Hi all. I want to have stock rom on my evo 3d, but I want to flash another kernel to use beats audio. I understood that I can't flash another kernel on an old Ruu. Can u link me latest Ruu? And say me all I have to do to flash stock rom (latest), root and recovery, with another kernel naturally. Thanks
Frenix27 said:
Hi all. I want to have stock rom on my evo 3d, but I want to flash another kernel to use beats audio. I understood that I can't flash another kernel on an old Ruu. Can u link me latest Ruu? And say me all I have to do to flash stock rom (latest), root and recovery, with another kernel naturally. Thanks
Click to expand...
Click to collapse
you can install a stock ROM, then flash chad goodman's stock kernel with beats drivers.
only change he made to it is the audio drivers. it will work with any ROM that is the latest RUU.
check out www.androidfilehost.com and browse to the directory of chad goodman. you will find it under the kernels directory.
Related
Sorry for the simple question.
Is it ok to flash a kernel over another kernal without flashing a rom?
So if im running LeeDroid's kernel can i kust flash kAmMa's Lightweight kernel overtop of it?
Thanks
hackit said:
Sorry for the simple question.
Is it ok to flash a kernel over another kernal without flashing a rom?
So if im running LeeDroid's kernel can i kust flash kAmMa's Lightweight kernel overtop of it?
Thanks
Click to expand...
Click to collapse
Yes... Just Boot into Recovery and Flash whatever Kernel your trying out! Just Make Sure its Not GSM if your phones CDMA and Vise Versa...
hackit said:
Sorry for the simple question.
Is it ok to flash a kernel over another kernal without flashing a rom?
So if im running LeeDroid's kernel can i kust flash kAmMa's Lightweight kernel overtop of it?
Thanks
Click to expand...
Click to collapse
If you have hboot 1.5 you have to use flashimage gui made by joeykrim on the market. It's a easy app and it safley flashes it for hboot 1.5 users since we still have s-on
so i unlock my HTC evo 3D last night and have root access not. i'm using TWRP 2.0 for recovery. i flash the evervolv ICS rom and then reboot my device and it just get stuck on the HTC white boot screen. is there an extra step to flash ICS or did i forget to do something. i'm able to flash other roms with no problems. any help would be great. thanks in advance
Try super wipe that usaly is comman issue
3P!C-JW0LF
i have hboot 1.5 as well. could that be why i can't flash ICS?
2000csi said:
i have hboot 1.5 as well. could that be why i can't flash ICS?
Click to expand...
Click to collapse
Yeah that's gonna be an issue, use flash image GUI to flash the kernel before you flash the Rom, meaning...while you're in your current Rom use flash image GUI and find your ics Rom and the app will take out the kernel and flash it. Then you need to go to recovery and flash the ics Rom
xcpefrmreality said:
Yeah that's gonna be an issue, use flash image GUI to flash the kernel before you flash the Rom, meaning...while you're in your current Rom use flash image GUI and find your ics Rom and the app will take out the kernel and flash it. Then you need to go to recovery and flash the ics Rom
Click to expand...
Click to collapse
got it thanks!!
I am S-On HBoot 1.15.
I had to flash a new boot.img for CM10 Nightlies to work. I understand that I will have to flash a Sense based Rom boot.img to leave CM10.
I want the new radios and kernel from the OTA. What do I do?
I saw pocketables had a way to do it, but I'm not sure this would work for me. Would I just need to flash a Sense boot.img first, go through their method, then flash the CM10 boot.img again and restore my CM10 back up?
Will the new OTA radios and kernel work with CM10 Nightlies?
Help, I am lost...
You may be able to use the Flash Image UI app in Google Play, with the 1.15 hboot. Try that, but play it safe and read up on the best practices to flash new kernels, etc. as you're playing with fire. You can get bricked.
Sent from my LTEVO via XDA Premium
Fastboot is the most reliable method. As always verify the MD5 to avoid problems
xuohtx said:
I am S-On HBoot 1.15.
I had to flash a new boot.img for CM10 Nightlies to work. I understand that I will have to flash a Sense based Rom boot.img to leave CM10.
Click to expand...
Click to collapse
HBOOT 1.15 and up do not allow for S-OFF, and HTCDev unlocking still does not allow the flash of new radios and the like. Because of this, taking the new OTA or running a RUU are the only way to update to the newest radio.
xuohtx said:
I want the new radios and kernel from the OTA. What do I do?
I saw pocketables had a way to do it, but I'm not sure this would work for me. Would I just need to flash a Sense boot.img first, go through their method, then flash the CM10 boot.img again and restore my CM10 back up?
Click to expand...
Click to collapse
That is probably the easiest way to do it. Flash (using fastboot) a sense kernel (boot.img), flash back to sense ROM, take OTA, then flash CM10 kernel and restore CM10 backup.
xuohtx said:
Will the new OTA radios and kernel work with CM10 Nightlies?
Click to expand...
Click to collapse
Radio: Yes. Kernel: No. You want to flash the CM10 kernel back before restoring your CM10 backup. I am running CM10 nightlies with the newest radio and PRI. I flashed them separately since I am S-OFF, and they work fine.
xuohtx said:
Help, I am lost...
Click to expand...
Click to collapse
Everyone gets lost at some point. Don't worry about it
I think the only way for s on people to get the new radio is to take the ota.. I recommend NOT doing this. This gives you the new hboot which will make it even less likely that you get s off. You can get the new kernel by fastbooting the boot.img of a Rom based on the new kernel and than flash the Rom in twrp. This is the smartest route in my opinion
Sent from my EVO using xda app-developers app
So i tried flash new kernel. And now it's just reboot all the time. Hboot 1.53.007. Clockworkmod recovery v5.0.2.0. Some one has good idea? :fingers-crossed: Sorry for bad english. I'm from finland if some one wants know.
zzrzr said:
So i tried flash new kernel. And now it's just reboot all the time. Hboot 1.53.007. Clockworkmod recovery v5.0.2.0. Some one has good idea? :fingers-crossed: Sorry for bad english. I'm from finland if some one wants know.
Click to expand...
Click to collapse
Which Kernel did you flash??
Your first thing you should do is restore a backup (Which you should always make before doing something dangerous like flashing.... Anything....)
If you don't have a backup, Reflash a rom, Any rom that you know will boot, The most stable closest to stock rom you can. I'm from the CDMA section so I don't know your roms.
If worse comes to worst, Find your correct ruu and flash that, It'll take you to 100% stock, and unroot you, But rooting is easy :silly:
AW: Booting evo 3d gsm
1.53 hboot isnt compatible to all roms (afaik only sense 3/3.6 based roms and the Viper sense 4.1 rom)
U would need to downgrade to 1.49 if u want to flash everything...
Which rom did you flash?
Quantenhall said:
1.53 hboot isnt compatible to all roms (afaik only sense 3/3.6 based roms and the Viper sense 4.1 rom)
U would need to downgrade to 1.49 if u want to flash everything...
Which rom did you flash?
Click to expand...
Click to collapse
He flashed a kernel not a rom.
AW: Booting evo 3d gsm
Quantenhall said:
1.53 hboot isnt compatible to all roms (afaik only sense 3/3.6 based roms and the Viper sense 4.1 rom)
U would need to downgrade to 1.49 if u want to flash everything...
Which rom did you flash?
Click to expand...
Click to collapse
my bad
In that case just try a different kernel
yoda kernel
Quantenhall said:
1.53 hboot isnt compatible to all roms (afaik only sense 3/3.6 based roms and the Viper sense 4.1 rom)
U would need to downgrade to 1.49 if u want to flash everything...
Which rom did you flash?
Click to expand...
Click to collapse
It was yoda kernel if I remember correctly.
You should Definitely grab the stock kernel when in a bad spot, I'd link it, But I don't have a GSM phone, I'm sure you can find it.
Be aware that the newer kernels are just for jelly beans Roms, also are you s-on, if so the kernel is not flashing correctly. I would also suggest updated your recovery to 4ext . If your s-on , 4 ext has smart flash which will flash the kernel correctly
Sent from my IdeaTabA2109A using Tapatalk HD
Hello, I just installed the Android Revolution Rom for my HOX+ international. I had Viper rom with Elitekernel... but I noticed that AR recommends stock kernel... Is there any way to install just the stock kernel? should I use firmware install tool and uncheck everything other than kernel? Or is there a boot.img that I could flash in fastboot that would take me back to stock???
Take the Boot.img out of the AR zip file
As far as i know it is the Stock kernel with just a few Tweaks
Skolotaie said:
Take the Boot.img out of the AR zip file
As far as i know it is the Stock kernel with just a few Tweaks
Click to expand...
Click to collapse
ARHD also works fine with the EliteKernel, but you have to use the 4.2.x version (it should be the same as for ViperX+). I used this combination for a long time until I switched to CarbonROM (also with EliteKernel).
elitekernel
I am currently using Elitekernel... but I noticed that the back of my phone will get really hot at times... I am not 100% sure this is kernel related... but I wanted to check... I will try switching to the boot.img from the ARHD zip