Hi
I was hoping someone could help me out. I have researched this forum but haven’t found a clear answer to my question.
I currently have an unlocked rooted stock Rezound and am interested in trying out ICS, but want to keep the old radios (firmware) , in case I want to return to original stock/firmware.
Can someone please provide me with clear directions on the exact steps I need to take to flash to ICS. Any input would me much appreciated
telefoner said:
Hi
I was hoping someone could help me out. I have researched this forum but haven’t found a clear answer to my question.
I currently have an unlocked rooted stock Rezound and am interested in trying out ICS, but want to keep the old radios (firmware) , in case I want to return to original stock/firmware.
Can someone please provide me with clear directions on the exact steps I need to take to flash to ICS. Any input would me much appreciated
Click to expand...
Click to collapse
Which ICS Rom are you looking at? Most of them have the directions in their first posts. They require flashing one additional patch if you want to keep the old firmware. There's a few threads with exact directions already...
Looking at Clean Rom. It is not clear to me if I need to relock the bootloader or not . Also must I always start with installing the PH98IMG zip no matter what?
telefoner said:
Looking at Clean Rom. It is not clear to me if I need to relock the bootloader or not . Also must I always start with installing the PH98IMG zip no matter what?
Click to expand...
Click to collapse
If you want to keep the old firmware, no need to lock the boot loader or try to run the ICS leak RUU...
Just follow the directions in the clean rom thread and install the old firmware patch. When you install CleanRom 4.3 or the 1.2 DE, it creates a folder on the SD card and you can find the patch there. Continue on and install the boot image as it states.
Thank you so much. That answers my question.
I ran mine for a couple days bone stock. My radio performance was SIGNIFICANTLY worse than my Tbolt sitting 10 inches from it. I'm running BAMF now on new firmware and my radio performance is much better. Much less data network hunting, holding onto signals longer, and smoother transitions between cells. I'm also getting round about 9 hours on a charge including nearly an hour of HQ youtube on the stock battery. It SEEMS to me the new firmware is a marked improvement, but actually results always seem to vary, of course. Just my 2 cents.
Related
Hey guys, so I just ordered an Eris which I intend to use on MetroPCS.
I just want to make sure that I'm doing all this in the correct order..
So, fist thing is that I need to make sure that the phone has 2.1 on it in order to use the 1 click root solution(love )
-Though if my phone isn't 2.1..how do I upgrade without rooting so that I can root?
Next, I need to choose a rom to use. I found the read first sticky listing all the most current roms and radios and other info on how to actually install them.
-Though, since the thread is closed are they really all the latest?
Lastly, I need to Flash (not sure if that is actually the correct terminology) the phone's settings over to Metro using the file found here.
I think that's the basic direction that I need to take. Please let me know if I'm missing anything.
I am in the dark about a couple things, though I'm not sure I need to understand them.
I know the kernel is a central part of the OS, but doesn't it come with the rom you choose? Why would you need to flash the Kernel, is it just to update your rom without actually changing your rom?
Also, what's with recovery images and what's an RUU?
Finally, how do I pick a rom that's right for me!? There seem to be so many and I'm not sure which are the most recent/functional/fast..
Anyway, you guys are awesome for all you do and I hope that this thread can be useful to someone besides just me.
Thanks again!!
conradcliff said:
Hey guys, so I just ordered an Eris which I intend to use on MetroPCS.
I just want to make sure that I'm doing all this in the correct order..
So, fist thing is that I need to make sure that the phone has 2.1 on it in order to use the 1 click root solution(love )
-Though if my phone isn't 2.1..how do I upgrade without rooting so that I can root?
Next, I need to choose a rom to use. I found the read first sticky listing all the most current roms and radios and other info on how to actually install them.
-Though, since the thread is closed are they really all the latest?
Lastly, I need to Flash (not sure if that is actually the correct terminology) the phone's settings over to Metro using the file found here.
I think that's the basic direction that I need to take. Please let me know if I'm missing anything.
I am in the dark about a couple things, though I'm not sure I need to understand them.
I know the kernel is a central part of the OS, but doesn't it come with the rom you choose? Why would you need to flash the Kernel, is it just to update your rom without actually changing your rom?
Also, what's with recovery images and what's an RUU?
Finally, how do I pick a rom that's right for me!? There seem to be so many and I'm not sure which are the most recent/functional/fast..
Anyway, you guys are awesome for all you do and I hope that this thread can be useful to someone besides just me.
Thanks again!!
Click to expand...
Click to collapse
Probably once you get the phone it will already have the 2.1 official OS or you can update it through the Settings and have it check for updates. I would suggest that you try xtrSense. I have no clue on the Metro settings though but I would imagine once you get a good ROM flashed that all you have to do is to just install the settings.
Thanks, yeah..I think that link that I posted takes care of the metro settings..at least it says it does.
I didn't think I would be able to do an over the air update because I was assuming that it was DL'd from a verizon server. Does the update to 2.1 come from a typical internet source that can be accessed from any network?
Hey guys, Im completely new to rooting and im getting a rezound in a couple days and i just had a few simple questions that i couldnt find the answers too else where.
1. If I root my rezound will i still be able to receive all the regular updates like the verizon updates and upcoming OS updates? If not what can i do to get those?(Correct me if im wrong but I would assume that i would have to reverse my root somehow if the answer was no but im not sure how to do that)
2. If i root do i have to install a ROM?(Note:Im planning to remove htc sense as soon as i root and install a new launcher...idk if that has anything to do with having to install a ROM but i figured i should ask)
if you plan to stay on the original rom after you root, im pretty sure that you will be able to recieve the actual ota when its released. but you say that you plan to delete a lot of htc stuff (im assuming bloatware and things like that)...i would HIGHLY recommend just flashing a rom with all of that done for you. unless you know what youre doing, removing htc stuff by yourself can be detrimental to your phone and cause it to not work as it should. im currently running cleanrom 4.1 and its incredible. flashing a rom would be the best way to go
hope this helped.
yes that help, thanks. so if i were to use cleanrom 4.1 and i wanted to get the official ICS update when it released, what would have to do to be able to install it?
Forgive me for being a noob but I am going to attempt my first post I usually just read but feel I may be able to give a quality answer. SO, If you make a nandroid backup before flashing any rom's you will be able to revert back to stock at any time. You can do this via a custom recovery. In order to get an OTA, like the ICS one that is coming soon, you will have to reload your stock rom. Simply put, you cannot get an OTA with a custom rom. If you want a custom rom now and an OTA update later, make a backup and revert back to it when the OTA you want is released. Hope this helps!
One thing that nobody seems to ever mention is do NOT do anything to your phone for the first 30 days because you want to make sure you have a solid phone.
If your phone is constantly malfunctioning because of a problem with the phone, but you have already rooted your phone and flashed a new ROM, then you're going to be nothing but frustrated because you will think it's the ROM, or perhaps something you did when rooting the phone.
If you have a problem within the first 30 days and you have not rooted or flashed a new ROM all you do is walk in to Verizon, tell them the phone is brand new, but having issues with [insert problem here] and you get a brand new phone with all your info transfered for free, and another 30 days to make sure your replacement is not defective as well.
Sent from the resounding Rezound
very good tips! thanks guys, your answers are highly appreciated!
Aaronmc
What device are you coming from? I went from an OG Droid1 to the Rezound and actually love Sense. I think you should try it out first before cutting it out completely. If you wish you can leave the stock Status Bar/SystemUI and install a different launcher as that will disable most of the Sense elements, ~90% of it. As far as OTA's go, unconfirmed whether or not you can update from the recent leak. Make sure you have stock rom available or do not flash the recent leak and choose one of the older roms (Can always RUU back to the stock rom when official hits). I suggest Rezrom 3.1 with the old firmware patch as for me it's been so far the most stable and best battery life ICS rom I have used.
1. No, you won't be able to get OTA updates. But don't worry too much about that. It takes about a week, but the devs will post a manual method or you can use the RUU that usually preceeds the OTA by a day or two.
2. Don't try to disable sense from the stock ROM. It'll be trouble, I tried it for a while back when we only had temp root and it made it buggy and smoked the battery. Flash some ROMs and let the pros get that stuff worked out for you (and throw your favorite dev a few bucks to keep him interested!)
The real consequence of rooting though is the countless late nights flashing yet another new build or theme or whatever. It's kind of addicting.
Ok firstly im no stranger to Android, and not entirely new to Moto (Atrix 4G), but I have to say that the RAZR has me pretty confused.
I have a Rogers RAZR being delivered that I picked up on the cheap. Its brand new and supposedly "unlocked". I would love to get ICS running on it, but despite reading the treads here for the last couple of days im still uncertain if its possible
I have used RSD before with the Atrix, but it was only to apply a patch that would allow you to unlock the bootloader (also surprised to see that the RAZR is still locked down). I know that you can flash ROMs via RSD, but what I do not understand is whether or not root and custom recovery is required? I assume that if you're flashing an official ROM, then no it is not. Correct? I also thought that flashing full sbf files was dangerous to attempt. Maybe im way off here, I don't know.
Im still a bit confused about the GSM patch for CDMA ROMs too. People seem to report issues with their phones when this is done. So im not too sure that it is a good idea to go that route either.
I understand that when things start to happen for a phone in terms of ROMs, recovery, work-arounds etc... that it can get a bit messy in the forum and things can get buried a few pages back, but i've been reading until my head hurts and i'm still uncertain where to begin. Also, there is an update that is also "supposedly" beginning this month for official ICS, but we all know that could be delayed, and delayed, and delayed. Wondering if I should just wait.
I guess I'm really hoping for someone to say do this, then this, and this...viola! I don't need an in depth step by step as I know how to figure out instructions from their respective threads. But if someone has a min to post a point form list like
Root with Motofail
Install Boot to CWM
Flash this ROM
Then this ROM etc etc...
Any help is appreciated and I hope no one thinks im asking to have my hand held here, but im at a loss. Just don't want to F my new phone when it arrives.
Thanks in advance for anyone who can help a fella out.
brunswick000 said:
Ok firstly im no stranger to Android, and not entirely new to Moto (Atrix 4G), but I have to say that the RAZR has me pretty confused.
I have a Rogers RAZR being delivered that I picked up on the cheap. Its brand new and supposedly "unlocked". I would love to get ICS running on it, but despite reading the treads here for the last couple of days im still uncertain if its possible
I have used RSD before with the Atrix, but it was only to apply a patch that would allow you to unlock the bootloader (also surprised to see that the RAZR is still locked down). I know that you can flash ROMs via RSD, but what I do not understand is whether or not root and custom recovery is required? I assume that if you're flashing an official ROM, then no it is not. Correct? I also thought that flashing full sbf files was dangerous to attempt. Maybe im way off here, I don't know.
A. Yes. If you're flashing an official rom you do not need root/cwm. Flashing full sbf with rsd is safer than cwm restoring a nandroid backup. But if you do you'll not be able to receive further otas updates. Bootload is locked in Razr also there's a region signature verification. So you cannot flash another region rom. :/
Im still a bit confused about the GSM patch for CDMA ROMs too. People seem to report issues with their phones when this is done. So im not too sure that it is a good idea to go that route either.
A. Most of related problems on that is due bad procedure following.
I understand that when things start to happen for a phone in terms of ROMs, recovery, work-arounds etc... that it can get a bit messy in the forum and things can get buried a few pages back, but i've been reading until my head hurts and i'm still uncertain where to begin. Also, there is an update that is also "supposedly" beginning this month for official ICS, but we all know that could be delayed, and delayed, and delayed. Wondering if I should just wait.
A. There's one official update for latam razrs, like yours. The 2.3.6 > go into dev section and you'll find out. Ics will out in a month. Fingers crossed!
I guess I'm really hoping for someone to say do this, then this, and this...viola! I don't need an in depth step by step as I know how to figure out instructions from their respective threads. But if someone has a min to post a point form list like
Root with Motofail (motofail is for gsm 2.3.6 only)
Install Boot to CWM (this is for restoring custom roms and backup, u need to be root for)
Flash this ROM (look for latam razr roms)
Then this ROM etc etc...
Any help is appreciated and I hope no one thinks im asking to have my hand held here, but im at a loss. Just don't want to F my new phone when it arrives.
Thanks in advance for anyone who can help a fella out.
Click to expand...
Click to collapse
If I didn't get any point let me know.
Cheers
Sent from my XT910 using Tapatalk 2
Thank you. You hit the points. Much appreciated.
Sent from my Nexus S using xda premium
Just order a new atrix 4G. I have looked at the possible ROM's to use and I want to try out the Neutrino ROM. I have rooted devices before but I am new to Motorola devices. Please help me find the CURRENT steps I need to take to get to be able to run the Neutrino ROM? I have used the search bar but a lot of the threads that I have found contain links that are no longer valid. Such as http://forum.xda-developers.com/showthread.php?t=1154600 Also I read a this link http://www.xda-developers.com/tag/motorola-atrix-4g/ which has me a worried that I may end up having an issue because all of the guides or seem to have been written before May 15th.
Thanks for taking a look and sorry if that was a little confusing I just didn't want to get flammed for being lazy. In the end I just want to know the most up to date way to get to the Neutrino ROM?? Below I will have included the specs. If I need to post anthing else please let me know
I recieved my phone last night and set it up on Striaght Talk.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model Number: MB860
Android Version: 2.3.4
Your help is GREATLY APPRIECIATED!!
Also on the youTube videos they all seem to say "DO NOT DO TRY TO UNLOCK OR ROOT IF YOU HAVE 2.3.4 OR IT WILL BRICK YOUR PHONE!!"
Is this still the case or has there been a work around for it yet??
you have to unlock bootloader, but you can get FAIL with last step.
If you will get fail - don't worry, you can still unlock it via fastboot (tested on mine INTL Atrix, but every phone is a little bit different)
flash recovery, wipe data, wipe cache, wipe dalvik, flash rom, flash gapps. Done
Thanks ovitz. Can you point me to a thread describing how to unlock the bootloader on this phone?? I can do all the other stuff that you said I need to do after the bootloader is unlocked(clearing and flashing). Just really dont want to mess up my phone. I got 2 actually one for my girlfriend as well. I have java and all SDK/ADB and all programs that I may need. Just want a step by step for comfort.
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
What is the other way (not using fastboot) to unlock this bootloader?? I tried fastboot oem unlock and got this message "INFOOEM unlock is not implemented"
Do I need to use an SBF with RSDlite or something to make this possible? If so please point me in the direction of that thread!?!
Thanks for anyone that can help
ravilov said:
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
Click to expand...
Click to collapse
Sorry ravilov...Did not see your post as I had started a post and then ventured off to seach XDA and some other forums again as well. I have gotten to the link that you posted several times. I just saw that is was posted a long time ago and that there is a lot of things in that post that dont make too much sense to me.
First it says "All phones If you have unlocked then try to use 2.3.4 update zip from Motorola servers, then revert back to a "pre-unlock" version(1.8.3 or earlier on ATT) you will get bricked! Do not use the OTA via experimental servers and revert to older versions WITHOUT pudding preinstalled in your sbf. ATT ONLY Get your 1.8.3 with pudding from the pudding/unlocker section below."
Then shortly after is says "Disclaimer: Tested on 1.8.3 and 2.3.4 using sbf_flash and RSDLITE 5.3.1 or higher, usual warnings being responsible for your own actions yada yada"
So I dont really know if it works or not on the newer atrix's. I dont want to brick a brand new phone and I would just like to see that some one else has done it recently. So yes my eyes are open and search did work for me if you did not see the 2 other threads I mentioned. I just want something up to date, not from early 2011. If it can be confirmed that this works or If you know someone who has unlocked it recently, that would be great to hear from them.
Thanks for posting the link to that thread anyways though. Much apprieciated!
Can anyone tell me if the IHOP method to unlock bootloader will work with my phone?? I cant post in that thread because I do not have enough posts. Here are my specs so I could get some help with which patch to use with RSDlite.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model number: MB860
Android version: 2.3.4
Baseband version: N_01.100.00R
Kernel version: 2.6.32.9
[email protected] #3
APflex version: GAS_ASIA_USAOLYGBSEART_P011
GAS_ASIA_USAOLYGBSEART_A003
GAS_ASIA_USAOLEMSEARET_M001
Build number: 4.5.2A-74_OLE-31
Something else I want to note is that it was bought on ebay as unlocked so I am assuming that is the radio. When I set up the APN for straight talk it did have the choices for AT&T US, AT&T US HSDPA, AT&T US Tether, AT&T US MMS. So this is why I am a little confused/scared as to which piece of pudding to use. It looks easy enough to unlock and clear the caches and flash the ROM I will want to use. Just would like to know which one to use.
Please, please somebody help!!:fingers-crossed:
Thanks you for taking a look to help. Much apprieciated!!!
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
das8nt said:
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
Click to expand...
Click to collapse
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Oregon2 said:
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Click to expand...
Click to collapse
Quite welcome.
APNs are usually set by your SIM, if it's provisioned properly and the phone supports it.
Sent from my MB865 Atrix 2 via Tapatalk 2
Good to know About the APNs. Just to let you know I unlocked, rooted, and flashed the ROM the day you first replied. So I've been running with a new ROM for 3 days and the battery life is great!!
If anyone out there has installed the Neutrino ROM, I have one more question. On the Neurino ROM page it say to do these 2 steps:
"Then, after booting, click on script manager, navigate to /system/etc and run NitroCharger.sh as ROOT and at BOOT!
It is also HIGHLY recommended to download the GPS Mod found in #2. Then you're done."
I tried flashing the GPS mod but I keep gettng an error. Then on my first boot I tried going to /system/etc and from there I do not know where to locate NitroCharger to run it for either. Any help on these two issues would be great!! Also another thanks for everyone for taking a look and helping.
I would post in that thread but I still dont have enought posts.
You really need to reread the original Neutrino thread, since all of this has been answered countless times.
YOU DO NOT FLASH THE GPS MOD DIRECTLY. Open the ZIP and read the instructions.
NitroCharger is only available as an OTA update, but you might reconsider if you really want it since it's been known to cause issues.
Again, I know the thread is very large, but whatever questions or issues you might have, it's very likely answered there already.
Thanks you for just answering, even though you think I should just reread the thread. That answered my questions very fast. I will just not run Nitrocharger, I thought it may casue problems if I could not get it to run, instead you said it is the opposite. As for the GPS mod I just did open up the .zip and read the readme. I pulled out the United_States.zip
Can I just use CWM recovery to flash the US.zip now or do I have to clear all my caches and the likes beforehand?
I know your very busy and I apprieciate the time you take to just look at it.
I have just started my own business and it is going great!! but I have been working 14+ hour days with usually 9 hours hour doing very hard physical labor 6 days a week!! I need to hire more employees soon, lol. I read the whole IHOP thread from front to back and the Neutrino thread but I was very exhasted and stayed up until 330 in the morning doing it!! So again I thank you for taking your time I appriciate it very MUCH that you are helping me to have a fun android experiance and also to learn something new to me!!
Yes, you can just go ahead and flash United_States.zip. No need to clear anything.
Awesome your the MAN!! Thanks again :laugh: :good:
So, I have been reasonably experienced in the Android world with terms to Nexus devices and Samsung but HTC still confounds me. I have an S-Off Rezound, it is on GB Firmware and everytime I flash a ROM I have to flash a fix for old firmware or else is random reboots. I have searched and searched on different occasions for the answer to this but I have yet to find a straight answer. Feel free to flame me, be rude, etc., but can someone please point me in the right direction. My Fiancee loves her Rez, has been running sense 4.1 since we got it (it was s-off when we got it, a happy surprise from the seller we bought it from on eBay.) But she is weary of the extra steps she needs to take to update a ROM. Can anyone point us in the right direction?
[/COLOR]
loveableterrorepic4g said:
So, I have been reasonably experienced in the Android world with terms to Nexus devices and Samsung but HTC still confounds me. I have an S-Off Rezound, it is on GB Firmware and everytime I flash a ROM I have to flash a fix for old firmware or else is random reboots. I have searched and searched on different occasions for the answer to this but I have yet to find a straight answer. Feel free to flame me, be rude, etc., but can someone please point me in the right direction. My Fiancee loves her Rez, has been running sense 4.1 since we got it (it was s-off when we got it, a happy surprise from the seller we bought it from on eBay.) But she is weary of the extra steps she needs to take to update a ROM. Can anyone point us in the right direction?
Click to expand...
Click to collapse
RUU http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
1st flash RUU(it will give you new firmware permanently)
2nd flash any rom with new firmware
Or ....
Download this
http://old.androidfilehost.com/main/-Support_Files-/SuperChilPil/[ICS][2.27][STOCK][8-12]PH98IMG.zip
but don't run it as a PH98IMG just yet, replace the hboot in it from this
http://old.androidfilehost.com/main/-Support_Files-/SuperChilPil/[ICS][2.25][STOCK][5-7]PH98IMG.zip
You will be soft-bricked until you flash a new rom/re-flash your current one.
Thanks guys, appreciate the info. She is going to run the RUU today and probably just go back to newts one xxx for global. She was getting tired fo forgetting to flash the "fix" everytime she updated.
You don't need to RUU if you're s-off, you can flash just the firmware, keep in mind you'll need to reverse the old firmware patch, that's available in the link below too..
http://forum.xda-developers.com/showthread.php?t=1614366
Global would be - [ICS][2.27][STOCK][8-12]PH98IMG.zip, follow the directions in the post to install it.
Back up your rom just to be safe but you should be ok just flashing the combo you want along with the "new" firmware patch.
EDIT - Just realized Snuzzo posted the same thing, it's linked from the XDA post above which has directions in it.