Is there a MultiCSC package with XEN in it? I want to change my CSC to XEN (Netherlands). I got it and i had KOR as CSC, which is strange as i bought it at a proper retailer in the Netherlands... Using MultiCSC is already changed the CSC to XEU so to be more compatible with EU etc. But i really want the CSC/Productcode to be XEN for the netherlands.
When using CSC Select or *#272*IMEI# you can only select an CSC if you have a multiCSC on your system. When i have a multiCSC installed i can choose a lot codes, but XEN is never in there. But when i have a XEN ROM and CSC installed i can't choose the XEN.
So the question is, is there a MultiCSC package that also contains XEN. This way i can use Select CSC to change my phone to XEN.
Try to flash this with odin, I made it for u, all it contains is the XEN CSC and not any other firmware files.
After flashing check your csc and try to change to XEN, if that still doesn't work then wipe data/cache and try again.
You can also PM me in dutch if you need me
http://hotfile.com/dl/154276633/8880e6a/HAVOCNL_XENLP3_CSC.tar.md5.html
jeantje said:
Try to flash this with odin, I made it for u, all it contains is the XEN CSC and not any other firmware files.
After flashing check your csc and try to change to XEN, if that still doesn't work then wipe data/cache and try again.
You can also PM me in dutch if you need me
http://hotfile.com/dl/154276633/8880e6a/HAVOCNL_XENLP3_CSC.tar.md5.html
Click to expand...
Click to collapse
Thanks this will be of good use to me as I have Dutch handset...
I have the same problem.
My phone is a pth(portugal)version.
There is no ics via kies so i downloaded de xen versie.
Now i can't set de csc code there is no selection in it.
samsung kies can't update the phone anymore.
Need also the multi csc version with xen
theMurdock said:
I have the same problem.
My phone is a pth(portugal)version.
There is no ics via kies so i downloaded de xen versie.
Now i can't set de csc code there is no selection in it.
samsung kies can't update the phone anymore.
Need also the multi csc version with xen
Click to expand...
Click to collapse
Why do you want DE German CSC ???
CSC is not required to use phone enter network settings manually .
jje
jeantje said:
Try to flash this with odin, I made it for u, all it contains is the XEN CSC and not any other firmware files.
After flashing check your csc and try to change to XEN, if that still doesn't work then wipe data/cache and try again.
You can also PM me in dutch if you need me
http://hotfile.com/dl/154276633/8880e6a/HAVOCNL_XENLP3_CSC.tar.md5.html
Click to expand...
Click to collapse
Still won't work. I don't get any options to choose from with the XEN CSC installed. So still stuck in XEU.
Thank You jeantje !
Your file works! But you have to do a factory reset to recognize new CSC.
Afterwards i installed the last dutch i9100xwlpd.
:good:
jackrip5 said:
Thank You jeantje !
Your file works! But you have to do a factory reset to recognize new CSC.
Afterwards i installed the last dutch i9100xwlpd.
:good:
Click to expand...
Click to collapse
That is good to hear!
Have fun!
I had ran into a coupe of csc issues lately I found this way to be the best option to switch to desired CSC.
1 - select XEO as CSC (this is just a temporary step cause most multi csc has this region/setting)
2 flash the latest(that match your rom) multi csc that has the region you want
3- select your desired CSC
this method helps you avoid the CSC unknown error due to having flashed a CSC on top of one that doesnt have the previously selected CSC
Related
Hi all,
I recently upgraded my SGS2 to ICS but I did not like it for several reasons (no easy folder selection as in 2.3.6 email client, no consistent fonts when using your own flipfont etc etc). So I wiped all and reflashed the XEN stock 2.3.6 rom.
After reinstalling and recustomizibg, I noticed that the phone doesn't report a csc so I want to reflash the I9100XENKJ1 csc. There is a download link in chainfire's topic, but that file is no longer available on the location mentioned.
Anyone has this file available? I didn't want to reflash the whole rom.
Thanks!
Sent from my GT-I9100 using XDA
if you flashed the stock ICS using odin just wipe using the wipe code it will fix the csc.
if it doesnt you have to either flash a csc or flash the whole ROM again.
no easy method.
specific csc is hard to find after multiupload closing.
you can also try samsung csc from market if csc is there but not working.
Thanks for your quick response. I upgraded to ICS using Kies, but I reflashed 2.3.6 with Odin.
What specific code do you mean? The full system wipe?
I also thought you could create a csc file yourself from the files that are in the full rom tar? Anyone ideas? The phone is working and when I reflash the whole 2.3.6 rom I would have to redo all customizations...
Thanks!
Sent from my GT-I9100 using XDA
*2767*3855#
it will wipe your phone and fix csc. incase it doesnt you have to either flash csc or ROM .
no matter what you do it will wipe phone to fix csc. if your phone works, no need for csc.
That is clear. The only reason why I want to fix the CSC problem, is that now Kies doesn't recognise the current firmware in case I do want to update later.
I'll start backing up again, and reflash the whole ROM. Thanks for thinking with me!
gschot said:
Thanks for your quick response. I upgraded to ICS using Kies, but I reflashed 2.3.6 with Odin.
What specific code do you mean? The full system wipe?
I also thought you could create a csc file yourself from the files that are in the full rom tar? Anyone ideas? The phone is working and when I reflash the whole 2.3.6 rom I would have to redo all customizations...
Not create but you can extract the CSC data from a phone
Namely folder CSC
Files CSC.text CSC Version text .
Replace
Or extract from rom csc is in cache.image .
jje
Click to expand...
Click to collapse
Thanks all for your input! My phone now knows again what its CSC is.
Hi guys.
I'm an Italian user. Yesterday I flashed my Samguns Galaxy S3 I9300 branded Vodafone Italy, with this ROM I9300XXALF6_I9300ITVALF1_ITV.zip
Here steps i've followed:
1) Reset factory defaults
2) Flash with odin
3) Reset factory defaults again
Now I've two problems:
1) *#1234* shows me CSC Unknown and so I can't connect my phone with Kies
2) Messages Apps crashes every time
I've tried also other official ROMs like OMN (Italian branded ROM) and results are the same.
Could You help me please?
You do know that you are asking a question in the wrong thread? All questions need to be asked in the Q & A section.
You need to flash the stock rom for your phone when you recieved it and type the following in your dialer. *#272* followed by your IMEI number and then #. This should bring a menu with all the common csc, select the apprioate one and install. Do note that your data on the phone will be wiped and you will return to factory settings.
If it helps, hit the thanks button
pierinhood said:
Hi guys.
I'm an Italian user. Yesterday I flashed my Samguns Galaxy S3 I9300 branded Vodafone Italy, with this ROM I9300XXALF6_I9300ITVALF1_ITV.zip
Here steps i've followed:
1) Reset factory defaults
2) Flash with odin
3) Reset factory defaults again
Now I've two problems:
1) *#1234* shows me CSC Unknown and so I can't connect my phone with Kies
2) Messages Apps crashes every time
I've tried also other official ROMs like OMN (Italian branded ROM) and results are the same.
Could You help me please?
Click to expand...
Click to collapse
Flash your CSC from this thread.
moved to q&a
I've flashed my CSC and nothing changed.
If I enter *#272*IMEI# I can see ITV but if I enter *#1234# result is always "CSC Unknown".
wanam said:
Flash your CSC from this thread.
Click to expand...
Click to collapse
I had the same problem with LF2 BTU it kept switching to KOR i had to change CSC manually editing 2 files
Sent from my GT-I9300 using Tapatalk 2
Even though the tip in post2 works to show a list of CSC, I have flashed PHN CSC, but it is not listed. Just DBT, probably because that is what the phone got shipped with.
I bought a German phone, but I need a PHN CSC.
I solved my problem by flashing firmware with Odin Mobile
Someone had a solution and worked for me -> http://forum.xda-developers.com/showpost.php?p=35146774&postcount=6595
MichelN said:
Someone had a solution and worked for me -> http://forum.xda-developers.com/showpost.php?p=35146774&postcount=6595
Click to expand...
Click to collapse
wow, finally something worked for me. thank you for sharing
Hi all
I have this weird problem...
I have recived this phone from a friend, it came with damaged EFS/NV_DATA folder, (Damaged with the unlock tool, IMEI 0049....)
I rooted the phone + rebuild the IMEI with USB + Unlock + UART cable + SPT box, and everything worked like a charm...
After this I want to return it back to stock, as my friend does not need root, and has no intentions of flashing a custom rom to the handset...
So I just flashed a stock NEE to it, checked the CSC with *#272*IMEI# it is set to NEE... But when I use kies it is recognised as XXX... So flashed a few stock NEE roms to it (Also from my box support area), every time I check the CSC on the phone, it tells me that it is NEE... But when I try with Kies, it is still recognised as a XXX
I then tried to flash a XAB to it, changed the CSC to XAB, after I flashed the NEE rom back to it, checked again, and it is set to NEE, but kies still tells me CSC is XXX...
This is really annoying, can anyone post a multi CSC rom, where I can hit NEE and install with getting the annoying "must be three characters"
Best regards
First question has to be is it the original IMEI .
jje
JJEgan said:
First question has to be is it the original IMEI .
jje
Click to expand...
Click to collapse
Ofcause, I only do IMEI rebuild, I do not do IMEI change at all
CSC posted here .
http://forum.xda-developers.com/showthread.php?t=1671969
You can always push CSC files to system if rooted as a work around .
BUT
My guess is that Kies is reading the HIDSWVER keys in the registry as XXX
as per this post from SGS2
http://forum.xda-developers.com/showpost.php?p=14010996&postcount=1
delete those keys and restart or reinstall Kies.
jje
JJEgan said:
CSC posted here .
http://forum.xda-developers.com/showthread.php?t=1671969
You can always push CSC files to system if rooted as a work around .
BUT
My guess is that Kies is reading the HIDSWVER keys in the registry as XXX
as per this post from SGS2
http://forum.xda-developers.com/showpost.php?p=14010996&postcount=1
delete those keys and restart or reinstall Kies.
jje
Click to expand...
Click to collapse
I have tried to delete the intire post in regedit, and also used another PC, still the same issue... This is just weird
I also get this
#MANUAL MODE#
-- Appling Multi-CSC...
Applied the CSC-code: NEE
Successfully applied multi_CSC
So it should be recognised correctly as a NEE phone
Has this been solved?
pedrohp said:
Has this been solved?
Click to expand...
Click to collapse
Well yeah, I just bricked it, and of to warranty
Sendt fra min GT-I9300 med Tapatalk2
I all,
I am having problems with the CSC on my wife's SGS3. She was sent a German version S3 (twice) as a replacement for a damaged phone from her insurance company.
This has a CSC code of DBT
As the CSC list (using *#272*imei#) only contained DBT, I flashed the phone using odin with official LLA-JellyBean (CSC-Code BTU) so I could put it as a UK handset.
Now when I plug it into kies i get this:
YOUR DEVICE'S CURRENT FIRMWARE VERSION IS NOT SUPPORTED TO UPDATE FIRMWARE VIA KIES
CURRENT FIRMWARE VERSION: PDA:LLA / PHONE:LLA / CSC:LLA (DBT)
(Cant remember off hand what it was but it wasn't LLA prior to the flash)
I have tried all i can think of to correct this.
When i run the *#272 thing it comes up:
USSD CODE RUNNING
then:
UNKNOWN APPLICATION
I have tried the Samsung Galaxy S / S2 /S3 CSC app from play store, again I get message when I run it:
UNKNOWN APPLICATION
I have gone into recovery mode and get the following (in yellow beside the droid icon):
#MANUAL MODE#
--APPLYING MULTI CSC
APPLIED THE CSC-CODE: DBT
SUCCESSFULLY APPLIED MULTI-CSC
I have also tried WIPING DATA CACHE and FACTORY RESET from recovery mode
None of this has made any difference, (all done in the order as I have listed it above) please could somebody point me in the right direction before I pull out what remaining hair I have left.
Download the latest stock full rom for UK and Europe XXEMB5 from one of the below and flash via odin. then carry out a factory reset.
XDA Thread
Sammobile
ag4751 said:
Download the latest stock full rom for UK and Europe XXEMB5 from one of the below and flash via odin. then carry out a factory reset.
XDA Thread
Sammobile
Click to expand...
Click to collapse
I have tried this but the flash failed. I have also tried to re-flash the LLA version I had put on previously
Odin says the COM Port cannot be opened
Cougar-UK said:
I have tried this but the flash failed. I have also tried to re-flash the LLA version I had put on previously
Odin says the COM Port cannot be opened
Click to expand...
Click to collapse
Re-install Kies and USB drivers first.
djembey said:
Re-install Kies and USB drivers first.
Click to expand...
Click to collapse
Thank you djembey. Rather than uninstall kies and risk losing backups (couldnt be bothered to find files and move them) including for my own S3, I ran the flash from my wife's laptop. I plugged phone in first so drivers installed then phone flashed successfully.
However the CSC has remained DBT even though I flashed the BTU version
Cougar-UK said:
Thank you djembey. Rather than uninstall kies and risk losing backups (couldnt be bothered to find files and move them) including for my own S3, I ran the flash from my wife's laptop. I plugged phone in first so drivers installed then phone flashed successfully.
However the CSC has remained DBT even though I flashed the BTU version
Click to expand...
Click to collapse
I think there is somewhere a thread with flashable csc packages or you could try the csc changer app (will format your phone though).
This might help: http://forum.xda-developers.com/showthread.php?t=2080181
Sent from my GT-I9300 using xda app-developers app
chrismast said:
I think there is somewhere a thread with flashable csc packages or you could try the csc changer app (will format your phone though).
This might help: http://forum.xda-developers.com/showthread.php?t=2080181
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thank you. I have had a look through the threads you referred to but it looks a bit confusing (though could just be how its written). Think I'll leave phone as is.
Hi
I would truly and highly appreciate any help
I could not change my current carrier rom (PCL in Israel) to mine (PTR in Israel) or even to another country United Kingdom (BTU).
The thing is, every time after I update the rom there is is this "update" screen that I think belongs to the current (PCL) rom that changes everything back, so nothing gets changed.
1. Maybe it is not possible at all?
2. If it is, is there any guide?
Here are the steps I do:
1. Disabled OEM Unlock
2. Odin: Flashed the BL and AP and CP and CSC (not Home CSC).
3. Odin: Made sure Auto Reboot & F.Reset time are checked
4. Odin: for BTU only - checked re partition
5. After reboot the "update" screen went on, it wrote updating, and then deleting - I think that might be the problem.
Thanks
Please delete my post, I've just noticed I can't ask here, sorry.
mbenji86 said:
Hi
1. Maybe it is not possible at all?
2. If it is, is there any guide?
Thanks
Click to expand...
Click to collapse
Did you leave the old SIM in the phone by any chance? it automatically switches to the SIM card CSC (many csc are built in).
nimms said:
Did you leave the old SIM in the phone by any chance? it automatically switches to the SIM card CSC (many csc are built in).
Click to expand...
Click to collapse
Sadly no, the SIM card belongs to my new network (PTR, Partner Israel).
But in Software info there is still PCL/PCL/PCL (does it mean it thinks that my new SIM is PCL instead of what it really is - PTR?)
mbenji86 said:
Sadly no, the SIM card belongs to my new network (PTR, Partner Israel).
But in Software info there is still PCL/PCL/PCL (does it mean it thinks that my new SIM is PCL instead of what it really is - PTR?)
Click to expand...
Click to collapse
PCL is single in OXM multi CSC (same as BTU) and that is why your SIM doesn't change the CSC, if you flash odin a Carrier Firmware and then the OXM again it will change after you insert your SIM.
NOTE: You have to use the CSC and not the HOME_CSC. This will erase everything.
holifo said:
PCL is single in OXM multi CSC (same as BTU) and that is why your SIM doesn't change the CSC, if you flash odin a Carrier Firmware and then the OXM again it will change after you insert your SIM.
NOTE: You have to use the CSC and not the HOME_CSC. This will erase everything.
Click to expand...
Click to collapse
Thank you very much @nimms and @holifo
Could you please let me know an example for "Carrier Firmware" to flash? May I assume that OXM again can be PTR?
mbenji86 said:
Thank you very much @nimms and @holifo
Could you please let me know which firmware is "Carrier Firmware"? May I assume that OXM again can be PTR?
Click to expand...
Click to collapse
You could use any N950F firmware except OXM and then go back to OXM.
Let the phone boot with your SIM in when it will ask you to erase for settings say yes and that's it.
Use the CSC_ and not the HOME_CSC_, This will erase your phone make sure you have a backup.
Hope that helps.:good:
holifo said:
You could use any N950F firmware except OXM and then go back to OXM.
Let the phone boot with your SIM in when it will ask you to erase for settings say yes and that's it.
Use the CSC_ and not the HOME_CSC_, This will erase your phone make sure you have a backup.
Hope that helps.:good:
Click to expand...
Click to collapse
Thanks @Holfio
I always used the CSC file.
I am sorry but I can't find which firmware is OXM and which is not, (Are PCL, PTR and BTU all OXM firmwares?) I would love it if you could point to a specific non OXM firmware.
Thanks so much!
mbenji86 said:
Thanks @Holfio
I always used the CSC file.
I am sorry but I can't find which firmware is OXM and which is not, (Are PCL, PTR and BTU all OXM firmwares?) I would love it if you could point to a specific non OXM firmware.
Thanks so much!
Click to expand...
Click to collapse
Use Vodafone with CSC code VOD which is Vodafone UK.
holifo said:
Use Vodafone with CSC code VOD which is Vodafone UK.
Click to expand...
Click to collapse
Thanks!!
mbenji86 said:
Thanks!!
Click to expand...
Click to collapse
When you flash VOD let it boot fully do not set up accounts and check what CSC is the Software Version in settings.
And then re-flash OXM.
hey, if the 4 files truly wipe everything, what is the point of flashing non-OXM firmware, and then start from zero with OXM firmware?
when we setup accounts with or without sim>?
after we set up accounts, and reflash OXM how do I reboot with or without sim?
c.senor said:
hey, if the 4 files truly wipe everything, what is the point of flashing non-OXM firmware, and then start from zero with OXM firmware? when we setup accounts with or without sim>?
after we set up accounts, and reflash OXM how do I reboot with or without sim?
Click to expand...
Click to collapse
When u flash a non-OXM it will reset the CSC from single CSC to multi CSC which this will allow you to change CSC in the multi OXM CSC based in the SIM card inserted. You have to let it boot in the non-OXM for the CSC to be activated.
in my last post I said do not setup account in the NON-OXM and yes sim need to be in.
I did this, managed to get a carrier Orange firmware FTM/FTM/BTU.
But when I flash the OXM file it defaults to BTU/BTU/BTU.
when I enter recovery it says
#Manual MODE v1.0.0#
-- Appling Multi-CSC...
Applied the CSC-code : BTU
Successfully applied multi-CSC.
and other stuff
I do not have UK sim card in , it is RO sim.
Can this be because I have single sim version?
c.senor said:
I did this, managed to get a carrier Orange firmware FTM/FTM/BTU.
But when I flash the OXM file it defaults to BTU/BTU/BTU.
when I enter recovery it says
#Manual MODE v1.0.0#
-- Appling Multi-CSC...
Applied the CSC-code : BTU
Successfully applied multi-CSC.
and other stuff
I do not have UK sim card in , it is RO sim.
Click to expand...
Click to collapse
What CSC you want your phone to go to.
I need ROM
c.senor said:
I need ROM
Click to expand...
Click to collapse
When u flash the FTM did you use CSC or HOME_CSC?
Did you let the phone boot in FTM?
I used CSC, and it booted ok in FTM
I guess FTM is the default csc in this "mini oxm firmware" that contains FTM, AMO and some other
you do not need to quote me if the post is above :_)
You now need a SIM to change the CSC from BTU(single) to whatever is your SIM.
I would recommend you to flash:
Product code CNX
PDA N950FXXU2BQKG
CSC N950FOVF2BQKG
and get a SIM from Vodafone Romania so it can change from VD2 to CNX.
After this flash OXM and your OXM it should change to either XEF/XEF/BTU or XEU/XEU/BTU, then insert your SIM to change to ROM.
I hope this help
Finally, it worked, guess all I needed was another operator SIM. Thanks a lot for your help!