Hi guys.
I'm an Italian user. Yesterday I flashed my Samguns Galaxy S3 I9300 branded Vodafone Italy, with this ROM I9300XXALF6_I9300ITVALF1_ITV.zip
Here steps i've followed:
1) Reset factory defaults
2) Flash with odin
3) Reset factory defaults again
Now I've two problems:
1) *#1234* shows me CSC Unknown and so I can't connect my phone with Kies
2) Messages Apps crashes every time
I've tried also other official ROMs like OMN (Italian branded ROM) and results are the same.
Could You help me please?
You do know that you are asking a question in the wrong thread? All questions need to be asked in the Q & A section.
You need to flash the stock rom for your phone when you recieved it and type the following in your dialer. *#272* followed by your IMEI number and then #. This should bring a menu with all the common csc, select the apprioate one and install. Do note that your data on the phone will be wiped and you will return to factory settings.
If it helps, hit the thanks button
pierinhood said:
Hi guys.
I'm an Italian user. Yesterday I flashed my Samguns Galaxy S3 I9300 branded Vodafone Italy, with this ROM I9300XXALF6_I9300ITVALF1_ITV.zip
Here steps i've followed:
1) Reset factory defaults
2) Flash with odin
3) Reset factory defaults again
Now I've two problems:
1) *#1234* shows me CSC Unknown and so I can't connect my phone with Kies
2) Messages Apps crashes every time
I've tried also other official ROMs like OMN (Italian branded ROM) and results are the same.
Could You help me please?
Click to expand...
Click to collapse
Flash your CSC from this thread.
moved to q&a
I've flashed my CSC and nothing changed.
If I enter *#272*IMEI# I can see ITV but if I enter *#1234# result is always "CSC Unknown".
wanam said:
Flash your CSC from this thread.
Click to expand...
Click to collapse
I had the same problem with LF2 BTU it kept switching to KOR i had to change CSC manually editing 2 files
Sent from my GT-I9300 using Tapatalk 2
Even though the tip in post2 works to show a list of CSC, I have flashed PHN CSC, but it is not listed. Just DBT, probably because that is what the phone got shipped with.
I bought a German phone, but I need a PHN CSC.
I solved my problem by flashing firmware with Odin Mobile
Someone had a solution and worked for me -> http://forum.xda-developers.com/showpost.php?p=35146774&postcount=6595
MichelN said:
Someone had a solution and worked for me -> http://forum.xda-developers.com/showpost.php?p=35146774&postcount=6595
Click to expand...
Click to collapse
wow, finally something worked for me. thank you for sharing
Related
Hi all,
Need to return my s3 to stock, I've removed custom binary and flash count and flashed back to LE8 stock software, but messages app don't work and won't update through kies, I understand this may have something to do with the csc so I flashed a different one - got messages app working but still won't update so something must be wrong. It's on csc btu
Please help as I need to use the warranty, it's a uk phone purchased from carphonewarehouse unlocked and simfree
Check the phone bootloader update option in odin when you flash your stock firmware.
jus71n said:
Hi all,
Need to return my s3 to stock, I've removed custom binary and flash count and flashed back to LE8 stock software, but messages app don't work and won't update through kies, I understand this may have something to do with the csc so I flashed a different one - got messages app working but still won't update so something must be wrong. It's on csc btu
Please help as I need to use the warranty, it's a uk phone purchased from carphonewarehouse unlocked and simfree
Click to expand...
Click to collapse
Try repeating these steps in order..
1. Use Triangle away and reset your counter
2. Download the latest BTU firmware which I think is LG8
3. Flash via Odin
4. Dial *#1234# and check whether all the 3 AP, CP and CSC are the same
5. otherwise change it to BTU
6. Then connect to kies and check whether it detects your phone correctly
watch this video
http://www.google.co.in/url?sa=t&rc...mPaH6UUTVQca6Vtdg&sig2=WiLMnmXEzz7SzsqpJXvSSw
nircalon said:
Check the phone bootloader update option in odin when you flash your stock firmware.
Click to expand...
Click to collapse
Can't its greyed out
jus71n said:
Can't its greyed out
Click to expand...
Click to collapse
Follow Zoot1 post do not mess with boot loaders for no reason .
jje
I all,
I am having problems with the CSC on my wife's SGS3. She was sent a German version S3 (twice) as a replacement for a damaged phone from her insurance company.
This has a CSC code of DBT
As the CSC list (using *#272*imei#) only contained DBT, I flashed the phone using odin with official LLA-JellyBean (CSC-Code BTU) so I could put it as a UK handset.
Now when I plug it into kies i get this:
YOUR DEVICE'S CURRENT FIRMWARE VERSION IS NOT SUPPORTED TO UPDATE FIRMWARE VIA KIES
CURRENT FIRMWARE VERSION: PDA:LLA / PHONE:LLA / CSC:LLA (DBT)
(Cant remember off hand what it was but it wasn't LLA prior to the flash)
I have tried all i can think of to correct this.
When i run the *#272 thing it comes up:
USSD CODE RUNNING
then:
UNKNOWN APPLICATION
I have tried the Samsung Galaxy S / S2 /S3 CSC app from play store, again I get message when I run it:
UNKNOWN APPLICATION
I have gone into recovery mode and get the following (in yellow beside the droid icon):
#MANUAL MODE#
--APPLYING MULTI CSC
APPLIED THE CSC-CODE: DBT
SUCCESSFULLY APPLIED MULTI-CSC
I have also tried WIPING DATA CACHE and FACTORY RESET from recovery mode
None of this has made any difference, (all done in the order as I have listed it above) please could somebody point me in the right direction before I pull out what remaining hair I have left.
Download the latest stock full rom for UK and Europe XXEMB5 from one of the below and flash via odin. then carry out a factory reset.
XDA Thread
Sammobile
ag4751 said:
Download the latest stock full rom for UK and Europe XXEMB5 from one of the below and flash via odin. then carry out a factory reset.
XDA Thread
Sammobile
Click to expand...
Click to collapse
I have tried this but the flash failed. I have also tried to re-flash the LLA version I had put on previously
Odin says the COM Port cannot be opened
Cougar-UK said:
I have tried this but the flash failed. I have also tried to re-flash the LLA version I had put on previously
Odin says the COM Port cannot be opened
Click to expand...
Click to collapse
Re-install Kies and USB drivers first.
djembey said:
Re-install Kies and USB drivers first.
Click to expand...
Click to collapse
Thank you djembey. Rather than uninstall kies and risk losing backups (couldnt be bothered to find files and move them) including for my own S3, I ran the flash from my wife's laptop. I plugged phone in first so drivers installed then phone flashed successfully.
However the CSC has remained DBT even though I flashed the BTU version
Cougar-UK said:
Thank you djembey. Rather than uninstall kies and risk losing backups (couldnt be bothered to find files and move them) including for my own S3, I ran the flash from my wife's laptop. I plugged phone in first so drivers installed then phone flashed successfully.
However the CSC has remained DBT even though I flashed the BTU version
Click to expand...
Click to collapse
I think there is somewhere a thread with flashable csc packages or you could try the csc changer app (will format your phone though).
This might help: http://forum.xda-developers.com/showthread.php?t=2080181
Sent from my GT-I9300 using xda app-developers app
chrismast said:
I think there is somewhere a thread with flashable csc packages or you could try the csc changer app (will format your phone though).
This might help: http://forum.xda-developers.com/showthread.php?t=2080181
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thank you. I have had a look through the threads you referred to but it looks a bit confusing (though could just be how its written). Think I'll leave phone as is.
Problem now resolved - just needed a factory reset to get it going (can't believe I forgot something so fundamental!)
I posted earlier looking for how to flash a new stock rom to my Galaxy S3 I9300 - managed to find an Odin flash guide at
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
I already had the right version of Odin and downloaded the following firmware which seemed to be the only one listed for my device
Firmware Info - I am not able to access the phone to check for any details but it was international unlocked bought from amazon uk so this seemed to be the only non- carrier version
PDA: XXALE8
Phone: XXLE8
Date: 13/05/2012
Android Version: 4.0.4
BTU (UK) Also contains (CPW DBT ITV KOR XEF XEO): Download
Flash with ODIN reported successful and the phone booted - however after the animated logo and sound it sticks at the static "SAMSUNG" logo and goes no further. This is the same problem I was having after doing a factory reset
Does anyone please have any suggestions as to what I should try next - I followed another thread which suggested wiping the cache which I did but still sticking on the SAMSUNG logo. Would installing a custom ROM be likely to work or is there something else I need to try
Wrong forum, this is only for the i9300.
Report your own post and ask a moderator to move it.
Sent from my GT-I9300 using Tapatalk
it is GT-I9300
boomboomer said:
Wrong forum, this is only for the i9300.
Report your own post and ask a moderator to move it.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Actually it is a GT-I9300 the heading was a typo which I have amended
XXALB is not a new firmware, it is very old and not sds safe. Downgrading from modern firmwares can create massive issues with the efs folder, if a factory reset doesn't solve it then you will need a backup of your efs folder, from v1.
gbswales said:
Actually it is a GT-I9300 the heading was a typo which I have amended
Click to expand...
Click to collapse
The problem is that the back up I had on the external SD card was corrupted and I lost an older back up in a computer crash - this one was listed in the set of instructions for installing stock rom on the S3.
However your post reminded me that I could do a factory reset from recovery mode (it is over a year since I last did any rooting etc!!)
Hey Presto it worked and I now have a fully functioning S3 albeit with earlier firmware but I can update that with kies
So thanks for you prompt - kudos to you
I've been struggling this morning with my unbranded UK S6 Edge to get it to install a Vodafone UK ROM with the VOD CSC.
This is so I can setup native WiFi calling on Vodafone, which was added to my account yesterday,
The problem is that the stock Vodafone UK ROMs are multi-CSC, and no matter what I do when I flash one of them, I end up with a CSC of SIM (Slovakia), when what I need to VOD.
It seems that the *#272*<IMEI># code doesn't work any more, and I really don't want to root this device if at all possible, unless there's a safe way to do so without tripping KNOX.
Is there a way to do this, or otherwise repackage the stock VF ROM so that it only includes the CSC I'm interested it?
Cheers,
Dave
foxmeister said:
I've been struggling this morning with my unbranded UK S6 Edge to get it to install a Vodafone UK ROM with the VOD CSC.
This is so I can setup native WiFi calling on Vodafone, which was added to my account yesterday,
The problem is that the stock Vodafone UK ROMs are multi-CSC, and no matter what I do when I flash one of them, I end up with a CSC of SIM (Slovakia), when what I need to VOD.
It seems that the *#272*<IMEI># code doesn't work any more, and I really don't want to root this device if at all possible, unless there's a safe way to do so without tripping KNOX.
Is there a way to do this, or otherwise repackage the stock VF ROM so that it only includes the CSC I'm interested it?
Cheers,
Dave
Click to expand...
Click to collapse
Hi Dave,
I've also got a BTU S6 EDGE which is on EE network. I wanted to use WIFI Calling feature which is only possible if the phone is running original EE firmware. The easiest way to do this is to download the latest VODAFONE UK firmware from Sammobile and flash it using using ODIN. No need to root and lose warranty. Just make sure you wipe Cache from Recovery menu after flashing new firmware to change your CSC to VOD.
Hope this helps.
Panesaam
panesaam said:
Hi Dave,
I've also got a BTU S6 EDGE which is on EE network. I wanted to use WIFI Calling feature which is only possible if the phone is running original EE firmware. The easiest way to do this is to download the latest VODAFONE UK firmware from Sammobile and flash it using using ODIN. No need to root and lose warranty. Just make sure you wipe Cache from Recovery menu after flashing new firmware to change your CSC to VOD.
Hope this helps.
Panesaam
Click to expand...
Click to collapse
Hi,
Thanks, but I've tried that. The problem is that the ROM is multi-CSC, and when applied it doesn't get the correct CSC that I require.
Regards,
Dave
Sent from my Nexus 6P using Tapatalk
foxmeister said:
Hi,
Thanks, but I've tried that. The problem is that the ROM is multi-CSC, and when applied it doesn't get the correct CSC that I require.
Regards,
Dave
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Hi Dave,
That's where WIPE CACHE from recovery will help. You might have to try that couple of times to pick up just VOD CSC. That was my case as well. I had EVR, BTU, XEU as CSC but after WIPE CACHE, it changed to just EVR.
Thanks
---------- Post added at 06:43 PM ---------- Previous post was at 06:39 PM ----------
The other way is, if you can find VODAFONE S6 EDGE Serial Number (NOT IMEI number) from somewhere then you can use emergency firmware recovery option from Samsung SmartSwitch and flash Vodafone firmware that way. It will reset your phone to factory setting but with Vodafone firmware on it.
panesaam said:
Hi Dave,
That's where WIPE CACHE from recovery will help. You might have to try that couple of times to pick up just VOD CSC. That was my case as well. I had EVR, BTU, XEU as CSC but after WIPE CACHE, it changed to just EVR.
Thanks
Click to expand...
Click to collapse
Tried it at least 6 times - CSC stayed as SIM.
That was with 2 different Vodafone ROMs.
Cheers,
Dave
Sent from my Nexus 6P using Tapatalk
I've got the reverse issue. My phone is multi CSC and I want to use the ATT firmware in hopes of gaining Samsung Pay. I have the 925F variant and the ATT variant is 925A.
I read somewhere that it is possible but this was tried with an unlocked S5 which was flashed with carrier firmware and gained the desired CSC but then it was locked to that carrier.
foxmeister said:
I've been struggling this morning with my unbranded UK S6 Edge to get it to install a Vodafone UK ROM with the VOD CSC.
This is so I can setup native WiFi calling on Vodafone, which was added to my account yesterday,
The problem is that the stock Vodafone UK ROMs are multi-CSC, and no matter what I do when I flash one of them, I end up with a CSC of SIM (Slovakia), when what I need to VOD.
It seems that the *#272*<IMEI># code doesn't work any more, and I really don't want to root this device if at all possible, unless there's a safe way to do so without tripping KNOX.
Is there a way to do this, or otherwise repackage the stock VF ROM so that it only includes the CSC I'm interested it?
Cheers,
Dave
Click to expand...
Click to collapse
You need to do a factory reset for the new CSC package to be applied - I'd suggest you disable auto reboot in Odin, flash the VOD firmware via Odin, and then boot straight into recovery from download mode, without booting the phone. Do a factory reset from there, and you should see the new CSC being applied.
nofam said:
You need to do a factory reset for the new CSC package to be applied - I'd suggest you disable auto reboot in Odin, flash the VOD firmware via Odin, and then boot straight into recovery from download mode, without booting the phone. Do a factory reset from there, and you should see the new CSC being applied.
Click to expand...
Click to collapse
Tried it, several times!
Sent from my Nexus 6P using Tapatalk
foxmeister said:
Tried it, several times!
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Have tried doing the hard factory reset from the dialer once the phone has booted?
nofam said:
Have tried doing the hard factory reset from the dialer once the phone has booted?
Click to expand...
Click to collapse
Looked up the hard reset code MRI codes, but it doesn't do anything on my device.
I spent another few hours flashing and refreshing VOD ROMs, and wiping phone and cache. The CSC always remained at SIM.
Sent from my Nexus 6P using Tapatalk
Is this still an issue for you or were you able to resolve it? I've got exactly the same problem - stuck on Slovakian country code. In the end I just re-flashed BTU and lived without wi-fi calling but i'd like to know if there is a workaround.
foxmeister said:
Looked up the hard reset code MRI codes, but it doesn't do anything on my device.
I spent another few hours flashing and refreshing VOD ROMs, and wiping phone and cache. The CSC always remained at SIM.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
greenredblue said:
Is this still an issue for you or were you able to resolve it? I've got exactly the same problem - stuck on Slovakian country code. In the end I just re-flashed BTU and lived without wi-fi calling but i'd like to know if there is a workaround.
Click to expand...
Click to collapse
I gave up and went with the Marshmallow beta instead.
Sent from my Nexus 6P using Tapatalk
solved
panesaam said:
Hi Dave,
I've also got a BTU S6 EDGE which is on EE network. I wanted to use WIFI Calling feature which is only possible if the phone is running original EE firmware. The easiest way to do this is to download the latest VODAFONE UK firmware from Sammobile and flash it using using ODIN. No need to root and lose warranty. Just make sure you wipe Cache from Recovery menu after flashing new firmware to change your CSC to VOD.
Hope this helps.
Panesaam
Click to expand...
Click to collapse
same here with an edge plus, but i did solve it ...the csc was stuck on SIM WHICH SLOVANIA....had to root phone, install supersu, install csc changer..all from play store...use csc changer and change it to VOD the phone will reboot....it might get stuck on boot saying dm verification failed, just reboot it..then...DO NOT wipe cache, and DO NOT do a date reset....just let it reboot, and plug it in computer..use smart switch recovery software, and that will do it...but the wifi calling option is still not there, hope this helps....
Works
I had the same problem on a Edge+ and have solved it in a similar way:
http://forum.xda-developers.com/showpost.php?p=67079588&postcount=4
Any no-root solution?
It's something to do with the 2 different csc files in downloaded firmware one is just csc and one is home csc, download the right Vodafone firmware and when you put your csc file in on odin use the csc not home csc and that will flash the correct country code and automatically factory reset your phone whereas the home csc doesn't factory reset but unfortunately its irreversible unless you root your phone and then youll trigger Knox counter and lose warranty. But thats the only way you'll get VOD csc.
foxmeister said:
Tried it at least 6 times - CSC stayed as SIM.
That was with 2 different Vodafone ROMs.
Cheers,
Dave
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Hi, Im writting this threat to solve a problem with my s6 edge. Two weeks ago I bought a phone from Aliexpress, and when it came everithing was okey, it came with 5.1.1, so i decided to upgrade to 6.0.1. How the phone was new and i had no idea about which rom install I installed the 5 files rom XEU without making a backup of the EFS folder. After install it, the phone worked, but it wasn´t able to make calls or recieve SMS, the phone said "no registered on network". I tried to solve this problem installing a modem, but this aggravate the problem, appearing a prohibited sign in the status bar and with the IMEI and Baseband unknown. I tried to install another roms, but odin always failed, the only rom that odin let me install is the AP file of the 5 files XEU rom. I sent the phone to the Samsung technical service, and the said me that they can´t repair the phone because the phone is from Israel, and they only repair EU phone. The phone works, everything is okey but it can´t use the network services. How the technical service said me the phone is from Israel, and it came (if im not wrong) with this rom: "G925FXXU3COJ1_G925FOJK3COJ3_ILO" (5.1.1 rom from Israel), but now the only rom that works is "AP_G925FXXS3DPB1_CL7025264_QB8758701_REV02_user_low_ship.tar.md5" (the AP file from the 5 files 6.0.1 XEU rom). I don´t know how to solve the problem, the phone is totally new, and when I try to install any rom Odin gets fail. Can anybody help me? Is the first time I buy a good phone and on the third day it gets broken. Any solution? Please help me, thanks. (Sorry for my bad English, I´m from Spain)
jujomar said:
Hi, Im writting this threat to solve a problem with my s6 edge. Two weeks ago I bought a phone from Aliexpress, and when it came everithing was okey, it came with 5.1.1, so i decided to upgrade to 6.0.1. How the phone was new and i had no idea about which rom install I installed the 5 files rom XEU without making a backup of the EFS folder. After install it, the phone worked, but it wasn´t able to make calls or recieve SMS, the phone said "no registered on network". I tried to solve this problem installing a modem, but this aggravate the problem, appearing a prohibited sign in the status bar and with the IMEI and Baseband unknown. I tried to install another roms, but odin always failed, the only rom that odin let me install is the AP file of the 5 files XEU rom. I sent the phone to the Samsung technical service, and the said me that they can´t repair the phone because the phone is from Israel, and they only repair EU phone. The phone works, everything is okey but it can´t use the network services. How the technical service said me the phone is from Israel, and it came (if im not wrong) with this rom: "G925FXXU3COJ1_G925FOJK3COJ3_ILO" (5.1.1 rom from Israel), but now the only rom that works is "AP_G925FXXS3DPB1_CL7025264_QB8758701_REV02_user_low_ship.tar.md5" (the AP file from the 5 files 6.0.1 XEU rom). I don´t know how to solve the problem, the phone is totally new, and when I try to install any rom Odin gets fail. Can anybody help me? Is the first time I buy a good phone and on the third day it gets broken. Any solution? Please help me, thanks. (Sorry for my bad English, I´m from Spain)
Click to expand...
Click to collapse
Have You tried restoring ur phone with samsung smart switch ??
Bt U should have backed up the efs Anyway Try Smart Switch Maybe Ur Phone will bootup
Good Luck
osman34 said:
Have You tried restoring ur phone with samsung smart switch ??
Bt U should have backed up the efs Anyway Try Smart Switch Maybe Ur Phone will bootup
Good Luck
Click to expand...
Click to collapse
Yes I have tried with Samsung Smart Switch, but Nothing, it don't let me restore the phone
Try flashing a firmware with the number 4
For example I flashed with G925FXXU4DPGW
If you try to flash with a firmware with 3 in the place of 4 it might not work. So try it.
jujomar said:
Hi, Im writting this threat to solve a problem with my s6 edge. Two weeks ago I bought a phone from Aliexpress, and when it came everithing was okey, it came with 5.1.1, so i decided to upgrade to 6.0.1. How the phone was new and i had no idea about which rom install I installed the 5 files rom XEU without making a backup of the EFS folder. After install it, the phone worked, but it wasn´t able to make calls or recieve SMS, the phone said "no registered on network". I tried to solve this problem installing a modem, but this aggravate the problem, appearing a prohibited sign in the status bar and with the IMEI and Baseband unknown. I tried to install another roms, but odin always failed, the only rom that odin let me install is the AP file of the 5 files XEU rom. I sent the phone to the Samsung technical service, and the said me that they can´t repair the phone because the phone is from Israel, and they only repair EU phone. The phone works, everything is okey but it can´t use the network services. How the technical service said me the phone is from Israel, and it came (if im not wrong) with this rom: "G925FXXU3COJ1_G925FOJK3COJ3_ILO" (5.1.1 rom from Israel), but now the only rom that works is "AP_G925FXXS3DPB1_CL7025264_QB8758701_REV02_user_low_ship.tar.md5" (the AP file from the 5 files 6.0.1 XEU rom). I don´t know how to solve the problem, the phone is totally new, and when I try to install any rom Odin gets fail. Can anybody help me? Is the first time I buy a good phone and on the third day it gets broken. Any solution? Please help me, thanks. (Sorry for my bad English, I´m from Spain)
Click to expand...
Click to collapse
Just flash the stock firmware for your region.
Or try to flash stock XEU or BTU. Most international firmwares and multi csc firmwares come with efs or modem files.
If you are trying to flash a branded firmware this could be why as this happened when I tried to flash EVR rom.
I can link you to the stock XEU download that I'm using.
If you get an fail in odin let me know where it fails... example hidden.img fail or system.img fail.
callumbr1 said:
Just flash the stock firmware for your region.
Or try to flash stock XEU or BTU. Most international firmwares and multi csc firmwares come with efs or modem files.
If you are trying to flash a branded firmware this could be why as this happened when I tried to flash EVR rom.
I can link you to the stock XEU download that I'm using.
If you get an fail in odin let me know where it fails... example hidden.img fail or system.img fail.
Click to expand...
Click to collapse
Hi Callumbr1, I´ve tried to install the 5.1.1 rom of my country (spain), but Odin gets fail, at first it fails at "cm.bin" archive, so I deleted it from the tar archive, then I flash the rom again and another Odin problem, it failed at "hidden.img", so I also deleted it from the tar archive, afterwards I flash again and another odin problem at "sboot.bin" (this sboot archive always fail when I try to flash a rom), so I also deleted it. After having removed the 3 archives from the original tar archive (the rom was G925FXXU3COI9_G925FPHE3COI6_PHE), the rom started to flash normally but after it the phone gets stuck on Samsung galaxy S6 edge logo.
I also have tried to install the 5.1.1 XEU (G925FXXU3COI9_G925FOXA3COI9_XEU), but also same problem at "hidden.img" and at "sboot.bin", after deleting them, another bootloop. What can I do? Maybe I have to start trying to flash 6.0.1 roms, I will also try to flash roms with number 4 how Subhy259 said. What do you think Callumbr1, what can I do?
jujomar said:
Hi Callumbr1, I´ve tried to install the 5.1.1 rom of my country (spain), but Odin gets fail, at first it fails at "cm.bin" archive, so I deleted it from the tar archive, then I flash the rom again and another Odin problem, it failed at "hidden.img", so I also deleted it from the tar archive, afterwards I flash again and another odin problem at "sboot.bin" (this sboot archive always fail when I try to flash a rom), so I also deleted it. After having removed the 3 archives from the original tar archive (the rom was G925FXXU3COI9_G925FPHE3COI6_PHE), the rom started to flash normally but after it the phone gets stuck on Samsung galaxy S6 edge logo.
I also have tried to install the 5.1.1 XEU (G925FXXU3COI9_G925FOXA3COI9_XEU), but also same problem at "hidden.img" and at "sboot.bin", after deleting them, another bootloop. What can I do? Maybe I have to start trying to flash 6.0.1 roms, I will also try to flash roms with number 4 how Subhy259 said. What do you think Callumbr1, what can I do?
Click to expand...
Click to collapse
What firmware was you on before? Was it 6.0.1? Is so you have to flash a 6.0.1 rom. You can't flash from 6.0.1 to 5.1.1.
Hidden.img fail means you need pit file for partitions.
Was the device unlocked when you got it? It could have locked bootloader which means you will have to flash the firmware it came with.
http://www.sammobile.com/firmwares/download/85917/G925FXXU4DPGW_G925FOXA4DPGW_XEU/
Flash this firmware see if this works. It's multi csc European so should work.
If you get any errors copy the odin log to here so I can see. The good news is its not bricked. We just need to find the firmware that will flash
callumbr1 said:
What firmware was you on before? Was it 6.0.1? Is so you have to flash a 6.0.1 rom. You can't flash from 6.0.1 to 5.1.1.
Hidden.img fail means you need pit file for partitions.
Was the device unlocked when you got it? It could have locked bootloader which means you will have to flash the firmware it came with.
http://www.sammobile.com/firmwares/download/85917/G925FXXU4DPGW_G925FOXA4DPGW_XEU/
Flash this firmware see if this works. It's multi csc European so should work.
If you get any errors copy the odin log to here so I can see. The good news is its not bricked. We just need to find the firmware that will flash
Click to expand...
Click to collapse
Callumbr1 I´ve alrready installed the rom you said (without any problem) and now the phone detects the sim and has the correct IMEI and S/N, but when I try to call or use the network the phone says "Not registered on network", why is this happening? How can I solve this? It´s a modem problem?
jujomar said:
Callumbr1 I�´ve alrready installed the rom you said (without any problem) and now the phone detects the sim and has the correct IMEI and S/N, but when I try to call or use the network the phone says "Not registered on network", why is this happening? How can I solve this? It�´s a modem problem?
Click to expand...
Click to collapse
Go on to settings then reset. Reset network settings. then go onto mobile networks, set to LTE/3g/2g. Set work network to auto. Reboot phone and should work
Or set the network to the same as your sim
callumbr1 said:
Go on to settings then reset. Reset network settings. then go onto mobile networks, set to LTE/3g/2g. Set work network to auto. Reboot phone and should work
Or set the network to the same as your sim
Click to expand...
Click to collapse
I've tried that but still on "Not registered on network" (it should be a phone problem because the sim works in other phones), I think it's a modem problem, maybe flashing the modem of another rom could work. What do you think?
jujomar said:
I've tried that but still on "Not registered on network" (it should be a phone problem because the sim works in other phones), I think it's a modem problem, maybe flashing the modem of another rom could work. What do you think?
Click to expand...
Click to collapse
I would say to flash a firmware that is branded by the network you have.
callumbr1 said:
I would say to flash a firmware that is branded by the network you have.
Click to expand...
Click to collapse
How do I know which firmware is branded with the network I have?
jujomar said:
How do I know which firmware is branded with the network I have?
Click to expand...
Click to collapse
What is your sim network? And region?
callumbr1 said:
What is your sim network? And region?
Click to expand...
Click to collapse
My SIM operator is Orange and my region is Spain. I have tried to install the last 6.0.1 Spanish and the rom was almost flashed when Odin failed at hidden.img ://
jujomar said:
My SIM operator is Orange and my region is Spain. I have tried to install the last 6.0.1 Spanish and the rom was almost flashed when Odin failed at hidden.img ://
Click to expand...
Click to collapse
Download this app...
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Send me screen shots of the general, csc and firmware page.
Once I find this I can tell you what pit file you need to flash
callumbr1 said:
Download this app...
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Send me screen shots of the general, csc and firmware page.
Once I find this I can tell you what pit file you need to flash
Click to expand...
Click to collapse
Looks like this
callumbr1 said:
Looks like this
Click to expand...
Click to collapse
That's the photo
subhy259 said:
Try flashing a firmware with the number 4
For example I flashed with G925FXXU4DPGW
If you try to flash with a firmware with 3 in the place of 4 it might not work. So try it.
Click to expand...
Click to collapse
It worked, now the phone has correct IMEI and Baseband but says "Not registered on network", any idea?
jujomar said:
That's the photo
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...it-files-multi-thread-download-t3171636/page1
Look at this thread. You need the top pit file zerolte_eur_open.pit
In odin you need to insert the firmware into AP again and click on pit where the options are. Insert the downloaded pit file and make sure re partition and f.reset is checked and then flash.
callumbr1 said:
http://forum.xda-developers.com/gal...it-files-multi-thread-download-t3171636/page1
Look at this thread. You need the top pit file zerolte_eur_open.pit
In odin you need to insert the firmware into AP again and click on pit where the options are. Insert the downloaded pit file and make sure re partition and f.reset is checked and then flash.
Click to expand...
Click to collapse
(I forgot some photos) I'll try what you say