turn the phone on, it said "0% Charge" and shut itself off. I had it on my cigarette lighter/usb charger in the car on the way to work (1 hour) and it still said 0% charge. I have had it on charge from the usb on my desktop computer in the office for 1-1/2 hours now and it says 20% charge.
When the phone is shut off, what the heck could discharge the battery completely in 6 hours????? Could the charger be bad and drawing current from the battery? (Shouldn't happen - poor design if it did!)
If it is REALLY sensitive to input voltage, maybe the USB charger in my car isn't high enough to charge the Dell? (I have seen some usb devices that actually want 5.1 to 5.2 volts to charge.)
Anyway, it is slowly coming up but I need to figure out what killed it over night. Has anybody else had this happen????
Dianne
(40 years an electronic tech and just joined The Cell Phone Age LOL!)
Did you fully shut-down your streak, or just turn-off the screen? There is circuitry that stops the battery from charging once a full charge is reached, as over charging will ruin the battery. So the phone should be on while charging. Another thought... Will it even charge if it's not on?
P.S. the thread title does leave some room for jokes
Yes, the phone will charge while it is powered off.
Your car charger may not have the power needed. I have seen a few posts about the car chargers.
Something does not seem right. While on the wall charger it should have been at 100 percent.
Also, my phone will charge fully in 2 hours on the wall charger, not sure of the time on USB.
Sent from my Dell Streak using XDA App
[email protected] dc can charge a hungry streak to full power in 2 hour.
It'll take about 3 H if you are using [email protected]
Sent from my Dell Streak using XDA App
Getting stranger!
After two incidents where the phone SHOULD have charged over night but was dead or nearly dead in the morning, I plan to switch to a USB charger that I KNOW is good but .....
When I tried to power up the Streak this morning (after being shut off last night and left on the charger over night) it was TOTALLY dead - didn't even light up again when I plugged it back into the charger! - so I stuffed it in my pocket until I got to work.
I popped the battery out and measured it - no-load voltage showed 4.0 Volts. When I put the battery back in, the Streak booted fine and showed 100% charge! (It was not battery contacts - I cleaned them a few days ago after the no-charge incident).
It appears that there may be something in battery-backed memory that got out of whack and removing/replacing the battery cleared the error state allowing the Streak to boot. This could tie in with the apparent charging problem?
Any ideas?
It was working fine before I went to bed last night, then I let it charge for the night since that battery was at about 4%, But this morning it won't turn on at all. The battery feels warm as if its been charging but nothing seems to be making it turn on. Any ideas?
re: No Poweron
labou_7 said:
It was working fine before I went to bed last night, then I let it charge for the night since that battery was at about 4%, But this morning it won't turn on at all. The battery feels warm as if its been charging but nothing seems to be making turn on. Any ideas?
Click to expand...
Click to collapse
If it was my phone here is what I would do.
First I would see if the phone charges the battery by putting the battery into
the phone and plug the usb cable from phone into the wall charger or into
the computer.
If the display on phone shows a picture of a battery charging let it charge
for an hour more or less and try turning on the phone.
If the phone is not charging the battery I would purchase a cheapy battery
charger and battery combo on eBay.
You can find this combo on eBay for less than $8 bucks shipped for both the battery and charger:
http://www.ebay.com/itm/1800m-BATTE...045605?pt=PDA_Accessories&hash=item43aa9a4465
(even if you decide to return and exchange the phone its still a good thing to have a spare battery and charger)
Check it out.
Good Luck!
labou_7 said:
It was working fine before I went to bed last night, then I let it charge for the night since that battery was at about 4%, But this morning it won't turn on at all. The battery feels warm as if its been charging but nothing seems to be making it turn on. Any ideas?
Click to expand...
Click to collapse
are you on cm7? not sure about the s2 (never had the issue), but i know that on the infuse, there was a problem (or maybe it was intentional) with low power charging mode (phone wouldn't charge when off).
i think this can be solved by trying to charge the phone via your computer usb, as opposed to your OEM wall charger.
Thanks for the suggestion. It definitely isn't showing the picture of the battery when its plugged in to the wall or the computer. I'm debating the battery charger combo you linked.
I actually am. But I have it plugged to my computer and nothings changed.
Time for some trouble shooting.
Start eliminating possibilities. You need to determine where the problem is.
From what you say, it seems possible that the battery is completely discharged but not recharging. That could be a bad battery or it could be the phone.
If you know someone else with an SGS II, try inserting their battery temporarily to see if your phone will boot. If you don't know someone else, maybe you can borrow a charged battery from the store where you bought it.
Continue on until you pinpoint the problem.
Do NOT buy a "cheapie" battery for your SGS2. Unless you want to eisk causing damage. The stock battery for the SGS2 has NFC technology built into it. Using anything other than OEM could cause damage/performance issues to your phone, and void the warranty.
Sent from my SAMSUNG-SGH-I777 using XDA Premium App
Have goh tried a battery pull? Unplug the phone, pull the battery and let sit for a few minutes to allow tbe IC's to discharge. Put battery back in and try powering up the device. Good luck.
Sent from my SAMSUNG-SGH-I777 using XDA Premium App
Similar issue and got phone fixed finally
Have had similar issue as yours. Cable charger was plugged into the phone to be charged at night and was surprised to find that the phone became hot and battery was not charged at the next morning, in fact the battery level got lower than it was before charging.
Notes:
- ROM in use: AOCP version 7.2 (Android 4.4.2)
- Kernel in use: Version 3.0.101 [email protected] #3
Here are some tests done and the observations after getting a charger with a slot to place the removed battery for charging:
1. Charging via USB cable connected to PC:
- With the phone turned on, battery charging icon is only displayed after some wiggling at the charging port. The phone got charged further to 100% when the initial remaining battery level is 90%. However, when the initial battery level was less than 50%, the battery level continued dropping ALTHOUGH the battery charging icon was displayed.
- With the phone turned off, battery charging icon is only displayed after some wiggling at the charging port. When the initial battery level was less than 50%, the battery charging icon displayed only a battery level of 1% and the battery level did not increase at all after 15 minutes of charging.
Initially suspected that it was a dead battery issue and bought an i9100 battery, I thought it was a compatible battery at first. With the i9100 battery, I repeated the above tests.
2. Charging via USB cable connected to PC:
- With the phone turned on, battery charging icon is only displayed after some wiggling at the charging port. The phone got charged further to 100% when the initial remaining battery level is 90%. However, when the initial battery level was less than 50%, the battery level continued dropping ALTHOUGH the battery charging icon was displayed.
- With the phone turned off, battery charging icon is NOT displayed but the phone screen flashed continuously, and at times the phone is turned on automatically as the USB charging port is inserted. When the phone is turned on, the charging proceeded as the above sentence.
Upon searching the forum, I found that i777 has a different battery with NFC chip and i9100 battery has reported to cause issues during charging on i777 devices. There was also a Chinese forum which mentioned that the battery compatibility issues should have been overcome in ROM with Android version 4.0 and above.
I then bought a new i777 compatible battery and tested charging via USB cable. The observations are same as the first battery as at 1.
With the battery issues possibility eliminated, I approached a phone technician to examine the phone by telling him that the phone couldn't be charged and the battery level continued dropping even with the battery charging icon displayed. The phone technician then thought that the USB charging port to be the cause of the charging issue and replaced it. The replaced part is the small metal housing where the USB cable is inserted, and is replaced by heating the old metal housing and replacing it with new part by soldering.
The phone could be charged with USB cable as usual after the part replacement and all the batteries are found to be still working fine. Ended up with 2 i777 batteries and a i9100 battery, may be I could continue using this phone for at least another 5 years down the road.
Okay so I've this problem where my battery discharges while charging!
I had this problem since wednesday that time I was on stock... So I thought flashing a custom ROM now as of now i'm on SonyStyle still the same problem,
let me elaborate my problem a bit more
-To monitor how much current is discharging n charging! -498 mA while discharging n -298 mA while charging it normally
-So next thing I tried is to charge it while being switched off, most of the times it wont charge n when it'll charge it'll reach some point n starts discharging! Discharging even when its off and plugged to the charger! BIZZARE isnt it?
-Now in order to put it on chrging i've to reboot it couple of times untill battery monitor widget shows +current... N when it reaches 100 it'll begin to discharge like it'll be empty in 1nhalf hour
-ALSO I'VE TURNED OFF ANYTHING THAT SUCKS BATTERY! AND I'M NOT USING MY DEVICE WHILE CHARGING! ALSO IT DISCHARGES WHILE BEING ON CHARGER IN A switched off state.
these things i've already tried
-Flashing custom ROM
-Putting my cell on powersave CPU governor
-undervolting
-charging using USB
-CUSTOMER CARE CENTRE only resets the software
I'M SO FRUSTRATED THAT I'LL BURN THIS CELL INTO ASHES! Anybody help me before I kill thislil fellow!
You might try resetting your battery stats on clockworkmod or xrecovery. Charge until 100% and let it discharge naturally to switch off, allow a few days of charge cycling and it should be ok.
Lipoly batteries dont trickle charge. If you leave your phone on charge for 8 hours it will just switch off the charger, discharge for awhile and then switch back on the charger. Most take 1 to 1.5 hours to charge, so if you leave it plugged in you will be charging/discharging about 6 times in that period. Lipoly have a limited number of charges before they diminish, usually about 500. So if you leave it plugged in you can reduce your battery life span considerably - otherwise it should last a good year and a half before it wears out.
Dont ever try to trickle charge, overcharge or manually discharge a lipoly battery as they have a tendancy to explode.
The good news is lipoly batteries are cheap to manufacture. You should be able to pick up a decent bst-38 (or substitute) on ebay/amazon for around 15-20 euros. Dont be hoodwinked into the 2000mAh batteries, most are fake. My 970mAh can last 2 days on Gintonic rom.
Sent from my U20i using Tapatalk
I had a similar problem with the battery discharging whilst charging.
For me the problem turned out to be my USB cable becoming faulty. It would still transfer data when connected to a computer, but would get a similar problem to the one you describe when charging. Might not be the same problem for you though.
I am now experiencing this problem. I think it is my usb cable too. Will buy another 1 soon. It discharges then charges again when I pull out the cable and plug it in again.
Sent from my U20i using xda premium
Well already tried wiping battery stats
heres what I've discovered till now
-The charge current drops as if the battery is at 91% but it isnt even close
-It is either the battery is sending wrong data to charger, or it is faulty
-Not able to explain how n why it discharges even a switched off state???
-Only solution I can think is a charging dock for BST-38
obsidian_eclipse said:
You might try resetting your battery stats on clockworkmod or xrecovery. Charge until 100% and let it discharge naturally to switch off, allow a few days of charge cycling and it should be ok.
Lipoly batteries dont trickle charge. If you leave your phone on charge for 8 hours it will just switch off the charger, discharge for awhile and then switch back on the charger. Most take 1 to 1.5 hours to charge, so if you leave it plugged in you will be charging/discharging about 6 times in that period. Lipoly have a limited number of charges before they diminish, usually about 500. So if you leave it plugged in you can reduce your battery life span considerably - otherwise it should last a good year and a half before it wears out.
Dont ever try to trickle charge, overcharge or manually discharge a lipoly battery as they have a tendancy to explode.
The good news is lipoly batteries are cheap to manufacture. You should be able to pick up a decent bst-38 (or substitute) on ebay/amazon for around 15-20 euros. Dont be hoodwinked into the 2000mAh batteries, most are fake. My 970mAh can last 2 days on Gintonic rom.
Sent from my U20i using Tapatalk
Click to expand...
Click to collapse
If I leave my cell on charging for 8 hours, then after 8 hours my battery will be zero... It'll keep blinking the red light for hour or more... See thats a wicked problem...
happened to me also, had to use a better cable (don't use thin and/or long cables)
Yeah I tried with a Nokia made cable and its charging flawlessly! This is my first time with a Non-Nokia n so far the experience is not very good!
btw thanxxx a lot for your attention n concern!
- similar (identical) problem, tried similar resolutions (factory reset/sdcard/sim removing/different chargers/battery replacement)
- disassemble my phone... and found out, that micro usb connector replacement is unrealistic.
- watched charge/discharge/voltage/current/temperature process trough battery monitor widget (1 minute sampling)..
- re-calibrated battery many times
RESOLUTION : micro usb connector or connections in mobo is dead. I build charger with current meter. No matter, what says my phone about charging (pluged in - discharging)- any information displayed delays for minutes on phone. IF my external current meter says - "charging", than phone state is "CHARGING" independent from what phone is displaying at the moment. Moving usb charging connector in phone causes current to stop flying to phone or reducing current value. Phone still says "plugged in" and or "charging" on "discharging"...
Temporary resolution: little pushing/deformation on charging connector (male) and LED in charging chain, witch is displaying - charging or not. Every time connecting charger i'm looking on indicator LED and moving charge connector, till LED says "charging" and then no more any moves on phone.
Future resolution: contact-less charging trough inductive coupling
Hi as stated my question is NOT to know how many of you experience charging that takes too long, but is there a SOLUTION for it?
I am using a desire s, it used to take 2hours 30min(from 15%-100%) but now a days it takes close to 5 hours to fully charge.
I've read many thread with similar problem but non seem to be able to find the solution.
I doubt it is battery related issue as i got this phone together with my friends and theirs has no issue like this.
I've tried :
1)full wipe
2)different rom(s)
3)different kernel
4)battery stat wipe
5)different charger(both are htc)
ps : I've post this in DesireS Q&A but did not get any solution.
How are you charging your phone: USB to PC it via wall charger? If it's taking longer than usual turn off the phone. I've found that this sped up the charge dramatically! By doing so, you can also see a battery simulation on the screen showing the charging process.
Also, if you're charging vis USB, the requirements are 5 volts from a USB connector. But the problem is amperage. Wall chargers can supply up to 1 amp (some will supply more, but you don't want more for a phone), while many computers will only supply 500 milliamps out of a USB connector. Thus the phone (battery) will charge faster with a higher amperage. If that doesn't do any good, you may have a bunk battery or some kind of hardware issue...
Sent from my MB865 using xda's premium carrier pigeon service
I am using wall charger. It seems consistent to charge slower at around 70% then speed back up at 90%. Are u sure that this is a symptoms of a spoiled battery?
To me(an accountant not a technicians) it seems like the "smart" phone is tell it to charge slower at 70%.
Sent from my Desire S using xda premium(nah dun have the money to buy premium)
Same problem
I have the same problem, first when I bought my SE x10 mini pro. It charged in 1.5 hours but nw it takes about 3 hours. I don't know the reason but I'm trying to find out how to solve this problem.
I'm not entirely certain its a case of bad battery, but it does sound a bit suspicious. If you're feeling up to it, you can try this: (it's worth a shot.)
If, after rooting or more likely that case after flashing a new rom, you often have battery reporting errors and re-calibrating the battery along with some steps I will outline for you below will ensure that your battery is getting a full charge, and the battery reporting accuracy is right on.
1. Take the case off your phone (one of the latter steps involves taking the battery out from the phone while it's plugged in. Make sure your case won't stand in the way.)
2. Install Battery Calibration app from the market
3. Plug in your phone to charge while it's on, wait till it gets to a 100%
4. When the charge is 100%, open the BatteryCalibration app and lookup what the charge is in MV while at 100%. Write it down.
My Atrix 2 was showing ~3400MV while at 100%, which is definitely not the maximum capacity.
5. Discharge your phone completely until it shuts off.
A good way of doing this quickly is by turning on wifi, and a video player.
6. Without turning on the phone plug it into a wall charger and let it get to 100%
7. When it's at 100%, without unplugging it from the wall charger, take off the battery cover, and take the battery out.
Your phone will "reboot" and show a Missing Battery icon.
8. Without unplugging the phone from the wall charger or turning it on, put the battery back in and wait until the phone recognizes the battery.
9. Your battery should now be recognized by the phone, and showing a charge % significantly lower than 100%.
Mine showed only 5%.
10. Let it sit there charging for 2-3 hours (or more).
My phone wouldn't charge past 10%, but yours might. The numbers don't matter much as the phone is definitely getting additional charge that could have been lost while flashing ROMs, etc.
11. After 2-3 hours (or more), turn the phone on while holding the volume down button and get into CWM.
Do not disconnect it from the charger still!
12. Wipe battery stats and reboot.
Do not disconnect it from the charger still!
13. When the phone turns on, go into Battery Calibration app again and look up your MV numbers -if you were like me, they should be significantly higher than before. After this whole process I had 4351MV at 100%, comparing to 3400MV before calibration.
Do not disconnect it from the charger still!
14. Make sure your wifi and data connections are off. Now finally unplug the phone from the charger.
Go to bed, let your phone sleep too.
The next morning, use your phone as normal throughout the day. Then when it comes time to charge again, see if that does anything for your battery life and/or charging times...
Sent from my MB865 using xda's premium carrier pigeon service
I liked your current charge curve..
bump
ps : i did try out #5 but no success
best way is shut down device when charging
Sent from my GT-I9300 using xda app-developers app
Yes is charges quickly when the phone is off, but what if i am expecting a call or some sort. Could it be a script some where to tell the phone when should it start slow charge or something similar?
So guys i got few questions about it.
Lg v10 has quick charging feature so i wanna know that how that works.
its works always, and any % ? or there is a certain point for it to work. im asking this bcus today i had 10% battery left and i plugged in its original charger with original cable which supporting quick charge. it was charging normally till 32%. i realized that and i plugged off charger and plugged back again it was still normal charging . then i again plugged of and closed phone and plugged it back when phone was off. it otomatically started phone and i entered my pin code. boom it started to quick charge
sso can some 1 explain me that quick charge?
Also that hifi dac works with bluetooth earbuds? like hbs910 - hbs 1100 or samsung level u pro ?( sorry my bad english )
Hmm... I'm under the impression quick charge only works with the screen off. Could that have played a part in this?
Sent from my LG-H901 using Tapatalk
My V10 also meets this issue. when your phone running out of battery at 0% lowest level, it is hard to activate the quick charger, i have to replug and unplug charger many times 10 times more to activate the charge process, the screen with phone and cable keep blinking and blinking...
But if your V10's battery still remain and you wanna charge, you just unplug and re-plug about 3 or 5 times, the quick-charge will activate. I have no idea if this relates to Software or Hardware issue.
SOLVED: my cable connecting my charger and phone is broken, change the cable, issue is solved!
Well I didn't think that I ll need quick charge since I was using z2 bcus I could have a full day no matter how much I use the phone. It was charging like in 3.5 hours. So I was charging it only when I go bed. But since v10's battery life isn't that good I realy need quick charge. I waited few months for bot buying first wave of v10 but still I bought first wave I guess. Let's hope it's software problem and get fixed soon
HTC
rerevene said:
HTC
Click to expand...
Click to collapse
[emoji53] [emoji780] [emoji780] [emoji780]
Well for me it works all the time. When i connect my original cable and charger i always get quick charge notification and it takes around 1 hour to fully charge the battery. I recommend though to leave the phone connected on charger for around 1 to 1.5 hour more if possible. This way the phone tops the battery charge fully getting additional around 200mA charge. You can install battery monitor widget from market and you will see that the phone continues to slowly charge after telling that battery is full. This stops when battery ot charged to the max.
0% to full takes 1 hour? that is rly nice since mine takes atleast 90 mins... even it says quick charging