So, because i am new i cannot post anything to DEFY development thread (ICS thread to be more precise).
So i am asking here 2 questions: 1) I downloaded new Eppys build
(16042012) and i transfered it to romupdater map and updated it with romupdater. Is this good way..or i should make full flash?
2) What is the changelog for 16042012 version, adn why flash is not working?
Thank You!
Admin or Mod close this thread!
Sent from my MB525 using xda app-developers app
Related
Hi guys, sorry for my english, but i've a big problem; i buyed a new atrix 4g in italy with 2.3.4 and i've rooted it but i wasn't able to unlocked it. So i put by rsd lite this firmware OLYEM_U4_4.3.3_SIGNED_USAOLYPRTES_P029_A002_M001_HWolympus_1g_Service1FF.sbf.gz.sbf.gz.sbf
but isn't unlocked too!!!
i would like to unlock this phone ant put the new pure blur rom.
please help me!!!
I also am from Italy. Where did you get the phone?
Why are you posting this in the development section?
Sent from my MB860 using Tapatalk
Because i want unlock and put a new rom. I buyed at Aosta, Euronics.
Sent from my MB860 using Tapatalk
This, is a question. Guess which section this belongs in? Q&A! That stands for Questions. And. Answers.
ok,sorry. it is possible to change room?
if its gingerbread you dont need to unlock it.. just run clockwork. I have a bell atrix with the 2.3.4 update and i didnt have to unlock but yet i flashed a rom and installed custom recovery.
If that^ isn't it, did you run the faarboot oem unlock command in faatboot yet?
Sent from my CM860
The android XDA app needs a report button.... Could a mod please move this thread to the appropriate Q&A section?
The development section is for development purposes like for developers that create new roms and maintain them. The Q&A area is for question like yours.
Sent from my MB860 using XDA App
crossix said:
The android XDA app needs a report button.... Could a mod please move this thread to the appropriate Q&A section?
The development section is for development purposes like for developers that create new roms and maintain them. The Q&A area is for question like yours.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
since the XDA app is built off tapatalk, just tap on the offending post, click MORE, and report
Hi everybody, this tread is right for my phone.
I have an Atrix I-TIM branded with Android 2.2.2, no updates expected from TIM, tried this method to unlock it : http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader, but don't work.
I've root and recovery yet on and need to unlock bootloader to flash CM7 or other Roms.
Thanks for any advice here.
Pirateghost said:
since the XDA app is built off tapatalk, just tap on the offending post, click MORE, and report
Click to expand...
Click to collapse
It is based off tapatalk, but doesn't have all of its features including the report option
Sent from my MB860 using XDA App
Jack'O said:
Hi everybody, this tread is right for my phone.
I have an Atrix I-TIM branded with Android 2.2.2, no updates expected from TIM, tried this method to unlock it : http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader, but don't work.
I've root and recovery yet on and need to unlock bootloader to flash CM7 or other Roms.
Thanks for any advice.
Click to expand...
Click to collapse
no. this 'tread' is not right for your phone. this 'tread' is in the wrong section. if you have a problem with your phone, do a search and find a similar problem and fix it. once you have exhausted all searches, then you can create a new thread in the Q&A section....
Ok, Iwill do, but mind that this tread isn't closed and you can move it to the right section!
New tread here
Metalshadowx2 said:
if its gingerbread you dont need to unlock it.. just run clockwork. I have a bell atrix with the 2.3.4 update and i didnt have to unlock but yet i flashed a rom and installed custom recovery.
Click to expand...
Click to collapse
that is not true?
to install a custom recovery you need to unlock the bootloader... that is the whole point of unlocking... unless you have some weird atrix...
I extracted only the multi dpi applications that were modified in the original alpha 1 ICS rom by DAGr8 to create alpha 2. This is so people that have alpha 1 don't need to reflash the entire rom to get the multi DPI stuff.
Flash with CWM.
http://dl.dropbox.com/u/2974671/i717_multidpi.zip
WOW
Sent from my SAMSUNG-SGH-I717 using xda premium
jjc5891 said:
I extracted only the multi dpi applications that were modified in the original alpha 1 ICS rom by DAGr8 to create alpha 2. This is so people that have alpha 1 don't need to reflash the entire rom to get the multi DPI stuff.
Flash with CWM.
http://dl.dropbox.com/u/2974671/i717_multidpi.zip
Click to expand...
Click to collapse
ok . thx for that
not sure this deserves its own development thread , make sure you took the dpi fix zip aswell , since some app did break dpi in the alpha2 build .
Yes the dpi fix is in there so if you put it in your thread I can ask a mod to close this.
Sent from my SAMSUNG-SGH-I717 using xda premium
forgive a noob for asking but what does this do. I have my phone rooted and the recently released ICS. should I flash this. Was there an ICS version 2 released?
Moved to Proper Forum
Hi,
My daughter has the HP touchpad, I've already loaded CM7 using moboot method so she keeps webos. I can see now that many stable versions of CM9 exist and want to upgrade to one of the many ROMs available. Can I do this straight from clockwork mod or do I need to flash additional zip files in order for it to work properly. I have searched lots of forums and some are suggesting to use acme installer 2 but I have titanium backup so cannot see the point in this method. Any help is much appreciated.
Sent from my A500 using xda app-developers app
wemxm10 said:
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
Err what's the question .
Q:can I upgrade to CM9 from CM7 through clockwork recovery?
A:don't remember where I saw it but I do remember that it could not flash properly and result in bugs....
So its best to do a clean install using ur PC and following this
http://www.webosnation.com/how-install-cyanogenmod-9-android-your-touchpad
Sent from my cm_tenderloin using xda app-developers app
Look for a video from reverend kyle on youtube, its a pretty good explanation and tells you the files you need. The CM9 build will be outdated in the video so just use the latest gapps and CM9 build. Everything else will be the same. Basically you'll need to use you computer and ACMEInstaller2. If you ever want to install CM10 you'll want to use ACMEInstaller3.
Many thanks for the responses, I will see how I get on.
Sent from my A500 using xda app-developers app
Might want to consider what was posted above, skip cm9, use acme uninstaller to start clean, then acmeinstaller3 and put one of the jellybean builds on.
JB takes up more system space, which acmeinstaller3 provides
Sent from my ThunderBolt using xda premium
Hey guys I'm just wondering which rom for the streak 5 you all consider to be "best" ,smoothest, fastest. I'm using longhorn 2.9.3 and I like it but its also my first so I'm feeling antsy to try a different one.
Sent from my Dell Streak using xda app-developers app
DSC. It's the only Gingerbread ROM, other than stock Olleh, that has a working camera zoom. It's also the only Streak ROM still being maintained.
Yes I was actually just browsing the DSC thread. Can it be easily flashed over longhorn 2.9.3?
Sent from my Dell Streak using xda app-developers app
While this information can be found in the first post of the DSC thread, you have to do two factory resets for a successful install of DSC. One of them is Option 1 in the stock Dell menu you see when you access the recovery. The other is the factory reset option in Streakmod.
Okay, and I have to flash the 1.0 before I can update to the 2.3.3? And do I have yo use pdroid (I've not used it) with DSC.
Sent from my Dell Streak using xda app-developers app
Just flash the v2.0 and then the v2.3 over it.
You don't have to use PDroid, but as there is no con to it and the pro is too damn high, why not use it by choice?
If you choose to, then flash v2.0 first, then the PDroid-patch, then v2.3 for PDroid (not the normal one).
Thanks for that reply ill need to look into pdroid before I use it I don't even know what it is. Ill most likely he flashing tonight. Any tips for DSC?
Sent from my Dell Streak using xda app-developers app
Edit: After searching the forums i cant find any information on pdroid for streak. could someone link a thread (if there is one) please
TokyoBunny said:
Edit: After searching the forums i cant find any information on pdroid for streak. could someone link a thread (if there is one) please
Click to expand...
Click to collapse
scratch the edit i found the app on the playstore..i thought it was something that needed to be flashed...
so i do the "Flash me first" then the 2.0 and the 2.3.3 with pdroid and wipe caches and im done?
putting my ds5 on the charger now will flash shortly
i know i keep spamming my own thread but i dont want to make another thread.
do i need to flash the 2.0 PDroid and the 2.3 PDroid provided in the DSC [intl] thread
The PDroid app can only be used if you have flashed the PDroid Patch.
1. Flash the normal DSC v2.0
2. Flash the PDroid patch for v2.0
3. Flash the DSC v.2.3 for Pdroid users (not the normal one)
4. Install the PDroid app you found in the Play Store
All the Zip-files I just mentioned can be found in the original DSC thread
I don't know when wiping cache is necessary, but wiping before every step you flash something shouldn't be too wrong
Mods can delete this thread.
Thanks for the help guys!
Sent from my Dell Streak using xda app-developers app
TokyoBunny said:
Mods can delete this thread.
Thanks for the help guys!
Sent from my Dell Streak using xda app-developers app
Click to expand...
Click to collapse
Please don't!
Or transfer here http://forum.xda-developers.com/showthread.php?t=2255894
I am happy with the recommendations regarding which ROM to flash, so it should stay if you don't mind...
I have a Droid Razr Xt912 with SS 3.1.1 installed. i was wondering can I install Pac v4.0 and if so ho do i go about doing that?
flash it on slot 2 flash ROM first then gapps
There's a pretty extensive thread under the Development forum. Just look at the first post and follow the directions from surdu EXACTLY. He's detailed very well what to do & how to do it. Good luck, it's a fantastic ROM. After that, check out the JBX Hybrid kernel by dtrail1.
In the forum it says to download a Google gapps but when I searched for it on the site there were 9 different ones which one should I use?
Sent from my DROID RAZR using xda app-developers app
seand88 said:
In the forum it says to download a Google gapps but when I searched for it on the site there were 9 different ones which one should I use?
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Hello there,it says in OP:
* download and install Gogle Gapps 20130301
So you should look for that file among the others when you click on that link,should be somewhere in the middle,cheers!
Sent from my XT910 using xda premium