Related
Hello frend's i am new in this forum ,
i did a big mistake first i rooted my xperia 10mini and use 2.2 rom then i try to recover my phone in original version 2.1 . When i try and restart my phone and press back button it's goes to recovery mode not automatically recovered so i delete from c drive recovery.tar file and two more file now my phone is stuck on lobo of android doll. What to do i son't know please help me my phone is going to die.
Easy get seus and reflash your phone stock or boot into recovery ,,, using charging phone power on phone unplug charger use a back up ,,if you can't start again rember to do back ups
saurabh12311 said:
Hello frend's i am new in this forum ,
i did a big mistake first i rooted my xperia 10mini and use 2.2 rom then i try to recover my phone in original version 2.1 . When i try and restart my phone and press back button it's goes to recovery mode not automatically recovered so i delete from c drive recovery.tar file and two more file now my phone is stuck on lobo of android doll. What to do i son't know please help me my phone is going to die.
Click to expand...
Click to collapse
thanks again slade 87 ,sent from x10 mini pro cm7 15.0 ,,,,also on you tube (totalchris08) xbox360 (kormatoes ne5 ) ps3 (langtoes) ask my anything , I COULD KNOW THE ANSER OR I MIGHT NOT ,
still hanging in death rope
thanks 4 reply but my phone is even not going to switch off . again & again it'll starts and cyanogen logo is came the phone starts and this type msg showing which is stick until phone start again SORRY THE APPLICATION LAUNCH PRO()
PROCESS ANDROID.PROCESS.ACORE)HAS STOPPED UNXPECTALY.PLEASE TRY AGAIN
PLEASE HELP ME BRO IF ANY OTHER PROCESS IS THERE TO RECOVER MY PHONE PLEASE TELL ME IN DETAIL IF U HAVE ANY VIDEO THEN SEND ME A LINK PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Ooooooo you have a mini ,,,not pro ok you got the rong rom ok there is a hard reset. http://www.youtube.com/watch?v=2cvExle8S4o&feature=youtube_gdata_player
saurabh12311 said:
thanks 4 reply but my phone is even not going to switch off . again & again it'll starts and cyanogen logo is came the phone starts and this type msg showing which is stick until phone start again SORRY THE APPLICATION LAUNCH PRO()
PROCESS ANDROID.PROCESS.ACORE)HAS STOPPED UNXPECTALY.PLEASE TRY AGAIN
PLEASE HELP ME BRO IF ANY OTHER PROCESS IS THERE TO RECOVER MY PHONE PLEASE TELL ME IN DETAIL IF U HAVE ANY VIDEO THEN SEND ME A LINK PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Click to expand...
Click to collapse
,sent from x10 mini pro cm7 15.0 ,,,,also on you tube (totalchris08) xbox360 (kormatoes ne5 )
I DID ALL SUCH THINGS BUT NOTHING GO RIGHT 4 ME IS THERE ANY OTHER SOLUTION ,I READ ABOUT FLASHTOOL IN FORUM CAN U PLZ EXPLAIN IF BY THIS I CAN DO SOMTHING BUT PLZ EXPLAIN IN DETAIL
I had the same issue it restarts by itself n go into looping, remove the battery place it back, connect ur phone to SEUS by holding back button and plugging the USB
xperia mini10
in mini 10 battery is not removable & my basic operating files are deleted show when there is no operating file how it'll starts a home screen thats y i m asking u and other frend's is there any other method to re install operating 2.1 or any thing to start my phone again so i can do after that any thins otherwise nothing is worth 4 me saddddddddddddd
If your recovery (xrecovery or clockwordmod) works fine, what about removing your SD and plug it to a PC in order to copy a 2.1 ROM and then install it through recovery?
please ell me
plz tell me in which folder i'll put that files , basically allready tried all even my update zip is also there how to do and wht 2 do plz explain is there any method to recover from sdcard or through any other software
is there xrecovery file work from pc do u have exe file so plz sen me
[email protected]
is there any method to format c drive of phone bcs when ever i'm trying
through pc companion it'll tell in last stage to use usb storage but y phone is not starting so how could i do this nothing work 4 me plzzzzzzzzzzz any one give me solution I'm very depress my phone is even not going to switch off it'll starts again & again until battery drained
i deleted my three files from c/: x recovery.tar, con. & busy box
saurabh12311 said:
when ever i'm trying through pc companion it'll tell in last stage to use usb storage but y phone is not starting
Click to expand...
Click to collapse
That's weird because 7 hours after i brought my X10 mini pro i already bricked it , so i fire up SE PC companion and i followed the instruction to _repair_ the phone and no access to USB storage was needed that i remember.
It simply downloads and flash to your phone.
Unfortunately i'm still a newbie so i suppose and i haven't all the right answers
Keep trying with SE repairing and good luck with that!
Oops sorry, click the reset button, dnt turn your cell on, press the back button plug in the usb u'll see the green light!
if works then tell me...
ps: u said u deleted ur xrecovery.tar nd cant boot into recovery, how the hell u think u'll be able to install zip from sdcard??? Only way u have is SEUS or try using bin4ry's flashtool, download mini's1.1 rom....
Oops sorry, click the reset button, dnt turn your cell on, press the back button plug in the usb u'll see the green light!
if works then tell me...
ps: u said u deleted ur xrecovery.tar nd cant boot into recovery, how the hell u think u'll be able to install zip from sdcard??? Only way u have is SEUS or try using bin4ry's flashtool, download mini's1.1 rom....
thanks dear but finally my phone is ded I sent my phone to customer center but after checking they told me no hope phone will not recoverd..........
half knowledge is always dangerous is true for me I lost my money
There is no way that seus could not fix your phone and even if it couldnt se has a duty to repair it free of charge in the first 12 months !
Sent from my U20i using XDA Premium App
SEUS wont fail!
galvic said:
SEUS wont fail!
Click to expand...
Click to collapse
Quote that and DON'T THROW IT AWAY. USE flashtool. I got mine bricked and that was a great solution.
If you still have it i'm gonna show you a guide to flashtool
my x10i v2.3.3 batt was running low at 8%... so i turn it off from my work place... when i reach home and turn my phone on, my phone only vibrate abit and nothing was happen... so i tot my phone battery is flat so i when to charge it... but when i charge the phone nothing happens too.. i try take out the batt and put it back afew times but still not working... so i tot is my software facing problem and i use PCC and SEUS to repair... but it say can't install update try again.. i do it around 3 to 4 times... but still the same.. now my phone when i press on it blink green led once and nothing happen... but when i plug in my charger, the led turn green but in black screen... so can any1 help me fix tis.. thanks...
Hey, 'm facing the same issue
Recently i upgraded my Xperia to "ThGo2 v16.0" from custom rom..
After some time the rom got unstable and restarted the phone, however it wouldn't boot up. Now i have completely black screen, all the time, with few red blinks
(I have tried all the solutions here:
1. SEUS : Says ur phone is already update and show Xperia arc in backgroud. No update available
2. PC companion: Tried all the tricks to start w/o connecting n all still the phone is not detected.
3. Flashtool, tried flashing it with 0.6.8 and 0.2.9.1
4. I have also used other tools like superclick, root / unroot and S1 tool (no of them worked)
Now, nothing is working with few red blinks and gree light..
Please help, my phone is converted into a black paper weight now....
Use pc companion. Or flashtool
Sent from my X10 using xda premium
Nopes
I have tried all the method, right from SEUS, PC Companion and flash tool nothing is working.....
Is this an Hard brick, case, one of the technician suggested me an full flash through box, for which he will charge me INR 1500 (USD 30)...what do you think ?
surajpardeshi said:
I have tried all the method, right from SEUS, PC Companion and flash tool nothing is working.....
Is this an Hard brick, case, one of the technician suggested me an full flash through box, for which he will charge me INR 1500 (USD 30)...what do you think ?
Click to expand...
Click to collapse
U from India? Know hindi?
Sent from my X10 using xda premium
Me too BRICKED or Semi Bricked.... =(
First fail PCC
Then PCC Repair fail too
SEUS fail.
Took to different computer that was finally able to flash 2.1.1 update last year.
Clean install of pcc and seus Both still fail
In fact pic with yellow is from that fail & all others (Using Flashtool) except X10a_2.2.1.A.0.6_Rogers.ftf I get regular triangle with ! over top of phone pic after SE I've exhausted ALL my efforts and need guidance. I am super broke right now, so repair shop not good option. Two shops here in town say they will try, but NO PROMISES and still must pay for time
NEED True rescue fix here
Hindi yes
Yeah, I'm from Nashik, India, but I visit Mumbai frequently..
You, know any place where I can get this done in a cheaper way.....
surajpardeshi said:
Yeah, I'm from Nashik, India, but I visit Mumbai frequently..
You, know any place where I can get this done in a cheaper way.....
Click to expand...
Click to collapse
Right now i am bit busy. I will upload a pic for u as soon as i get free.
Sent from my X10 using xda premium
Using pcc... Even on "no phone connected"
Help us!!!
Can any1 out there help us fix tis problem or tell us what happen to our phone... or izzit our X10i is hopeless????
Pls help us....T_T
enzo1984316 said:
Can any1 out there help us fix tis problem or tell us what happen to our phone... or izzit our X10i is hopeless????
Pls help us....T_T
Click to expand...
Click to collapse
Did you try to read the above post at all?
Sent from my X10 using xda premium
i try PCC, SEUS and FLASHER.... All cannot work... i dunno what to do now...
btw... when my phone won't turn on that time my batt is low(Cos cannot charge) and debugging mode is off... izzit this problem make me can't do repair and reflash???
enzo1984316 said:
i try PCC, SEUS and FLASHER.... All cannot work... i dunno what to do now...
btw... when my phone won't turn on that time my batt is low(Cos cannot charge) and debugging mode is off... izzit this problem make me can't do repair and reflash???
Click to expand...
Click to collapse
Charge your battery using another x10 or any external charger
Sent from my X10 using xda premium
FIX!
I had the same issue when I was experimenting with ROMs and Recoverys, but not to worry, Sony PC Companion 2.1 does the trick!
Download PC Companion 2.1 from the Sony Mobile website
1. When you download and open it, click start under Support Zone
2. Click start under Phone Software Update
3. When the window saying that a phone could not be found appears, click repair phone
4. A windows like this will appear, click continue to proceed with the repair of the firmware
NOTE: All data that is placed on the phone memory will be wiped but any data saved on the memory card will be spared
5. After clicking continue, a window like so will appear. Tick the box and click next to continue with repair!
6. Sony PC Companion 2.1 will now prepare the computer for the firmware update
7. Now choose your phone model, in this case it should be the Xperia X10 (X10). Select the phone and click Next!
8. Follow the prompts to repair your phone!
GOOD LUCK!!
Always fails for me.
All process end in fail
There must be a file I need to rename or something....
tried everything now...
I have tried everything by now, here i have attached a attachment of error i get while repairing my phone through SEUS..
only option is box flash, but i think its kind of risky...
Fail fail fail..... i'm getting hopeless wif my X10
Hey,
I did some re-search and got to know that somehow my X10 flashes as So-01C in some systems, i.e. xperia arc, even while updating ..........
Anyone here, knows other ways to flash through box other than technician, coz these technicians are real idiot they can crap your phone in 10 seconds, so its better to crap it yourself...
"alternative to box flash, please ???"
Try this
Had the same problem once, when my phone would not start at all, all I had to do was connect it to the PC Companion (2.0), at first it wouldn't repair but after a certain amount of tries it did the trick,
First: Make sure all your drivers are installed, if they were installed there should be no problem.
If they were not, the computer cannot identify your phone, try installing some other x10's drivers (cause your's is bricked I assume) that might do the trick aswell.
Open PC Companion > Support Zone > Phone Software Update (Start) > Follow Instructions > Repair
It might take several tries to get it right
If this doesn't work try the latest flashtool, it should do the trick !!
There must be something you are not doing right, else SEUS/Flashtool should have worked like a charm.
see i get this reply, when updating x10..
I have tried this like thousands of times, installing roms and then removing them and repairing the phone, but this time it has gone over my head........
I need to flash my X10 Mini, but I can't find the firmware for It anywhere with a working link. Anyone that still have the file and willing to share?
There are only plenty of links to sites that are down
I tried to install MiniCM7-2.1.9-robyn on the phone and then afterwards it just won't start anymore, so i need to flash it and then use SEUS to restore it.
UPDATE!
I found everything and fixed everything I needed by just flashing It with a stock kernel.
Just use the Repair option in Pc Companion.
Here
leajian said:
Just use the Repair option in Pc Companion.
Click to expand...
Click to collapse
wont work because I can't even get into the menus, I turn it on and It gets stuck on a screen with little backlight, but no SE logo
TrissyGE said:
Here
Click to expand...
Click to collapse
I'm not looking for how to do It..... Read the question before you post. I appreciate you trying to help, but at least understand what the question Is first.
I'm looking for the firmware for the flashtool so I can flash my device (.ftf file)
They guides that teaches you how to fix a bricked phone got links to megaupload (that got shutdown not long ago) and multiupload (also got shutdown) for the firmware I'm looking for.
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Ticklefish said:
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
leajian said:
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
Click to expand...
Click to collapse
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
TazBaz said:
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
Click to expand...
Click to collapse
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Ticklefish said:
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
TazBaz said:
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
Click to expand...
Click to collapse
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Hello there!!! I had the same problem just yesterday and I was about to get crazy in order to solve it...and then I found this post which was definately useful!!!! Just follow every single step and it will get back to work...btw I still can't flash the nAa-11 kernel with flashtool...it keeps on saying error and the flashing doesn't work
http://forum.xda-developers.com/showpost.php?p=20251565&postcount=8
leajian said:
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Click to expand...
Click to collapse
I will try that thanks, but you need to hard reset before the repair with PC Companion?
I managed to find the stock kernel so now I'm starting the device, but I get a SE logo and then It shuts off.
One problem when I try to repair on step 2 (prepare step) I get a error unable to start or phone update update components. (the pc companions is installed with the newest version)
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
did you try flashing any stock ftf rom file using flashtool?
or repair using PCC or SEUS.
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Repair with Pc Companion or Update Service
Instructions:
Hold your back button (3button) , then connect with ur USB to x10 untill the LED light appear, after that wAAAit ur cpu install ur driver, then go pcc update ur phone, if it pop out that u have last software just continue it , AAAfter that all, ur bricked x10 hAAAve been repair
Hope helps
Superman™
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
gordonx10i said:
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
Click to expand...
Click to collapse
Then I guess you cant do anything about it
Also if if it wont boot in recovery or to the rom I dont think SE people can know that its running unofficial roms
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Hey gordonx10i, did you try with "x10_2.3_aro"?
Try flash by this, then try to start xRecovery into SEXperia
Check the following XDA Post: http://forum.xda-developers.com/showthread.php?p=16118511
Directly link provided by efx_d3
http://mir.cr/0OIDEZNA
Problem is device not even seen by pc anymore it so dunno how to get it into flash mode is there perhaps not a script exploit that can be run from sd card ......
Sent from my GT-P7500 using xda app-developers app
How to get back to stock even with a broken USB
While I think this might help you :
http://forum.xda-developers.com/showthread.php?t=1054818
Take care mate !
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
+1 on that
Always works
If you had ferakernel, you don't even need to hold back lol
Sent from my Xperia X10 using xda premium
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
ARO 2.3.3 kernal saved my life bro, i think you'll have the same luck too go ahead with that :good:
Unbricked from se logo screen
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
raghava_teja said:
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
Click to expand...
Click to collapse
Glad it helped
Sent from my X10
does this method can fix my problem also?
also got stuck bootloader,
because of trying to unlock bootloader..
i guess its my fault, tryng to unlock while im in custom rom?
currently im downloading 2.3.3 stock rom,
and will try to flash it later..
ive tried already PCC and SEUS and still no luck.. (no available updates) =(
THeLogiC said:
Glad it helped
Sent from my X10
Click to expand...
Click to collapse
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
jrennald said:
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
Click to expand...
Click to collapse
No problem again
Sent from my X10
THeLogiC said:
No problem again
Sent from my X10
Click to expand...
Click to collapse
Remember guys X10 can't be bricked... it can always be unbricked and that too very easily all required is bit of patience to go through the forum
Sent from my Transformer TF101 using xda app-developers app
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help