Hello, I just installed the Android Revolution Rom for my HOX+ international. I had Viper rom with Elitekernel... but I noticed that AR recommends stock kernel... Is there any way to install just the stock kernel? should I use firmware install tool and uncheck everything other than kernel? Or is there a boot.img that I could flash in fastboot that would take me back to stock???
Take the Boot.img out of the AR zip file
As far as i know it is the Stock kernel with just a few Tweaks
Skolotaie said:
Take the Boot.img out of the AR zip file
As far as i know it is the Stock kernel with just a few Tweaks
Click to expand...
Click to collapse
ARHD also works fine with the EliteKernel, but you have to use the 4.2.x version (it should be the same as for ViperX+). I used this combination for a long time until I switched to CarbonROM (also with EliteKernel).
elitekernel
I am currently using Elitekernel... but I noticed that the back of my phone will get really hot at times... I am not 100% sure this is kernel related... but I wanted to check... I will try switching to the boot.img from the ARHD zip
Related
Hi Everybody. As the title say, I am facing issues with the touch screen when i install Any CM ROM(FXP-Official)/AOSP. At the first boot I Can not unlock my phone or skip the "Tutorial". After Reboot the phone, the problem is still there
*I Flashed the BB recommend for each ROM (.72)
*I Installed the Respective Kernel via Fastboot:
- fastboot flash boot boot.img
Then
- fastboot boot boot.img
*I did a Full Wipe (Cache, Data, Dalvik)
*Format - System
*I flashed ROM
* And....Nothing
Any Solution? Anyone?
Thanks
EDIT. Every SE based ROMs (MIUI etc.) work without that BUG
EDIT. 03/03/13 AROMA Installer also does not work (Only with Vol and Menu buttons)
Jonfensu said:
Hi Everybody. As the title say, I am facing issues with the touch screen when i install CM9 FXP113/115. At the first boot I Can not unlock my phone or skip the "Tutorial"
I Installed the Kernel via Fastboot with Flash and Boot commands
I did a Full Wipe (Cache, Data, Dalvik)
Any Solution? Anyone?
Thanks
Click to expand...
Click to collapse
Flash right kernel inside rom.zip folder.
Sent from my MT15i using Tapatalk 2 Beta-6
taaviu said:
Flash right kernel inside rom.zip folder.
Sent from my MT15i using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
I know, I did that when i was installing FXP113 or 115 (With respective kernels) i mean the problem is with FXP Kernel and ROM .... Is there any patch or something?
UPDATE: Please Someone Help me... I tried the ICS Official Leak from here ,http://forum.xda-developers.com/showthread.php?t=1594651 and following the Instructions, i STILL get the same issue...: The Touch Screen Does not Work (Hardware buttons works) Anyone?
PS. With AOSP,Mooded and other ICS ROMs with Nightelf,Pwn etc Kernels i don't have that issue
I have the same problem with Cm7, CM9 and MIUI and its kernel in the zip file, but I can not find solutions. My touch screen works only with stock rom or with official Ics kernel beta and Ics rom official and hybrid rom. Solutions?
Sent from my MT15i using XDA
sorry for my bad English
Sent from my MT15i using XDA
ash6088 said:
I have the same problem with Cm7, CM9 and MIUI and its kernel in the zip file, but I can not find solutions. My touch screen works only with stock rom or with official Ics kernel beta and Ics rom official and hybrid rom. Solutions?
Sent from my MT15i using XDA
Click to expand...
Click to collapse
Sure you did flash custom kernel with "fastboot flash boot boot.img"?
Sent from my MT15i using Tapatalk 2 Beta-6
HiTaaviu,I flashed the costum kernels included in the zip file CM9, CM7, and I also tried Pwn and NightElf kernel, but the touch screen does not work with MIUI cm7 and CM9, touchscreen only works with the stock rom and MooDeD ICS ROM, JJ's HYBRID ROM, AOSP 4.0.3 ICS, ICS SE Beta official with the official kernel ics of sony.
then the problem is not flash the kernel, because ics official kernel works perfectly and then flash the kernel run correctly. But why with the other kernel touch screen wrong?
I do not know how to do it, I can not find any solution!
ash6088 said:
HiTaaviu,I flashed the costum kernels included in the zip file CM9, CM7, and I also tried Pwn and NightElf kernel, but the touch screen does not work with MIUI cm7 and CM9, touchscreen only works with the stock rom and MooDeD ICS ROM, JJ's HYBRID ROM, AOSP 4.0.3 ICS, ICS SE Beta official with the official kernel ics of sony.
then the problem is not flash the kernel, because ics official kernel works perfectly and then flash the kernel run correctly. But why with the other kernel touch screen wrong?
I do not know how to do it, I can not find any solution!
Click to expand...
Click to collapse
Pleas write here steps "how do you install MIUI or cm7-9 rom"
Thanx
Etc..
1.downloaded rom xxx.zip
2. kernel xxx.img
3. wipe?
How installed kernel/rom.
Ok, this is the procedure I follow:
1 -Flash .42 with Flashtool
2-Root
3-Unlock bootloader with fastboot (fastboot.exe-i 0x0fce oem unlock 0xMykey)
4-Install cwm recovery
5-Iput zip file downloaded to sd (ex. update-cm-7.1.0-XperiaNeo-MT15i-signed)
4-I put the kernel included in the zip into the fastboot folder and flash (fastboot flash boot boot.img)
6-I go into recovery and wipe data / factory reset, wipe cache and wipe Dalvik cache
7-Flash zip rom and GAPPS
8-Reboot
9-Phonework but touch screen does not work
I tried with pwn kernel and other but it is the same thing!
The situation that presents itself is equal to this video:
Boot ZTE Blade / Oranage San Francisco (B10) with custom rom with working touch screen(Search in youtube)
I also tried to use the technique in the video but without battery Xperia neo will not turn on.
I do not understand where I'm wrong!
First of all flash .62 ftf by flashtool...then flash the respective custom kernel for the rom...wipe everything and also format everything in cwm ...all custom kernels are pre rooted and cwm recovery ready...now flash the rom and see if it works.
Sent from my MT11i using XDA
Cm7 cm9 n miui need .64 baseband not .42 so flash the
Baseband of .64 or rather fresh install .62 firmware
Sent from my MT11i using XDA
I have flashed .64 firmware official, then i have flashed kernel included in the zip file of CM7.1.0.1, then i have format and wipe everything and flashed rom, but Touch doesn't work!!
Same thing with CM9!
I do not know what to invent to make it work!
Then some experienced dev is needed here...they can give some advice.
Sent from my MT11i using XDA
Some developer, PLEASE.... HELP US!!
ash6088 said:
I have flashed .64 firmware official, then i have flashed kernel included in the zip file of CM7.1.0.1, then i have format and wipe everything and flashed rom, but Touch doesn't work!!
Same thing with CM9!
I do not know what to invent to make it work!
Click to expand...
Click to collapse
Is zdunex miui ics working?
It uses stock kernel.
Sent from my MT15i using Tapatalk 2
If I use the stock kernel the touchscreen works perfect, but only with the stock kernel
The problem is still here... I tried Every ROM based on CM9 (since FXP129 to CM9 RC2 Official) or AOSP (Polish Blood 4.04) and don't work... Others ROM based on SE (MIUI etc.) Work flawless... WE NEED SOME DEVS HERE, Please...
please, no one can solve this problem ???
Lemme try.
Flash the latest Stock firmware. Boot it up, and go thru the whole setup process. Stock FTF usually got no probs when it comes to hardware.
Run the phone in Stock for awhile (1-2mins), then shut it off. Go into fastboot mode (press and hold "Menu" button while plugging into PC) and flash the kernel from the LATEST version of the ROM you want to use (FXP146 for CM9.1/CM10, FXP110 or something for CM7.2, MIUI2/MIUI4/MIUI4.1). It is usually in the zip itself or the dev would have recommended a kernel. If you don't know how to flash the kernel, PM me.
Boot up phone into recovery, flash new ROM, flash gapps, reboot phone.
BOOM all should be ok
Hi all. I want to have stock rom on my evo 3d, but I want to flash another kernel to use beats audio. I understood that I can't flash another kernel on an old Ruu. Can u link me latest Ruu? And say me all I have to do to flash stock rom (latest), root and recovery, with another kernel naturally. Thanks
Frenix27 said:
Hi all. I want to have stock rom on my evo 3d, but I want to flash another kernel to use beats audio. I understood that I can't flash another kernel on an old Ruu. Can u link me latest Ruu? And say me all I have to do to flash stock rom (latest), root and recovery, with another kernel naturally. Thanks
Click to expand...
Click to collapse
you can install a stock ROM, then flash chad goodman's stock kernel with beats drivers.
only change he made to it is the audio drivers. it will work with any ROM that is the latest RUU.
check out www.androidfilehost.com and browse to the directory of chad goodman. you will find it under the kernels directory.
I have installed CM9 and not really satisfied after using it for 1 day... its quite unstable... now i want to downgrade to my stock rom. Is that possible? Please help.
tpteam6 said:
I have installed CM9 and not really satisfied after using it for 1 day... its quite unstable... now i want to downgrade to my stock rom. Is that possible? Please help.
Click to expand...
Click to collapse
You are joking right?
Have you tried this CM9/
Neo
Neo V
Its the OFFICIAL STABLE cyanogenmod for the NEO. It is VERY STABLE and has everything working.
Apart from that, to revert back to stock, just flash a stock kernel (Or any modded kernel for stock) and restore the backup you made before flashing the cm9 rom.
tahnks
gregbradley said:
You are joking right?
Have you tried this CM9/
http://download.cyanogenmod.com/?type=stable&device=hallon
Its the OFFICIAL STABLE cyanogenmod for the NEO. It is VERY STABLE and has everything working.
Apart from that, to revert back to stock, just flash a stock kernel (Or any modded kernel for stock) and restore the backup you made before flashing the cm9 rom.
Click to expand...
Click to collapse
The roms that you have suggested are for "neo". i am using "neo v" and the reson i wanna go back to stock is because i con not onnect to my gmail account with cm9 over data connection. Its giving me some sort of an error: can not establish reliable connection....."...
now for going back to stock ics can i just flash it via cwm and i will be back in stock ics? dont i need to flash karnel or anything like that?
tpteam6 said:
The roms that you have suggested are for "neo". i am using "neo v" and the reson i wanna go back to stock is because i con not onnect to my gmail account with cm9 over data connection. Its giving me some sort of an error: can not establish reliable connection....."...
now for going back to stock ics can i just flash it via cwm and i will be back in stock ics? dont i need to flash karnel or anything like that?
Click to expand...
Click to collapse
I just added the link for the neo v
Yes, you need stock kernel.(or modded kernel for stock roms)
The kernel for CM will not work with stock rom.
My suggestion is to try the stable cm9 for neo v from my link. If you are still unhappy then download a stock kernel, flash it it fastboot then restore your stock backup in recovery.
Do remember, if you flash stock kernel you will have to install a recovery. Or you can flash the alliance kernel from this thread
Tahnks
gregbradley said:
I just added the link for the neo v
Yes, you need stock kernel.(or modded kernel for stock roms)
The kernel for CM will not work with stock rom.
My suggestion is to try the stable cm9 for neo v from my link. If you are still unhappy then download a stock kernel, flash it it fastboot then restore your stock backup in recovery.
Do remember, if you flash stock kernel you will have to install a recovery. Or you can flash the alliance kernel from this thread
Click to expand...
Click to collapse
well i think im in trouble now... i havent kept any backup of the stock rom. So cant i just flash the stock karnel then install the stock rom via cwm?
tpteam6 said:
well i think im in trouble now... i havent kept any backup of the stock rom. So cant i just flash the stock karnel then install the stock rom via cwm?
Click to expand...
Click to collapse
Rule number 1
Always backup, just in case you **** up!
Anyway, no problem, there are several options.
Find a stock .ftf in the dev section and flash that in flashtool after you have flashed the stock kernel.
Or, repair phone software using PCCompanion.
This will revert your phone to factory settings (Out of the box).
Or just follow the instructions in any "stock" based custom rom. I recommend Ice cream Pureness. Its a very good stock ICS based rom, fully functional and stable
tutorial
gregbradley said:
Rule number 1
Always backup, just in case you **** up!
Anyway, no problem, there are several options.
Find a stock .ftf in the dev section and flash that in flashtool after you have flashed the stock kernel.
Or, repair phone software using PCCompanion.
This will revert your phone to factory settings (Out of the box).
Or just follow the instructions in any "stock" based custom rom. I recommend Ice cream Pureness. Its a very good stock ICS based rom, fully functional and stable
Click to expand...
Click to collapse
is there is any specific tutorial on this? or download links for .ftf, stock karnel?
thanks... i have flashed stock karnel then installed stock rom... it worked like charm!!...
Hello,
Today i downloaded NeatRom ( android 4.4.4) For the battery life etc etc,
And i also read that the dorimanX kernel is battery friendly, but where do i get the one for my android 4.4?
I have now a kernel installed ( CM recovery+ kernel for Kitkat -odinflashable), The version of CWM is v6.5.0.1.
Please help me
Jason
jasondutch said:
Hello,
Today i downloaded NeatRom ( android 4.4.4) For the battery life etc etc,
And i also read that the dorimanX kernel is battery friendly, but where do i get the one for my android 4.4?
I have now a kernel installed ( CM recovery+ kernel for Kitkat -odinflashable), The version of CWM is v6.5.0.1.
Please help me
Jason
Click to expand...
Click to collapse
Get 10.44v008 from here -
http://www.dorimanx.ataliba.net/
I would assume it will work, I have used it with other aosp 4.4.4 roms, but I haven't used neat rom.
noppy22 said:
Get 10.44v008 from here -
http://www.dorimanx.ataliba.net/
I would assume it will work, I have used it with other aosp 4.4.4 roms, but I haven't used neat rom.
Click to expand...
Click to collapse
Can i flash it without losing clockworkmod v6.5.0.1?
EDIT:// My odin v3.09 doesn't see the zip package.. how is that possible?
EDIT:// 2 Can i also put a custom bootanimation on my phone with the dorimanx kernel?
jasondutch said:
Can i flash it without losing clockworkmod v6.5.0.1?
EDIT:// My odin v3.09 doesn't see the zip package.. how is that possible?
EDIT:// 2 Can i also put a custom bootanimation on my phone with the dorimanx kernel?
Click to expand...
Click to collapse
I think dorimanx will replace your cwm with its own version(I am on 6.0.4.8), but there is not much difference. You can always flash the newer version if you really need it.
Odin won't see it as it is not a .tar file, just flash it from recovery. It is recommended if you are not re-flashing the rom to use the kernelwipe script from @hawkerpaul to make sure there are no issues from residual files from the old kernel.
I don't know about a custom boot-animation, it may be possible but not something that is a feature of the kernel
Sent from my GT-I9100 using XDA Free mobile app
Hey,
Thanks for your help,
So i just need to re-install my ROM after flashing the kernel?
jasondutch said:
Sent from my GT-I9100 using XDA Free mobile app
Hey,
Thanks for your help,
So i just need to re-install my ROM after flashing the kernel?
Click to expand...
Click to collapse
No, that would install the stock kernel again. If you have been using the rom as is for a while I would use the kernelwipe script, then just flash the dorimanx kernel from recovery, then just reboot into system. You can flash the kernel without the script but you run the risk of bugs because of left over files from the previous kernel.
noppy22 said:
No, that would install the stock kernel again. If you have been using the rom as is for a while I would use the kernelwipe script, then just flash the dorimanx kernel from recovery, then just reboot into system. You can flash the kernel without the script but you run the risk of bugs because of left over files from the previous kernel.
Click to expand...
Click to collapse
Alright thanks,
Unfortuanely my phone screen died
When its repaired i download the kernel instantly
I have been using blu_sp★rk onyx kernel for quite some time and wanted to go back to my stock kernel. So I used Flashify and restore my stock kernel.
The thing is once back to stock kernel, my WIFI doesn't turn on. Any idea how to get it working again? Do I need to re-flash my stock ROM then flash the stock kernel again?
Also, anyone have other suggestion for kernel with good battery performance?
I had the same problem a couple of times, you have to flash all the ota files via twrp or stock recovery
U use f2fs ??if yes tht make ur wifi dosnt turn on bcoz stock kernel dsnt support f2fs
vanrey211 said:
I have been using blu_sp★rk onyx kernel for quite some time and wanted to go back to my stock kernel. So I used Flashify and restore my stock kernel.
The thing is once back to stock kernel, my WIFI doesn't turn on. Any idea how to get it working again? Do I need to re-flash my stock ROM then flash the stock kernel again?
Also, anyone have other suggestion for kernel with good battery performance?
Click to expand...
Click to collapse
Also, as of right now, blu spark is the only custom kernel available for the OPX. in addition, its only compatible stock rom at the moment.
Mojar7070 said:
Also, as of right now, blu spark is the only custom kernel available for the OPX. in addition, its only compatible stock rom at the moment.
Click to expand...
Click to collapse
Thanks for the response guys. Good thing I did backup all the stock rom and kernel via twrp. I'll give it a go during weekends. Still loving the blu spark kernel, re-flashing the ROM doesn't remove all my data right? Also, is that the [X]system for ROM? I know [X]boot is the kernel.. under restore/backup in twrp.
hey guys.
i just flashed blu sparks kernel over Nougat Rom 7.0 on my nexus 5.
i've already did a backup to my stock Rom 6.0.1 via TWRP.
i want to restore to stock,
i'm wondering if i can just restore the backup via TWRP or do i have to Fatsboot system.img?
since i'm familiar with flashing and Doing Commands