[Q] superuser settings problem - Gen8, Gen9, Gen10 Q&A, Help & Troubleshooting

hi there
new android user
I got an archos 70 internet with 250gb second hand rooted.
I installed a program to enable wifi ad hoc connection but unfortunately broke my wifi settings
now I can not connect via wifi when I'm in a state superuser(I press the option to open my wifi says error and closes).
I did factory reset but unfortunately the problem remains.
when I press vol+ and power says
andoid
developer edition
recavery system
i choose recavery system
recover your system
developer edition menu
flash kermel and initramfs
i choose flash kermel and initramfs and says me
usb connection : please copy a zlimage and an initramfs.cpio.gz,then press ok to disconnect
what should I do???
i dont have a zlimage file or initramfs.cpio.gz file
help me please...

Hi guy.
Which rom do you want install?
If you want to keep archos firmware and have root, install Chulri's kernel. It works like a charm. Just download the kernel (see his post) and unpack it, it calls avosxxxx if my memory is good. Select the kernel correspond to your version of rom.
Try others rom with different kernel and initramfs.cpio.gz, like bull rc2 or urukdroid.
Read the 'how to' it's usefull
Else try recover -> reset android or reformat device AFTER download another rom on archos website ( aos file).
Bizcuite.
Sent from my GT-I9000 ICS using XDA

Thanks for the answer but I don't want to change rom.
i want to fix the rom i already have.
do you know how???
do you mean this rom??
http://forum.xda-developers.com/showthread.php?t=897877

Read the end of my answer. You can reset android system. Search in menu, i have remove archos kernel and uses only sde. i don't remember exactly the name of this menu.
Sent from my GT-I9000 using XDA

Try this:
Backup yours data if you need - all data will be wipe after the reformat device.
Download this:
If you have a 70 first gen:
h_ttp://update.archos.com/8/gen8/gen8_2.4.83/firmware_archos_android_gen8.aos
If you have a 70B froyo version:
h_ttp://update.archos.com/8/gen8v2/gen8v2_2.4.83/firmware_archos_android_gen8.aos
-Go to boot menu (vol up+power)
-enter recovery menu
-format system
-reformat device
** connect the tab to sector and wait the full format **
after the format, it tells you to put the image file on the tab.
Looks your drive and put the AOS file on the drive's tab.
press power to validate after the transfert and the tab reinstall fully the system.
I hope that will help you.
Bizcuite

bizcuite said:
Download this:
If you have a 70 first gen:
h_ttp://update.archos.com/8/gen8/gen8_2.4.83/firmware_archos_android_gen8.aos
Click to expand...
Click to collapse
this is the original archos rom?
i have the problem only when am in ''developer edition''only
when am in andoid everything is ok(But I don t have access as superuser of course)
anyway tnx for your answer
I will try to put another

kumoto said:
this is the original archos rom?
i have the problem only when am in ''developer edition''only
when am in andoid everything is ok(But I don t have access as poweruser of course)
anyway tnx for your answer
I will try to put another
Click to expand...
Click to collapse
Under SDE:
Try to reinstall your wifi app, and reset all cache and uninstall it again.
If it doesn't worked, try to go to /data/app/ and remove the app. Next go to /data/data/ and remove all files in relation with your wifi software. (use rootexplorer or other similar app).
Bizcuite

@kumoto:
Please use the right terms, as you will not get the correct answers.
There is no poweruser, you might mean superuser.
And as you can only be using Chulri's root, you can find the cure in the first post there under the point about the UnionFS.

bizcuite said:
Under SDE:
Try to reinstall your wifi app, and reset all cache and uninstall it again.
Click to expand...
Click to collapse
I have already done
bizcuite said:
If it doesn't worked, try to go to /data/app/ and remove the app. Next go to /data/data/ and remove all files in relation with your wifi software. (use rootexplorer or other similar app).
Bizcuite
Click to expand...
Click to collapse
i will try it this afternoon because now I'm at work
fzelle said:
@kumoto:
Please use the right terms, as you will not get the correct answers.
There is no poweruser, you might mean superuser.
Click to expand...
Click to collapse
I am sorry man you have absolute right

bizcuite said:
Next go to /data/data/ and remove all files in relation with your wifi software. (use rootexplorer or other similar app).
Bizcuite
Click to expand...
Click to collapse
i am going to /data/data but i dont have folder with wifi software...
i have tts, bluetooth, browser, contacts etc... but no wifi...
oups...
i have in /mnt/system/unionfs/system/bin
wpa_supplicant
wpa_supplicant.bc_original_wifiadhocenabler
wpa_supplicant.wifiadhocenabler_is_activated
I had the problem with 'wifi ad hoc enabler' program.
i delete it but nothing happen...

problem solved

How ?
Sent from my GT-I9000 using XDA

just i run avos 2.4.82 and everything is ok now
1000 tnx anyway

Related

[Q] How to install on the ARCHOS 70 (cyanogen mod 7) Chainfire3D ?

Hello, I want to install on my tablet Chainfire3D, but the application can not install the driver (there is no place in the / System). How do I install Chainfire3D?
Hi guy!
Try to repair system in boot menu (vol up+power) or directly in parameters menu. I had this pb and resolve it by full wipe.
Bizcuite
Sent from my GT-I9000 using XDA
I do not fully understand what would have in mind.
I do not fully understand what would have in mind. I have the firmware is in the image, it expands as needed, but he always says that free 0 KB. A program provyaryaet have a place in / and not finding the place, he writes an error.
banzay_pro said:
I do not fully understand what would have in mind. I have the firmware is in the image, it expands as needed, but he always says that free 0 KB. A program provyaryaet have a place in / and not finding the place, he writes an error.
Click to expand...
Click to collapse
Try the newest release http://forum.xda-developers.com/showthread.php?t=1335620 /cache was still in the image file itself and eating memory when installing apps. I now moved it to the data.img which should fix this problem.
divx118
Had the same problem it couldnt install drive, not able to write /system.. i easily fixed it by openin recovery and fixing permissions, it installed no prob after
Sent from my A70H using XDA

HELP!! Signature verification failed w/ non-official Cyanogenmod 10 ROM for Sanei N10

Hello everyone. Let's see if anybody can help me, because I'm pretty stuck with this.
Note: I've already searched high and low for solutions to the "Signature verification failed", but they either don't work or don't apply here.
I've tried to install the following ROM from xda-developers in a Sanei N10:
Unofficial CyanogenMod 10 for many AllWinner A10 tablets
I've installed it following the usual procedure:
- Press Vol+ and Power to get the Recovery menu
- Select Wipe data/factory reset
- Select Wipe cache
- Install the three ZIP files: "cm10_a10_20120913.zip", "gapps-jb-20120726-signed.zip" & "n10_compatibility_1.2.1.zip"
The problem is, even though the first ZIP with the ROM installs successfully, the second one (the one with Google's apps) refuses to install, showing instead the message "signature verification failed". The same happens with the third ZIP (N10 compatibility).
So the installation doesn't actually finish. If I reboot the tablet, it runs Cyanogenmod 10, but the touchscreen doesn't work (I have to plug a USB mouse to interact with the operating system).
So what do I do to avoid the dreaded "signature verification failed" message? Just in case if it's of any help to identify the problem, I'll mention that I can see the Android bot laying down with a red triangle with an exclamation when entering the Recovery menu.
I've tried to use the ROM Manager which is preinstalled with Cyanogenmod 10, but when choosing "Flash ClockworkMod Recovery" it says that "The SD Card needs to be mounted to use ROM Manager". Of course my MicroSD is properly mounted (I can see its files in the card from console, from the "Terminal Emulator"). I think this happens because the MicroSD is mounted in /storage/sdcard1 instead of in /storage/sdcard0, but I can't change that. I can't download APKs from the browser, either, because it also says something similar about not being able to access the SD (even though it's correctly mounted and can see it mounted from Settings > Storage).
I've also tried the CyanogenMod A10 ROM available in this page, which is more recent (October instead of September):
http://www.slatedroid.com/topic/3870...mod-10-tweaks/
But the same happens.
I've even tried installing the CWM Recovery ROM, but it doesn't let me installing that from the Recovery either (same message about the "signature"), and with Odin3 it doesn't work either because I don't know how to reach the "download mode", which is needed for Odin3. Pressing Vol+ and Power I get the Recovery, but not the Download mode. Does anyone know how do I get to the download mode in the Sanei N10?
Any idea about how to solve this? Right now I have a tablet with no touchscreen and not even Google applications (so I don't even have the Play Store), so it's practically worthless (at least the WiFi works). How can I get this tablet back to being usable?
Did you fix this? I want to get this tablet and most likely want to root and rom it but if this is the case...
benny6812 said:
Did you fix this? I want to get this tablet and most likely want to root and rom it but if this is the case...
Click to expand...
Click to collapse
No, unfortunately I still couldn't fix it
There's nobody here in xda-developers who can help me? Surely somebody must know enough to help me find a solution.
I've tried creating a symbolic link from /storage/sdcard1 to /storage/sdcard (it doesn't exist right now), but it just says "link failed Read-only file system" (I was root, by typing "su" and clicking "Allow" in the Superuser window). So, I can't create symbolic links even while being root user? I need this link so ROM Manager can detect my SD Card (it says it's not mounted but it really is, but in "/storage/sdcard1").
Also, the gapps package linked in the ROM page above seems not to be properly signed, even though it has that "-signed" suffix in its name. I always get that "signature verification failed" error message. But now I've tried downloading a more recent gapps package (gapps-jb-20121011-signed.zip) and that package finally worked! BUT, even though it apparently installed successfully, I still can't see any Play Store icon, nor any other Google app (Gmail, etc.). Why? Those icons should appear after installing gapps, shouldn't they? Maybe this newer "gapps" package is somehow incompatible with this tablet? (is this even possible?).
Also, even though I can now install the newer "gapps" package, I still can't install the "n10_compatibility_1.2.1.zip" file (I still get "signature verification failed" for that ZIP), which, I guess, contains the drivers needed for the N10 so the touchscreen works (currently it doesn't, and I have to use a USB mouse to use Android in this tablet). Any ideas? I'm getting tired of trying 9485738489754935627 things with no good result . I guess Android is showing here its Linux roots...
I think the key here is managing to install a new Recovery ROM that doesn't care about signing, but how do I do that? I can't install through ROM Manager because I get that error about the SDCard needing to be mounted to use it (and it's really mounted), and then I can't create the /storage/sdcard symbolic link because I get that "link failed Read-only file system" error. Also, I can't use Odin3 because I can't manage to put this tablet in Download Mode. Aaaargh! There's no good solution
Any ideas?
Bump!
I have same problem, i think that we need a different compatibility file, or perhaps if we could open install any app like Novo7 we could fix it... hope that anyone have the solution.
Yojimbojpr said:
I have same problem, i think that we need a different compatibility file, or perhaps if we could open install any app like Novo7 we could fix it... hope that anyone have the solution.
Click to expand...
Click to collapse
Thanks for replying. If we could find some way to install a new Recovery, then we'd probably by able to get the N10 Compatibility file working. This can't be that hard to do, but I've tried lots of things, and none of them worked...
Anyone?
Please, someone help!
Bump!
No ideas?
Please, I'm getting desperate
sanei
OMA2k said:
No ideas?
Click to expand...
Click to collapse
same problem here....
jamjamjan said:
same problem here....
Click to expand...
Click to collapse
Please let me know if you find a solution to this. Thanks!
I'm having the same issue with [ROM][CM10/10.1][21 Dec] Codename Lungo
Well, at last I could finally solve the problem thanks to chris5s from this forum.
These are the steps that worked for me:
1. Download the latest ClockWorkMod for Allwinner A10 tablets from here:
http://forum.xda-developers.com/showthread.php?t=1802268
2. Put all three files in the ZIP inside the root of a MicroSD card and insert it in the tablet
3. Check from the Terminal app inside the tablet to see if the MicroSD card is mounted in /sdcard (just type "ls /sdcard").
4. If the "ls" command doesn't show anything (that's what happened in my case), then you must modify the "install-recovery.sh" file and replace all instances of "/sdcard" with "/mnt/extsd".
5. With the proper "install-recovery.sh" file, run the commands specified in the above xda link (in my case the card is in "/mnt/extsd" instead of "/mnt/sdcard" as the original example shows):
su
cd /mnt/extsd
sh install-recovery.sh
sh reboot-recovery.sh
6. The tablet will then reboot to CWM recovery. Then follow the regular steps to install Cyanogenmod (wipe plus install ROM + GApps + Compatibility). This time the Recovery menu won't care about the files being unsigned and will install them right away!
I hope this helps somebody else!
hey i just registered because i have been having the same exact problem i read that you fixed it but how can i get in to the tablet if im not able to do any movements after it boots ???
please any help would be appreciated
Download the file again, and try again
Sent from my GT-N7000 using xda app-developers app
Thatgrass said:
Download the file again, and try again
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i did i just dont know how to get in to the terminal app
ok so im in the terminal app but what do you mean by modify the install sh file ???
Hello "lesanei"
I just noticed your posts. Let's see if I can help you...
The touchscreen doesn't work because the appropriate drivers were not installed (because of the "signature verification failed" issue). So you need to connect a USB mouse (and preferably a keyboard too) to the tablet. The Sanei N10 should come with a USB to micro-USB adapter. If you don't have it, you can buy it for cheap here.
Since there is only the one USB input in the tablet, you can't connect two USB devices at the same time. What I did use is a wireless mouse+keyboard combo which only needed one USB dongle for reception. If you don't have that, you can just connect a USB mouse and type with the on-screen-keyboard using the mouse. It's annoying, but it works
When I say "modify the install-recovery.sh file", I mean the file inside "cwm_recovery_6.0.1.2_a10.zip". You can modify it from your PC if you prefer. You don't have to do it in the tablet if you don't know how to use the "vi" editor (command line editor). Just open the "install-recovery.sh" file in Wordpad (do not use the Notepad, because it doesn't support Unix line endings so it shows the file incorrectly) and replace all instances of "/sdcard" with "/mnt/extsd". So the file contents should look like this:
#!/system/bin/sh
if busybox test ! -f /mnt/extsd/recovery.img; then
echo no /mnt/extsd/recovery.img
exit 1
fi
cat /mnt/extsd/recovery.img > /dev/block/nandg
sync; sync; sync
echo done
Click to expand...
Click to collapse
Then place all three files ("recovery.img", "install-recovery.sh" and "reboot-recovery.sh") into your MicroSD card. Then safely extract it from your PC, insert it in the tablet and type this from the Terminal:
su
cd /mnt/extsd
sh install-recovery.sh
sh reboot-recovery.sh
Click to expand...
Click to collapse
Then follow the regular steps to install Cyanogenmod and this time all files should install sucessfully, so when rebooting, touchscreen and everything else will work.
Let me know if it works for you.

[Q] can't get token id on htc desire x

hi guys, i'm new in this forum, and i'm new to android too, i just bought a htc desire x and want it to be root, but i have problem when trying to get token id in hasoon2000 HTC Desire X All-In-One Toolkit V2.0 [1-1-2013], it says C:\ Document is not recognized as an internal or external command openable program or batch file.
usb debugging is already connected, please any one kindly fixing my problem, thx
sorry for my bad english. btw i'm from indonesia
Did you follow these steps?
How To Use. THIS IS FOR THE PC ONLY. No plans ever for Mac or Linux. Sorry.
1. Download the toolkit DO NOT RENAME THE FOLDER
2. Download Winrar from here. Install it after you download it
3. Extract the folder anywhere.
4. Run the program.
thx for replying so quick, after i downloaded then i extract to desktop and just run the program by clicking the symbol written as desire, am i doing it right?
Try to unpack it somewhere else on a root of some partition of your PC, try to unpack it to non system partition.
ok thx, i'll try it tomorrow, i'm sorry i've to go home coz it's 11.41pm already in my town, and i'm still on friend's house.
thx anyway for your reply, i'll let you know the progress
hi nlooooo, i did what u told me to do and it worked, i unpacked to (Cdrive, but another problem came on my device when i clicked get token id.
here is the picture shows the problem
@nlooooo.....i just tried your way on rooting this device, and same problem came up on step 8 when getting token id, still it says C:\ Document is not recognized as an internal or external command openable program or batch file, i've found out my device still locked, is it because of the device still lock? here's the image shown
problem solved
hi nlooooo......i've rooted my device, just try to put all the downloaded file to C:drive, and followed your tutorial on your thread, and i succeeded, at least i saw superuser on my device, thx alot for your tutorial.
No problem, that's why we're here. If you see it then it should be it. Try to install some app that requires root privileges (Titanium Backup for ex) and see if it can get SU rights.
hi.....any recommendation of apps or what to do after this rooting? cos i really a noob in android and root things. thx
uso_diario said:
hi.....any recommendation of apps or what to do after this rooting? cos i really a noob in android and root things. thx
Click to expand...
Click to collapse
Yeah install AdFree, and get rid of the ads
ayyu3m said:
Yeah install AdFree, and get rid of the ads
Click to expand...
Click to collapse
Well, it works for me with wifi but not with mobile data, it's configured over APN IP.
nlooooo.....sorry to bother you again, but i think my dx still not rooted, cos when i installed titanium backup root it comes like this, what do i hv to do?
ayyu3m said:
Yeah install AdFree, and get rid of the ads
Click to expand...
Click to collapse
heyyy........thank you
uso_diario said:
nlooooo.....sorry to bother you again, but i think my dx still not rooted, cos when i installed titanium backup root it comes like this, what do i hv to do?
Click to expand...
Click to collapse
Go and open Superuser app, swipe to first screen and see if the binary is installed. Then go and clear data for Titanium and open it again.
If you still have the problem use some root explorer to check folder system/bin if there is a file named su.
nlooooo said:
Go and open Superuser app, swipe to first screen and see if the binary is installed. Then go and clear data for Titanium and open it again.
If you still have the problem use some root explorer to check folder system/bin if there is a file named su.[/QUOTyes..there is binary installed, but it says outdated binary notification ticked
Click to expand...
Click to collapse
That's ok it should be like that. For me Titanium is working fine I have no problems.
nlooooo said:
That's ok it should be like that. For me Titanium is working fine I have no problems.
Click to expand...
Click to collapse
hi nlooooo........finally i got it fixed by start it all over again today........i'm new in this forum, don't know whether i can click your thanks button or not, but i will try it anyway, thx a lot
ps: i think it clicked
uso_diario said:
hi nlooooo, i did what u told me to do and it worked, i unpacked to (Cdrive, but another problem came on my device when i clicked get token id.
here is the picture shows the problem
Click to expand...
Click to collapse
I've got the same screen too, nothing is happening. What did you do to make it work?
i am getting stuck at last step i am always getting this message sending 'unlocktoken' (0kb) .
i have not installed htc sync app but just directly installed the drivers for unlocking purpose.
the boot loader is recognizing the usb connection as Fastboot usb.
using windows 7 32 bit operating system.
tried putting the unlock_code in c drive and desktop but it doesnt work.
the file is just a 1kb file.
the default view is shown as a vlc player file.
any help will much appreciated. this is my 1st htc mobile and am not used to this kind of rooting. previously owned a samsung so was using odin a lot.

[Q] GOCLEVER TAB T76GPS TV = CWM exclamation mark in red triangle + How root?

Helloo all,
im stuck. I want root my tablet, but its for me impossible!
I have some experience with root on HTC D2, SGS 2 but here its difference.
I try go to CWM with - Volume and Power button. Its load but im stuck = i have green android with red exclamation mark and i cant go to menu CWM. I Have Android from GoClever 4.0.3, Core 3.0.8 from fabric. I cant go to cwm, i cant make root.
So i have 2 questions:
1) How fix CWM to open?
2) How root this tablet?
I search about 2 hours in this Forum, but i search only for different tablets, and i im not sure if are for my tablet.
Is this topic for my solution? = http://forum.xda-developers.com/showthread.php?t=1378594
Or this ? http://forum.xda-developers.com/showthread.php?t=1576937
Thank you for anny tip, help!
Its possible thats CWM are locked from fabric GoClever?
Pleas show me the right way, im desperate
how u try with super one click mod version to root it
i have rooted my I10 tab with that program
Finally! I root Tablet. I use "Mr.Tasselhof Root Script by ivanz 03-18-2012".
I wrote install plan tomorrow for other people!
I create instruction for install Root + install CWM + install Rom Alien RC2
Instruction are in Czech language = use Google Translate. If its translate problem, let me know i translate to EN.
Code:
http://mrpierc.jecool.net/blog/goclever-tab-t76gps-tv-navod-na-root-a-instalaci-custom-rom
MrPierc said:
I create instruction for install Root + install CWM + install Rom Alien RC2
Instruction are in Czech language = use Google Translate. If its translate problem, let me know i translate to EN.
Code:
http://mrpierc.jecool.net/blog/goclever-tab-t76gps-tv-navod-na-root-a-instalaci-custom-rom
Click to expand...
Click to collapse
please write in english (dont use google translate... is confusing)... i need recovery for bootloop and red triangle... cant copy files to internal memory..
i tried from sdcard but after all steps get this error
dxdy said:
please write in english (dont use google translate... is confusing)... i need recovery for bootloop and red triangle... cant copy files to internal memory..
i tried from sdcard but after all steps get this error
Click to expand...
Click to collapse
Hi,
you make root before installation on your tablet?
I make EN translate for you ASAP.
MrPierc said:
Hi,
you make root before installation on your tablet?
I make EN translate for you ASAP.
Click to expand...
Click to collapse
look, i make root week ago (nothing else).... today problem started... i dont do anything.... surfed on facebook and turned off tablet.... later after turning on problem started and red triangle shown...
i tried also original update.zip but same problem...
dxdy said:
look, i make root week ago (nothing else).... today problem started... i dont do anything.... surfed on facebook and turned off tablet.... later after turning on problem started and red triangle shown...
i tried also original update.zip but same problem...
Click to expand...
Click to collapse
Hmm on my blog wrote 1 user that he have exactly same problem but he didnt make ROOT. He have Custom Rom from GoClever and he cant start Tablet. He cant go to CWM. He can go only to Download Mode.
So its weird Trap. For flashing Stock Rom from GoClever u must copy Stock Rom to internal SD but in this problem u cant go to ISD. The Solution its maybe creating tar.md5 and flash via Odin. But how make this i cant help.
I create Topic for this problem but nobody reply: http://forum.xda-developers.com/showthread.php?t=2341081
Want you still the Instruction in EN?
no need for instructions because cant do anything with that... ok... seems i can play Frisbee with tablet now... doubt service will accept guaranty...
dxdy said:
no need for instructions because cant do anything with that... ok... seems i can play Frisbee with tablet now... doubt service will accept guaranty...
Click to expand...
Click to collapse
I'm sorry, but i cant do anything for you. Most people make root with my Instructions and Tablet works. I wish i have more knowledge, but i havent. Maybe some specialist in this Forum help and give us solution...
MrPierc said:
I'm sorry, but i cant do anything for you. Most people make root with my Instructions and Tablet works. I wish i have more knowledge, but i havent. Maybe some specialist in this Forum help and give us solution...
Click to expand...
Click to collapse
possible i found something to copy files to internal storage:
can mount external sdcard to read it in Aroma Filemanager
but still cant mount internal storage (get error)
dxdy said:
possible i found something to copy files to internal storage:
can mount external sdcard to read it in Aroma Filemanager
but still cant mount internal storage (get error)
Click to expand...
Click to collapse
Its only my feeling but maybe help change install another CWM...
Its really only feeling but maybe TWRP, Phillz etc...
But its only my Fantasy...
Hello
can you put Instruction in EN I have that tablet and want to root it
thanx
Tomyslav said:
Hello
can you put Instruction in EN I have that tablet and want to root it
thanx
Click to expand...
Click to collapse
dont play with it... i see on some polish forum many have problem like me after rooted... lucky me i got new tablet because service accept warranty for tablet....
btw... on my new tablet i notice can with lucky patcher to install hosts file for blocking adds (seems not locked completely)
MrPierc said:
I create instruction for install Root + install CWM + install Rom Alien RC2
Instruction are in Czech language = use Google Translate. If its translate problem, let me know i translate to EN.
Code:
http://mrpierc.jecool.net/blog/goclever-tab-t76gps-tv-navod-na-root-a-instalaci-custom-rom
Click to expand...
Click to collapse
Thank you for the info
Sent from my B1-730HD using XDA Free mobile app

Root SHV-E220S Android v4.4.4 PDA: E220SKSU0CNL2

Hi
As you may know, after almost a year an update is released for SHV-E220S. Because this phone is limited to SKT Carrier in Korea, nobody cares about it. But do not be afraid. Here I am ready to help you root your updated phone.
I don't know why but any of the conventional methods don't work on the SHV-E220S. Believe me, I tried vRoot, Towelroot, z4root, Framaroot, CF-Auto-Root, etc. with no success. But the following method works like a charm.
Before beginning, I should thank the "www.sayanogen.com" guy who provided the custom ClockworkMod recovery called SH. So thank you man!
Requirements: SHV-E220S, SD Card, ODIN
1. First of all, because you can't normally, i.e. without root permissions, access the SD card via file managers in the to-be-upgraded Android 4.4.4, you need to download the "UPDATE-SuperSU-v2.40.zip" from the following link which contains "SuperSU" binary files made by Chainfire and put it on your "SD card" before upgrading.
- Don't put the file on your "Phone Memory" because CWM recovery can't access it.
- Do not extract the file. Put the ".zip" file, as is, on your SD card.
http://download.chainfire.eu/641/SuperSU/
2. After finishing the file transfer, you need to update your phone to the latest firmware which is currently E220SKSU0CNL2 Rom. You can use OTA, Kies, or ODIN method. Feel free to use your favorite method. For ODIN, you should download the following file from SamMobile page and update your phone via the instructions specified in that page.
http://www.sammobile.com/firmwares/download/40233/E220SKSU0CNL2_E220SSKT0CNL2_SKT.zip
3. After you have upgraded your phone using ODIN, restart the phone and let it do its work. After the phone finished upgrading, reboot again into download mode by pressing and holding Volume Down + Home + Power, followed by Volume Up and load the "GalaxyPOP_CWM_SH", from the attachment, into "AP / PDA" section of ODIN window and Hit "start".
4. Now you have CWM recovery on your device. Enter Recovery by holding "Volume Up + Home + Power" buttons. Select "Install zip from SD Card" and load "UPDATE-SuperSU-v2.40.zip" file.
5. Well Done :good: You've just successfully rooted your phone.
6. Press the "Thanks!" button .
Thanks So Much
Thanks @whoknowshimself I just rooted and updated my phone as you've described above. Thanks fit the effort
yeah, it works fine. i want to know about ROM for this device, which one is suitable working fine and light weight?
thanks very much to help ROOT
whoknowshimself said:
Hi
As you may know, after almost a year an update is released for SHV-E220S. Because this phone is limited to SKT Carrier in Korea, nobody cares about it. But do not be afraid. Here I am ready to help you root your updated phone.
I don't know why but any of the conventional methods don't work on the SHV-E220S. Believe me, I tried vRoot, Towelroot, z4root, Framaroot, CF-Auto-Root, etc. with no success. But the following method works like a charm.
Before beginning, I should thank the "www.sayanogen.com" guy who provided the custom ClockworkMod recovery called SH. So thank you man!
Requirements: SHV-E220S, SD Card, ODIN
1. First of all, because you can't normally, i.e. without root permissions, access the SD card via file managers in the to-be-upgraded Android 4.4.4, you need to download the "UPDATE-SuperSU-v2.40.zip" from the following link which contains "SuperSU" binary files made by Chainfire and put it on your "SD card" before upgrading.
- Don't put the file on your "Phone Memory" because CWM recovery can't access it.
- Do not extract the file. Put the ".zip" file, as is, on your SD card.
http://download.chainfire.eu/641/SuperSU/
2. After finishing the file transfer, you need to update your phone to the latest firmware which is currently E220SKSU0CNL2 Rom. You can use OTA, Kies, or ODIN method. Feel free to use your favorite method. For ODIN, you should download the following file from SamMobile page and update your phone via the instructions specified in that page.
http://www.sammobile.com/firmwares/download/40233/E220SKSU0CNL2_E220SSKT0CNL2_SKT.zip
3. After you have upgraded your phone using ODIN, restart the phone and let it do its work. After the phone finished upgrading, reboot again into download mode by pressing and holding Volume Down + Home + Power, followed by Volume Up and load the "GalaxyPOP_CWM_SH", from the attachment, into "AP / PDA" section of ODIN window and Hit "start".
4. Now you have CWM recovery on your device. Enter Recovery by holding "Volume Up + Home + Power" buttons. Select "Install zip from SD Card" and load "UPDATE-SuperSU-v2.40.zip" file.
5. Well Done :good: You just successfully rooted your phone.
Click to expand...
Click to collapse
hi,
is there any light weight and suitable ROM for this device. I saw in Storage there is mentioned
System Memory
The minimum amount of storage space required to run the system
4.46 GB
i have only 8 GB of storage (although i have 16 GB SD Card).
thanks for helping us
whoknowshimself said:
Hi
As you may know, after almost a year an update is released for SHV-E220S. Because this phone is limited to SKT Carrier in Korea, nobody cares about it. But do not be afraid. Here I am ready to help you root your updated phone.
I don't know why but any of the conventional methods don't work on the SHV-E220S. Believe me, I tried vRoot, Towelroot, z4root, Framaroot, CF-Auto-Root, etc. with no success. But the following method works like a charm.
Before beginning, I should thank the "www.sayanogen.com" guy who provided the custom ClockworkMod recovery called SH. So thank you man!
Requirements: SHV-E220S, SD Card, ODIN
1. First of all, because you can't normally, i.e. without root permissions, access the SD card via file managers in the to-be-upgraded Android 4.4.4, you need to download the "UPDATE-SuperSU-v2.40.zip" from the following link which contains "SuperSU" binary files made by Chainfire and put it on your "SD card" before upgrading.
- Don't put the file on your "Phone Memory" because CWM recovery can't access it.
- Do not extract the file. Put the ".zip" file, as is, on your SD card.
http://download.chainfire.eu/641/SuperSU/
2. After finishing the file transfer, you need to update your phone to the latest firmware which is currently E220SKSU0CNL2 Rom. You can use OTA, Kies, or ODIN method. Feel free to use your favorite method. For ODIN, you should download the following file from SamMobile page and update your phone via the instructions specified in that page.
http://www.sammobile.com/firmwares/download/40233/E220SKSU0CNL2_E220SSKT0CNL2_SKT.zip
3. After you have upgraded your phone using ODIN, restart the phone and let it do its work. After the phone finished upgrading, reboot again into download mode by pressing and holding Volume Down + Home + Power, followed by Volume Up and load the "GalaxyPOP_CWM_SH", from the attachment, into "AP / PDA" section of ODIN window and Hit "start".
4. Now you have CWM recovery on your device. Enter Recovery by holding "Volume Up + Home + Power" buttons. Select "Install zip from SD Card" and load "UPDATE-SuperSU-v2.40.zip" file.
5. Well Done :good: You've just successfully rooted your phone.
6. Press the "Thanks!" button .
Click to expand...
Click to collapse
i just did experiments like removing korean dialer and it works! i just flashed it
refer to this thread..
http://forum.xda-developers.com/galaxy-s3/general/4-4-4-s3-shv-e210ssamsung-knox-korean-t2907294
can somebody help us on making OFFICIAL thread for this Device? for further improvements please.. thanks alot!
jhayke22 said:
i just did experiments like removing korean dialer and it works! i just flashed it
refer to this thread..
http://forum.xda-developers.com/galaxy-s3/general/4-4-4-s3-shv-e210ssamsung-knox-korean-t2907294
can somebody help us on making OFFICIAL thread for this Device? for further improvements please.. thanks alot!
Click to expand...
Click to collapse
as i mentioned i have upgraded to 4.4.4 and Rooted as instructed, but facing a problem, at home i and my wife using same network SIM, when i am trying to call someone, it is showing error " emergency calls only ... " but on my wifes phone i can make calls successfully...
any help ? in previous version 4.1.2, there were no problem making calls.
regards.
oralover2006 said:
as i mentioned i have upgraded to 4.4.4 and Rooted as instructed, but facing a problem, at home i and my wife using same network SIM, when i am trying to call someone, it is showing error " emergency calls only ... " but on my wifes phone i can make calls successfully...
any help ? in previous version 4.1.2, there were no problem making calls.
regards.
Click to expand...
Click to collapse
TRY it at your own risks
seems odd. but you can also try to manipulate network modes in SKT menus using codes
in dialer
319712358
password
996412
change settings to its default like Full/Auto etc.
OR YOU CAN ALSO TRY (if rooted) using root explorer
navigate
/system/csc
on that folder edit "sales_code.dat" something like that.. and change 'SKT' to blank or nothing else just erase the "SKT"..
save it..reboot
there on settings/more networks/mobile networks
you'll have mobile network mode.. select GSM only for better signals for CALLs and SMS..
select "WCDMA" for 3G mobile data... but you will lose 'LTE'
better off you have Firmware Backups..
hope it helps.
sorry im not that good in english
jhayke22 said:
TRY it at your own risks
seems odd. but you can also try to manipulate network modes in SKT menus using codes
in dialer
319712358
password
996412
change settings to its default like Full/Auto etc.
OR YOU CAN ALSO TRY (if rooted) using root explorer
navigate
/system/csc
on that folder edit "sales_code.dat" something like that.. and change 'SKT' to blank or nothing else just erase the "SKT"..
save it..reboot
there on settings/more networks/mobile networks
you'll have mobile network mode.. select GSM only for better signals for CALLs and SMS..
select "WCDMA" for 3G mobile data... but you will lose 'LTE'
better off you have Firmware Backups..
hope it helps.
sorry im not that good in english
Click to expand...
Click to collapse
thanks a lot friend, you are much appreciated
I will try and give feed back. ( if no risk, nobody can go ahead )
regards.
oralover2006 said:
thanks a lot friend, you are much appreciated
I will try and give feed back. ( if no risk, nobody can go ahead )
regards.
Click to expand...
Click to collapse
i like that spirit.! ehehe
"if no risk, nobody can go ahead"
welcome..!
jhayke22 said:
i like that spirit.! ehehe
"if no risk, nobody can go ahead"
welcome..!
Click to expand...
Click to collapse
sorry, i failed to find "vi" or "nano" editor? which editor i can use to edit the said file.
regards.
Edited: just find out about Busybox and installed it.
you can edit the said file using rootexplorer app..
Sent from my GT-I9260 using XDA Premium 4 mobile app
jhayke22 said:
TRY it at your own risks
seems odd. but you can also try to manipulate network modes in SKT menus using codes
in dialer
319712358
password
996412
change settings to its default like Full/Auto etc.
OR YOU CAN ALSO TRY (if rooted) using root explorer
navigate
/system/csc
on that folder edit "sales_code.dat" something like that.. and change 'SKT' to blank or nothing else just erase the "SKT"..
save it..reboot
there on settings/more networks/mobile networks
you'll have mobile network mode.. select GSM only for better signals for CALLs and SMS..
select "WCDMA" for 3G mobile data... but you will lose 'LTE'
better off you have Firmware Backups..
hope it helps.
sorry im not that good in english
Click to expand...
Click to collapse
its working perfect :good: thanks very much. i followed below to remount filesystem in read / write mode and edit sales_code.dat file and reboot.
su
mount -o remount,rw /system /system
regards.
Plz help me,,,
Before I start, I appreciate to your method to root my phone. But I got a problem here. After rooting everything seems to work well but my vibration seems to not work in any situation even though my vibrate level is max. If someone knows about this problem than plz help me. If no-one knows, than please be kind to tell me how to unroot this phone

Categories

Resources