I'm trying to run revolutionary 04 pre 4 in windows 7 32 bit but every time try to run as admin the cmd page opens but then closes straight away what am doing wrong
rasp54 said:
I'm trying to run revolutionary 04 pre 4 in windows 7 32 bit but every time try to run as admin the cmd page opens but then closes straight away what am doing wrong
Click to expand...
Click to collapse
Have you tried running it normally (not as admin) then?
I am a idiot thanks for the suggestion M8 done that and followed the instructions and loaded on my HTC BRAVO. I am trying to use the sim unlock utility .
HTC Desire SIM-Unlock Utility v0.9.5
by sieempi
Found HTC Desire (Bravo) with serial number:
Your phone will restart to hboot and then shortly reboot to Android.
Although this is a brick-free solution, do not disconnect the phone from the
computer during this procedure, nor navigate in hboot menu.
Error 13a: AdbReadEndpointSync returned error 31
Waiting for hboot!
....................................................
It sticks on hboot and and it will go no further
Thanks again for your advice
Forgot to say when it goes into hboot it shows revolution in pink on top ans s-off
rasp54 said:
Waiting for hboot!
....................................................
It sticks on hboot and and it will go no further
Thanks again for your advice
Click to expand...
Click to collapse
Does your device boot into HBOOT?
goes into hboot usb plug which is highlighted in blue with fastboot when i take usb cable out goes back to hboot
rasp54 said:
goes into hboot usb plug which is highlighted in blue with fastboot when i take usb cable out goes back to hboot
Click to expand...
Click to collapse
It's better if you state your problem in the tool's thread: http://forum.xda-developers.com/showthread.php?t=943726 .
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Right i have tried the iso version by sieempi says errors about five times but then says success.
Before it said no sim card in phone but now it picks up a tesco sim and a orange sim and puts the details in automatically but still says emergency calls only although in the APN it inputs the data for the sim card.
I have an orange pay as you go sim in at the moment picks it up in APN and network providers but it will not let me use it say your sim card cannot be used or try to connect later cannot connect at this time
I Have flashed with cynagenmod nightly update rom
ATTENTION: Due to the lack of time, to which I sincerely apologize for, I am no longer able to maintain this guide. Also, I am no longer answering PMs in reference to help with this guide. I apologize, but life's a little hectic for me at the moment. Thank you all that have read my guide and if you would like to take over for this guide and update it, please PM me. Thank you!!
Hello everyone! Figured I'd put together a step-by-step guide for those trying to figure out how to install HSPL and roms onto their AT&T branded HTC Titans.
************STOP AND PLEASE READ BEFORE PROCEEDING************
You are currently required to debrand your phone. DO NOT continue further with this guide if you do not wish to remove your AT&T branding.
This guide is NOT for the HTC Titan II. There is currently, to my knowledge, no way in being able to install HSPL on the Titan II as of this time. So please, do not even attempt to go through with this guide with your Titan II. Not only will it not work, but you never know if doing so will damage your phone.
***For the record, you CANNOT hold me nor those credited below responsible for any mishaps and/or catastrophic failures with your phone. Not even when T-800s start to emerge from your phone! You are following this guide at your own free will and discretion, and as such, it is your own responsibility if you break your phone. PLEASE, PLEASE, PLEASE: read this guide slowly and carefully. Read it through several times, just so you are absolutely sure you understand the instructions. If you feel as though you're not entirely sure what to do on this guide, DO NOT PROCEED FURTHER. Instead, you may post your question down below and I'll try to answer it as best as I can. But I cannot guarantee you an answer nor any help in general. You have been warned.***
************Continuing with this guide means you've understood the warnings and accept all responsibility for your actions************
Pre-installation notes: Due to how the process is still somewhat finicky at best, this guide is NOT guaranteed to work. Also, you have no choice at this time besides having to make a goldcard. There's just no other way.
Also, as listed in DFT's thread: Only Titan phones that have the following MIDs will work: " 'PI39****", 'PI391100', "PI391000' " Also, they've posted an issue about not updating to 4.xx.xxxx.xx roms, as there is an issue with this. Please thoroughly read the thread before proceeding: http://forum.xda-developers.com/showthread.php?t=1684912
However, if you do follow the guide properly and with a little lady luck on your side, this guide should help you debrand your Titan, as well as install HSPL on it. If I am missing anything about this guide, please inform as soon as possible, as so I can update this guide accordingly and credit you.
Also, for those looking for a more visual aid, please view Budniu's video on downgrading SPL's and using the goldcard method down below past the written instructions. If they helped you, please thank him!!
Requirements:
Hardware:
-Y-USB cable. I actually made my own easily. I'll post pictures in the following post on how to make your own without soldering.
-1 or 2 gb SD or microSD card. To my experience and knowledge, SDHC and SDXC cards DO NOT work. I wasted money figuring that out the hard way. The way it worked for me was with a 2gb microSD card from Sony that came with the SD card adapter.
-SD card reader, preferably a single-SD card port on it. In my experience, I tried two multi-card readers with no avail. I purchased a regular SD card reader and it worked wonders.
-Optional: Flash drive*
*This is optional, due to the fact that I never had any luck in using a flash drive as my gold card. It may or may not work for you, but the chances of it not working are higher than getting an SD card that won't work. At least, that's just how my experience with this went.
Software (links provided below):
-HTC Eternity EU official rom 1.09.401.02, link will be provided once upload is complete. File size is 410 mb, so be forewarned.
-Goldcard maker
-Goldcard image
-DFT's HSPL
-Optional: HTC Eternity Cingular rom & RUU*
*There is a possibility trying to debrand the phone without downgrading your SPL first may or may not work. When in doubt, it would be better to first flash this image first on your phone before proceeding any further. If your SPL is 1.10.xxxx.xx or lower, you may skip this process.
UPDATE: As found by XDA member Prerna, you do not need to downgrade with a stock Cingular rom prior to flashing a stock Euro rom. Thank you!
UPDATE #2According to both members from different threads, as well as those that have contacted me about this, you are no longer able to download the European rom from its original location. I have thus uploaded it via DropBox, and a link to the download has been provided below. Thank you for notifying me!
*Update*: I forgot to add this, which may account to the gold-card method not working out for you, but you must change the name of the rom you are putting on the SD card BEFORE you make it a goldcard to "ETERIMG.nbh". Otherwise, the phone will most likely not be able to read the .nbh file. Sorry for this!!
Instructions for debranding:
I. Backup anything you don't want to lose from your phone. This process will delete everything.
II. Step Two has been removed as it is now a unnecessary step in this process as noted above.
III. Create your goldcard and debrand your phone:
Note: As mentioned by Prerna, he noted that a manual reboot after using the goldcard method was required. In my case, my phone rebooted on its own; perhaps this may have been just a fluke, I'm not entirely sure. However, based on how sure he was about this, I would then like to add that it is more than likely that you are required to reboot the phone from USB host mode manually to the SPL screen after flashing.
i. Insert your SD card into your card reader and plug into your computer. If you're using a flash drive, just follow this guide the same way.
[*]ii. Once your memory shows up completely, go to "My Computer", right click on where your SD will be shown, and click on "format". Make sure that under "File System" says "FAT32" and under"Allocation unit size" is "4096". IT CANNOT BE ANYTHING ELSE. Whether or not these settings were enabled, select "Start", only if "Quick Format" is selected. Once it completes formatting, time to find your downloaded goldcard maker.
[*]iii. Open up the goldcard maker by right-click, select "Run as Administrator". When it opens, make sure your SD card appears in the drop-down box next to "HTC MMC:".
[*]iv. Ignoring the top portion with the CID options, go down to where it says "Load GoldCard.img". Wherever you downloaded the goldcard image, select it and click "open".
[*]v. Click on "Patch MMC" and wait for it to complete. The debug log window will let you know whether or not your card was successfully completed.
[*]vi. Once you successfully made your goldcard, you will then drag and drop the .nbh image file into the SD card. Once completed, safely eject your SD card and reader.
[*]vii. Next, plug the reader with the card into one of the female ends of your y-cable (assuming you either purchased one with a female end on it or you followed my guide below). With the power-only male end of your cable, plug that either into a wall charger or into your pc (preferably a back port if on a desktop).
[*]viii. Next, you want to power off your phone, give it a kiss, and boot it into USB-Host mode. The way I did this was while holding the Volume-Down button and the Camera button, I plugged my micro-usb end into the phone, while the micro-usb cord was plug into my y-usb cable. This will make the phone boot on its own and into USB-Host mode.
[*]ix. If you did the following correctly, your phone will display "Entering USB-Host mode..." momentarily, before switching to a "loading" screen. You should hopefully then see the phone reading the image file on the SD card and performing the debranding. Your phone will reboot one or two times back into USB mode.
[*]x. If the debranding was a success, your phone *will reboot back into SPL mode with the update rom version*. In my case, I rebooted my phone back to normal instead. If the startup screen says "HTC X310e", then the debranding is a success.
*As mentioned above, it is more than likely that the phone WILL NOT reboot back to SPL mode on its own. In my experience, it did. Either way, if your phone does not reboot back into SPL mode on its own, then simply reboot the phone back into SPL mode via Volume UP+DOWN+Power button.
IV. Goldcard part II:
i. After confirming that you DO now have an unbranded Titan, you will now proceed to redoing the gold card method once more. This time, however, you need to delete the .nbh image you placed on your card and place the one that can be found in the DFT .rar you downloaded earlier. To find it, simply extract the contents, navigate through >DFT_HSPL_WP7SG1>1_SPL205>TITAN>ETERIMG.nbh.
[*]ii. Select this file and place it onto your goldcard (assuming you plugged it back into your computer properly (not attached to the y-cable) and deleted the previous ETERIMG.nbh file on it.
[*]iii. Once it's on the SD card, remove it once again and follow steps "vi." through "viii." of the steps for the goldcard instructions, disregarding anything about it being debranded. This is only an upgrade flash.
[*]iv. Once it reboots properly back into the SPL screen on its own**, make sure that the rom version has been updated to 2.5.xxxx.xx. If not, you may have done something wrong, and if you're able to, redo the process more carefully.
**Again, as mentioned above, I've been told that this isn't entirely true. It's more than likely that the phone will not reboot back into SPL mode after flashing. If it hasn't, manually reboot into SPL mode. I apologize for any confusion this may have caused.
V. HSPL
i. Once confirming you have 2.5.xxxx.xx on your SPL screen, you will now proceed to the final part: enabling HSPL. What you will need to do is navigate once more into "DFT_HSPL_WP7SG1" (the .rar file you downloaded from DFT), and go here: >DFT_HSPL_WP7SG1>2_HSPL>DFT_HSPL_WP7SG1_INSTALL.exe. Open the executable and properly read the instructions.
ii. Enter SPL once more on your phone and plug it into your computer, making sure that it says "usb" in black letters towards the bottom portion of the screen.
iii. Click next on the program and read careful about what requirements you will need on the computer. Typically, it should all be there, but it never hurts to make sure.
iv. Take a deep breath and click next. It will attempt to connect to the phone. If it succeeds, continue reading the instructions the program will display. If it does not work, recheck your wire connection and that you have spl 2.5.xxxx.xx on your device, and that it is in SPL mode.
v. Make sure you select the rom version that you have (it should be the only selection there, but just make sure it is before continuing). Select next once you've made your selection.
vi. It will install HSPL. Once completed, the phone may reboot itself back into SPL mode. If it has succeeded, underneath where it shows your rom version, it will either have "DFT" or "CotullaH" written there. Mine says "CotullaH".
VI. Finished!
-If there's anything that I may have missed whilst writing this guide, please do not hesitate in leaving a reply in this thread. As you can see, it is somewhat long and complicated, and I wouldn't be surprised if I had forgotten to add something. So please, let me know so I can update this guide as well as give you credit. Thank you and congratulations if the guide worked!!
Visual aid provided by Budniu:
Post-installation notes: As stated above, this is NOT guaranteed to work. It had happened to work out for me quite well and figured that perhaps this may work for others as well.
Thanks notes: As I've been here for about a year or two but haven't really posted much, I don't entirely care whether or not I receive any thanks. But if this guide worked for you, then it would be mucho appreciated Also, you should thank those who I've credited down below for their contributions in making this guide possible for you guys. They deserve it 100%. Downloads are just past the credits. Happy flashing, everyone!!
Credits: The following people/teams are to be credited for their contributions to this guide as follows:
-Team DFT > for creating this HSPL method possible for our Titans!
-MarysFetus > for his excellent guide on how to make and use a goldcard (http://forum.xda-developers.com/showthread.php?t=1597837)
-Football > for providing the community with the original shipped Eternity roms
-jbowes > for his excellent guide on how to make your own y-usb cable: http://www.youtube.com/watch?v=p10LgZFIawo
-Budniu > for providing an excellent video guide on how to install HSPL via goldcard method for WP7 phones.
-Prerna > For his findings and contributions to this guide!
- And anyone else I may have forgotten to mention. If so, please just leave a post below and I'll credit appropriately!
DOWNLOADS LINKS:
-DFT HSPL and 2.05 SPL: http://forum.xda-developers.com/showthread.php?t=1684912
-Goldcard maker & image: http://forum.xda-developers.com/showthread.php?t=1597837
-Cingular Eternity Rom: http://forum.xda-developers.com/showthread.php?t=1334468
-European Eternity Rom: No longer uploading the file for some time, if I have the time, I'll upload it onto a storage website.
Thanks!
Thank you so much- just what I needed.
Will attempt this as soon as my Y-cable arrives.
Also I heard report that usb flash sticks also works.
Nice tutorial. (+) for your hard work.
zup2sky said:
Thank you so much- just what I needed.
Will attempt this as soon as my Y-cable arrives.
Also I heard report that usb flash sticks also works.
Click to expand...
Click to collapse
Yeah I should have made a note about that as well. However, when I attempted to use a flash drive, it had never worked for me. I must've tried 8-10 old 1gb-2gb drives, no avail.
Budniu said:
Nice tutorial. (+) for your hard work.
Click to expand...
Click to collapse
Thank you! And I'm just glad someone liked it, that's all haha
pbp8ntballer said:
Thank you! And I'm just glad someone liked it, that's all haha
Click to expand...
Click to collapse
All the more glad to give you the first (+). :good:
If you want you can add my movie to first post:
Added your video and credited you appropriately for it, thank you!
xda changed theme i think .. looks old . no thanks button .. thanks for your TUT
edit - got it it goes to classic ..
i'd be interested in knowing whether anyone followed this tutorial and have successfully installed HSPL
error spl 2.5
friends and create my gold card install remote loading I get says other things restarts and returns to be in USB mode and does nothing but reboot and I get so spl is spl 2.5 but the problem is when q command to install the HSPL q tells me is installed perfectly but when it restart and put it in mode q spl again tells me this HSPL installed 2.5 but does not tell me anything under no bone or serial or uSB aparese and connect to the pc and not reconose someone this happened to you ..?
car3926 said:
friends and create my gold card install remote loading I get says other things restarts and returns to be in USB mode and does nothing but reboot and I get so spl is spl 2.5 but the problem is when q command to install the HSPL q tells me is installed perfectly but when it restart and put it in mode q spl again tells me this HSPL installed 2.5 but does not tell me anything under no bone or serial or uSB aparese and connect to the pc and not reconose someone this happened to you ..?
Click to expand...
Click to collapse
I'm going to guess what happened, since it's somewhat difficult understanding your writing, but I have a feeling you might have done something wrong and semi-bricked your phone. If you can only see the first two lines when going into SPL mode, I'm pretty sure you bricked it. At this point, you might be able to try to downgrade to a stock Euro rom, but I cannot say that it'll definitely fix it =/ sorry.
Does anyone know if this will work for Titan II also?
Thanks
Ugh none of my flash drive or card reader works. Can anyone who successfully debranded their HTC titan recommend me something?
edited thanks
edited
this is how it looks while loading , remember to change the name of the file to ETERIMG
ok here is where i am
it says titan x310e its booting up very good
but look at this
i installed the hspl from cotulla but it doesnt say cotulla
now can i try to install a custom rom?
ok after all of this i can say that i cant install a custom rom
0% thats it can load a custom rom
at least i have now a x310e
which sd card/ flash drive/ or multi reader did you use to get past enter usb host mode
zup2sky said:
which sd card/ flash drive/ or multi reader did you use to get past enter usb host mode
Click to expand...
Click to collapse
It might pay to re-look at the steps you did to make your gold card before trying different sd cards. First, is the timing of copying ETERIMG.nbh file- original instruction of making gold card from MaryFetus is to copy first the .nbh file into the msd card then run gold card tool to patch the card. Or try running the gold card tool first and once this is completed then copy ETERIMG.nbh file into the msd card (goldcard). The latter step works for me recently to get rid of F400. See if this works for you. Goodluck.
habnzrot said:
It might pay to re-look at the steps you did to make your gold card before trying different sd cards. First, is the timing of copying ETERIMG.nbh file- original instruction of making gold card from MaryFetus is to copy first the .nbh file into the msd card then run gold card tool to patch the card. Or try running the gold card tool first and once this is completed then copy ETERIMG.nbh file into the msd card (goldcard). The latter step works for me recently to get rid of F400. See if this works for you. Goodluck.
Click to expand...
Click to collapse
no avail. I might try Kingston data traveler or SanDisk cruzer where people reported success. If anyone else like to chime in and add working flash drive or reader help yourself
---------- Post added at 03:17 AM ---------- Previous post was at 02:42 AM ----------
Could my Y-Cable I purchased from Ebay be faulty?
When I connect my Y cable to computer, one cable reads my Flash Drive fine, however, if I connect to the other cable (using usb gender converter) the Flash Drive lights up but it isn't read by my computer (just powers on)
Is this normal?
Hello,
I am running Stock, Gingerbread ROOTED ROM, and when i use the ControlBear tool, the cmd dialogue says:
=== Waiting device....
(5/45)
Fastboot detected
Rebooting device
Please wait....
(6/45)
Found device...
Waiting for device to settle...
Getting into bar.....
Raising Glass
SUCCESS - Taking a sip.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Buddies and Beer
Checking alcohol level......
Let's take one more......
S-OFF Failed
Errorcode: 66732337
ErrorMsg: Still sober
Quit....
Press ENTER to exit.....
The S-Off Fails, and when it reboots, it keeps going back to the black screen and the JuopunutBear Logo in the middle. What is going wrong?
PLEASE HELP
----
by the way, could it be because the battery wasn't fully charged? My phone is pretty much unusable right know, and its plugged into the wall, but the bootloader screen stays on.
You do realize there's a thread were you can ask these type of questions correct?
And if only you would of goggled "ControlBear tool Errorcode: 66732337" you would of gotten your answer. HOW COOL IS THAT?
Sorry to be a ***** and i apologize.
But in the nice side of me. You got that error because you didn't do the wire trick correctly. As in you didn't type it right,.
Just keep trying until it says success.
thanks, but what do you mean by "i didn't type it right", and that "i did the wire trick wrong". Can you please explain how i am supposed to do those steps correctly?
spbobpilot said:
thanks, but what do you mean by "i didn't type it right", and that "i did the wire trick wrong". Can you please explain how i am supposed to do those steps correctly?
Click to expand...
Click to collapse
For the "I didn't type it right" part it was suppose to say you didn't do it right.
And with the wire trick. Look it up on YouTube. And you'll see how its done. Doesn't matter if its not the same phone the wire trick is done the same way. Just make sure you put your wire in the right pin.
If you have no idea what in talking about go look at the s-off thread for instruactions.
Sent from my PG86100 using Tapatalk 2
spbobpilot said:
Hello,
I am running Stock, Gingerbread ROOTED ROM, and when i use the ControlBear tool, the cmd dialogue says:
=== Waiting device....
(5/45)
Fastboot detected
Rebooting device
Please wait....
(6/45)
Found device...
Waiting for device to settle...
Getting into bar.....
Raising Glass
SUCCESS - Taking a sip.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Buddies and Beer
Checking alcohol level......
Let's take one more......
S-OFF Failed
Errorcode: 66732337
ErrorMsg: Still sober
Quit....
Press ENTER to exit.....
The S-Off Fails, and when it reboots, it keeps going back to the black screen and the JuopunutBear Logo in the middle. What is going wrong?
PLEASE HELP
----
by the way, could it be because the battery wasn't fully charged? My phone is pretty much unusable right know, and its plugged into the wall, but the bootloader screen stays on.
Click to expand...
Click to collapse
Follow these instructions and then when your done click evo3d cdma on the bottom for the instructions on how to do the wire trick correct. Remember to get the trick right you have to tap both wires down and lift the one connected to the memory card casing for almost 2 seconds and then re tap it and keep it pressed till the phone reboots.
http://unlimited.io/juopunutbear-public-beta-0-1/instructions/
Here is a video from youtube that will guide you through all the steps.
http://www.youtube.com/watch?v=tRj47iFQvbE
If you see the following message from ControlBear after doing the wire trick:
ErrorMsg: Still sober.
This means that you have been unsuccessful in implementing the wire-trick. Run ControlBear again.
The usual cause for this is that you failed to perform 2 clean contacts or mis-timed the wire trick.
Also remember to get an insulated wire I used scotch tape on a small paper clip and it worked perfectly
my phone is htc evo 3d rooted hboot 1.53.0007 . now i try to switch-off , i use the wire trick but when the program say to do wire trick i firstly put the wire in first pin when the pin touch metal phone vibrate and restart and programm start reconnecting after connecting i face same problem. plz help i m in trouble what can i do plzzz help .... how can i do my phone in working postion.....
plz help in detail...
i download PG86IMG.zip(343mb) but hboot after scanning saY wrong or no image
after sometime i face that-
"""========= ControlBear 0.11 beta for JuopunutBear S-OFF ==========
(c) Copyright 2012 Unlimited.IO
If you have acquired this software from anywhere
other than our website this version may be out of
date and unsupported. Please see our website for
instructions on how to use this tool and for support.
This program may not be redistributed or included in other
works without the express permission of Team Unlimited.
www.unlimited.io | [email protected]
Starting up......
Connecting to device...
Searching device.....
Found device.....
Found backups!
Making room for beer......
Loading sixpacks on sdcard......
Loaded......
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
=== Waiting for device....
(5/45)
Fastboot detected
Rebooting device
Please wait....
(6/45)
Found device...
Waiting for device to settle... Please wait...
Getting into bar.....
Raising Glass
SUCCESS - Taking a sip.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Buddies and Beer
Checking alcohol level......
Let's take one more......
S-OFF Failed
Errorcode: 66732337
ErrorMsg: Still sober
Quit....
Press ENTER to exit....."""""""""""
i think i do wrong time , what can i do ??
after trying more time it works now my phone is switch-offf.........................
this post is closed...