First of all I want to thanks _n0p_ for the amazing rom.
I gave up on Ginger Streak because the instability of it, too many reboots, battery life, etc.
But my question now is, the instalation procedures on DSC says that the baseband must be 406.
I flashed the "flash_me" file but in my phone it shows GAUSB1A40514-US.
This is correct? The phone is working flawlessly so I need or not to flash the 406 baseband?
It's ok. It will eventually change to 4062 (not 407), we still don't know why bb number leaves that ghost traces.
Thanks for the answer _n0p_ .
Here comes another one, I tried to donate some bucks to you but the paypal said that the Ukraine accounts cannot receive money, this user is not qualified to receive money.
There's another way to send a couple of beers to you?
I actually don't need donations.
Also, DSC ROM incorporates work of many people, so that'd be unfair.
I gonna hijack this thread quickly.. my aplogies.
I'm running DSC now for quite a while but I could never get AAC streams running. Why's that? No matter what app I use. It always stops and says unsupported or unknown media features. I know there had been an issue like that in an early Froyo build but why in GB? I'm going to get really frustrated soonish.
BluB0HR said:
I gonna hijack this thread quickly.. my aplogies.
I'm running DSC now for quite a while but I could never get AAC streams running. Why's that? No matter what app I use. It always stops and says unsupported or unknown media features. I know there had been an issue like that in an early Froyo build but why in GB? I'm going to get really frustrated soonish.
Click to expand...
Click to collapse
Are you sure it the ROM, not the platform?
Have you tested CM7?
I just got CM7.2 + DSC Kernel running.. AAC(+) works!
Again thanks to _nop_.
I only have two issues. When I try to use the pattern lock it tends to stick. I often have to repeat three or four times. I found the same with CM7 and the Olleh Rom.
Also when typing the keys occassionally freeze.
Overall though the DSC rom seems the best for me.
---------- Post added at 10:54 AM ---------- Previous post was at 09:55 AM ----------
gluesniffmonkey said:
Again thanks to _nop_.
I only have two issues. When I try to use the pattern lock it tends to stick. I often have to repeat three or four times. I found the same with CM7 and the Olleh Rom.
Also when typing the keys occassionally freeze.
Overall though the DSC rom seems the best for me.
Click to expand...
Click to collapse
I found my own solution here:
http://forum.xda-developers.com/showthread.php?t=778494
I learned a new English word....Screen Calibration (For step by step):
http://www.streaksmart.com/2010/10/how-to-calibrate-dell-streak-touchscreen.html
This ROM is howling now.
need some help
i cant do anything to my dell ..
after i do recovery restore ..
it just hang .. it keep display dell logo only .. it cant enter into the system ..
what can i do ?
Is Streak recognized by PC?
Did you perform factory reset?
need some help
_n0p_ said:
Is Streak recognized by PC?
Did you perform factory reset?
Click to expand...
Click to collapse
cant do any factory reset.. it just hang over and over .
yes streak recognized by pc.
i done recovery method but until d update part .. it just cant update . . i try few solution by geting few sd card to perform .. it give me d same error message .. it there any way to save my dell ?
d error message
e: can not mount / dev / block / innersd0p5
e: can not mount CACHE: recovery / log
e: can not open CACHE: recovery / log
e: can not mount / dev / block / innersd0p5
i search for possible repair, i borrow few micro sd from friends and tried.
it came out with the same error message .. is there any other ways ?
it cant update.pkg ..
here is another error message
E:Can't mount /dev/block/innersd0p5
(Invalid argument)
E:Can't mount CACHE:recovery/log
E:Can't open CACHE:recovery/log
E:Can't mount /dev/block/innersd0p5
(Invalid argument)
W:Can't unlink CACHE:recovery/command
what can i do next ?
Consider replacing or reformating your internal SD card.
It seems to be in really bad shape.
Thank U very much Mr. n0p
It is a great pleasure using ur DSC 1.5, so far no issues at all, will there be any new versions like 1.6, 1.7, etc. Thank U
It will - hunderteins's doing a lot of work on Streak now.
_n0p_ said:
It will - hunderteins's doing a lot of work on Streak now.
Click to expand...
Click to collapse
+1 :thumbup: keep going on and never give DS5 up
Sent from my Dell Streak using xda premium
Thank u and looking forward
_n0p_ said:
It will - hunderteins's doing a lot of work on Streak now.
Click to expand...
Click to collapse
thanks and waiting for it
Related
Hey guys,
I have been getting so many PM's and I am sorry not to be able to answer all of them. Most of the questions I got were from people who could not post in Dev Forum and most of the questions were the same. So I would like you all to post here as most users can help you since I cannot answer every single PM.
To all the users who already know an issue please help the people to fix it.
Please keep it organized so I would like to introduce a pattern:
Code:
ROM: ?!?
Bug(s): ?!?
Question: ?!?
For anyone who is willing to answer (that includes me)
please answer as follows:
Link to the Post (right click on the right side and copy the link to post number xyz) copy the link and paste it. And then answer the Question with
Code:
SOLUTION to linktothepost: ?!!?
using ROM ?!?
Thanks Guys
That would be a great help!
P.S: you don't need to use CODE tags.
ROM: Cyanogen Froyo CM6-Latest (based on MiniCM/CM6v2) - All working! + Hotfix v1.1
Question: Do i need second partition in SD card to install this? Or i can have only one partition and also will be able to move apps to sd card.
Thank you.
Solution to Post 2:
You won't need any second partition to move apps, I even recommend not using any other partition cause froyo does a good job with this!
ROM: MiniCM v1.1
ROM: MiniCM v1.1
Question: Is this ROM undervolted (battery life is most important for me) if not, is it possible to undervolt it easy way (through xrec for example)
Question2: does your hotfixes install through xrec?
Question3: Can we expect a full build with all hotfixes + ldpi fix included soon?
Solution to Post 4:
Q1: The overclocked version is also undervolted if you want stock and undervolted set it to 600 MHz with setcpu (on boot). The not OCed version is not undervolted but i'll add this maybe later
Q2: Yes all hotfixes on first post will always be xrec flashable only thing is to keep the order while flashing so hotfix1 first and then flash hotfix2 and so on.
Q3: Yes but for now the changes have been to small for me to upload another full release
ROM: MiniCMv1.2
ROM: MiniCMv1.2
Question: What's the best and fastest way to backup your contacts, cause it's the only thing i want to transfer to this ROM after i update.
Sorry for making so many different posts with questions, not all of them came to my mind at the same time
Solution to Post 6:
Download MyPhoneExplorer in market and download myphoneexplorer for pc enable usb debugging and connect your phone via usb open myphoneexplorer and mini pro and pc and sync contacts.
Install rom and download myphoneexplorer from market again and sync with pc again. all contacts,sms,calls,calendar can now be restored.
ROM: MiniCM v1.2
ROM: Cyanogen Froyo CM6-Latest (based on MiniCM/CM6v2) v1.3
Question: Hi, I'm new on XDA. Your job is very impressive. I need a little help.
I already installed xRecover, but every time I try to install the rom I got the following error:
Output from Recovery.log
Code:
-- Installing: SDCARD:update.zip
Finding update package...
I:Update location: SDCARD:update.zip
Opening update package...
I:Update file path: /sdcard/update.zip
minzip: Missed a local header sig (at 16)
E:Can't open /sdcard/update.zip
(bad)
Installation aborted.
Mount /dev/block/mtdblock0 on /system read-only
I've tried using install Update.zip option, also with install custom zip. Same output for both and for the original filename too. Also checked the MD5 of the file and it was ok. Later I downloaded [ROM] Cyanogen Gingerbread CM7 Final Sources (v13.0 + Hotfix #2) and I installed it without problems. Now I don't know what could be the problem. I googoled a lot about this but no one has a final answer.
Any help would be great
ROM: MiniCMv1.3
Question: I've been using this ROM almost for a day now, it's really impressive. Everything is very stable and works fine. There is only one thing, some apps are not installing from Stock market. For example Angry birds. I don't really need it, but i think it's related to the size of the app so it might come up in other big applications, cause every smaller app downloads and installs fine. Then i try to download and install it, it just starts downloading and disappears after few seconds. Deleting all cache files helps for one time, then you need to delete it again and install another big application. Is there any way to fix it without deleting the cache file?
Bug: Well this is not really a bug, just wanted to say that this ROM has really weak reception, at least until i tried your 1.4hotfix. Where i had 0 blocks i now have 2, and where i had 2 i have 4, so this hotfix definitely works for me. Thank you.
Bug2: Maybe it's just me but keyboard light is on everytime you open it, doesn't matter if it's dark or not. As far as i remember it worked differently in stock rom (maybe i'm wrong).
For the people who are asking about battery life. I have observed how much battery does it use in standby mode. And with almost the same settings as in Stock 2.1 i managed to get about 2hours with 1% of battery. It's still a bit worse than stock where i got about 3.5hours with 1%. I just recently installed reception hotfix and will try to observe the battery life now, i think i'll manage to reach about 3hours with 1%. Gona inform you all later about this.
Solution to post http://forum.xda-developers.com/showpost.php?p=13422864&postcount=9
You could move some of the larger apps on to the SD card by going to settings/applications/manage applications, select the application you want to move and select move to SD. This will make more space on the phones flash memory allowing you to download larger apps from the market. Some apps won't allow you to move them to the SD card but most seem to allow it so try a few.
I've never had this problem so can't say for sure but it seems an intuitive fix.
Cheers
Giro
well phone has plenty of free memory (168mb currently), so that's not the case. but still thanks for reply
Boot into xrecovery and format cache. Reboot and you will be fine
Sent from my U20i using XDA Premium App
Damn it was feeling smug there for a second
No problem glad to almost help
slade87 said:
Boot into xrecovery and format cache. Reboot and you will be fine
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
formating cache doesn't help, tried just now.
after formating cache reception was very poor again, restored to the state before formating and reception is fine again... strange..
translate to another languages
Hi Slade,
Nice work! Is there a way to translate (for my girlfriend) not translated parts. Some general way to do it? Thank you for your patience with us!
ROM: MiniCMv1.4, but Gingerbread too (is it different?)
language: Slovak
ROM: Cyanogen Gingerbread CM7 Final Sources
Bug(s): Only know problems: reboot, camera and radio
But i can use without problem.
Your work is great!
Thanks
ROM: Cyanogen Gingerbread CM17 Final Sources v13
Bug(s): Camera App is in some kind of asian language (yeah i know its listed that the app is buggy but maybe its helpfull), the radio and Barnacle keeps crashing when _stop_ it, if its on it works fine, all my devices can connect but when i switch it off, my U20i reboots. Also sometimes my U20i freezes for a few seconds, but no reboot.
Other stuff works fine, awesome rom!
ROM: Cyanogen Gingerbread CM17 Final Sources v13
Question: I posted the question another day on another thread, which can be found here: Original Question Thread. Probably it's better to post the answer here =P.
Sent from my HTC Desire using XDA App
ROM: Cyanogen Froyo CM6-Latest (based on MiniCM/CM6v2)
Bug: Weird problem with youtube if I ear songs from youtube (or videos) and volume is at max, I ear a stranger sound coming like ever 7-8 sec °_°;
Hi, I'm from Germany and my English is bad, so I use a translator.
I'm really happy with the v3.7.
However, unfortunately I am missing the pictures in music player.
How can we solve the problem?
Thank you.
I'm not sure if i can fix your problem, but maybe you could try this miui music player it works in most roms.
If anyone knows a newer version i give a thanks because this is the only one i found and my memory doesn't even help me to remember where i found it
PS: It will only work in english, in other language it shows in chinese(i think, don't know if it is really chinese)
Found much better one!
Sorry double post, didn't know how to be able to edit and add new files in the post.
Found in another post:
http://forum.xda-developers.com/showthread.php?t=948556&page=3
I believe it won't install directly, but if you copy it inside system/app and reboot it will work like a charm.
This one is newer(newer that i've found) and also will be in english in other languages(it would be english before only if the android was in english).
If you like it, hit thanks button, thanks!
I am having a problem with the sound coming from the ear speaker
I am also having problems with force closes, Facebook connections (the background sync) fail, and I can't pair with a Bluetooth hands-free device. (if it is compatibility can this be modified rom?) I would greatly appreciate the help, as I have dug through threads and threads of threads. Googled the issues, through different descriptions, both detailed and simple, and I could not find any resolutions, regarding these issues.... please help, otherwise the ROM is Great....
.I appreciate all of the hard work the DEV''s Admins and moderators do.....as well as all of the others that pitch in to make this a glorious site. Worked with several mods, including installing a cam on my Blue Angel, for a few years. I don't see how i got by without this site.....THANK YOU THANK YOU THANK YOU!!
Rooted XPERIA X10i - Android 2.3.3 - WB-XPERIA TW Gingerbread with V3.7
for me the album art is coming ... i used cover art downloader for all music ..and ya jus clear ur applications/music in it clear data will be there after that i think u will get ..
for me it worked
Hope does for you too
Thank me if it did work !!
@ gcopher
i think regarding ur problem have u flashed wolf's latest v3.8 on ur Rom ??? if yes then
it has some problems for me too regarding updating facebook !!! else if ur not using then have u fixed permissions in xrec !! ??
if not try doin it and i think it shud work
Thank me if it worked !!!
I have problem with auto brightness. I used a lot of different widgets/apps to turn it on, but they don't work. FAQ said that I should turn it on with power widget, i tried and it doesn't work.
@Lesmian
have u rooted ur phone and if u have rooted then do fix permissions in Xrecovery
hope it works !!
Thank me if it did
eh ;/ I fixed permissions, but all is the same. Auto brightness still don't work.
i jus tried it on mine ..its workin fine!!! ...dunno what might be the problem in urs!!
hmm and you use wolf rom v 3.8? did you changed something in settings or it just works? Do you use any widget for auto brightness set up?
no i use power widget and m using wolf's v3.6 !!
@acerulz
Yep I fixed permissions, however, it did not 'fix' the sound. Still coming from ear speaker and blue tooth issue is not resolved.
I DON'T THINK 3.8 was not available until this morning, I will upgrade to see if it "fixes it", HOWEVER, IF you are having problems with 3.8, the issue isnt resolved.
THANK YOU FOR YOUR ADVICE!!!
Mount Card
Mount Card
I Can't update to WB 3.5...
I'm always getting this message:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(Device or resource busy)
E:Can't mount /sdcard
I've already made the backup and tried several times to do all the process (flash 2.1, root, install 2.3.3 rooted) but I'm still unable to perform this update...
Is there anything I can do>>>
Thank you so much....
same same, in fact worse..... multiple FC's on 3.8, most of the apps and some in the background
moacirbtu said:
Mount Card
I Can't update to WB 3.5...
I'm always getting this message:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(Device or resource busy)
E:Can't mount /sdcard
I've already made the backup and tried several times to do all the process (flash 2.1, root, install 2.3.3 rooted) but I'm still unable to perform this update...
Is there anything I can do>>>
Thank you so much....
Click to expand...
Click to collapse
You need to install the new GB ready xrecovery. There's a thread about it in the development forums.
Sent from my X10i using XDA Premium App
acerulz said:
no i use power widget and m using wolf's v3.6 !!
Click to expand...
Click to collapse
Can you tell me which power widget do you use? I dont have any power widget pre installed in wolf rom. Only on/off widget.
I have a problem as well. Im currently on v3.5 + update 3.6 (was offline few days, so im missing 3.7), i wont update to 3.8 (seems unstable) and im currently missing a Conversations.apk (found 1, the icon is not the real SE icon, its some modded, and i dont like it) can anyone provide me the original SE conversations.apk?
Query about flashing 3.8 update
hello..this is my first post here. I flashed WB rom v3.5 around the time it was released and its totally changed my phone. Its super snappy now..
I saw the 3.8 update thing today and my question is whether I can flash it using xrecovery without any data wipe because I have already done all the syncing stuff after the first flash.
I flashed 3.8 update without any data wipe and all works fine for me.
So i tried to install the Gapps and it says installing Google Apps.. Installation Complete!
Then when i back out to reboot it says Install from sdcard complete
E:can't mount/cache/recovery/log
E:can't open /cache/recovery/log
E:cant mount /cache/recovery_last_log
E: Can't open/cache/recovery/last_log
Anyone have any idea whats happening?
Edit/Delete Message
So frustrating
No Apps. No Contacts.
abcs1 said:
So i tried to install the Gapps and it says installing Google Apps.. Installation Complete!
Then when i back out to reboot it says Install from sdcard complete
E:can't mount/cache/recovery/log
E:can't open /cache/recovery/log
E:cant mount /cache/recovery_last_log
E: Can't open/cache/recovery/last_log
Anyone have any idea whats happening?
Edit/Delete Message
Click to expand...
Click to collapse
Install it by rebooting into recovery from cyanagogen mod by holding down the power button then click reboot then recovery (if your in CM7) then install it from there thats how its done.
Thanks for the response.
I tried using that method as well, and it wouldn't let me select any of the options once I got into CWM.
abcs1 said:
Thanks for the response.
I tried using that method as well, and it wouldn't let me select any of the options once I got into CWM.
Click to expand...
Click to collapse
Actually nevermind, i think it worked finally. Instead of using the arrow, i had to use the power button to select.
One last question, how do i turn the feature on where you tilt the phone one way or the other the phone recognizes it.. (for games).
abcs1 said:
One last question, how do i turn the feature on where you tilt the phone one way or the other the phone recognizes it.. (for games).
Click to expand...
Click to collapse
I know the answer to your question, but I'm sure my response wouldn't come quick enough for you so you'd better post this question on yet another forum hoping for a quicker reply. People do have lives and things going on outside these forums. Try to keep that in mind when the responses don't correlate with your timeline.
landshark68 said:
I know the answer to your question, but I'm sure my response wouldn't come quick enough for you so you'd better post this question on yet another forum hoping for a quicker reply. People do have lives and things going on outside these forums. Try to keep that in mind when the responses don't correlate with your timeline.
Click to expand...
Click to collapse
I understand that you as do I, as do other people reading this thread have lives outside of little piece of technology. Not sure where that came from, or the purpose. I posted it another forum seeking help, like I said at the other forum, i thanked you for your responses. I wasn't sure how long it would take for you or someone else visiting to get back to my question, so i went elsewhere. I was a little anxious that i screwed up my phone..
No hard feelings from me.
Hey Guys!
Prologue
I have a complex problem with my beloved Vibrant. First of all, I got it for Christmas a year ago. It had no issues, with a stock 2.1 (and after a kies update 2.2) firmware, it was fun for a first droid. After digging myself into the world of droids, I decided to root my baby, and put CM on it. It was about a month ago; I saw that there is a stable cm10 for the Vibrant. There were minor problems (could not exit cm recovery and boot the phone normally) with doing it, but at the end, it worked flawlessly.
Problems
Unfortunately, a few days ago, my phone started to have problems like "Trebuchet stopped working" and similar error messages appeared on screen. Yesterday my Vibrant stopped working. The only thing it could do was when I turned on, it showed cm recovery. I chose to reboot the phone, but again, recovery mode came up.
- Now, I use a stock 2.2 (Eugene's) but with this, I cant really use my Vibrant, except for calls and sms.
- Odin cant see my phone.
- I cant revert it to normal stock firmware
- When trying to put a cm10 to it, reboots into recovery it says: cant mount dev/block/mmcblk0p1
What I did
First of all, a lot of research. Really, a lot, but I suppose not enough, because I cant repair my phone.
- I tried to revert to stock (using AIO Vibrant toolbox). I put Cmenard's kernel (with cm recovery, as described in the official cm wiki howto) onto the phone, since then Odin cant see my phone.
- I have Heimdall, adb shell installed on windows, so tried some lines to revert the Vibrant to normal, no success
- Rooted with superoneclick, so I have root, and su.
Summary
My suspicion is that the internal SD card is corrupted. Anyhow, I tried to use parted, but cannot format my internal SD card. I found solutions that may help, but unfortunately I have no exterior SD card, to make those steps.
Any help would be highly appreciated, as I am starting to lose my mind, and I do not really have a backup phone (will definitely buy in January).
In the top of that, today is my birthday.
Greetings to all,
Dan
Wierd, does ur phone go into download at all? have u tried heimdall on ubuntu?
Pauler1 said:
Wierd, does ur phone go into download at all? have u tried heimdall on ubuntu?
Click to expand...
Click to collapse
Yes, download mode is ok, 2 volume buttons pressed, then plug in the usb cable. Before the new kernel was put on, I used the same method and eg was okay with Odin, thats how I put on Eugene's mod as well.
No, (unfortunately) I use windows 7. Or do you mean, I should use ubuntu?
mobildeck said:
- When trying to put a cm10 to it, reboots into recovery it says: cant mount dev/block/mmcblk0p1
...
Summary
My suspicion is that the internal SD card is corrupted. Anyhow, I tried to use parted, but cannot format my internal SD card. I found solutions that may help, but unfortunately I have no exterior SD card, to make those steps.
...
On the top of that, today is my birthday.
Greetings to all,
Dan
Click to expand...
Click to collapse
First and foremost, happy belated birthday. It's a shame this had to happen on your birthday... Especially since I have some rather bad news. In your post--which, by the way, was very well written--you mentioned getting the error "cant mount dev/block/mmcblk0p1" while in recovery. This is a pretty bad sign. More than likely, one of two things happened. Either you obtained the Encryption Unsuccessful bug or your internal SD card outright crashed. Either way you're going to need to purchase an external SD card if you wish to continue using your phone. No way around it bud, sorry.
I had the EU bug hit my device a month or two ago, and had to purchase an external SD card as a result. After partitioning the new SD card and tweaking the phone to run off of it, my phone runs great... But switching back to stock/installing a new ROM can be a tricky process...
Good luck. If you have any questions don't hesitate to ask.
Oh, and this guide should be able to help: http://forum.xda-developers.com/showthread.php?t=1580902
Sent from my SGH-T959
mobildeck said:
Yes, download mode is ok, 2 volume buttons pressed, then plug in the usb cable. Before the new kernel was put on, I used the same method and eg was okay with Odin, thats how I put on Eugene's mod as well.
No, (unfortunately) I use windows 7. Or do you mean, I should use ubuntu?
Click to expand...
Click to collapse
Yes, I meant use ubuntu, but N00B in N33D i think has the right answer, i overlooked the "can't mount" part of the post. Sorry about all of that happening on your birthday:/
N00B_IN_N33D said:
First and foremost, happy belated birthday. It's a shame this had to happen on your birthday... Especially since I have some rather bad news. In your post--which, by the way, was very well written--you mentioned getting the error "cant mount dev/block/mmcblk0p1" while in recovery. This is a pretty bad sign. More than likely, one of two things happened. Either you obtained the Encryption Unsuccessful bug or your internal SD card outright crashed. Either way you're going to need to purchase an external SD card if you wish to continue using your phone. No way around it bud, sorry.
I had the EU bug hit my device a month or two ago, and had to purchase an external SD card as a result. After partitioning the new SD card and tweaking the phone to run off of it, my phone runs great... But switching back to stock/installing a new ROM can be a tricky process...
Good luck. If you have any questions don't hesitate to ask.
Oh, and this guide should be able to help: http://forum.xda-developers.com/showthread.php?t=1580902
Sent from my SGH-T959
Click to expand...
Click to collapse
Thank you very much for the answer and the kind words. I will get an SD card then, I will need it later on anyway I guess. I will try this method you linked, and going to post about what happened (but not in the near future, Christmas is coming).
Good news, your phone runs great now after those things, it means I have a little chance at least. :fingers-crossed:
Thanks again, the best wishes for the holiday season!
Pauler1 said:
Yes, I meant use ubuntu, but N00B in N33D i think has the right answer, i overlooked the "can't mount" part of the post. Sorry about all of that happening on your birthday:/
Click to expand...
Click to collapse
Thanks! Yeah I was kind of disappointed, but maybe I can sort it out.
Okay, thanks again, and the best wishes to you as well!
Hey Guys.
Lately, I bought an sd card (class10, 16GB) and tried to breathe life into my Vibrant. Used this method (except the fact, that I used cm10):
http://forum.xda-developers.com/showthread.php?t=1665123
Actually this worked.
Before that, I figured out, that Odin couldn't see my device because of some driver errors Heimdall caused. (Or Heimdall/zadig installed some other drivers, to be more precise.)
So after reinstalling those drivers from Vibrant AIO Toolbox, I used that method.
But.
The final step, where you edit the vold.stab file, those two lines are swapped for me. Anyhow I tried to edit both ways (as written originally in the post, and tried to swap the lines) but unfortunately after editing, saving the file, and rebooting, the phone just stays at the animated cyanogenmod logo. Nothing happens. Really, I waited an hour or so, still nothing. Tried to reinstall everything, clear cache, dalvik, then phone reboots again normally to cm10, but as mentioned in the post, camera does not work.
Any thoughts would be helpful here.
EDIT:
That post says it should be this after editing:
#internal sdcard
dev_mount emmc /mnt/sdcard 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
#external sdcard
dev_mount sdcard /mnt/emmc auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
and my file contains this originally:
# internal sdcard
dev_mount emmc /storage/sdcard1 auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
# external sdcard
dev_mount sdcard /storage/sdcard0 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
So it would be great to edit these two lines correctly.
Bump. Any help would be appreciated.
This is the last and only problem with my phone, and it doesn't look like it's an unbeatable problem.
There is a different syntax for Jellybean roms. See here
floating_flower said:
There is a different syntax for Jellybean roms. See here
Click to expand...
Click to collapse
Thank you very much! Wow, this worked like a charm! One zillion thanks!
Hopefully this thread will help out many Vibrant users experiencing problems like this one was. Thank you all once again.
Hi guys.
Since then, I have flashed the CyanAOSP 2.9.0 ROM into my beloved vibrant, new kernel (gearkernel universal 1.1.2) and everything works fine, 4.4 is flawless in this device as well,
however
I am now facing some problems again, as the system cannot access the sdcard part, so with rootbrowser I can edit files and anything else, but camera, music player and gallery is not working.
I am thinking of a vold.fstab editing, but as 4.4 has this no more, I am stuck at this point. Any ideas of how and what to edit? Tried build.prop, no success so far. In CWM I can see that the sdcard is not mounted. Mounting it also did not help either.
Edit: I would think, editing the fstab.aries would be the key in this process, but I cannot really tell which part needs to be edited.
Hello for 2 days I was trying to use cm 13 (because I wanted to try it) but while doing that I might of messed up the partitions when changing and using different pits. For example when using mini OpenGapps it says no space for /system or something similar to that (I know that your not supposed to use bigger Gapps because it can slow down the phone down but I wanted to try) and for when using TWRP and pressing Repair or change File System it says invalid partiton selection and it is very hard to find a way to fix these issus but other things work it doesnt say anything about unable to mount partitions and the phone works when using LOS 17.1 so is there anyway to make it not show these error messages and not show error messages some times so if anyone has any fixes or suggestions please tell me. :crying:
(I am new to xda and flashing roms in general so if this makes no sense sorry.)
(I have the 16gb i1900 international!)
If anyone has a suggestion or something I can do or knows a way to fix this please tell me. Thank you for reading. :highfive: