Hi there. I want to switch from ICS Passion v12 with kernel 3.1.10 ICS Passion Kissed by ICS to ICS Euphoria RC2.1.
What steps are involved in doing this? Can I just flash one on top of the other? What kernels/roms would i need to flash first? Thanks
Reboot in Recovery
Goto MOUNTS & STORAGE >> FORMAT SYSTEM
Wipe Data / Factory Reset
Wipe Cache + Dalvik Cache
Flash the file. You may need to flash file twice if there is bootloop due to CWM version mismatch.
Reboot.
Reboot once again after you see everything settled and you are on your homescreen.
thanks!
Little Problem
Hello i installed rom ICS_Euphoria_RC2.1 with the kernel ICS_Kiss_v5.1_CWM
i wipe data/ factory reset
i wipe cache & Delvik
then installed kernel ICS_Kiss_v5.1_CWM got in to a little boot loop
but was able to get to Recovery.
Then installed Rom: ICS_Euphoria_RC2.1
Everything is working fine, except every time i call someone and use speaker phone i hear everyone fine, but apparently all the hear is really loud static. They say that it sound like i am in the free-way and wind is blowing straight in to the microphone.
If i make a call normal with no speaker it works fine. Any ideas on what to do or how to fix this? Thanks
Related
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
j47d8234554 said:
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
Click to expand...
Click to collapse
KERNEL not suit rom..
jje
How to update from v 1.0
this is my first post, so yeah im a noob, but just want to ask if i was on Resurrection ics v1.0, how could i update? do i just jump to the most recent update, or is there a certain update i have to flash first before moving on? ive tried to flash the v1.4 but then it would'nt boot, then i restored a backup, tried a couple times even from a fresh stock rom, but still it couldnt boot, what do you think the problem is?
sorry for all the questions
i was on resurrection now i dual boot 1.8 with siyah 3.1.2 with D4 rom( which is amazing btw) try 3.1.2 siyah and see if it works - im avoiding RC's and betas for kernel since the brickings, unless you want the features from rc5
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
xXlordyXx said:
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
Thanks mate!!
yugorisfriwan said:
Thanks mate!!
Click to expand...
Click to collapse
hey i am using this remix rom right from the ver 7.4 now on v1.8.1 what i sugesst u first is 2 install v1.7 then u upgrade it 2 the new v1.8.1 by simply flashing it over v1.7 without any wipes that way u wont have any issues in installation
PS: while installing 1.7 u do a full wipe
ie
wipe data/factory reset
wipe cache part
wipe dalvik cache
then install v1.7
then again wipe cache
wipe dalvik cache
Fix permissions
reboot 2 system
boot takes a while?
So how long do i have to wait for the phone to actually boot after updating? So ive flashed the updates, but when i select reboot now, it then comes to the Galaxy s ii i19100 splash screen. Now i have waited for at least 5 minutes, and nothing happened yet, so just restored my backup in fear of something going wrong am i too inpatient or is that just taking to long? how many minutes do i actually have to wait until its a sure flash fail? thx in advance!
5 minutes is too long, are you sure that you have done a full wipe before installing the rom and then wiped the dalvik cache after. The only time when my phone wouldn't boot was when I had forgotten to do the wipes.
anyway just redo the process and make sure you do everything (don't flash any kernels) and just leave the phone for few more minutes than last time. otherwise try to install another version (1.7 for instance) and see if it boots this time
installation problem
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
rzrdelta said:
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
Click to expand...
Click to collapse
hey which rom ur trying 2 install if its v1.7 of remix then first flash the cm9 kernel dwnld'ng the same from OP (original post in page 1 of remix ics thread) section after that reboot 2 cm9 recovery and then flash 1.7 it will be ok
5 minutes are too long mate. before flashing make sure that the current rom you are on has default CM9 kernel (for version 1-1.8)
After that follow the steps:
1.wipe data/factory reset
2.wipe cache partition
3.install main rom
4.go in advance and wipe dalvik cache and then fix permissions
5.wipe cache partition again and reboot
6.after ur first reboot u can then flash kernels,themes,and mods
enjoy
So... if im still on resurrection version 1.0, would installing the stock cm9 kernel work? .... then i could update?
So any workarounds on accessing the external sd on the computer?!!?
xXlordyXx said:
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
This seems to be a bug with the rom. I got the same problem on 1.4 and on 1.8.1. It will only mount the internal mass storage.
To work around this: Mount it with CWM. Works for me.
i'm having this prob on flashing wanamlite and neatrom latest rom. flashing is completed using cwm but when i'm goin to reboot it, it just stucked on bootanimation. i waited 20mins but still nothing happened. what could be the problem? i flashed the latest rootbox and i am able to boot no problem encountered.
Okay first of all - next time, loose the big font. I'm sure everyone who visits this forum can read totally fine.
Next, did you make a full wipe before flashing wanamlite or neatrom? (Wipe data/cache/dalvik cache)
Also after you've flashed any of the ROMs. If it gives you an option to reboot and no other option - do it. If there is an other alternative to go back to CWM - do that. Cause either way you should try to go back to CWM Recovery and from there, wipe cache and dalvik cache (again) and also set permissions. After you've done those things, reboot and it should work.
(i had same proble flashing Omega v23)
i did a clean install by philz and also the wipe data cache and dalvik but i don't go back to cwm to do that again and to fix permission, i just restarted it after installing the rom. thanks, i'll try to do what you said.
Prior to trying to flash a custom rom onto my droid razr, I was on the verizon rom 4.1.2. I had root access and I installed BMM and got recovery working. I really liked CarbonRom from what I read and wanted to flash it and so I got the rom, the gapps 20130301 and I flashed the rom, then the gapps, and I rebooted. It gets stuck on the booting screen (the splash screen). I also tried flashing the jbx hybrid kernel (version 6 i believe) and out of curiousity tried flashing CM10.1 with the same gapps just to see.
None of it works, am I doing something wrong?? If so, what am i doing wrong??
Any help would be appreciated,
Thank you
FIXED
I got it working. If anyone is interested or has my same problem with BMM,
for some reason when you choose factory reset with BMM it doesn't clear /system. You need to go to Mounts & Format and manually format /system before the phone is actually cleared. Just clearing cache and data doens't do it.
myc132 said:
I got it working. If anyone is interested or has my same problem with BMM,
for some reason when you choose factory reset with BMM it doesn't clear /system. You need to go to Mounts & Format and manually format /system before the phone is actually cleared. Just clearing cache and data doens't do it.
Click to expand...
Click to collapse
Worked for me as well!
Hello!
I've been having really really weird problems with my phone and CWM.
Right now I have latest stable CM installed.
Today I decided to switch to ParanoidAndroid.
I got the right ROM, but I installed the wrong google apps the 4.2.2 one.
Now I get a crash when I try to use the keyboard so I decided to flash it again.
I went back into CWM.
Factory reset, deleted cache, wiped dalvik cache.
Installed the same .zip file I did the first time for Paranoid Android except I didn't install Google Apps.
I restart the phone and it doesn't seem to have flashed, it's the one with 4.2.2 GAPPS.
I've tried wiping it 3 times.
I decided to check internal storage on my phone and this is what I see.
I don't think it's supposed to look like this after I just did a factory reset. Right?
http :// puu.sh/5gzsb.png
http :// puu.sh/5gzsR.png
(I can't post links yet)
Right now I just want to hard reset my phone and install PA.
EDIT: I just Factory Reset, Wiped Cache and dalvik restarted my phone and I'm back to the PA ROM with GAPPS 4.2.2
via CWM
go to mounts & storage >> Format system
then
wipe data/factory reset
wipe dalvik cache
flash ROM
Flash Gapps
Flash Desired kernel (if any)
Reboot
everything should be Fine
And for next time I suggest you use philz recovery, it has a clean install options in wipe data/factory reset, it should help you
Howdy partners, not sure if I should have started my own thread...let me know if that is proper procedure please. I've already read the recent boot loop thread by vlmaadir t=2558286, but I'm unsure as to the applicability of the solutions in that thread to my problem.
I'm in a similar situation as the vlmaadir, except I've been running the most recent stock ROM (UCMD8) and have rooted via framaroot and flashed the AJKv4.9 - NoSwap Kernal successfully around 12/5/2013. Of course I've yet to do a backup of the OS or apps, but pics/vids/contacts were all recently backed up.
About two weeks ago I started noticing random reboots, but wasn't really sure what to make of that, never any boot looping though. Well this morning the phone was working when i woke (phone alarm raised me from the dead on time) and had approx. 70% battery, but by the time I got to work, the phone had apparently powered off.
When I powered it back on, it took a several minutes to boot up (normally around 45sec-1min), once booted the battery showed about 10-15% (in the red). The few apps I opened worked (naked browser, outlook), but were a bit laggy. I decided to restart the phone from the regular power menu to see if that would help the laggy/battery issue, and upon restart I am now solidly stuck in my 1st android boot loop!!!
I can boot into CWM recovery, but have yet to do any wiping as I wanted to seek a bit of advice here 1st.
If anyone has any pointers, I'm listening.
Thanks!
I would 1st try a wipe cache and wipe dalvik cache from cwm recovery and see if it will reboot.
If it doesn't then u will probably have to wipe data/factory reset from cwm recovery and then reboot.
If ya have been runnin good for a while with AJ's kernel, then a rogue app may be the cause of ur problem.
R u tweakin anything in the kernel through stweaks apk ?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
4-2ndtwin said:
I would 1st try a wipe cache and wipe dalvik cache from cwm recovery and see if it will reboot.
If it doesn't then u will probably have to wipe data/factory reset from cwm recovery and then reboot.
If ya have been runnin good for a while with AJ's kernel, then a rogue app may be the cause of ur problem.
R u tweakin anything in the kernel through stweaks apk ?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Thanks 4-2.
If I have to go wipe data/factory reset, should i have to re-flash the rom and kernel?
I've been running the AJK for about a month, no tweaks. Like I said in the OP, I had noticed some random reboots in the past few weeks and at some point over Christmas day, when I was doing a good bit of pic/video work on my phone, it came up with a message that the internal storage memory was low. I knew this wasn't the case, at least as far as the entire internal memory, which had around 3 gigs free. Just a few strange things I've noticed since having AJK in place.
Are there any other good kernels for stock 4.1.2? AJK seemed to be the go-to of main stock and custom ROM folks.
I did a cache wipe, but when I enter the dalvik wipe confirm menu, the output shows
E:unknown volume for path [/sd-ext]
and when I confirm yes, wipe dalvik, the screen goes black, then the phone restarts into the boot loop.
Any one know what is up here?
^^
Doing and wipe data/factory reset in the cwm recovery will just return the Stock MD8 to just full stock, as if u first installed it through Odin or att official, Except u will still have the AJ kernel. There is no need to reflash the rom as u say.
But if u cannot find an app that is causing the problem, then a complete Odin flash to Stock MD8 should help in the troubleshooting.
---------- Post added at 07:40 PM ---------- Previous post was at 07:37 PM ----------
wolfboogie said:
I did a cache wipe, but when I enter the dalvik wipe confirm menu, the output shows
E:unknown volume for path [/sd-ext]
and when I confirm yes, wipe dalvik, the screen goes black, then the phone restarts into the boot loop.
Any one know what is up here?
Click to expand...
Click to collapse
The "E:unknown volume for path [/sd-ext]" is the norm from what i remember.
But not sure why choosing to wipe dalvik cache resulted in a bootloop.
Have ya tried the wipe data/factory reset yet ?
Just did a wipe data/factory reset and I got out of the boot loop! Now I just have to set the phone up like I had it once again! Boo!
Thanks for the input 4-2!!!
Glad ya got it going. :good:
If any other problems arise, just let us know. There are several good members around that are glad to help.