Related
Ok, i just got my first scratch, never had it with SGS but here it is, and i always put it alone in my pocket.
So much advertising for what?
You didn't use a screenguard?
So do you think gorilla glass is scratch proof or just harder to scratch.
Is it deep or just the coating on top?
Suggest getting a screen protector maybe. I have one tiny scratch but could have been avoided with protection.
I remember life before gorilla glass.
Sent from my GT-I9100 using XDA App
I was using the phone for a few days after i got it without a screen protector. I knew it was gorilla glass and stuff, but something inside kept gnawing me about getting a screen protector.
Just buy a screen protector and have that mental peace.
Better safe than sorry
Gorrila baby skin
G.glass it;s just junk name for user make it more atractive.
As a user HD2 i hate gorrila non glass,Prefer no scrachtes!
Goriila glass is maybe not easy to damage but it's like baby skin!
3m with sgs2 screen glass is messy and my HD2 2y old is scretch free and never broken.
It's a ****y product and it's not for pocket!
Yep, got a tiny scratch as well out of seemingly no where.. it's definitely more fragile than my partners iPhone 4 which gets yanked in and out of her handbag daily vs my careful nurturing
certain particles will scratch gorilla glas quite easy like sand and dust . yes thats right even dust can contain quartz and sand particles both of which are hard sunstances so dust wiped on your screen while polishing can lead to scratches on the gorilla glass
info on just dust http://en.wikipedia.org/wiki/Dust and thats without pocket/bag stuff that could have collected over time , sand etc
here a user fixed his scratches to gorilla glass but it sounds risky to me
http://forum.ppcgeeks.com/moto-droid/114659-gorilla-glass-does-scratch-but-i-know-how-repair.html
another user here takes it even further and uses an abrasive by the looks of it then polishes it out after
http://forum.xda-developers.com/showthread.php?t=821129
hope you find a soloution mate i always use a screen protector just for peace of mind you can get some great ones check out the screen protector thread in the forum
have a good weekend
edit
even the iphone4 can scratch quite easily http://www.google.co.uk/search?q=ip...s=org.mozilla:en-GB:official&client=firefox-a
Well,that sucks.
Still scratch free here without protector
On milestone and droid 2 global gorila glass I never had a scratch having each one about a year and with no screen protector at all...
Maybe the cover for not having so many finger prints can make gorilla glass less "gorila" on SGS2?
Cheers
buxz777 said:
certain particles will scratch gorilla glas quite easy like sand and dust . yes thats right even dust can contain quartz and sand particles both of which are hard sunstances so dust wiped on your screen while polishing can lead to scratches on the gorilla glass
info on just dust http://en.wikipedia.org/wiki/Dust and thats without pocket/bag stuff that could have collected over time , sand etc
here a user fixed his scratches to gorilla glass but it sounds risky to me
http://forum.ppcgeeks.com/moto-droid/114659-gorilla-glass-does-scratch-but-i-know-how-repair.html
another user here takes it even further and uses an abrasive by the looks of it then polishes it out after
http://forum.xda-developers.com/showthread.php?t=821129
hope you find a soloution mate i always use a screen protector just for peace of mind you can get some great ones check out the screen protector thread in the forum
have a good weekend
edit
even the iphone4 can scratch quite easily http://www.google.co.uk/search?q=ip...s=org.mozilla:en-GB:official&client=firefox-a
Click to expand...
Click to collapse
Dammit, yesterday i went to the beach with the phone, sand may be the reason of the scratch
I already have a screen protector, but i didn't set it because there was no reason to me, now i got one
Yeah, I scratched mine too but I've kind of got used to it. It's a little annoying I guess.
Anyway, suppose it's a bit like shutting the door now the horse has bolted but might as well get a protector. Don't they change the feel of the screen though? I've always thought they might be kind of annoying.
As a user of both sgs and sgs2, I find the Gorilla glass on sgs2 to be far superior in every department
Sent from my GT-I9100 using XDA App
You folks are aware that no one ever said gorilla glass is hard as a diamond, right?
In fact, no substantial claims about it's hardness were *ever* made. It's supposed to have a better tensile strength and be less breakable, not harder.
In fact, the treatment it gets plus the oleophobic coatings and whatnot might even make it more susceptible to scratching than regular glass.
Sent from my GT-I9100 using XDA Premium App
You were one of the lucky few with your hd2. I've never seen a screen shatter so easily. I made money repairing the hd2 because it couldn't take a bump.
ecce said:
G.glass it;s just junk name for user make it more atractive.
As a user HD2 i hate gorrila non glass,Prefer no scrachtes!
Goriila glass is maybe not easy to damage but it's like baby skin!
3m with sgs2 screen glass is messy and my HD2 2y old is scretch free and never broken.
It's a ****y product and it's not for pocket!
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
intruda119 said:
You were one of the lucky few with your hd2. I've never seen a screen shatter so easily.
Click to expand...
Click to collapse
Shatter or scratch?
There IS a difference, you know.
Hardness and (tensile) strength aren't the same thing.
And they're usually inversely proportional.
Materials that have a high hardness (resistance to scratching) are usually VERY brittle.
Materials that have a high tensile strength (resistance to breaking) are usually VERY scratchable.
Well,everything is destroyable in therm of a bad usage,even this "mighty" glass.The real example is Titanic,the unsinkable ship in my a..
I also have very small scratches, there was nothing in my pocket when it happened!
My SGS was stronger, but the SGSII's screen is sweeter!
I decided to buy a brando screen protector, as far as i know they're washable
The sooner i receive my screen protector the better, im ultra careful not to have anything else in my pocket like keys or coins when then phone is there in case i do get a scratch,so far so good but after spending all that cahs on this phone it's important to get a screen protector.
This is one of the weak points with our phone, "hard"ware wise.
I also got a small scratch from putting it in my pocket without anything else. Compared I never got a protector for my old smart phone (competitor brand and os ) and only a few small scratches in some years, I was a bit disappointed.
Though, that scratch isn't that bad, and now that my protective foil arrived it can be neither seen nor felt.
But: Without the cheap foil the "feeling" was better
Still, I like my new phone
HI,
i saw many users says about scratches and tiny scratches in thair theirs Atrix screens. What is your opinion about zagg shield or any other screen protectors? phoes touch drop down with these protectors or any other problem?
can i change the glass if it gets many scratches?
Jiimbo said:
HI,
i saw many users says about scratches and tiny scratches in thair theirs Atrix screens. What is your opinion about zagg shield or any other screen protectors? phoes touch drop down with these protectors or any other problem?
can i change the glass if it gets many scratches?
Click to expand...
Click to collapse
For one, if you wanted to spend over $100 you could get a new glass screen and get it installed somehow. As far as getting protection then, I fully recommend it. Gorilla glass is NOT AT ALL as good as they say it is. My phone doesn't come into contact with razor blades and other crap it says it stands up against, but it does come in contact with minor pieces of lint in my pocket which somehow scratched this "impervious" screen...
As far as what type of protector...I didn't like Zagg or Ghost Armor or any of those stupid things. More expensive, more hassle than they're worth. I got I think a Splash Masque screen protector off Amazon or something. Something like that should do the trick. Not too hard to install w/o bubbles and I can't really tell it's there (feels normal, fits just fine).
zagg scratch guards are pathetic to use.
all rubbery feel with no smoothness unless you lube it
overpriced stuff that you cant through off because you overspent kind of feeling ..
get cheap clear screen protectors.. cost $2-5 over ebay for pack of 10 or something
I agree with the other two. Don't get a Zagg. I am currently using one and regret it. When I slide my finger to scroll or to play games, sad enough sometimes my fingers don't slide as smooth as opposed to some other screen protectors. Although I would say that it has saved my screen a couple of times. If your willing to spend the money on a Zagg and idk what your budget is like you could try out the otter box Commuter. Its isn't that bulky in my opinion and has a pretty good screen protector on it, with the bonus of protecting the phone itself.
Sent from my MB860 using XDA App
I use zagg and I like it. It does have a rubbery feel though but no glare and easy smudge clean up are good.
Sent from my MB860 using XDA Premium App
I use a Zagg screen protector and Im pretty pleased with it.
Sent from my MB860 using Tapatalk
I have Zagg. I agree with the rubbery feel, but I like it. It gives it mooooreeee grip.
Enviado desde mi Motorola™ Atrix® usando Tapatalk
I used a bodyguardz but didn't really like the feel of it and the proximity sensor wouldn't work right. Order some other cheap one off Amazon which feels a lot better but the proximity sensor still doesn't work right with it.
I can deal with the proximity sensor issue more than I could put up with a scratch in on my screen. Not sure if the zaggs interfere with the proximity sensor or not.
Sent from my MB860
I use Zagg full body coverage, and I'm very happy with it. Yes, it feels rubbery.
But I'm looking the Splash Masque stuff, it's good to know a second opinion
I picked one up on Amazon called
Motorola Atrix 4G Crystal Clear Premium Screen Protector 2 Pack by REALOOK (AT&T)
I can't link since I'm a noobie poster. It's slightly spendy at 10.99 but has been great for me so far. Easy to put on with no bubbles, doesn't effect the usability of the screen either. By far the best screen protector I've used when compared to a few I've had on my iPhones.
Jiimbo said:
HI,
i saw many users says about scratches and tiny scratches in thair theirs Atrix screens. What is your opinion about zagg shield or any other screen protectors? phoes touch drop down with these protectors or any other problem?
can i change the glass if it gets many scratches?
Click to expand...
Click to collapse
Don't go the Zagg route.
First the invisible shields are a true PITA to install! (trust me it's a lot harder than a normal screen protector)
Second even if you get it installed correctly it feels rubbery weird.
Just go with the clear screen protector cheapies on eBay, and either a leather holster or a TPU clear case (depending if you pocket or not) and you'll be fine...
Im a huge fan of ghost armor. I like the look and feel of it. Yeah it sucks do pay $20 for the initial screen and service, but its $5 bucks after to replace it forever.
Sent from my MB860 using XDA App
I went with Zagg myself, went in to the local store had them install it for 10 bucks. Just got it replaced, it does have a sort of grip to it on the screen that you have to get use to. Overall all I'm happy with the protection it's given my phone, usually after a couple months I'll start seeing scratches and stuff, I'm a little disappointed that I had to take it in to get the shield replaced today, but it was free save for the installation free so I'd say it was definitely a good investment for my device.
Just curious as to how many people use a screen protector on their TF. If you don't, how's your screen holding up?
I've had my transformer since black Friday and the screen has not one scratch and I take it to class everyday. I have a case on it too.
Sent from my Transformer TF101 using xda premium
I have dogs that like to jump on beds, so I use one just in case. Also I use one so I don't fret about my glass being dirty or when a girl with rings on is playing with it, I will always know I have a perfect glass behind the screen protector. Sadly my screen underneath has funky **** going on like light bleed and a discolored spot
Sent from my Transformer TF101 using Tapatalk
I don't have a screen protector, but I am looking into getting one.
I have a very tiny dot on the border of the glass which I don't like much, just in case.
But the problem is how to apply a screen protector!! on my HD2 with its 4.3" display I had too much difficulty to put a screen protector without leaving dust underneath it, on a 10" display it is impossible....
I don't use a screen protector and my screen is perfect.
Tough i always keep it docked, so i guess it helps a lot
mcbyte_it said:
I don't have a screen protector, but I am looking into getting one.
I have a very tiny dot on the border of the glass which I don't like much, just in case.
But the problem is how to apply a screen protector!! on my HD2 with its 4.3" display I had too much difficulty to put a screen protector without leaving dust underneath it, on a 10" display it is impossible....
Click to expand...
Click to collapse
Biggest tip I can give is to apply the screen protector in the bathroom after running a hot shower to get the steam in the room to make the dust die down. Also, the bit of added moisture in the air helps to let you slide the screen protector around a bit before letting it become settled.
lightninjay said:
Biggest tip I can give is to apply the screen protector in the bathroom after running a hot shower to get the steam in the room to make the dust die down. Also, the bit of added moisture in the air helps to let you slide the screen protector around a bit before letting it become settled.
Click to expand...
Click to collapse
I use clear tape to get dirt out from underneath. But yes bathroom helps although I don't make it steamy. The biggest problem I ran into was aligning the whole thing. One corner would always be off just a tad. I ended up trimming it a bit and I can't even tell.
Sent from my Transformer TF101 using Tapatalk
checking for videos on how to apply a screen protector, I found this video:
where can I find this Dust Isolation sheet ?!? it seems GREAT
I use a screen protector on my TF101 mainly because it reduces glare and the fingerprints come off easier and it feels smoother that the regular gorilla glass
My tf101 was a best buy display model. It didn't have a screen protector then and it doesn't have one now. I sell saltwater livestock for a living and I'm a mechanic on the side, so it frequently comes in contact with dirt, grease, and saltwater. Not a scratch on the screen. I use a targus case to protect the screen when its not in use.
Regarding putting a screen protector on. Its just like window tint fellas. Clean screen as best you can. Mix some hand soap and tap water in a spray bottle. Spray screen protector and device and apply screen protector. Now spray front side of screen protector. Use a credit card or rubber squeegee to squeegee the water out from under the protector. As the water comes out it will drag the dust with it. Keep a towel on hand to dry the device as the water runs out. You might see a little water left under the protector after squeegeeing but it will dry completely over the next few days so don't worry about it.
TF101 EOS JB v63 Guevor 700 @ 1.5
Steinheil ultra crystal on mine. Best on the market bar none, and dry install. Nice and easy with no liquid.
Sent from my EVO LTE using Tapatalk 2
crzycrkr said:
Steinheil ultra crystal on mine. Best on the market bar none, and dry install. Nice and easy with no liquid.
Sent from my EVO LTE using Tapatalk 2
Click to expand...
Click to collapse
its just too bad that SGP has no longevity... and by that I mean I can still get a martian fields and skinomi products for my old Touch Pro 2 but cant get a screen protector for either OR my TF101 through SGP/Steinheil...
When it comes to screen protectors for me its SGP/Steinheil then Martian Fields (then pretty much anyone else), but like I said, 8-12 Months later they drop it completely... so unless you stock up on them, be prepared to be screwed to find a different brand if you have an issue (I had my nephew destroy one of mine... I couldnt get my finger under the side but 2min with him and me not looking and it was off and bent in half )
My .02 anyway..
Hammerfest said:
its just too bad that SGP has no longevity... and by that I mean I can still get a martian fields and skinomi products for my old Touch Pro 2 but cant get a screen protector for either OR my TF101 through SGP/Steinheil...
When it comes to screen protectors for me its SGP/Steinheil then Martian Fields (then pretty much anyone else), but like I said, 8-12 Months later they drop it completely... so unless you stock up on them, be prepared to be screwed to find a different brand if you have an issue (I had my nephew destroy one of mine... I couldnt get my finger under the side but 2min with him and me not looking and it was off and bent in half )
My .02 anyway..
Click to expand...
Click to collapse
I upgrade every year, so that doesn't concern me too much, but that's a good point. I also usually do buy an extra pack
Sent from my EVO using Tapatalk 2
unnecessary i'd say.
http://www.youtube.com/watch?v=EUcJnwyCtes
projeto56 said:
unnecessary i'd say.
http://www.youtube.com/watch?v=EUcJnwyCtes
Click to expand...
Click to collapse
And...you'd be wrong. All those things he did most likely wouldn't scratch regular glass. For the most part keys and coins aren't hard enough. What will scratch glass, gorilla or not, is sand. Sand and grit is everythere. If your hands are dirty its there. It there's lint in your pockets its there. That's the enemy of screens.
Sent from my EVO using Tapatalk 2
crzycrkr said:
And...you'd be wrong. All those things he did most likely wouldn't scratch regular glass. For the most part keys and coins aren't hard enough. What will scratch glass, gorilla or not, is sand. Sand and grit is everythere. If your hands are dirty its there. It there's lint in your pockets its there. That's the enemy of screens.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I still had some fun when he sliced an Apple on it
Anyway, mine lives with the dock, so my screen isn't in contact with random dirty stuff.
Sent from my GT-N7000 using XDA Premium HD app
Had the transformer since it was first released. After a few months of ownership i tried the SGP ultra fine matte protector as the insane glare was starting to bother me. Had that on for a few months during which the screen nor the protector took any damage as i keep it docked when its not in use. Took it off 3 months ago and since then i've gotten one hairline scratch thats about a cm long, not noticeable unless you knew where it was.
I would say if you keep the thing docked and take care when cleaning the screen its not necessary to have a screen protector. However if you don't use a dock and the tablet is constantly exposed to any number of things that can scratch it, or you're not in the habit of taking good care of your gadgets then a screen protector might not be a bad idea.
Every time i see one of those glass scratch demos i facepalm as i've had quite a few devices that were supposed to be "scratch proof" get scratched by the most mundane things. Its all about angle, material, and force. I can slice a screen and not get a scratch but angle it a bit and give it more pressure and I bet i can get these screens to scratch pretty easily.
Scratch resistance is awesome in the lab, but in the real world there are just too many variables to be absolutely sure.
lacrossev said:
Scratch resistance is awesome in the lab, but in the real world there are just too many variables to be absolutely sure.
Click to expand...
Click to collapse
Says my Galaxy note.
Got some ugly scratches when I decided to use the flip cover case. Some sand or dirt got in between the glass and the leather cover. My heart is still broken because of it.
Sent from my GT-N7000 using XDA Premium HD app
So how do we feel about ZAGG screen protectors? I'm looking to put one on my Slider. In the past, I have been pleased with Caseen and their glareshatter screen protectors. Just wondering if there's any really recommended brands?
Solar.Plexus said:
So how do we feel about ZAGG screen protectors? I'm looking to put one on my Slider. In the past, I have been pleased with Caseen and their glareshatter screen protectors. Just wondering if there's any really recommended brands?
Click to expand...
Click to collapse
I've used ZAGG a few times, once on my zune, once on my evo and again on my evo LTE. The original ZAGG product is one of those soft wet apply films that are a bit grippy compared to a hard plastic film protector. I hated it for my zune and i hated it for my evo because of the grippiness as well as the slight orange peel effect. Over time the zune's wore down enough so that it was smooth and had no orange peel, but that took about a year and only in the spots you swipe around to change tracks and volume. Same thing happened with my evo.
On the Evo LTE I was tempted to try zagg HD, which actually was much better than the original film in that it was a lot more clear and had less grip, but alas it was still a soft wet apply film and i just couldn't get used to it.
If you like the grippy texture then the zagg and similiar soft films last longer than the hard plastics. It seems like a love it or hate it situation for a lot of people, myself included.
I will always go with the hard plastic dry install as those are in my opinion easier to apply because you can hover over the screen and slowly lower it as opposed to sliding it around on liquid and then have to squeegee it all out later. Even if i have to replace it once every few months as opposed to once a year for the zagg, i will still stick with the hard plastics.
Hey all,
I recently got an annoying scratch on the screen and was wondering if there was any good product for buffing it out. It might be a little too deep since I can feel it with my fingernail, but I would like to avoid replacing the digitizer touch screen. I saw some posts about various products, but for other phones.
Thanks
I would just be careful of messing up the digitizer. Buffing it might ruin its sensitivity.
Some people say that a good quality screen protector can help hide small scratches.I think one that gets mentioned a lot is called real look.
Sent from my rooted slightly modified Rezound using XDA
Realook is one of the best, but can only be used on perfect screens. Otherwise it will bubble really badly. For a screen that's already scratched, you need to go with a wet apply cover like zagg, or a cheaper knock off of zagg.
Sent from my ADR6425LVW using Tapatalk 2
Aeroman787 said:
Hey all,
I recently got an annoying scratch on the screen and was wondering if there was any good product for buffing it out. It might be a little too deep since I can feel it with my fingernail, but I would like to avoid replacing the digitizer touch screen. I saw some posts about various products, but for other phones.
Thanks
Click to expand...
Click to collapse
I wrote a writeup a few months back about buffing out scratches on the Rezound because I scratched my first one. link. I was able to successfully buff the scratches out with a product called "3M Trizact Perfect-It III Machine Glaze" (or just 3M P/N 06070).
While it does work well to remove the scratches, its expensive, and also I just don't recommend it for an important reason: The Rezound's glass has a texture to it. You don't notice it when looking straight at it, but if you let the light reflect off it you'll see that the surface of the glass is very slightly bumpy. If you attempt to buff out a scratch, you'll be left with a noticeable flat area on the screen where you polished the scratch out.
Also, the polishing compound I used costs $60 for a quart size bottle, and you only need like less than a cap-full to do the job. An alternative option is to buy a brand new glass and digitizer for less than $50...
Replacement glass/digitizer
I find sandpaper to buff out my scratches very nicely. Phone becomes smooth as a baby's bottom.
Hey guys it's my first post on XDA. I hope this will be helpful for people who are looking for a full coverage screen protector for their brand new Galaxy S7.
First of all, as you all know that the S7 screen has an even worse curve than the S6. Therefore, it has been a nightmare for me to find a screen protector that covers the whole screen without lifting on the edges. ( major OCD User)
I got tired of tempered glass and PET cuz they don't cover the full screen or don't fully stick on the edges so I decided to go with TPU.
i-croo Screen protectors are flexible TPU material that will curve with your screen and stick completely no matter how curvy the edge of the screen is. The cut outs are extremely precise and coverage is great ( i would say about 98% of the screen). The clarity is supered ( tried Yootech S P which cover the whole screen but makes screen looks grainy and has rainbow effect). You can't even tell there is a screen protector on unless u pay very close attention. These screen protectors provide much better protection against scratches or drop compared to PET.
The screen protectors comes with everything you would find with other screen protectors. However, these come with an installation tool ( which i did not use cuz i prefer not having too much stuff near the phone that has dust particles which can be attract by the static charge when you peel the screen protector off), but it think it might be helpful for those who are not skilled at aligning screen protector. The best part is it is a dry installation so you can use dust removal sticker to get rid of dust particle if there is any under the screen. ( Can't tell you how much i hate wet installation which collects tons of dust and fingerprints). In addition, they are very thoughtful and included a hard squeegee that is cover with cloth tape so you would not scratch your screen protector.
The reviews of these on Amazon are not great but trust me this is the best solution for now until they can make curved tempered glass that fully adhere and not just the outside edge like Coral Glass). It works great with Ringke slim case ( will update with 3 more cases soon: Spigen rugged, BLIQ Flex Pro Espresso, and VRS Design-High Pro Shield )
In summary.
PROs:
- Prefect fit, full coverage
- Extremely clear ( almost invisible)
- Fully stick
- better protection than PET
- Dry installation
- thoughtful presentation
Cons.
-might be hard for some to install
- little bit hard to peel off ( tip: use a small dust removal sticker to hold the corner of the screen protector as you peel it off to prevent getting fingerprint under it, also makes it much easier to peel)
- not sure if it will work with all cases
OCD user score ( 4.5/5)
PS: I think it better to get these protectors without the Installation tool if you're skilled at installing them, save a dollar
I cant post images links due to having less than 10 post, you can see the images from my amazon review under Thetechnerd. It would be great if someone can help me post the images here ( plz pm me)
PLz search B01D0XEF3Q from Amazon search box. Thanks all
Here's the link http://www.amazon.com/Galaxy-Protec...01D0XEF3Q/ref=cm_cr_arp_d_product_top?ie=UTF8
Some reviews have been saying that it scratches really easily. Also does it attract fingerprints/oil easily? Thanks
I did not see any noticeable scratch after 4 days of using it, only tiny micro scratches that you have to put under the light and look at the phone from an angle but maybe because I take good care of my stuffs. So I tested scratching the screen protector with a sim removal tool. After running the pointy end of the sim removal tool a few times on the phone surface, I was like "Holly crap, the screen protector is full of scratches". I then use a micro fiber cloth to rub it off, and "WOW" all of those scratches magically disappeared from the surface of the screen protector, and it is looking like new. Therefore, i believe that these screen protector are self-healing.
About smudges and fingerprints, I think it gets dirty at the same rate as any other PET screen protector. However, I do think that TPU screen protector are harder to clean. It requires more effort to clean than PET and and tempered glass. I had to rub it almost twice as many times as I did with PET. Oh well, for the clarity and protection it provides, it doesn't bother me that much.
Jasonjk said:
I did not see any noticeable scratch after 4 days of using it, only tiny micro scratches that you have to put under the light and look at the phone from an angle but maybe because I take good care of my stuffs. So I tested scratching the screen protector with a sim removal tool. After running the pointy end of the sim removal tool a few times on the phone surface, I was like "Holly crap, the screen protector is full of scratches". I then use a micro fiber cloth to rub it off, and "WOW" all of those scratches magically disappeared from the surface of the screen protector, and it is looking like new. Therefore, i believe that these screen protector are self-healing.
About smudges and fingerprints, I think it gets dirty at the same rate as any other PET screen protector. However, I do think that TPU screen protector are harder to clean. It requires more effort to clean than PET and and tempered glass. I had to rub it almost twice as many times as I did with PET. Oh well, for the clarity and protection it provides, it doesn't bother me that much.
Click to expand...
Click to collapse
I am really close to ordering this product since I am sick and tired of trying to find a tempered glass that does the job. Well, I take that back. I know that coral guard one or whatever apparently does the job but it is like 30 bucks.
Is the TPU cover in between regular film protector and tempered glass as far as hardness and protection? How is the feel of the protector, more glass or film?
sunrat39 said:
I am really close to ordering this product since I am sick and tired of trying to find a tempered glass that does the job. Well, I take that back. I know that coral guard one or whatever apparently does the job but it is like 30 bucks.
Is the TPU cover in between regular film protector and tempered glass as far as hardness and protection? How is the feel of the protector, more glass or film?
Click to expand...
Click to collapse
I ordered and should be receiving it today. Once I install it I'll try to answer any questions if op doesn't beat me to it.
Sent from my SM-G930T using XDA-Developers mobile app
dzaster89 said:
I ordered and should be receiving it today. Once I install it I'll try to answer any questions if op doesn't beat me to it.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
Wonderful. Thank you.
Sent from my SM-G930V using Tapatalk
sunrat39 said:
Wonderful. Thank you.
Sent from my SM-G930V using Tapatalk
Click to expand...
Click to collapse
So I installed the screen protector yesterday and first of all I have to say it is a great fit. This is truly an edge to edge protector. Went on fairly easy, let it dry over night and I see no bubbles or peeling. As far as the material goes I'd say it's somewhere in between PET and those self healing films. This particular one is very clear with a small amount of texture (sticky feel), and under some lighting there is a slight rainbow effect. I'm used to glass screen protectors but this is a great compromise unless your willing to pay $30 for the full coverage ones. I'm also pretty picky about what goes on my phone and I honest give this a 5/5 for quality and price.
Sent from my SM-G930T using XDA-Developers mobile app
Yeah I ordered a two pack thank God. The first one was so bubbly that I took it off. Installed the second one and it still is bubbly but I tried to smooth it out. It has this weird indentation because of smoothing it out but whatever.
It's easier to tolerates than the horrible halo effect.
Sent from my SM-G930V using Tapatalk
sunrat39 said:
Yeah I ordered a two pack thank God. The first one was so bubbly that I took it off. Installed the second one and it still is bubbly but I tried to smooth it out. It has this weird indentation because of smoothing it out but whatever.
It's easier to tolerates than the horrible halo effect.
Sent from my SM-G930V using Tapatalk
Click to expand...
Click to collapse
I had some weird stuff going on after the install but as it dried up it slowly went away. I install paint protection films on cars and this is very similar. Usually I let my customers know it takes about 2 days to fully dry, so hopefully yours is still in the drying phase.
I could not agree more though that damn halo effect on the regular protectors just kills the beauty of the phone.
Sent from my SM-G930T using XDA-Developers mobile app
Wait drying?
Mine was a dry install. Did you use liquid anyway?
Sent from my SM-G930V using Tapatalk
I guess I forgot to mention that. Lol I did mine as a wet install, figured it would be cleaner.
Sent from my SM-G930T using XDA-Developers mobile app
I'm probably going to return mine. The edges keep lifting with my spigen rugged protector.
Sent from my SM-G930V using Tapatalk
Actually, it looks like the manufacturer is sending me another unit since I had issues with these. Any advice on putting these things on without causing any sort of surface damage? I can see indentations when viewing my protector at certain lighting.
I know you did a wet install but I don't think I want to go that route. Maybe I just need to be easier on the protector when I am pushing the bubbles out?
What is the difference in this and every other wet install protector that is not PET, but more that rubbery material?
Has anyone tried this screen protector with the Tech21 Frame case?
sunrat39 said:
Actually, it looks like the manufacturer is sending me another unit since I had issues with these. Any advice on putting these things on without causing any sort of surface damage? I can see indentations when viewing my protector at certain lighting.
I know you did a wet install but I don't think I want to go that route. Maybe I just need to be easier on the protector when I am pushing the bubbles out?
Click to expand...
Click to collapse
Wet install is best with a slightly soapy water solution and since our phones are water resistant its a no brainer. Only other suggestion is as you said, go easy when using the squeegee.
km8j said:
What is the difference in this and every other wet install protector that is not PET, but more that rubbery material?
Click to expand...
Click to collapse
I haven't used to many wet install protectors but I'm really liking this one, even though it's not sold as a wet install. Like I said earlier it's a great compromise for the fit, not too rubbery and I haven't noticed any reduced screen resolution.
Sent from my SM-G930T using XDA-Developers mobile app
---------- Post added at 01:17 PM ---------- Previous post was at 01:15 PM ----------
sanjay228 said:
Has anyone tried this screen protector with the Tech21 Frame case?
Click to expand...
Click to collapse
Some people have reported issues with certain cases, if your case has a lip that hugs the bezels it might cause peeling. I'm using the calicase ultra thin case with no issues.
Sent from my SM-G930T using XDA-Developers mobile app
sunrat39 said:
Actually, it looks like the manufacturer is sending me another unit since I had issues with these. Any advice on putting these things on without causing any sort of surface damage? I can see indentations when viewing my protector at certain lighting.
I know you did a wet install but I don't think I want to go that route. Maybe I just need to be easier on the protector when I am pushing the bubbles out?
Click to expand...
Click to collapse
lol don't do wet install cuz it freaking sucks. I recorded how I install my, will edit and post it soon. This is not even 30% as difficult as the G-color GS7 back protector, hell my skills are no joke and I had to give up on that one cuz it's literally impossible to install it without bubble.
Would it be the same http://www.ebay.com/itm/icroo-1-1-3...hash=item4d42230422:m:mh6L4r4ScGVKkUqkvj8WDEg ?
UPDATE:
I just scroll the page and seams to be it is the same.
dzaster89 said:
Wet install is best with a slightly soapy water solution and since our phones are water resistant its a no brainer. Only other suggestion is as you said, go easy when using the squeegee.
I haven't used to many wet install protectors but I'm really liking this one, even though it's not sold as a wet install. Like I said earlier it's a great compromise for the fit, not too rubbery and I haven't noticed any reduced screen resolution.
Sent from my SM-G930T using XDA-Developers mobile app
---------- Post added at 01:17 PM ---------- Previous post was at 01:15 PM ----------
Some people have reported issues with certain cases, if your case has a lip that hugs the bezels it might cause peeling. I'm using the calicase ultra thin case with no issues.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
Alright I am gonna give the wet install a shot.
What was your dilution with soap and water? Just a drop in a cup of water and mix it around? Did you use a sprayer or just use your hands?
Be careful with the soapy water. Soap lowers the surface tension of water and can get into the phone. Read that someone washed their phone and ruined it because of the soap.