i have sony ericsson live with walkman
with unlocked boot loader
i tried to install custom roms on my phone
i installed custom kernels like coconut and rage
and installed roms such as hybrom or ics port
after wipe and installation i reset the phone and it stucks at sony ercsson logo
which part i do wrong? how can i install custom roms?
i searched some threads and followed the instruction but nothing changed
puya1987 said:
i have sony ericsson live with walkman
with unlocked boot loader
i tried to install custom roms on my phone
i installed custom kernels like coconut and rage
and installed roms such as hybrom or ics port
after wipe and installation i reset the phone and it stucks at sony ercsson logo
which part i do wrong? how can i install custom roms?
i searched some threads and followed the instruction but nothing changed
Click to expand...
Click to collapse
Some kernels work only with some ROMs.
CM ROMs work only with CM kernels.
Hybrom works only with stock based kernels(Rage, X Kernel).
If you want to install another custom ROM, you also need to install another kernel.
Wipe data/reset den install Kernel compatible with yur phone den install via CWM..... just get a kernel dat has CWM to save stress!
yeaaaaaaah the correct kernel and the correct rom work great together
thanks for your response
puya1987 said:
yeaaaaaaah the correct kernel and the correct rom work great together
thanks for your response
Click to expand...
Click to collapse
enjoy buddy........!
Related
hi all,
i am very big trouble.....
i had stock rom installed on my x10i.....after reading a lot about ThGo2 v17.0 rom i decided to install it (not the first rom i installed).....
after following all the steps i.e
1. flashing the th_kernel provided
2. booting to xrecovery and installing the custom rom provided and addons....
the phone did start but was very laggy so i decided to shift to stock kernel and flashed it using flashtool but the flashtool got stuck at 2% and said aborting flash...
so i disconnected the phone and now i am not able to flash any firmware or kernel
plz help as soons as possible
update...
just found out that thGo2 rom made my device xperia arc aka i was in the about phone setting in my rom and found that the phone is not listed as x10i as it should be... it is listed as s0-01c aka xperia arc
rohit25 said:
hi all,
i am very big trouble.....
i had stock rom installed on my x10i.....after reading a lot about ThGo2 v17.0 rom i decided to install it (not the first rom i installed).....
after following all the steps i.e
1. flashing the th_kernel provided
2. booting to xrecovery and installing the custom rom provided and addons....
the phone did start but was very laggy so i decided to shift to stock kernel and flashed it using flashtool but the flashtool got stuck at 2% and said aborting flash...
so i disconnected the phone and now i am not able to flash any firmware or kernel
plz help as soons as possible
Click to expand...
Click to collapse
Cant you enter into flashmode????
Question
Need More details:
1)Locked or Unlocked Bootloader?
2)Which stock kernel you flashed? Downloaded from?
3)[If Locked Bootloader] Can you enter xrecovery? If can, make full wipe, clear cache partition, install new ROM via "install custom zip from SDcard.
4)[If Unlocked Bootloader] Try flash some custom Kernel for Unlocked bootloader like DooMKernel, see whether it reach recovery mode or not.
Sincerely,
whitefang
If can, pls kindly hit thanks button as an appreciation
YES
THeLogiC said:
Cant you enter into flashmode????
Click to expand...
Click to collapse
yes i can enter the flashmode but as i connect the phone via the usb cable the flashtool displays
flashing started
flashing ending
ERROR
not a noob
whitefang3456 said:
Need More details:
1)Locked or Unlocked Bootloader?
2)Which stock kernel you flashed? Downloaded from?
3)[If Locked Bootloader] Can you enter xrecovery? If can, make full wipe, clear cache partition, install new ROM via "install custom zip from SDcard.
4)[If Unlocked Bootloader] Try flash some custom Kernel for Unlocked bootloader like DooMKernel, see whether it reach recovery mode or not.
Sincerely,
whitefang
If can, pls kindly hit thanks button as an appreciation
Click to expand...
Click to collapse
the bootloader is unlocked
the kernel flashed was X10_2.3.3_Th_kernel-n1.1-BootManager-v2.0
the rom installed was ThGo2 v17
no i am not able to flash to any other kernel.... but i am able to enter flashmode
it says error in flashtool
THE ROM MADE MY PHONE PHONE SO-01C AS THE MODEL NUMBER IN SETTINGS ABOUT PHONE....
so i am getting forece close when try repairing my phone using seus
Download 2.3.3 stock firmware and flash it through flashtool
Sent from my X10i
didnt work
THeLogiC said:
Download 2.3.3 stock firmware and flash it through flashtool
Sent from my X10i
Click to expand...
Click to collapse
i already did that have a repository of all the roms and kernel on my hdd.....didnt work though
so went to the blog and updated my kernel from thjap.org... turns out every1 was compalining of the rom being laggy and the kernel used was older version so updated it and then came back to FXP125.....
the BEST rom out there :victory:
anyway a BIG THANKS 2 ALL
rohit25 said:
i already did that have a repository of all the roms and kernel on my hdd.....didnt work though
so went to the blog and updated my kernel from thjap.org... turns out every1 was compalining of the rom being laggy and the kernel used was older version so updated it and then came back to FXP125.....
the BEST rom out there :victory:
anyway a BIG THANKS 2 ALL
Click to expand...
Click to collapse
yes cm7.2 is great
Hi Guys!
I had root my Xperia Mini Pro and instal CWM.
I'am on GB.
When i instal a ROM, Real ICS or Real ICS lite, i can see only sony ericsson logo.
I waiting during 15min, and nothing has change.
Now I unlock bootloader , but i always see only sony ericsson logo, when i start the phone after rom installing.
What can I do?
I never had there problems with my old x10.
PS: "From the downloads section, download kernel installation package and extract the folder."
Where is this section? Where can i download kernel instalation package? (http://forum.xda-developers.com/showpost.php?p=27376017&postcount=2)
I'am sorry for my very bad english.
every rom has its specified kernel
For stock based ICS Roms you can flash
Rage Kernel(v3.2)
Krsh Kernel
Mesa kernel
for CM 9.0 flash the kernel included the zip file by FXP
there are some kernels for GB roms as well you can search them
So, if i want to instal RealICS rom, i must instal first the rom and next i instal specified kernel with fastboot, yes?
Beacuse RealICS dont work with stock kernel.
PS: If i flash Krsh kernel and next i instal a stock rom with flashtool, Krsh kernel is remplaced for stock kernel?
First kernel, then rom.
And, make sure u have unlocked bootloader to install custom kernel.
Or, u can use rom which based on official ics. Like expeacer rom.
Sent from my Nokia 3310
Hmm, it is complicated ; o
I'm sure, my bootloader is unlocked. I check in system info.
I'am on Stock GB , rooted with CWM and unlocked bootloader.
And now i want to instal RealICS. I have to instal Krsh kernel for ICS, but i have GB. How i do? First i have to instal Rooted ICS ? And later i instal Krsh kernel for ICS and I instal RealICS rom?
Or can i instal RealICS with rooted GB?
I'am lost ; |
D'oh. They already gave the answer yet u still ask the same question again.
U need to read, lots and lots of reading.
- turn off the phone
- boot to fastboot and flash ICS kernel
- when booting up ..enter cwm
- flash rom
- reboot
an0nym0us_ , that's right i have to read a lot. Beacuse i not understend a lot of words.
And i want to be sure for the instalation, beacuse i try a lot of times, and i had always sony logo.
Thanks for all the anwers ; )
Now i go to instal the rom.
I follow caer_ayu's tuto.
do a full wipe
and
format system (optional)
before flashing new roms
good luck m8
My guess is u didn't do wipe data in recovery before flashing the rom, hence the stuck at boot.
Good luck.
First things look complicated. Once you understood the basics all is much easier.
Most custom roms need custom kernels. Custom kernels can only flashed with unlocked bootloader.
Gesendet von meinem WT19i mit Tapatalk 2
I did all wipes and formats. But with the stock kernel , RealICS dosen't work.
But now, i had follow caer_ayu's mini tuto and that's work!
Thanks for you all, for all anwers! THANKS!
I was confused with kernel instalation, now all is ok.
Thanks one again!
And sorry for my bad english.
exiProx said:
I did all wipes and formats. But with the stock kernel , RealICS dosen't work.
But now, i had follow caer_ayu's mini tuto and that's work!
Thanks for you all, for all anwers! THANKS!
I was confused with kernel instalation, now all is ok.
Thanks one again!
And sorry for my bad english.
Click to expand...
Click to collapse
Good luck man, and beside learning to flashing, learn also to click thanks button. Easier than texting . For those who helped u.
Sent from my Nokia 3310
Hello again.
I tried to reinstall my phone, so I used Rage Kernel and this ROM, but when I turn on the phone, it shows first Sony logo, then Sony Ericsson logo and it's all, then it restarts.
I will be very glad for every help. Thanks
tdolejs said:
Hello again.
I tried to reinstall my phone, so I used Rage Kernel and this ROM, but when I turn on the phone, it shows first Sony logo, then Sony Ericsson logo and it's all, then it restarts.
I will be very glad for every help. Thanks
try reinstalling again..in the CWM..do this steps.
wipe data/factory reset
wipe only your cache and dalvik-cache
go to mounts and storage -format system.
install zip from sd -choose the zip.
u have to install rage GB kernel from flashtool..
Click to expand...
Click to collapse
What ver of kernel u have been install to ur, i think ur wrong ver maybe ur have install wtong kernel that why ur phone does"nt boot
Sent from my ST15i using xda premium
tdolejs said:
Hello again.
I tried to reinstall my phone, so I used Rage Kernel and this ROM, but when I turn on the phone, it shows first Sony logo, then Sony Ericsson logo and it's all, then it restarts.
I will be very glad for every help. Thanks
Click to expand...
Click to collapse
If the sony logo is showing then chances are that your kernel has not been replaced. Upon a successful kernel replacement the logo which comes on the splash screen is usually the one the developer has made for the kernel. Try reinstalling the kernel or try using a new one. Also make sure you are installing the kernel correctly. Flashtool is a very simple and effective way if doing the same.
with kernel you have to install custom rom other wise your device will keep restarting and also after flashing kernel try factory reset and cache wipe in cwm and then flash the rom
tdolejs said:
Hello again.
I tried to reinstall my phone, so I used Rage Kernel and this ROM, but when I turn on the phone, it shows first Sony logo, then Sony Ericsson logo and it's all, then it restarts.
I will be very glad for every help. Thanks
Click to expand...
Click to collapse
Please tell me what firmware is your phone right now??? remember firmware is important before you start flashing....you cannot flash Custom ICS Rom while you phone is using GB...it will brick your phone....
CircuitBug said:
If the sony logo is showing then chances are that your kernel has not been replaced. Upon a successful kernel replacement the logo which comes on the splash screen is usually the one the developer has made for the kernel. Try reinstalling the kernel or try using a new one. Also make sure you are installing the kernel correctly. Flashtool is a very simple and effective way if doing the same.
Click to expand...
Click to collapse
As far as i know when Sony Logo appear, that show that you are on ICS Rom...Since He said that the Sony Ericsson logo appear next i believe he flash Custom ICS Rom into GB cause if ICS, after Sony Logo it must be Xperia (bootanimation)....Rage And KrsH kernel have Sony name on it...Mesa kernel has Sony Ericsson name on it...
usman_fareed said:
with kernel you have to install custom rom other wise your device will keep restarting and also after flashing kernel try factory reset and cache wipe in cwm and then flash the rom
Click to expand...
Click to collapse
You can use custom kernel on Stock Rom....i have use Rage Kernel, KrsH Kernel and Mesa Kernel on my stock ICS Rom...never got any problem with it....
is it possible to flash the KrsH Kernel v3 ICS on the stockrom GB ?
Or do i have to update GB to ICS fist with SEUS.
THX
duke4you said:
is it possible to flash the KrsH Kernel v3 ICS on the stockrom GB ?
Or do i have to update GB to ICS fist with SEUS.
THX
Click to expand...
Click to collapse
Not Possible....you need to upgrade to ICS before you can use KrsH kernel v3....
Pusak Gaoq said:
Not Possible....you need to upgrade to ICS before you can use KrsH kernel v3....
Click to expand...
Click to collapse
THX
duke4you said:
THX
Click to expand...
Click to collapse
←←←← The Thank Button Is Right There
tdolejs said:
Hello again.
I tried to reinstall my phone, so I used Rage Kernel and this ROM, but when I turn on the phone, it shows first Sony logo, then Sony Ericsson logo and it's all, then it restarts.
I will be very glad for every help. Thanks
Click to expand...
Click to collapse
While flashing the ROM, did you selected "Exclude Kernel" in Flashtool?
hi there,
i installed the cyanogemod 9 on my xperia mini pro.
the thing now is that i want to try the ultimate rom hd...
so far i have installed the kernel Messa 2.3 for mango and then flashed the ultimate hd rom..
issue: i have the sony ericsson logo and then black screen.
do i need to do some special step ?
i tried also with a stock rom but same issue.
thank you in advance.
use flash files to flash your mobile and then install custom rom
мυsтαғα ¢нαυδняγ
Mustafa Chaudhry said:
use flash files to flash your mobile and then install custom rom
мυsтαғα ¢нαυδняγ
Click to expand...
Click to collapse
thx for fast answer.
actually i did the following
1) flashtool -> fastboot kernel flash with the MEssa file
2) reboot on the cwm, do the clear etc... then install from sd card.
but everytime the phone boot and then logo Sony Ericsson then black screen :-/
i am thinking about trying another kernel
tit0um said:
thx for fast answer.
actually i did the following
1) flashtool -> fastboot kernel flash with the MEssa file
2) reboot on the cwm, do the clear etc... then install from sd card.
but everytime the phone boot and then logo Sony Ericsson then black screen :-/
i am thinking about trying another kernel
Click to expand...
Click to collapse
answering to myself.
after flashin kernel panic it booted :highfive: dunno why Messa do not
if the guy devlopping mesa is crossing this thread
i am wondering why it doesnt want to work on my mango
Mesa 2.3 is for JB only.
Ultimate HD ROM is ICS based stock rom , so flash any stock based ICS kernel like rage, panic,mesa 2.2
Sent from my Xperia Mini Pro using Tapatalk 2
You get black screen because you are using a jb kernel on a ics rom...
hi there,
thx for fast response
i checked the thread trail and people were saying they used MEsa so i went too fast to the last version.
thank you again for your help guys.
Hi guys, I'm in a deadlock situation trying to recover my Xperia Ray. It just stuck at Sony logo. I know there is a lot of topics with the same issue, I've tried all that I could and most of the instructions that I can find on the internet, but not luck.
Here is what I've done but unfortunately, none works:
1) Install Sony Update Service, select Xperia Ray and reinstall the latest firmware. [Result: Successful, but still stuck at Sony Logo]
2) Download the .ftf (I flashed almost all version, GB, JB etc) , wipe everything, and flashed using flashtool. [Result: Successfully flashed, but still stuck at Sony Logo]
3) Unlock the bootloader, using Flashtool, I flashed several custom kernel and rom combination, (Lupus, Xkernel, Ice Bean Rom, MIUI rom, Xperia HD rom). [Result: Successfully flashed the custom kernel and rom, CWM from the kernel loads fine to flash the rom, but after flashing, still stuck, this time at the kernel's logo]
4) Relock the bootloader, tried to reflash the firmware using Sony Update Service again. [Result: Successfull, but stuck at Sony logo, again]
That's it, please help me, anyone have any idea on what can I do to solve this? Is it possible that this is the hardware defect, not software?
I'll really appreciate your help.
please someone help us :'(
Even i am stuck in the same situation :'( have tried out the same steps as above :/ still no success
Please some one try to help in order to get our rays working :/
Anyone? My last resort would be to send the phone to Sony service centre and see what they can do.
guys, now im on this situation too. i have no idea what should i do next. you guys can solve it ?
mrahmanda said:
guys, now im on this situation too. i have no idea what should i do next. you guys can solve it ?
Click to expand...
Click to collapse
expalain a bit further:
rom, device, root, bl unleck yes or no, worked it before ....?
the problem is if u flashed a custom kernel like mikes from cm11 or so you shouldnt see sony logo , you should see custom kerneles custom boot logo. else kernel not flash sucessfully
bejunk said:
expalain a bit further:
rom, device, root, bl unleck yes or no, worked it before ....?
the problem is if u flashed a custom kernel like mikes from cm11 or so you shouldnt see sony logo , you should see custom kerneles custom boot logo. else kernel not flash sucessfully
Click to expand...
Click to collapse
uh im sorry,
ROM: any rom stock/costum , JB/ICS/KK/GB (i tried many rom but always stuck on kernel logo)
Device: ST18i (ray)
Bl: unlocked
the problem is start when i forget my pin from lockscreen, and i do a full wipe, but stuck on kernel logo and never get boot