Need more help!!! - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

Sorry for this title but i need help because my SK17i can't boot.
I had NerodroidV9 and this morning i can't receive sms and i flashed the official firmware by FlashTool.
But when FT is flashing system.sin it get me an error "ERROR:system.sin flash failed"
I had this problem and i resolved this with Wotanclient but now i can't use this because I haven't credits.
I can't buy credits because I have 17 years old and my father can't get me his money
PS: i can go into fastboot mode and flashmode!

Try to flash again, if fails, redownload the .ftf file.
Probably some bug happened during download.

Nothing!
I flashed all the original firmwares but nothing
Any solutions?

Solved!
Solved with PC Companion and the functions "Repair"
I'm really lucky..
You can close this post and thanks thanks thanks

Related

[Q] My X10 is dead?

Hello! I tried to make the latest update and although everything was going good suddenly appeared a false message! I pressed retry but always the same message! I took out the battery and tried again but nothing happened! I tried updatin through pc companion and seus, same message everywhere! I also tried to repair the software with above programms without mindin if i lose something but again the same! The only thing that my phone does is charging (light is green) and when i press the power on button it makes a vibration but nothing more! I called se and they told me to try in a differnet pc but again nothing happened! I 've taken out sim card and sd card also! Any more ideas to avoid se service?
try to reflash it with a different firmware, you can find em in the dev section along with the tutorials how to do it, this should work since u get ur green light on
I used flashtool, made the connection pressed flash and then i put the sin files! Then it says to power on my phone but i can't! Sorry but im not used to such tecnics! Can you pls help me on how to install the previous firmware i had before the latest update?
tiraklakis said:
I used flashtool, made the connection pressed flash and then i put the sin files! Then it says to power on my phone but i can't! Sorry but im not used to such tecnics! Can you pls help me on how to install the previous firmware i had before the latest update?
Click to expand...
Click to collapse
Read the how to flash tutorials.
Which flash tool?
Try SEUS repair.
What do you mean by "then i put the sin files"?
What was the flase message?
Well i found he solution! Here's what i did!
1) I used x10flasher.bat which i found in this forum wih the latest firmware
2)Then i erased the files from Crogram Files/Sony Ericsson/Update service/db/13740270/blob_fs
3)Run SEUS and everything was ok!
Thanks for your answers!

cant flash any ftf file

i flashed a stock SE 2.1 generic ...and changed the BB to 52 ton install CM7 ...but after i shutted down the phone i wouldnt boot and when i try to flash a Stock SE or try to change the BB it always give me error flashing ...aborted no matter what the file is ...i ve searched in all post but i didnt find any answer ...please some help
Edit: there is a guy here in morocco who fixed the probleme by changing battery and flashing a stock rom ...i will ask him to show me how he did ( if he say ok) ...sinse i used every software and flashtool i found in internet whithout success
Did you try flashing a ROM thru SEUS? It will overwrite whatever you have on there
could u give me a link to download because this X10 is not mine i just try to fix it for a freind and i'm not an expert yet in x10 programmes ...thank u
http://www.sonyericsson.com/cws/sup...s/subject/updateservice/xperiax10?cc=gb&lc=en
Flash with that and you should be all set
thanks man ...downloading
will let u know
just hit the thanks button if it works =)
i will hit it even if it didnt works ...i get cannot identify the device ...any ideas
Did you enter flashmode correctly?
yep i did ...just like they said and just like the description in the flash tool thread .... i will reboot the computer maybe it will be ok after
alright well keep me updated
nothing new ....failed again to identify the device ...i've serached in posts but no answer
idk i try flashtool whenever i mess up my phone, try redownloading the drivers on your computer and flash the SE firmware with the latest flashtool
i did try ... i unistall the updater and instal it again ...it reconize the phone but programme is frozen is it normal to freeze?
well flashtool should take around 10 mins and less
yes but at least u can see the progress bar and u know what to wait ... well i guess i still have some research to do ...any way thank for the help and u got any idea just let me know
do you have pc companion?
i just install it and when i plug the phone it reconize it ... but when i try to repair it it just give me an error it said cant download
Mootmetal, I've got the exact same problem. I've tried everything. I've been trying to fix my phone for over 6 months and nothing has worked.
Please someone help!
See my thread here:
http://forum.xda-developers.com/showthread.php?p=15451846#post15451846
test with this driver
barrac28 said:
test with this driver
Click to expand...
Click to collapse
what i'm supposed to do with this driver ? do i need to replace a folder with this?

SEUS cannot repair phone

didnt see anything on this so i started a new topic...
but my x10 is haveing issues so i tried to repair via SE PC Companion, but the repair function doesnt seem to work, as i get... "An error has occurred and the phone software update was aborted"
and with the SEUS Update i get ... "The installation failed"
ive also tried flashtool, but the flashing of FW 435 fails @ amss_fs.sin stage..
Did i actually end up bricking the phone and have to send it for warranty?
unless i am missing something... any help would be appreciated
Flash with flashtool 0.2.8 and one stock rom, for example most recent, 2.0.1.b.1, my x10 brick yesterday too, I flash by this way.. regards..
sent by miui x10i with lockscreen sense 3.0!!
flowserver said:
Flash with flashtool 0.2.8 and one stock rom, for example most recent, 2.0.1.b.1, my x10 brick yesterday too, I flash by this way.. regards..
sent by miui x10i with lockscreen sense 3.0!!
Click to expand...
Click to collapse
i used flashtool 0.2.91 , and the most recent FW too, the b.1 and still have the same issue @ the amss_fs.sin step
I had this problem once and I fixed it by flashing only the baseband back to the the phone
Stephen3672 said:
I had this problem once and I fixed it by flashing only the baseband back to the the phone
Click to expand...
Click to collapse
hmm tried that too, but the amss_fs.sin file is still required on the baseband flash... aigoo~
Did u try flashing baseband on flashtool 0.2.8 . Were u
using a custom Rom before I had the same problem when I use jrepal 7.0.1 Rom when try seus my phone
would get the error and was stocked at se logo
Stephen3672 said:
Did u try flashing baseband on flashtool 0.2.8 . Were u
using a custom Rom before I had the same problem when I use jrepal 7.0.1 Rom when try seus my phone
would get the error and was stocked at se logo
Click to expand...
Click to collapse
yeah i tried flashtool 0.2.8 and still have same issue with the amss_fs.sin file..
try to flash the kernel.sin only from flashtool 0.2.91
Since today (I just realised it today so maybe since couple of days ago) the repair button doesn't even appair for me in the SEUS.
No repair in my seus. it just say I have newest software.
are SE black listning phones whit custom ROM ?
I have a similar problem, phone just wont turn on. SEUS doesnt give me a repair option. Then flashtool always gives me error and then aborts. And when i leave the battery out for at least 24 hours, then plug charger into phone w/o battery, then put battery in 10mins later, it starts up. goes straight to Xrecovery. Reboot and it turns on. but eventually it just turns off again to the point i cant turn it on again. so frustrating. I really think the phone is done for...

WotanServer flashing error

Hello
I probably bricked my phone when i was updating my software by SE PC Companion.
It was updating and it suddenly stopped so i plugged out my phone. Now it won't boot, i only feel a vibration and that's all
I tried to unbrick with wotan server but after downloading rom, error appears: error file header write failed.
Here's the log:
Downloading necessary files...
RXC52c3b8c39614c4206fafc819d7c1e360
downloading...
File ready and CRC is OK
RXB0a2324be085e01965722d02c89603764
found cached, checking integrity...
File ready and CRC is OK
RXDf1462e3cc8cf2727ec328892766d1aac
downloading...
File ready and CRC is OK
download completed.
Booting phone...
Click to expand...
Click to collapse
Can you help me with this?
Thanks.
Search for fota UNbrick
Sent from my MT11i using Tapatalk
Search for fota UNbrick
Click to expand...
Click to collapse
I tried to do this but it didn't work. Damn i'm so screwed.
Have you got any other solutions?
And I have a question, if i tried to flash with this FlashTool, did I void the guaranty?
I think I will send it to the service...
Try a full flash with flashtool, first before trying to send back.
Sent from my MT11i using Tapatalk
I didnt have any problem with wotan client, flashed my neo after i bricked it.
i can maybe help later when i come back...
Ok it will be really cool
But it's my friend's phone, if you have any ideas I will try it until tomorrow, because my friend is quite newbie in that things. I can try to flash with Wotan one more time.
download wotan client 3.5.0 from wotanserver.com, if you havent already done that?? you have to register to download this...
install wotan client and open it, you connect your phone via usb and press the back button at the same time and let wotan client find it...
then just follow instructions and your phone will be as new... hopefully
I've done everything exactly as you wrote but I had this annoying error :/ I will try it one more time tomorrow or tell my friend to do this and I will let you know if it worked.
ok. i had a minor stroke when it happened to my phone and i almost took it to the repair shop...
then this guy helped me http://www.youtube.com/watch?v=pbrCKEkg4OE
because my phone bricked when installing kernel after this video, i had .62 firmware but the video was for .42, i did send him a message and he pointed out wotan server....
did you flash it to .62 firmware??? good luck
My friend just tried to flash with Wotan one more time and phone started and showed a triangle with "!" Now he's trying to flash .42 firmware again.
EDIT: YEAH phone is alive ! Thank you very much for your advance, we are very grateful !
No problem You wont become an expert unless you **** something up

[Q] Bootloop on startup after update, root and unlock BL

Hello,
i have a problem.
I have buy yesterday, so i decide immediatly, made update (last version 6.2.1.100), after i use the root tool by doomlord (v15), no problem, and after this step, i try to unlock my BL, no problem with fastboot, after finish, fastboot, say me "okay no problem", but since this reboot, my phone can't pass the first step (animation with the smoke with differents colors).
For poweroff my phone i need make a "hard reset", push on the stop button and vol + (3 vibrates).
I've try to connect my phone in fastboot mode or flashtool mode, but i don't know what i must do after ?
Please find me a solution
Thank you in advance
David
ps : excuse for my poor english
dav999 said:
Hello,
i have a problem.
I have buy yesterday, so i decide immediatly, made update (last version 6.2.1.100), after i use the root tool by doomlord (v15), no problem, and after this step, i try to unlock my BL, no problem with fastboot, after finish, fastboot, say me "okay no problem", but since this reboot, my phone can't pass the first step (animation with the smoke with differents colors).
For poweroff my phone i need make a "hard reset", push on the stop button and vol + (3 vibrates).
I've try to connect my phone in fastboot mode or flashtool mode, but i don't know what i must do after ?
Please find me a solution
Thank you in advance
David
ps : excuse for my poor english
Click to expand...
Click to collapse
What phone is it?
You can try to repair with PC Companion or SUS
ChikeD said:
What phone is it?
You can try to repair with PC Companion or SUS
Click to expand...
Click to collapse
Oh excuse me, it's for Xperia GO, i think i have find the solution, when i go in flashtool mode, my phone after peraps 30sec for waiting, reboot automticaly, so i have thinking "it's impossible for flash it", but i have juste find the tip, just shutdown the phone and retry speedly, after this, flashtool can work.
So for the moment i've just reinstalled the last stock rom, and root, next step try to install the phantom kernel, i think it's good since now.
ps : with PC compagnon, (before reinstalling stock rom with flashtool), the software cannot find the phone (he said me "phone isn't connected")
Thank you for your response.
David
dav999 said:
Oh excuse me, it's for Xperia GO, i think i have find the solution, when i go in flashtool mode, my phone after peraps 30sec for waiting, reboot automticaly, so i have thinking "it's impossible for flash it", but i have juste find the tip, just shutdown the phone and retry speedly, after this, flashtool can work.
So for the moment i've just reinstalled the last stock rom, and root, next step try to install the phantom kernel, i think it's good since now.
ps : with PC compagnon, (before reinstalling stock rom with flashtool), the software cannot find the phone (he said me "phone isn't connected")
Thank you for your response.
David
Click to expand...
Click to collapse
Ah unlocked BL I forgot you cannot update with SUS and PCC will not flash, but it will load the files which you can built the FTF file from with flashtool.
If you have used PCC with the phone before it does not need to recognize it, you can just start repair.
Finnaly it's good, i've a working phone
I can say "ouf" (in french)
Thanks for all
Bye
David

Categories

Resources